Improve sabayon config for BPF and CONFIG_NETWORK_PHY_TIMESTAMPING #5

geaaru · 2020-01-18T16:01:58Z

No description provided.

geaaru · 2020-01-25T15:06:25Z

It seems ok. I go ahead.

mudler

Looks good

[ Upstream commit 5eed6f1 ] Commit 9b6f7e1 ("mm: rework memcg kernel stack accounting") will result in fork failing if allocating a kernel stack for a task in dup_task_struct exceeds the kernel memory allowance for that cgroup. Unfortunately, it also results in a crash. This is due to the code jumping to free_stack and calling free_thread_stack when the memcg kernel stack charge fails, but without tsk->stack pointing at the freshly allocated stack. This in turn results in the vfree_atomic in free_thread_stack oopsing with a backtrace like this: #5 [ffffc900244efc88] die at ffffffff8101f0ab #6 [ffffc900244efcb8] do_general_protection at ffffffff8101cb86 #7 [ffffc900244efce0] general_protection at ffffffff818ff082 [exception RIP: llist_add_batch+7] RIP: ffffffff8150d487 RSP: ffffc900244efd98 RFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88085ef55980 RCX: 0000000000000000 RDX: ffff88085ef55980 RSI: 343834343531203a RDI: 343834343531203a RBP: ffffc900244efd98 R8: 0000000000000001 R9: ffff8808578c3600 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88029f6c21c0 R13: 0000000000000286 R14: ffff880147759b00 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffc900244efda0] vfree_atomic at ffffffff811df2c7 #9 [ffffc900244efdb8] copy_process at ffffffff81086e37 #10 [ffffc900244efe98] _do_fork at ffffffff810884e0 #11 [ffffc900244eff10] sys_vfork at ffffffff810887ff #12 [ffffc900244eff20] do_syscall_64 at ffffffff81002a43 RIP: 000000000049b948 RSP: 00007ffcdb307830 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 0000000000896030 RCX: 000000000049b948 RDX: 0000000000000000 RSI: 00007ffcdb307790 RDI: 00000000005d7421 RBP: 000000000067370f R8: 00007ffcdb3077b0 R9: 000000000001ed00 R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000040 R13: 000000000000000f R14: 0000000000000000 R15: 000000000088d018 ORIG_RAX: 000000000000003a CS: 0033 SS: 002b The simplest fix is to assign tsk->stack right where it is allocated. Link: http://lkml.kernel.org/r/[email protected] Fixes: 9b6f7e1 ("mm: rework memcg kernel stack accounting") Signed-off-by: Rik van Riel <[email protected]> Acked-by: Roman Gushchin <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Tejun Heo <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 42ffb0b ] There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 42ffb0b] There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 42ffb0b ] There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 96bf313ecb33567af4cb53928b0c951254a02759 ] There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 42ffb0b upstream. There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1d44616 upstream. We don't need to hold the local pinctrl lock here to set irq wake on the summary irq line. Doing so only leads to lockdep warnings instead of protecting us from anything. Remove the locking. WARNING: possible circular locking dependency detected 5.4.11 #2 Tainted: G W ------------------------------------------------------ cat/3083 is trying to acquire lock: ffffff81f4fa58c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 but task is already holding lock: ffffff81f4880c18 (&pctrl->lock){-.-.}, at: msm_gpio_irq_set_wake+0x48/0x7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pctrl->lock){-.-.}: _raw_spin_lock_irqsave+0x64/0x80 msm_gpio_irq_ack+0x68/0xf4 __irq_do_set_handler+0xe0/0x180 __irq_set_handler+0x60/0x9c irq_domain_set_info+0x90/0xb4 gpiochip_hierarchy_irq_domain_alloc+0x110/0x200 __irq_domain_alloc_irqs+0x130/0x29c irq_create_fwspec_mapping+0x1f0/0x300 irq_create_of_mapping+0x70/0x98 of_irq_get+0xa4/0xd4 spi_drv_probe+0x4c/0xb0 really_probe+0x138/0x3f0 driver_probe_device+0x70/0x140 __device_attach_driver+0x9c/0x110 bus_for_each_drv+0x88/0xd0 __device_attach+0xb0/0x160 device_initial_probe+0x20/0x2c bus_probe_device+0x34/0x94 device_add+0x35c/0x3f0 spi_add_device+0xbc/0x194 of_register_spi_devices+0x2c8/0x408 spi_register_controller+0x57c/0x6fc spi_geni_probe+0x260/0x328 platform_drv_probe+0x90/0xb0 really_probe+0x138/0x3f0 driver_probe_device+0x70/0x140 device_driver_attach+0x4c/0x6c __driver_attach+0xcc/0x154 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0x108/0x1fc driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 spi_geni_driver_init+0x1c/0x24 do_one_initcall+0x1a4/0x3e8 do_initcall_level+0xb4/0xcc do_basic_setup+0x30/0x48 kernel_init_freeable+0x124/0x1a8 kernel_init+0x14/0x100 ret_from_fork+0x10/0x18 -> #0 (&irq_desc_lock_class){-.-.