Moonshots #3

ojeda · 2020-08-28T19:16:06Z

Some ideas discussed in the LPC hackrooms worth exploring for the long-term:

Rust support for some kind of way to annotate other kinds of "unsafety" for functions/contexts/scopes, e.g. unsafe(interrupt), unsafe(signal).

The text was updated successfully, but these errors were encountered:

Move all allocations outside of the regulator_lock()ed section. ====================================================== WARNING: possible circular locking dependency detected 5.7.13+ #535 Not tainted ------------------------------------------------------ f2fs_discard-179:7/702 is trying to acquire lock: c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0 but task is already holding lock: cb95b080 (&dcc->cmd_lock){+.+.}-{3:3}, at: __issue_discard_cmd+0xec/0x5f8 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: [...] -> #3 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire.part.11+0x40/0x50 fs_reclaim_acquire+0x24/0x28 __kmalloc_track_caller+0x54/0x218 kstrdup+0x40/0x5c create_regulator+0xf4/0x368 regulator_resolve_supply+0x1a0/0x200 regulator_register+0x9c8/0x163c [...] other info that might help us debug this: Chain exists of: regulator_list_mutex --> &sit_i->sentry_lock --> &dcc->cmd_lock [...] Fixes: f8702f9 ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by: Michał Mirosław <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/6eebc99b2474f4ffaa0405b15178ece0e7e4f608.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <[email protected]>

This reverts commit 61eee4a ("ALSA: hda: Add support for Loongson 7A1000 controller") to fix the following error on the Loongson LS7A platform: rcu: INFO: rcu_preempt self-detected stall on CPU <SNIP> NMI backtrace for cpu 0 CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3 Hardware name: , BIOS Workqueue: events azx_probe_work [snd_hda_intel] <SNIP> Call Trace: [<ffffffff80211a64>] show_stack+0x9c/0x130 [<ffffffff8065a740>] dump_stack+0xb0/0xf0 [<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140 [<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200 [<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190 [<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8 [<ffffffff802b91d4>] update_process_times+0x2c/0xb8 [<ffffffff802cad80>] tick_sched_timer+0x40/0xb8 [<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0 [<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8 [<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0 [<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198 [<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90 [<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8 [<ffffffff80296124>] generic_handle_irq+0x44/0x60 [<ffffffff80b3cfd0>] do_IRQ+0x18/0x28 [<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100 [<ffffffff80209a20>] handle_int+0x140/0x14c [<ffffffff802402e8>] irq_exit+0xf8/0x100 Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA controller, it needs some workarounds which are not merged into the upstream kernel at this time, so it should revert this patch now. Fixes: 61eee4a ("ALSA: hda: Add support for Loongson 7A1000 controller") Cc: <[email protected]> # 5.9-rc1+ Signed-off-by: Tiezhu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>

I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 #18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Sumanth Korikkar <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

syzbot reported twice a lockdep issue in fib6_del() [1] which I think is caused by net->ipv6.fib6_null_entry having a NULL fib6_table pointer. fib6_del() already checks for fib6_null_entry special case, we only need to return earlier. Bug seems to occur very rarely, I have thus chosen a 'bug origin' that makes backports not too complex. [1] WARNING: suspicious RCU usage 5.9.0-rc4-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.5/8095: #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline] #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline] #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245 stack backtrace: CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline] fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] dev_close_many+0x30b/0x650 net/core/dev.c:1634 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261 rollback_registered net/core/dev.c:9329 [inline] unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410 unregister_netdevice include/linux/netdevice.h:2774 [inline] ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 421842e ("net/ipv6: Add fib6_null_entry") Signed-off-by: Eric Dumazet <[email protected]> Cc: David Ahern <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>

When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1 ("perf test: Improve bp_signal") Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a783 ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <[email protected]> Reviewed-by: John Garry <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The metricgroup__add_metric() can find multiple match for a metric group and it's possible to fail. Also it can fail in the middle like in resolve_metric() even for single metric. In those cases, the intermediate list and ids will be leaked like: Direct leak of 3 byte(s) in 1 object(s) allocated from: #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683 #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906 #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940 #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993 #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045 #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087 #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164 #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196 #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318 #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356 #11 0x55f7e70be09b in run_test tests/builtin-test.c:410 #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. There's a report from syzbot probably hitting one of the cases where the bd_mutex and device_list_mutex are taken in the wrong order, however it's not with device replace, like this patch fixes. As there's no reproducer available so far, we can't verify the fix. https://lore.kernel.org/lkml/[email protected]/ dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419 WARNING: possible circular locking dependency detected 5.9.0-rc5-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.0/6878 is trying to acquire lock: ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804 but task is already holding lock: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline] find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #3 (sb_internal#2){.+.+}-{0:0}: percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x234/0x470 fs/super.c:1672 sb_start_intwrite include/linux/fs.h:1690 [inline] start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline] find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __flush_work+0x60e/0xac0 kernel/workqueue.c:3041 wb_shutdown+0x180/0x220 mm/backing-dev.c:355 bdi_unregister+0x174/0x590 mm/backing-dev.c:872 del_gendisk+0x820/0xa10 block/genhd.c:933 loop_remove drivers/block/loop.c:2192 [inline] loop_control_ioctl drivers/block/loop.c:2291 [inline] loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 lo_open+0x19/0xd0 drivers/block/loop.c:1893 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507 blkdev_get fs/block_dev.c:1639 [inline] blkdev_open+0x227/0x300 fs/block_dev.c:1753 do_dentry_open+0x4b9/0x11b0 fs/open.c:817 do_open fs/namei.c:3251 [inline] path_openat+0x1b9a/0x2730 fs/namei.c:3368 do_filp_open+0x17e/0x3c0 fs/namei.c:3395 do_sys_openat2+0x16d/0x420 fs/open.c:1168 do_sys_open fs/open.c:1184 [inline] __do_sys_open fs/open.c:1192 [inline] __se_sys_open fs/open.c:1188 [inline] __x64_sys_open+0x119/0x1c0 fs/open.c:1188 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&bdev->bd_mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(sb_internal#2); lock(&fs_devs->device_list_mutex); lock(&bdev->bd_mutex); *** DEADLOCK *** 3 locks held by syz-executor.0/6878: #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365 #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178 #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 stack backtrace: CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x460027 RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027 RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0 RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460 R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460 Signed-off-by: Josef Bacik <[email protected]> [ add syzbot reference ] Signed-off-by: David Sterba <[email protected]>

…kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 5.9, take #3 - Fix synchronization of VTTBR update on TLB invalidation for nVHE systems

…nux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "We have some fixes for Tablet Mode reporting in particular, that users are complaining a lot about. Summary: - Attempt #3 of enabling Tablet Mode reporting w/o regressions - Improve battery recognition code in ASUS WMI driver - Fix Kconfig dependency warning for Fujitsu and LG laptop drivers - Add fixes in Thinkpad ACPI driver for _BCL method and NVRAM polling - Fix power supply extended topology in Mellanox driver - Fix memory leak in OLPC EC driver - Avoid static struct device in Intel PMC core driver - Add support for the touchscreen found in MPMAN Converter9 2-in-1 - Update MAINTAINERS to reflect the real state of affairs" * tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360" platform/x86: intel_pmc_core: do not create a static struct device platform/x86: mlx-platform: Fix extended topology configuration for power supply units platform/x86: pcengines-apuv2: Fix typo on define of AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOP platform/x86: fix kconfig dependency warning for LG_LAPTOP platform/x86: thinkpad_acpi: initialize tp_nvram_state variable platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360 platform/x86: asus-wmi: Add BATC battery name to the list of supported platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA" platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1 Documentation: laptops: thinkpad-acpi: fix underline length build warning Platform: OLPC: Fix memleak in olpc_ec_probe

@offset

On setxattr() syscall path due to an apprent typo the size of a dynamically allocated memory chunk for storing struct smb2_file_full_ea_info object is computed incorrectly, to be more precise the first addend is the size of a pointer instead of the wanted object size. Coincidentally it makes no difference on 64-bit platforms, however on 32-bit targets the following memcpy() writes 4 bytes of data outside of the dynamically allocated memory. ============================================================================= BUG kmalloc-16 (Not tainted): Redzone overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201 INFO: Object 0x6f171df3 @offset=352 fp=0x00000000 Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi Redzone 79e69a6f: 73 68 32 0a sh2. Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: dump_stack+0x54/0x6e print_trailer+0x12c/0x134 check_bytes_and_report.cold+0x3e/0x69 check_object+0x18c/0x250 free_debug_processing+0xfe/0x230 __slab_free+0x1c0/0x300 kfree+0x1d3/0x220 smb2_set_ea+0x27d/0x540 cifs_xattr_set+0x57f/0x620 __vfs_setxattr+0x4e/0x60 __vfs_setxattr_noperm+0x4e/0x100 __vfs_setxattr_locked+0xae/0xd0 vfs_setxattr+0x4e/0xe0 setxattr+0x12c/0x1a0 path_setxattr+0xa4/0xc0 __ia32_sys_lsetxattr+0x1d/0x20 __do_fast_syscall_32+0x40/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 Fixes: 5517554 ("cifs: Add support for writing attributes on SMB2+") Signed-off-by: Vladimir Zapolskiy <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Abaci Fuzz reported a shift-out-of-bounds BUG in io_uring_create(): [ 59.598207] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 59.599665] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 59.601230] CPU: 0 PID: 963 Comm: a.out Not tainted 5.10.0-rc4+ #3 [ 59.602502] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 59.603673] Call Trace: [ 59.604286] dump_stack+0x107/0x163 [ 59.605237] ubsan_epilogue+0xb/0x5a [ 59.606094] __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e [ 59.607335] ? lock_downgrade+0x6c0/0x6c0 [ 59.608182] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 59.609166] io_uring_create.cold+0x99/0x149 [ 59.610114] io_uring_setup+0xd6/0x140 [ 59.610975] ? io_uring_create+0x2510/0x2510 [ 59.611945] ? lockdep_hardirqs_on_prepare+0x286/0x400 [ 59.613007] ? syscall_enter_from_user_mode+0x27/0x80 [ 59.614038] ? trace_hardirqs_on+0x5b/0x180 [ 59.615056] do_syscall_64+0x2d/0x40 [ 59.615940] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 59.617007] RIP: 0033:0x7f2bb8a0b239 This is caused by roundup_pow_of_two() if the input entries larger enough, e.g. 2^32-1. For sq_entries, it will check first and we allow at most IORING_MAX_ENTRIES, so it is okay. But for cq_entries, we do round up first, that may overflow and truncate it to 0, which is not the expected behavior. So check the cq size first and then do round up. Fixes: 88ec321 ("io_uring: round-up cq size before comparing with rounded sq size") Reported-by: Abaci Fuzz <[email protected]> Signed-off-by: Joseph Qi <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: Jens Axboe <[email protected]>

…nx/linux-xlnx into arm/fixes arm64: soc: ZynqMP SoC fixes for v5.10-rc6 - Fix SD dll reset issue by using proper macro - Fix PM feature checking for Xilinx Versal SoC * tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xilinx/linux-xlnx: (337 commits) firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue Linux 5.10-rc4 kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use afs: Fix afs_write_end() when called with copied == 0 [ver #3] ocfs2: initialize ip_next_orphan panic: don't dump stack twice on warn hugetlbfs: fix anon huge page migration race mm: memcontrol: fix missing wakeup polling thread kernel/watchdog: fix watchdog_allowed_mask not used warning reboot: fix overflow parsing reboot cpu number Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint" compiler.h: fix barrier_data() on clang mm/gup: use unpin_user_pages() in __gup_longterm_locked() mm/slub: fix panic in slab_alloc_node() mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate mm/compaction: count pages and stop correctly during page isolation drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>

