Firewall old

Please note! This wiki is no longer maintained. Our documentation has moved to https://securityonion.net/docs/. Please update your bookmarks. You can find the latest version of this page at: https://securityonion.net/docs/Firewall-old.

This page contains legacy information for versions of Setup older than securityonion-setup - 20120912-0ubuntu0securityonion201.

If you're running securityonion-setup - 20120912-0ubuntu0securityonion201 or newer, please see the current firewall documentation.

UFW - Uncomplicated Firewall

The default firewall configuration tool for Ubuntu is ufw. ufw is enabled by default on Security Onion.

Enable/Disable

sudo ufw enable

sudo ufw disable

Allow/Deny

example: allow port 9876 for Xplico

sudo ufw allow 9876/tcp

example: allow irc port range 6667 - 7000

sudo ufw allow 6667:7000

example: deny https

sudo ufw deny 443

What Ports Are Opened/Listening

example

sudo ufw status

example output

Status: active

To                         Action      From
--                         ------      ----
22/tcp                     ALLOW       Anywhere
7734/tcp                   ALLOW       Anywhere
7736/tcp                   ALLOW       Anywhere
443/tcp                    ALLOW       Anywhere

More Info

For more info you can visit the UFW documentation site

Note: Gufw is a GUI front end for the ufw.

Tightening the firewall on a master server

By default, older versions of Setup configure a master server to allow connections to the following ports from any IP address:

• 22 - SSH
• 443 - Squert/ELSA/CapMe
• 514 - Syslog
• 1514/udp - OSSEC
• 7734 - Sguil client
• 7736 - sensor connection to sguild

You may want to restrict those ports to only accepting connections from a subset of IP addresses.

NOTE! Before attempting any firewall changes, you should always ensure you have a backup plan should you accidentally block your own connection. So make sure that you have DRAC/KVM/physical or some other form of access.

Firewall rules to allow sensors to connect to master

First, add a rule like the following for each of your sensors (replacing a.b.c.d with the actual IP address of the sensor) to connect to ports 22 (SSH) and 7736 (sguild):

sudo ufw allow proto tcp from a.b.c.d to any port 22,7736

-OR-

If you're running Salt, then sensors need to connect to ports 4505/tcp and 4506/tcp:

sudo ufw allow proto tcp from a.b.c.d to any port 22,4505,4506,7736

Firewall rules to allow syslog devices

Next add a rule like the following for the IP addresses that will be sending syslog (port 514 tcp and udp):

sudo ufw allow from a.b.c.d to any port 514

Firewall rules to allow OSSEC agents

Next add a rule like the following for the IP addresses that will be running the OSSEC agent (port 1514 udp):

sudo ufw allow proto udp from a.b.c.d to any port 1514

Firewall rules to allow analysts/administrators to connect to master

Then add a rule like the following for the IP addresses or subnet that you'll be using to connect to the master as an analyst/administrator to ports 22 (SSH), 443 (Squert/ELSA/CapMe), 7734 (Sguil client):

sudo ufw allow proto tcp from a.b.c.d to any port 22,443,7734

Remove default "allow from Anywhere" rules

Once you've added these new rules, then you can remove the default "allow from Anywhere" rules.

sudo ufw delete allow 22/tcp 
sudo ufw delete allow 443/tcp
sudo ufw delete allow 444/tcp
sudo ufw delete allow 514
sudo ufw delete allow 1514/udp
sudo ufw delete allow 3154/tcp
sudo ufw delete allow 7734/tcp
sudo ufw delete allow 7736/tcp

Tightening the firewall on a sensor

By default, a sensor allows connections to the following ports from any IP address:

• 22 - SSH
• 514 - Syslog
• 1514/udp - OSSEC

You may want to restrict those ports to only accepting connections from a subset of IP addresses.

NOTE! Before attempting any firewall changes, you should always ensure you have a backup plan should you accidentally block your own connection. So make sure that you have DRAC/KVM/physical or some other form of access.

Firewall rules to allow syslog devices

First, add a rule like the following for the IP addresses that will be sending syslog (port 514 tcp and udp):

sudo ufw allow from a.b.c.d to any port 514

Firewall rules to allow OSSEC agents

Next add a rule like the following for the IP addresses that will be running the OSSEC agent (port 1514 udp):

sudo ufw allow proto udp from a.b.c.d to any port 1514

Firewall rules to allow analysts/administrators to connect to master

Then add a rule like the following for the IP addresses or subnet that you'll be using to connect to the sensor as an analyst/administrator to ports 22:

sudo ufw allow proto tcp from a.b.c.d to any port 22

Remove default "allow from Anywhere" rules

Once you've added these new rules, then you can remove the default "allow from Anywhere" rules.

sudo ufw delete allow 22/tcp 
sudo ufw delete allow 514
sudo ufw delete allow 1514/udp