}: __lock_acquire+0xeb4/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pctrl->lock); lock(&irq_desc_lock_class); lock(&pctrl->lock); lock(&irq_desc_lock_class); *** DEADLOCK *** 7 locks held by cat/3083: #0: ffffff81f06d1420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4 #1: ffffff81c8935680 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc #3: ffffffe89a641d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348 #4: ffffff81f190e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c #5: ffffff81f183d8c0 (lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 #6: ffffff81f4880c18 (&pctrl->lock){-.-.}, at: msm_gpio_irq_set_wake+0x48/0x7c stack backtrace: CPU: 4 PID: 3083 Comm: cat Tainted: G W 5.4.11 #2 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xc8/0x124 print_circular_bug+0x2ac/0x2c4 check_noncircular+0x1a0/0x1a8 __lock_acquire+0xeb4/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc Fixes: 6aced33 ("pinctrl: msm: drop wake_irqs bitmap") Cc: Douglas Anderson <[email protected]> Cc: Brian Masney <[email protected]> Cc: Lina Iyer <[email protected]> Cc: Maulik Shah <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2d5a2f9 upstream. I see the following lockdep splat in the qcom pinctrl driver when attempting to suspend the device. WARNING: possible recursive locking detected 5.4.11 #3 Tainted: G W -------------------------------------------- cat/3074 is trying to acquire lock: ffffff81f49804c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 but task is already holding lock: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by cat/3074: #0: ffffff81f01d9420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4 #1: ffffff81bd7d2080 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc #3: ffffffe411a41d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348 #4: ffffff81f1c5e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c #5: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 stack backtrace: CPU: 5 PID: 3074 Comm: cat Tainted: G W 5.4.11 #3 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xc8/0x124 __lock_acquire+0x460/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 qpnpint_irq_set_wake+0x28/0x34 set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 pm8941_pwrkey_suspend+0x34/0x44 platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc Set a lockdep class when we map the irq so that irq_set_wake() doesn't warn about a lockdep bug that doesn't exist. Fixes: 12a9eea ("spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips") Cc: Douglas Anderson <[email protected]> Cc: Brian Masney <[email protected]> Cc: Lina Iyer <[email protected]> Cc: Maulik Shah <[email protected]> Cc: Bjorn Andersson <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 35df429 upstream. EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4] write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0) Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write. Signed-off-by: Qian Cai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 6cf539a ] This fixes a data-race where `atomic_t dynticks` is copied by value. The copy is performed non-atomically, resulting in a data-race if `dynticks` is updated concurrently. This data-race was found with KCSAN: ================================================================== BUG: KCSAN: data-race in dyntick_save_progress_counter / rcu_irq_enter write to 0xffff989dbdbe98e0 of 4 bytes by task 10 on cpu 3: atomic_add_return include/asm-generic/atomic-instrumented.h:78 [inline] rcu_dynticks_snap kernel/rcu/tree.c:310 [inline] dyntick_save_progress_counter+0x43/0x1b0 kernel/rcu/tree.c:984 force_qs_rnp+0x183/0x200 kernel/rcu/tree.c:2286 rcu_gp_fqs kernel/rcu/tree.c:1601 [inline] rcu_gp_fqs_loop+0x71/0x880 kernel/rcu/tree.c:1653 rcu_gp_kthread+0x22c/0x3b0 kernel/rcu/tree.c:1799 kthread+0x1b5/0x200 kernel/kthread.c:255 <snip> read to 0xffff989dbdbe98e0 of 4 bytes by task 154 on cpu 7: rcu_nmi_enter_common kernel/rcu/tree.c:828 [inline] rcu_irq_enter+0xda/0x240 kernel/rcu/tree.c:870 irq_enter+0x5/0x50 kernel/softirq.c:347 <snip> Reported by Kernel Concurrency Sanitizer on: CPU: 7 PID: 154 Comm: kworker/7:1H Not tainted 5.3.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn ================================================================== Signed-off-by: Marco Elver <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Josh Triplett <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Joel Fernandes <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Joel Fernandes (Google) <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c34f6dc ] I see the following lockdep splat in the qcom pinctrl driver when attempting to suspend the device. ============================================ WARNING: possible recursive locking detected 5.4.2 #2 Tainted: G S -------------------------------------------- cat/6536 is trying to acquire lock: ffffff814787ccc0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 but task is already holding lock: ffffff81436740c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by cat/6536: #0: ffffff8140e0c420 (sb_writers#7){.