When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE will WARN() at boot time that interrupts are enabled when we call context_tracking_user_enter(), despite the DAIF flags indicating that IRQs are masked. The problem is that we're not tracking IRQ flag changes accurately, and so lockdep believes interrupts are enabled when they are not (and vice-versa). We can shuffle things so to make this more accurate. For kernel->user transitions there are a number of constraints we need to consider: 1) When we call __context_tracking_user_enter() HW IRQs must be disabled and lockdep must be up-to-date with this. 2) Userspace should be treated as having IRQs enabled from the PoV of both lockdep and tracing. 3) As context_tracking_user_enter() stops RCU from watching, we cannot use RCU after calling it. 4) IRQ flag tracing and lockdep have state that must be manipulated before RCU is disabled. ... with similar constraints applying for user->kernel transitions, with the ordering reversed. The generic entry code has enter_from_user_mode() and exit_to_user_mode() helpers to handle this. We can't use those directly, so we add arm64 copies for now (without the instrumentation markers which aren't used on arm64). These replace the existing user_exit() and user_exit_irqoff() calls spread throughout handlers, and the exception unmasking is left as-is. Note that: * The accounting for debug exceptions from userspace now happens in el0_dbg() and ret_to_user(), so this is removed from debug_exception_enter() and debug_exception_exit(). As user_exit_irqoff() wakes RCU, the userspace-specific check is removed. * The accounting for syscalls now happens in el0_svc(), el0_svc_compat(), and ret_to_user(), so this is removed from el0_svc_common(). This does not adversely affect the workaround for erratum 1463225, as this does not depend on any of the state tracking. * In ret_to_user() we mask interrupts with local_daif_mask(), and so we need to inform lockdep and tracing. Here a trace_hardirqs_off() is sufficient and safe as we have not yet exited kernel context and RCU is usable. * As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only needs to check for the latter. * EL0 SError handling will be dealt with in a subsequent patch, as this needs to be treated as an NMI. Prior to this patch, booting an appropriately-configured kernel would result in spats as below: | DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled()) | WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0 | Modules linked in: | CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3 | Hardware name: linux,dummy-virt (DT) | pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--) | pc : check_flags.part.54+0x1dc/0x1f0 | lr : check_flags.part.54+0x1dc/0x1f0 | sp : ffff80001003bd80 | x29: ffff80001003bd80 x28: ffff66ce801e0000 | x27: 00000000ffffffff x26: 00000000000003c0 | x25: 0000000000000000 x24: ffffc31842527258 | x23: ffffc31842491368 x22: ffffc3184282d000 | x21: 0000000000000000 x20: 0000000000000001 | x19: ffffc318432ce000 x18: 0080000000000000 | x17: 0000000000000000 x16: ffffc31840f18a78 | x15: 0000000000000001 x14: ffffc3184285c810 | x13: 0000000000000001 x12: 0000000000000000 | x11: ffffc318415857a0 x10: ffffc318406614c0 | x9 : ffffc318415857a0 x8 : ffffc31841f1d000 | x7 : 647261685f706564 x6 : ffffc3183ff7c66c | x5 : ffff66ce801e0000 x4 : 0000000000000000 | x3 : ffffc3183fe00000 x2 : ffffc31841500000 | x1 : e956dc24146b3500 x0 : 0000000000000000 | Call trace: | check_flags.part.54+0x1dc/0x1f0 | lock_is_held_type+0x10c/0x188 | rcu_read_lock_sched_held+0x70/0x98 | __context_tracking_enter+0x310/0x350 | context_tracking_enter.part.3+0x5c/0xc8 | context_tracking_user_enter+0x6c/0x80 | finish_ret_to_user+0x2c/0x13cr Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>

Prarit reported that depending on the affinity setting the ' irq $N: Affinity broken due to vector space exhaustion.' message is showing up in dmesg, but the vector space on the CPUs in the affinity mask is definitely not exhausted. Shung-Hsi provided traces and analysis which pinpoints the problem: The ordering of trying to assign an interrupt vector in assign_irq_vector_any_locked() is simply wrong if the interrupt data has a valid node assigned. It does: 1) Try the intersection of affinity mask and node mask 2) Try the node mask 3) Try the full affinity mask 4) Try the full online mask Obviously #2 and #3 are in the wrong order as the requested affinity mask has to take precedence. In the observed cases #1 failed because the affinity mask did not contain CPUs from node 0. That made it allocate a vector from node 0, thereby breaking affinity and emitting the misleading message. Revert the order of #2 and #3 so the full affinity mask without the node intersection is tried before actually affinity is broken. If no node is assigned then only the full affinity mask and if that fails the full online mask is tried. Fixes: d6ffc6a ("x86/vector: Respect affinity mask in irq descriptor") Reported-by: Prarit Bhargava <[email protected]> Reported-by: Shung-Hsi Yu <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Shung-Hsi Yu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]

Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various fixes for mlxsw. Patch #1 fixes a race condition in a selftest. The race and fix are explained in detail in the changelog. Patch #2 re-adds a link mode that was wrongly removed, resulting in a regression in some setups. Patch #3 fixes a race condition in route installation with nexthop objects. Please consider patches #2 and #3 for stable. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Alexander Shishkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 24 24: Number of exit events of a simple workload : --- start --- test child forked, pid 145915 mmap size 528384B ================================================================= ==145915==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63 #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74 #4 0x561cf4d798fb in run_test tests/builtin-test.c:428 #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458 #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679 #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825 #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Number of exit events of a simple workload: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 25 25: Software clock events period values : --- start --- test child forked, pid 149154 mmap size 528384B mmap size 528384B ================================================================= ==149154==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63 #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65 #4 0x56260d26d8fb in run_test tests/builtin-test.c:428 #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458 #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679 #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825 #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Software clock events period values : FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It missed to call perf_thread_map__put() after using the map. $ perf test -v 43 43: Synthesize thread map : --- start --- test child forked, pid 162640 ================================================================= ==162640==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46 #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97 #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428 #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458 #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679 #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825 #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Synthesize thread map: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 4 locks held by kworker/u9:2/5070: #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 #2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915 CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline] hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939 hci_event_func net/bluetooth/hci_event.c:7514 [inline] hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> Reported-by: [email protected] Tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614 Signed-off-by: Luiz Augusto von Dentz <[email protected]>

This fixes the circular locking dependency warning below, by releasing the socket lock before enterning iso_listen_bis, to avoid any potential deadlock with hdev lock. [ 75.307983] ====================================================== [ 75.307984] WARNING: possible circular locking dependency detected [ 75.307985] 6.12.0-rc6+ #22 Not tainted [ 75.307987] ------------------------------------------------------ [ 75.307987] kworker/u81:2/2623 is trying to acquire lock: [ 75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO) at: iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308021] but task is already holding lock: [ 75.308022] ffff8fdd61a10078 (&hdev->lock) at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308053] which lock already depends on the new lock. [ 75.308054] the existing dependency chain (in reverse order) is: [ 75.308055] -> #1 (&hdev->lock){+.+.}-{3:3}: [ 75.308057] __mutex_lock+0xad/0xc50 [ 75.308061] mutex_lock_nested+0x1b/0x30 [ 75.308063] iso_sock_listen+0x143/0x5c0 [bluetooth] [ 75.308085] __sys_listen_socket+0x49/0x60 [ 75.308088] __x64_sys_listen+0x4c/0x90 [ 75.308090] x64_sys_call+0x2517/0x25f0 [ 75.308092] do_syscall_64+0x87/0x150 [ 75.308095] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 75.308098] -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 75.308100] __lock_acquire+0x155e/0x25f0 [ 75.308103] lock_acquire+0xc9/0x300 [ 75.308105] lock_sock_nested+0x32/0x90 [ 75.308107] iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308128] hci_connect_cfm+0x6c/0x190 [bluetooth] [ 75.308155] hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth] [ 75.308180] hci_le_meta_evt+0xe7/0x200 [bluetooth] [ 75.308206] hci_event_packet+0x21f/0x5c0 [bluetooth] [ 75.308230] hci_rx_work+0x3ae/0xb10 [bluetooth] [ 75.308254] process_one_work+0x212/0x740 [ 75.308256] worker_thread+0x1bd/0x3a0 [ 75.308258] kthread+0xe4/0x120 [ 75.308259] ret_from_fork+0x44/0x70 [ 75.308261] ret_from_fork_asm+0x1a/0x30 [ 75.308263] other info that might help us debug this: [ 75.308264] Possible unsafe locking scenario: [ 75.308264] CPU0 CPU1 [ 75.308265] ---- ---- [ 75.308265] lock(&hdev->lock); [ 75.308267] lock(sk_lock- AF_BLUETOOTH-BTPROTO_ISO); [ 75.308268] lock(&hdev->lock); [ 75.308269] lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); [ 75.308270] *** DEADLOCK *** [ 75.308271] 4 locks held by kworker/u81:2/2623: [ 75.308272] #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x443/0x740 [ 75.308276] #1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)), at: process_one_work+0x1ce/0x740 [ 75.308280] #2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3} at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308304] #3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2}, at: hci_connect_cfm+0x29/0x190 [bluetooth] Fixes: 02171da ("Bluetooth: ISO: Add hcon for listening bis sk") Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>