+.+}, at: vfs_write+0xc8/0x19c #1: ffffff8121eec480 (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x1f4 #2: ffffff8147cad668 (kn->count#263){.+.+}, at: kernfs_fop_write+0x130/0x1f4 #3: ffffffd011446000 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x354 #4: ffffff814302b970 (&dev->mutex){....}, at: __device_suspend+0x16c/0x420 #5: ffffff81436740c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 #6: ffffff81479b8c10 (&pctrl->lock){....}, at: msm_gpio_irq_set_wake+0x48/0x7c stack backtrace: CPU: 4 PID: 6536 Comm: cat Tainted: G S 5.4.2 #2 Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xdc/0x144 __lock_acquire+0x52c/0x2268 lock_acquire+0x1dc/0x220 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x314/0x420 dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x628 pm_suspend+0x214/0x354 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x158/0x1f4 __vfs_write+0x54/0x18c vfs_write+0xdc/0x19c ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10 This is because the msm_gpio_irq_set_wake() function calls irq_set_irq_wake() as a backup in case the irq comes in during the path to idle. Given that we're calling irqchip functions from within an irqchip we need to set the lockdep class to be different for this child controller vs. the default one that the parent irqchip gets. This used to be done before this driver was converted to hierarchical irq domains in commit e35a6ae ("pinctrl/msm: Setup GPIO chip in hierarchy") via the gpiochip_irq_map() function. With hierarchical irq domains this function has been replaced by gpiochip_hierarchy_irq_domain_alloc(). Therefore, set the lockdep class like was done previously in the irq domain path so we can avoid this lockdep warning. Fixes: fdd61a0 ("gpio: Add support for hierarchical IRQ domains") Cc: Thierry Reding <[email protected]> Cc: Brian Masney <[email protected]> Cc: Lina Iyer <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Maulik Shah <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 35df429 upstream. EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4] write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0) Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write. Signed-off-by: Qian Cai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c34f6dc ] I see the following lockdep splat in the qcom pinctrl driver when attempting to suspend the device. ============================================ WARNING: possible recursive locking detected 5.4.2 #2 Tainted: G S -------------------------------------------- cat/6536 is trying to acquire lock: ffffff814787ccc0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 but task is already holding lock: ffffff81436740c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by cat/6536: #0: ffffff8140e0c420 (sb_writers#7){.+.+}, at: vfs_write+0xc8/0x19c #1: ffffff8121eec480 (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x1f4 #2: ffffff8147cad668 (kn->count#263){.+.+}, at: kernfs_fop_write+0x130/0x1f4 #3: ffffffd011446000 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x354 #4: ffffff814302b970 (&dev->mutex){....}, at: __device_suspend+0x16c/0x420 #5: ffffff81436740c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 #6: ffffff81479b8c10 (&pctrl->lock){....}, at: msm_gpio_irq_set_wake+0x48/0x7c stack backtrace: CPU: 4 PID: 6536 Comm: cat Tainted: G S 5.4.2 #2 Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xdc/0x144 __lock_acquire+0x52c/0x2268 lock_acquire+0x1dc/0x220 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x314/0x420 dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x628 pm_suspend+0x214/0x354 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x158/0x1f4 __vfs_write+0x54/0x18c vfs_write+0xdc/0x19c ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10 This is because the msm_gpio_irq_set_wake() function calls irq_set_irq_wake() as a backup in case the irq comes in during the path to idle. Given that we're calling irqchip functions from within an irqchip we need to set the lockdep class to be different for this child controller vs. the default one that the parent irqchip gets. This used to be done before this driver was converted to hierarchical irq domains in commit e35a6ae ("pinctrl/msm: Setup GPIO chip in hierarchy") via the gpiochip_irq_map() function. With hierarchical irq domains this function has been replaced by gpiochip_hierarchy_irq_domain_alloc(). Therefore, set the lockdep class like was done previously in the irq domain path so we can avoid this lockdep warning. Fixes: fdd61a0 ("gpio: Add support for hierarchical IRQ domains") Cc: Thierry Reding <[email protected]> Cc: Brian Masney <[email protected]> Cc: Lina Iyer <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Maulik Shah <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 35df429 upstream. EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4] write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0) Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write. Signed-off-by: Qian Cai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a866759 ] This reverts commit 64e62bd. This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 #47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by: Lyude Paul <[email protected]> Fixes: 64e62bd ("drm/dp_mst: Remove VCPI while disabling topology mgr") Cc: Sean Paul <[email protected]> Cc: Wayne Lin <[email protected]> Reviewed-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1bc7896 ] When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: # --- a/tools/trace.py # +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a866759 ] This reverts commit 64e62bd. This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 #47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by: Lyude Paul <[email protected]> Fixes: 64e62bd ("drm/dp_mst: Remove VCPI while disabling topology mgr") Cc: Sean Paul <[email protected]> Cc: Wayne Lin <[email protected]> Reviewed-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1bc7896 ] When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: # --- a/tools/trace.py # +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 8a39e8c ] When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1 ("perf test: Improve bp_signal") Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 8a39e8c ] When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1 ("perf test: Improve bp_signal") Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b12eea5 ] The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 8a39e8c ] When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1 ("perf test: Improve bp_signal") Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 22fe5a2 ] The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a783 ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <[email protected]> Reviewed-by: John Garry <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b12eea5 ] The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7df003c ] We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: â€¦ error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 â€¦ Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by: LinFeng <[email protected]> Signed-off-by: Zhuang Yanying <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 266150c ] Realloc of size zero is a free not an error, avoid this causing a double free. Caught by clang's address sanitizer: ==2634==ERROR: AddressSanitizer: attempting double-free on 0x6020000015f0 in thread T0: #0 0x5649659297fd in free llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:123:3 #1 0x5649659e9251 in __zfree tools/lib/zalloc.c:13:2 #2 0x564965c0f92c in mem2node__exit tools/perf/util/mem2node.c:114:2 #3 0x564965a08b4c in perf_c2c__report tools/perf/builtin-c2c.c:2867:2 #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #8 0x564965942e41 in main tools/perf/perf.c:538:3 0x6020000015f0 is located 0 bytes inside of 1-byte region [0x6020000015f0,0x6020000015f1) freed by thread T0 here: #0 0x564965929da3 in realloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3 #1 0x564965c0f55e in mem2node__init tools/perf/util/mem2node.c:97:16 #2 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8 #3 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #4 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #5 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #6 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #7 0x564965942e41 in main tools/perf/perf.c:538:3 previously allocated by thread T0 here: #0 0x564965929c42 in calloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3 #1 0x5649659e9220 in zalloc tools/lib/zalloc.c:8:9 #2 0x564965c0f32d in mem2node__init tools/perf/util/mem2node.c:61:12 #3 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8 #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #8 0x564965942e41 in main tools/perf/perf.c:538:3 v2: add a WARN_ON_ONCE when the free condition arises. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7df003c ] We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: â€¦ error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 â€¦ Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by: LinFeng <[email protected]> Signed-off-by: Zhuang Yanying <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 266150c ] Realloc of size zero is a free not an error, avoid this causing a double free. Caught by clang's address sanitizer: ==2634==ERROR: AddressSanitizer: attempting double-free on 0x6020000015f0 in thread T0: #0 0x5649659297fd in free llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:123:3 #1 0x5649659e9251 in __zfree tools/lib/zalloc.c:13:2 #2 0x564965c0f92c in mem2node__exit tools/perf/util/mem2node.c:114:2 #3 0x564965a08b4c in perf_c2c__report tools/perf/builtin-c2c.c:2867:2 #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #8 0x564965942e41 in main tools/perf/perf.c:538:3 0x6020000015f0 is located 0 bytes inside of 1-byte region [0x6020000015f0,0x6020000015f1) freed by thread T0 here: #0 0x564965929da3 in realloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3 #1 0x564965c0f55e in mem2node__init tools/perf/util/mem2node.c:97:16 #2 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8 #3 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #4 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #5 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #6 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #7 0x564965942e41 in main tools/perf/perf.c:538:3 previously allocated by thread T0 here: #0 0x564965929c42 in calloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3 #1 0x5649659e9220 in zalloc tools/lib/zalloc.c:8:9 #2 0x564965c0f32d in mem2node__init tools/perf/util/mem2node.c:61:12 #3 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8 #4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10 #5 0x564965944348 in run_builtin tools/perf/perf.c:312:11 #6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8 #7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2 #8 0x564965942e41 in main tools/perf/perf.c:538:3 v2: add a WARN_ON_ONCE when the free condition arises. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e63d6fb ] Enabling CONFIG_TAU_INT causes random crashes: Unrecoverable exception 1700 at c0009414 (msr=1000) Oops: Unrecoverable exception, sig: 6 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5 NIP: c0009414 LR: c0009414 CTR: c00116fc REGS: c0799eb8 TRAP: 1700 Not tainted (5.7.0-pmac-00043-gd5f545e1a8593) MSR: 00001000 <ME> CR: 22000228 XER: 00000100 GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032 GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04 GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c LR [c0009414] arch_cpu_idle+0x24/0x6c Call Trace: [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6 ---[ end trace 3a0c9b5cb216db6b ]--- Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c7dacf5 ] If the txdone is done by polling, it is possible for msg_submit() to start the timer while txdone_hrtimer() callback is running. If the timer needs recheduling, it could already be enqueued by the time hrtimer_forward_now() is called, leading hrtimer to loudly complain. WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110 CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5 Hardware name: Libre Computer AML-S805X-AC (DT) Workqueue: events_freezable_power_ thermal_zone_device_check pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) pc : hrtimer_forward+0xc4/0x110 lr : txdone_hrtimer+0xf8/0x118 [...] This can be fixed by not starting the timer from the callback path. Which requires the timer reloading as long as any message is queued on the channel, and not just when current tx is not done yet. Fixes: 0cc6794 ("mailbox: switch to hrtimer for tx_complete polling") Reported-by: Da Xue <[email protected]> Reviewed-by: Sudeep Holla <[email protected]> Tested-by: Sudeep Holla <[email protected]> Acked-by: Jerome Brunet <[email protected]> Tested-by: Jerome Brunet <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e63d6fb ] Enabling CONFIG_TAU_INT causes random crashes: Unrecoverable exception 1700 at c0009414 (msr=1000) Oops: Unrecoverable exception, sig: 6 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5 NIP: c0009414 LR: c0009414 CTR: c00116fc REGS: c0799eb8 TRAP: 1700 Not tainted (5.7.0-pmac-00043-gd5f545e1a8593) MSR: 00001000 <ME> CR: 22000228 XER: 00000100 GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032 GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04 GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c LR [c0009414] arch_cpu_idle+0x24/0x6c Call Trace: [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6 ---[ end trace 3a0c9b5cb216db6b ]--- Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c7dacf5 ] If the txdone is done by polling, it is possible for msg_submit() to start the timer while txdone_hrtimer() callback is running. If the timer