…s_lock For storing a value to a queue attribute, the queue_attr_store function first freezes the queue (->q_usage_counter(io)) and then acquire ->sysfs_lock. This seems not correct as the usual ordering should be to acquire ->sysfs_lock before freezing the queue. This incorrect ordering causes the following lockdep splat which we are able to reproduce always simply by accessing /sys/kernel/debug file using ls command: [ 57.597146] WARNING: possible circular locking dependency detected [ 57.597154] 6.12.0-10553-gb86545e02e8c #20 Tainted: G W [ 57.597162] ------------------------------------------------------ [ 57.597168] ls/4605 is trying to acquire lock: [ 57.597176] c00000003eb56710 (&mm->mmap_lock){++++}-{4:4}, at: __might_fault+0x58/0xc0 [ 57.597200] but task is already holding lock: [ 57.597207] c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4 [ 57.597226] which lock already depends on the new lock. [ 57.597233] the existing dependency chain (in reverse order) is: [ 57.597241] -> #5 (&sb->s_type->i_mutex_key#3){++++}-{4:4}: [ 57.597255] down_write+0x6c/0x18c [ 57.597264] start_creating+0xb4/0x24c [ 57.597274] debugfs_create_dir+0x2c/0x1e8 [ 57.597283] blk_register_queue+0xec/0x294 [ 57.597292] add_disk_fwnode+0x2e4/0x548 [ 57.597302] brd_alloc+0x2c8/0x338 [ 57.597309] brd_init+0x100/0x178 [ 57.597317] do_one_initcall+0x88/0x3e4 [ 57.597326] kernel_init_freeable+0x3cc/0x6e0 [ 57.597334] kernel_init+0x34/0x1cc [ 57.597342] ret_from_kernel_user_thread+0x14/0x1c [ 57.597350] -> #4 (&q->debugfs_mutex){+.+.}-{4:4}: [ 57.597362] __mutex_lock+0xfc/0x12a0 [ 57.597370] blk_register_queue+0xd4/0x294 [ 57.597379] add_disk_fwnode+0x2e4/0x548 [ 57.597388] brd_alloc+0x2c8/0x338 [ 57.597395] brd_init+0x100/0x178 [ 57.597402] do_one_initcall+0x88/0x3e4 [ 57.597410] kernel_init_freeable+0x3cc/0x6e0 [ 57.597418] kernel_init+0x34/0x1cc [ 57.597426] ret_from_kernel_user_thread+0x14/0x1c [ 57.597434] -> #3 (&q->sysfs_lock){+.+.}-{4:4}: [ 57.597446] __mutex_lock+0xfc/0x12a0 [ 57.597454] queue_attr_store+0x9c/0x110 [ 57.597462] sysfs_kf_write+0x70/0xb0 [ 57.597471] kernfs_fop_write_iter+0x1b0/0x2ac [ 57.597480] vfs_write+0x3dc/0x6e8 [ 57.597488] ksys_write+0x84/0x140 [ 57.597495] system_call_exception+0x130/0x360 [ 57.597504] system_call_common+0x160/0x2c4 [ 57.597516] -> #2 (&q->q_usage_counter(io)#21){++++}-{0:0}: [ 57.597530] __submit_bio+0x5ec/0x828 [ 57.597538] submit_bio_noacct_nocheck+0x1e4/0x4f0 [ 57.597547] iomap_readahead+0x2a0/0x448 [ 57.597556] xfs_vm_readahead+0x28/0x3c [ 57.597564] read_pages+0x88/0x41c [ 57.597571] page_cache_ra_unbounded+0x1ac/0x2d8 [ 57.597580] filemap_get_pages+0x188/0x984 [ 57.597588] filemap_read+0x13c/0x4bc [ 57.597596] xfs_file_buffered_read+0x88/0x17c [ 57.597605] xfs_file_read_iter+0xac/0x158 [ 57.597614] vfs_read+0x2d4/0x3b4 [ 57.597622] ksys_read+0x84/0x144 [ 57.597629] system_call_exception+0x130/0x360 [ 57.597637] system_call_common+0x160/0x2c4 [ 57.597647] -> #1 (mapping.invalidate_lock#2){++++}-{4:4}: [ 57.597661] down_read+0x6c/0x220 [ 57.597669] filemap_fault+0x870/0x100c [ 57.597677] xfs_filemap_fault+0xc4/0x18c [ 57.597684] __do_fault+0x64/0x164 [ 57.597693] __handle_mm_fault+0x1274/0x1dac [ 57.597702] handle_mm_fault+0x248/0x484 [ 57.597711] ___do_page_fault+0x428/0xc0c [ 57.597719] hash__do_page_fault+0x30/0x68 [ 57.597727] do_hash_fault+0x90/0x35c [ 57.597736] data_access_common_virt+0x210/0x220 [ 57.597745] _copy_from_user+0xf8/0x19c [ 57.597754] sel_write_load+0x178/0xd54 [ 57.597762] vfs_write+0x108/0x6e8 [ 57.597769] ksys_write+0x84/0x140 [ 57.597777] system_call_exception+0x130/0x360 [ 57.597785] system_call_common+0x160/0x2c4 [ 57.597794] -> #0 (&mm->mmap_lock){++++}-{4:4}: [ 57.597806] __lock_acquire+0x17cc/0x2330 [ 57.597814] lock_acquire+0x138/0x400 [ 57.597822] __might_fault+0x7c/0xc0 [ 57.597830] filldir64+0xe8/0x390 [ 57.597839] dcache_readdir+0x80/0x2d4 [ 57.597846] iterate_dir+0xd8/0x1d4 [ 57.597855] sys_getdents64+0x88/0x2d4 [ 57.597864] system_call_exception+0x130/0x360 [ 57.597872] system_call_common+0x160/0x2c4 [ 57.597881] other info that might help us debug this: [ 57.597888] Chain exists of: &mm->mmap_lock --> &q->debugfs_mutex --> &sb->s_type->i_mutex_key#3 [ 57.597905] Possible unsafe locking scenario: [ 57.597911] CPU0 CPU1 [ 57.597917] ---- ---- [ 57.597922] rlock(&sb->s_type->i_mutex_key#3); [ 57.597932] lock(&q->debugfs_mutex); [ 57.597940] lock(&sb->s_type->i_mutex_key#3); [ 57.597950] rlock(&mm->mmap_lock); [ 57.597958] *** DEADLOCK *** [ 57.597965] 2 locks held by ls/4605: [ 57.597971] #0: c0000000137c12f8 (&f->f_pos_lock){+.+.}-{4:4}, at: fdget_pos+0xcc/0x154 [ 57.597989] #1: c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4 Prevent the above lockdep warning by acquiring ->sysfs_lock before freezing the queue while storing a queue attribute in queue_attr_store function. Later, we also found[1] another function __blk_mq_update_nr_ hw_queues where we first freeze queue and then acquire the ->sysfs_lock. So we've also updated lock ordering in __blk_mq_update_nr_hw_queues function and ensured that in all code paths we follow the correct lock ordering i.e. acquire ->sysfs_lock before freezing the queue. [1] https://lore.kernel.org/all/CAFj5m9Ke8+EHKQBs_Nk6hqd=LGXtk4mUxZUN5==ZcCjnZSBwHw@mail.gmail.com/ Reported-by: [email protected] Fixes: af28141 ("block: freeze the queue in queue_attr_store") Tested-by: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Nilay Shroff <[email protected]> Reviewed-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