needs recheduling, it could already be enqueued by the time hrtimer_forward_now() is called, leading hrtimer to loudly complain. WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110 CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5 Hardware name: Libre Computer AML-S805X-AC (DT) Workqueue: events_freezable_power_ thermal_zone_device_check pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) pc : hrtimer_forward+0xc4/0x110 lr : txdone_hrtimer+0xf8/0x118 [...] This can be fixed by not starting the timer from the callback path. Which requires the timer reloading as long as any message is queued on the channel, and not just when current tx is not done yet. Fixes: 0cc6794 ("mailbox: switch to hrtimer for tx_complete polling") Reported-by: Da Xue <[email protected]> Reviewed-by: Sudeep Holla <[email protected]> Tested-by: Sudeep Holla <[email protected]> Acked-by: Jerome Brunet <[email protected]> Tested-by: Jerome Brunet <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 6259301 upstream. TCP server info field server->total_read is modified in parallel by demultiplex thread and decrypt offload worker thread. server->total_read is used in calculation to discard the remaining data of PDU which is not read into memory. Because of parallel modification, server->total_read can get corrupted and can result in discarding the valid data of next PDU. Signed-off-by: Rohith Surabattula <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> CC: Stable <[email protected]> #5.4+ Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e63d6fb ] Enabling CONFIG_TAU_INT causes random crashes: Unrecoverable exception 1700 at c0009414 (msr=1000) Oops: Unrecoverable exception, sig: 6 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5 NIP: c0009414 LR: c0009414 CTR: c00116fc REGS: c0799eb8 TRAP: 1700 Not tainted (5.7.0-pmac-00043-gd5f545e1a8593) MSR: 00001000 <ME> CR: 22000228 XER: 00000100 GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032 GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04 GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c LR [c0009414] arch_cpu_idle+0x24/0x6c Call Trace: [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6 ---[ end trace 3a0c9b5cb216db6b ]--- Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c7dacf5 ] If the txdone is done by polling, it is possible for msg_submit() to start the timer while txdone_hrtimer() callback is running. If the timer needs recheduling, it could already be enqueued by the time hrtimer_forward_now() is called, leading hrtimer to loudly complain. WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110 CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5 Hardware name: Libre Computer AML-S805X-AC (DT) Workqueue: events_freezable_power_ thermal_zone_device_check pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) pc : hrtimer_forward+0xc4/0x110 lr : txdone_hrtimer+0xf8/0x118 [...] This can be fixed by not starting the timer from the callback path. Which requires the timer reloading as long as any message is queued on the channel, and not just when current tx is not done yet. Fixes: 0cc6794 ("mailbox: switch to hrtimer for tx_complete polling") Reported-by: Da Xue <[email protected]> Reviewed-by: Sudeep Holla <[email protected]> Tested-by: Sudeep Holla <[email protected]> Acked-by: Jerome Brunet <[email protected]> Tested-by: Jerome Brunet <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 6259301 upstream. TCP server info field server->total_read is modified in parallel by demultiplex thread and decrypt offload worker thread. server->total_read is used in calculation to discard the remaining data of PDU which is not read into memory. Because of parallel modification, server->total_read can get corrupted and can result in discarding the valid data of next PDU. Signed-off-by: Rohith Surabattula <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> CC: Stable <[email protected]> #5.4+ Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e63d6fb ] Enabling CONFIG_TAU_INT causes random crashes: Unrecoverable exception 1700 at c0009414 (msr=1000) Oops: Unrecoverable exception, sig: 6 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5 NIP: c0009414 LR: c0009414 CTR: c00116fc REGS: c0799eb8 TRAP: 1700 Not tainted (5.7.0-pmac-00043-gd5f545e1a8593) MSR: 00001000 <ME> CR: 22000228 XER: 00000100 GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032 GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04 GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c LR [c0009414] arch_cpu_idle+0x24/0x6c Call Trace: [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6 ---[ end trace 3a0c9b5cb216db6b ]--- Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <[email protected]>