[ Upstream commit 953e549 ] Lockdep gives a false positive splat as it can't distinguish the lock which is taken by different IRQ descriptors from different IRQ chips that are organized in a way of a hierarchy: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc5-next-20241101-00148-g9fabf8160b53 Rust-for-Linux#562 Tainted: G W ------------------------------------------------------ modprobe/141 is trying to acquire lock: ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90 but task is already holding lock: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 which lock already depends on the new lock. -> Rust-for-Linux#3 (&d->lock){+.+.}-{4:4}: -> Rust-for-Linux#2 (&desc->request_mutex){+.+.}-{4:4}: -> #1 (ipclock){+.+.}-{4:4}: -> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}: Chain exists of: intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&d->lock); lock(&desc->request_mutex); lock(&d->lock); lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock); *** DEADLOCK *** 3 locks held by modprobe/141: #0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250 #1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790 Rust-for-Linux#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 Set a lockdep class when we map the IRQ so that it doesn't warn about a lockdep bug that doesn't exist. Fixes: 4af8be6 ("regmap: Convert regmap_irq to use irq_domain") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f364cde ] LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ Rust-for-Linux#3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: 7ac07a2 ("zram: preparation for multi-zcomp support") Signed-off-by: Liu Shixin <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Minchan Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 0b83c86 upstream. The function blk_revalidate_disk_zones() calls the function disk_update_zone_resources() after freezing the device queue. In turn, disk_update_zone_resources() calls queue_limits_start_update() which takes a queue limits mutex lock, resulting in the ordering: q->q_usage_counter check -> q->limits_lock. However, the usual ordering is to always take a queue limit lock before freezing the queue to commit the limits updates, e.g., the code pattern: lim = queue_limits_start_update(q); ... blk_mq_freeze_queue(q); ret = queue_limits_commit_update(q, &lim); blk_mq_unfreeze_queue(q); Thus, blk_revalidate_disk_zones() introduces a potential circular locking dependency deadlock that lockdep sometimes catches with the splat: [ 51.934109] ====================================================== [ 51.935916] WARNING: possible circular locking dependency detected [ 51.937561] 6.12.0+ #2107 Not tainted [ 51.938648] ------------------------------------------------------ [ 51.940351] kworker/u16:4/157 is trying to acquire lock: [ 51.941805] ffff9fff0aa0bea8 (&q->limits_lock){+.+.}-{4:4}, at: disk_update_zone_resources+0x86/0x170 [ 51.944314] but task is already holding lock: [ 51.945688] ffff9fff0aa0b890 (&q->q_usage_counter(queue)Rust-for-Linux#3){++++}-{0:0}, at: blk_revalidate_disk_zones+0x15f/0x340 [ 51.948527] which lock already depends on the new lock. [ 51.951296] the existing dependency chain (in reverse order) is: [ 51.953708] -> #1 (&q->q_usage_counter(queue)Rust-for-Linux#3){++++}-{0:0}: [ 51.956131] blk_queue_enter+0x1c9/0x1e0 [ 51.957290] blk_mq_alloc_request+0x187/0x2a0 [ 51.958365] scsi_execute_cmd+0x78/0x490 [scsi_mod] [ 51.959514] read_capacity_16+0x111/0x410 [sd_mod] [ 51.960693] sd_revalidate_disk.isra.0+0x872/0x3240 [sd_mod] [ 51.962004] sd_probe+0x2d7/0x520 [sd_mod] [ 51.962993] really_probe+0xd5/0x330 [ 51.963898] __driver_probe_device+0x78/0x110 [ 51.964925] driver_probe_device+0x1f/0xa0 [ 51.965916] __driver_attach_async_helper+0x60/0xe0 [ 51.967017] async_run_entry_fn+0x2e/0x140 [ 51.968004] process_one_work+0x21f/0x5a0 [ 51.968987] worker_thread+0x1dc/0x3c0 [ 51.969868] kthread+0xe0/0x110 [ 51.970377] ret_from_fork+0x31/0x50 [ 51.970983] ret_from_fork_asm+0x11/0x20 [ 51.971587] -> #0 (&q->limits_lock){+.+.}-{4:4}: [ 51.972479] __lock_acquire+0x1337/0x2130 [ 51.973133] lock_acquire+0xc5/0x2d0 [ 51.973691] __mutex_lock+0xda/0xcf0 [ 51.974300] disk_update_zone_resources+0x86/0x170 [ 51.975032] blk_revalidate_disk_zones+0x16c/0x340 [ 51.975740] sd_zbc_revalidate_zones+0x73/0x160 [sd_mod] [ 51.976524] sd_revalidate_disk.isra.0+0x465/0x3240 [sd_mod] [ 51.977824] sd_probe+0x2d7/0x520 [sd_mod] [ 51.978917] really_probe+0xd5/0x330 [ 51.979915] __driver_probe_device+0x78/0x110 [ 51.981047] driver_probe_device+0x1f/0xa0 [ 51.982143] __driver_attach_async_helper+0x60/0xe0 [ 51.983282] async_run_entry_fn+0x2e/0x140 [ 51.984319] process_one_work+0x21f/0x5a0 [ 51.985873] worker_thread+0x1dc/0x3c0 [ 51.987289] kthread+0xe0/0x110 [ 51.988546] ret_from_fork+0x31/0x50 [ 51.989926] ret_from_fork_asm+0x11/0x20 [ 51.991376] other info that might help us debug this: [ 51.994127] Possible unsafe locking scenario: [ 51.995651] CPU0 CPU1 [ 51.996694] ---- ---- [ 51.997716] lock(&q->q_usage_counter(queue)Rust-for-Linux#3); [ 51.998817] lock(&q->limits_lock); [ 52.000043] lock(&q->q_usage_counter(queue)Rust-for-Linux#3); [ 52.001638] lock(&q->limits_lock); [ 52.002485] *** DEADLOCK *** Prevent this issue by moving the calls to blk_mq_freeze_queue() and blk_mq_unfreeze_queue() around the call to queue_limits_commit_update() in disk_update_zone_resources(). In case of revalidation failure, the call to disk_free_zone_resources() in blk_revalidate_disk_zones() is still done with the queue frozen as before. Fixes: 843283e ("block: Fake max open zones limit when there is no limit") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