…vents [ Upstream commit bef69bd ] It was reported that 'perf stat' crashed when using with armv8_pmu (CPU) events with the task mode. As 'perf stat' uses an empty cpu map for task mode but armv8_pmu has its own cpu mask, it has confused which map it should use when accessing file descriptors and this causes segfaults: (gdb) bt #0 0x0000000000603fc8 in perf_evsel__close_fd_cpu (evsel=<optimized out>, cpu=<optimized out>) at evsel.c:122 #1 perf_evsel__close_cpu (evsel=evsel@entry=0x716e950, cpu=7) at evsel.c:156 #2 0x00000000004d4718 in evlist__close (evlist=0x70a7cb0) at util/evlist.c:1242 #3 0x0000000000453404 in __run_perf_stat (argc=3, argc@entry=1, argv=0x30, argv@entry=0xfffffaea2f90, run_idx=119, run_idx@entry=1701998435) at builtin-stat.c:929 #4 0x0000000000455058 in run_perf_stat (run_idx=1701998435, argv=0xfffffaea2f90, argc=1) at builtin-stat.c:947 #5 cmd_stat (argc=1, argv=0xfffffaea2f90) at builtin-stat.c:2357 #6 0x00000000004bb888 in run_builtin (p=p@entry=0x9764b8 <commands+288>, argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:312 #7 0x00000000004bbb54 in handle_internal_command (argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:364 #8 0x0000000000435378 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:408 #9 main (argc=4, argv=0xfffffaea2f90) at perf.c:538 To fix this, I simply used the given cpu map unless the evsel actually is not a system-wide event (like uncore events). Fixes: 7736627 ("perf stat: Use affinity for closing file descriptors") Reported-by: Wei Li <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Barry Song <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c7dacf5 ] If the txdone is done by polling, it is possible for msg_submit() to start the timer while txdone_hrtimer() callback is running. If the timer needs recheduling, it could already be enqueued by the time hrtimer_forward_now() is called, leading hrtimer to loudly complain. WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110 CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5 Hardware name: Libre Computer AML-S805X-AC (DT) Workqueue: events_freezable_power_ thermal_zone_device_check pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) pc : hrtimer_forward+0xc4/0x110 lr : txdone_hrtimer+0xf8/0x118 [...] This can be fixed by not starting the timer from the callback path. Which requires the timer reloading as long as any message is queued on the channel, and not just when current tx is not done yet. Fixes: 0cc6794 ("mailbox: switch to hrtimer for tx_complete polling") Reported-by: Da Xue <[email protected]> Reviewed-by: Sudeep Holla <[email protected]> Tested-by: Sudeep Holla <[email protected]> Acked-by: Jerome Brunet <[email protected]> Tested-by: Jerome Brunet <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Daniele Rondina added 2 commits January 18, 2020 16:27

sabayon-amd64.config: Enable BPF Filter

309d596

sabayon-amd64.config: Enable CONFIG_NETWORK_PHY_TIMESTAMPING

ad54ddd

geaaru requested a review from mudler January 18, 2020 18:31

geaaru mentioned this pull request Jan 18, 2020

Enabling CONFIG_NETWORK_PHY_TIMESTAMPING #4

Closed

mudler approved these changes Jan 28, 2020

View reviewed changes

mudler merged commit 25a5efe into Sabayon:5.4 Jan 28, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Improve sabayon config for BPF and CONFIG_NETWORK_PHY_TIMESTAMPING #5

Improve sabayon config for BPF and CONFIG_NETWORK_PHY_TIMESTAMPING #5

geaaru commented Jan 18, 2020

geaaru commented Jan 25, 2020

mudler left a comment

Improve sabayon config for BPF and CONFIG_NETWORK_PHY_TIMESTAMPING #5

Improve sabayon config for BPF and CONFIG_NETWORK_PHY_TIMESTAMPING #5

Conversation

geaaru commented Jan 18, 2020

geaaru commented Jan 25, 2020

mudler left a comment

Choose a reason for hiding this comment