syzbot reports that a recent fix causes nesting issues between the (now) raw timeoutlock and the eventfd locking: ============================= [ BUG: Invalid wait context ] 6.13.0-rc4-00080-g9828a4c0901f Rust-for-Linux#29 Not tainted ----------------------------- kworker/u32:0/68094 is trying to lock: ffff000014d7a520 (&ctx->wqh#2){..-.}-{3:3}, at: eventfd_signal_mask+0x64/0x180 other info that might help us debug this: context-{5:5} 6 locks held by kworker/u32:0/68094: #0: ffff0000c1d98148 ((wq_completion)iou_exit){+.+.}-{0:0}, at: process_one_work+0x4e8/0xfc0 Rust-for-Linux#1: ffff80008d927c78 ((work_completion)(&ctx->exit_work)){+.+.}-{0:0}, at: process_one_work+0x53c/0xfc0 Rust-for-Linux#2: ffff0000c59bc3d8 (&ctx->completion_lock){+.+.}-{3:3}, at: io_kill_timeouts+0x40/0x180 Rust-for-Linux#3: ffff0000c59bc358 (&ctx->timeout_lock){-.-.}-{2:2}, at: io_kill_timeouts+0x48/0x180 Rust-for-Linux#4: ffff800085127aa0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x8/0x38 Rust-for-Linux#5: ffff800085127aa0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x8/0x38 stack backtrace: CPU: 7 UID: 0 PID: 68094 Comm: kworker/u32:0 Not tainted 6.13.0-rc4-00080-g9828a4c0901f Rust-for-Linux#29 Hardware name: linux,dummy-virt (DT) Workqueue: iou_exit io_ring_exit_work Call trace: show_stack+0x1c/0x30 (C) __dump_stack+0x24/0x30 dump_stack_lvl+0x60/0x80 dump_stack+0x14/0x20 __lock_acquire+0x19f8/0x60c8 lock_acquire+0x1a4/0x540 _raw_spin_lock_irqsave+0x90/0xd0 eventfd_signal_mask+0x64/0x180 io_eventfd_signal+0x64/0x108 io_req_local_work_add+0x294/0x430 __io_req_task_work_add+0x1c0/0x270 io_kill_timeout+0x1f0/0x288 io_kill_timeouts+0xd4/0x180 io_uring_try_cancel_requests+0x2e8/0x388 io_ring_exit_work+0x150/0x550 process_one_work+0x5e8/0xfc0 worker_thread+0x7ec/0xc80 kthread+0x24c/0x300 ret_from_fork+0x10/0x20 because after the preempt-rt fix for the timeout lock nesting inside the io-wq lock, we now have the eventfd spinlock nesting inside the raw timeout spinlock. Rather than play whack-a-mole with other nesting on the timeout lock, split the deletion and killing of timeouts so queueing the task_work for the timeout cancelations can get done outside of the timeout lock. Reported-by: [email protected] Fixes: 020b40f ("io_uring: make ctx->timeout_lock a raw spinlock") Signed-off-by: Jens Axboe <[email protected]>

…le_direct_reclaim() The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac Rust-for-Linux#1 [ffff80002cb6f900] __schedule at ffff800008abbd1c Rust-for-Linux#2 [ffff80002cb6f990] schedule at ffff800008abc50c Rust-for-Linux#3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 Rust-for-Linux#4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 Rust-for-Linux#5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 Rust-for-Linux#6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 Rust-for-Linux#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 Rust-for-Linux#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 Rust-for-Linux#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

…nt message Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 Rust-for-Linux#1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 Rust-for-Linux#3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 Rust-for-Linux#4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 Rust-for-Linux#5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ Rust-for-Linux#34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information. Link: https://lkml.kernel.org/r/[email protected] Fixes: 3a6f33d ("mm/kmemleak: use %pK to display kernel pointers in backtrace") Signed-off-by: Alessandro Carminati <[email protected]> Acked-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: Clément Léger <[email protected]> Cc: Alessandro Carminati <[email protected]> Cc: Eric Chanudet <[email protected]> Cc: Gabriele Paoloni <[email protected]> Cc: Juri Lelli <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Weißschuh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [Rust-for-Linux#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ Rust-for-Linux#3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956 Fixes: c9474b7 ("drm/xe: Wedge the entire device") Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]> (cherry picked from commit 5001ef3) Signed-off-by: Thomas Hellström <[email protected]>

We found a timeout problem with the pldm command on our system. The reason is that the MCTP-I3C driver has a race condition when receiving multiple-packet messages in multi-thread, resulting in a wrong packet order problem. We identified this problem by adding a debug message to the mctp_i3c_read function. According to the MCTP spec, a multiple-packet message must be composed in sequence, and if there is a wrong sequence, the whole message will be discarded and wait for the next SOM. For example, SOM → Pkt Seq Rust-for-Linux#2 → Pkt Seq Rust-for-Linux#1 → Pkt Seq Rust-for-Linux#3 → EOM. Therefore, we try to solve this problem by adding a mutex to the mctp_i3c_read function. Before the modification, when a command requesting a multiple-packet message response is sent consecutively, an error usually occurs within 100 loops. After the mutex, it can go through 40000 loops without any error, and it seems to run well. Fixes: c8755b2 ("mctp i3c: MCTP I3C driver") Signed-off-by: Leo Yang <[email protected]> Link: https://patch.msgid.link/[email protected] [[email protected]: dropped already answered question from changelog] Signed-off-by: Paolo Abeni <[email protected]>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.13, part Rust-for-Linux#3 - Always check page state in hyp_ack_unshare() - Align set_id_regs selftest with the fact that ASIDBITS field is RO - Various vPMU fixes for bugs that only affect nested virt

…nce changes When starting/proceeding MCC, it will abort an ongoing hw scan process. In the proceeding cases, it unexpectedly tries to abort a non-exist hw scan process. Then, a trace shown at the bottom will happen. This problem is caused by a previous commit which changed some call sequence inside rtw89_hw_scan_complete() to fix some coex problems. These changes lead to our scanning flag was not cleared when proceeding MCC. To keep the fixes on coex, and resolve the problem here, re-consider the related call sequence. The known sequence requirements are listed below. * the old sequence: A. notify coex B. clear scanning flag C. proceed chanctx C-1. set channel C-2. proceed MCC (the problem: A needs to be after C-1) * the current sequence: C. proceed chanctx C-1. set channel C-2. proceed MCC A. notify coex B. clear scanning flag (the problem: C-2 needs to be after B) So, now let hw scan caller pass a callback to proceed chanctx if needed. Then, the new sequence will be like the below. C-1. set channel A. notify coex B. clear scanning flag C-2. proceed MCC The following is the kernel log for the problem in current sequence. rtw89_8852be 0000:04:00.0: rtw89_hw_scan_offload failed ret -110 ------------[ cut here ]------------ [...] CPU: 2 PID: 3991 Comm: kworker/u16:0 Tainted: G OE 6.6.17 Rust-for-Linux#3 Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018 Workqueue: events_unbound wiphy_work_cancel [cfg80211] RIP: 0010:ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] Code: 9c 24 d0 11 00 00 49 39 dd 0f 85 46 ff ff ff 4c 89 e7 e8 09 2d RSP: 0018:ffffb27783643d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8a2280964bc0 RSI: 0000000000000000 RDI: ffff8a23df580900 RBP: ffffb27783643d88 R08: 0000000000000001 R09: 0000000000000400 R10: 0000000000000000 R11: 0000000000008268 R12: ffff8a23df580900 R13: ffff8a23df581b00 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8a258e680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f26a0654000 CR3: 000000002ea2e002 CR4: 00000000001706e0 Call Trace: <TASK> ? show_regs+0x68/0x70 ? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] ? __warn+0x8f/0x150 ? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] ? report_bug+0x1f5/0x200 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x19/0x70 ? asm_exc_invalid_op+0x1b/0x20 ? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] ieee80211_scan_work+0x14a/0x650 [mac80211] ? __queue_work+0x10f/0x410 wiphy_work_cancel+0x2fb/0x310 [cfg80211] process_scheduled_works+0x9d/0x390 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x15b/0x2d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x108/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Fixes: f16c40a ("wifi: rtw89: Fix TX fail with A2DP after scanning") Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected]

Tariq Toukan says: ==================== net/mlx5e: CT: Add support for hardware steering This series start with one more HWS patch by Yevgeny, followed by patches that add support for connection tracking in hardware steering mode. It consists of: - patch Rust-for-Linux#2 hooks up the CT ops for the new mode in the right places. - patch Rust-for-Linux#3 moves a function into a common file, so it can be reused. - patch Rust-for-Linux#4 uses the HWS API to implement connection tracking. The main advantage of hardware steering compared to software steering is vastly improved performance when adding/removing/updating rules. Using the T-Rex traffic generator to initiate multi-million UDP flows per second, a kernel running with these patches was able to offload ~600K unique UDP flows per second, a number around ~7x larger than software steering was able to achieve on the same hardware (256-thread AMD EPYC, 512 GB RAM, ConnectX 7 b2b). ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 Rust-for-Linux#1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 Rust-for-Linux#2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 Rust-for-Linux#3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 Rust-for-Linux#4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> Rust-for-Linux#5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 Rust-for-Linux#6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 Rust-for-Linux#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 Rust-for-Linux#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 Rust-for-Linux#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Yang Shi <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Fix a lockdep warning [1] observed during the write combining test. The warning indicates a potential nested lock scenario that could lead to a deadlock. However, this is a false positive alarm because the SF lock and its parent lock are distinct ones. The lockdep confusion arises because the locks belong to the same object class (i.e., struct mlx5_core_dev). To resolve this, the code has been refactored to avoid taking both locks. Instead, only the parent lock is acquired. [1] raw_ethernet_bw/2118 is trying to acquire lock: [ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.620270] [ 213.620270] but task is already holding lock: [ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.622045] [ 213.622045] other info that might help us debug this: [ 213.622778] Possible unsafe locking scenario: [ 213.622778] [ 213.623465] CPU0 [ 213.623815] ---- [ 213.624148] lock(&dev->wc_state_lock); [ 213.624615] lock(&dev->wc_state_lock); [ 213.625071] [ 213.625071] *** DEADLOCK *** [ 213.625071] [ 213.625805] May be due to missing lock nesting notation [ 213.625805] [ 213.626522] 4 locks held by raw_ethernet_bw/2118: [ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0}, at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.628088] Rust-for-Linux#1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3}, at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs] [ 213.629094] Rust-for-Linux#2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3}, at: ib_init_ucontext+0x49/0xf0 [ib_uverbs] [ 213.630106] Rust-for-Linux#3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.631185] [ 213.631185] stack backtrace: [ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted 6.12.0-rc7_internal_net_next_mlx5_89a0ad0 Rust-for-Linux#1 [ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 213.633785] Call Trace: [ 213.634099] [ 213.634393] dump_stack_lvl+0x7e/0xc0 [ 213.634806] print_deadlock_bug+0x278/0x3c0 [ 213.635265] __lock_acquire+0x15f4/0x2c40 [ 213.635712] lock_acquire+0xcd/0x2d0 [ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib] [ 213.637277] __mutex_lock+0x81/0xda0 [ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70 [ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib] [ 213.641144] ? debug_mutex_init+0x33/0x40 [ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib] [ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs] [ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0 [ib_uverbs] [ 213.643426] ? _copy_from_user+0x46/0x80 [ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs] [ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130 [ib_uverbs] [ 213.645213] ? __lock_acquire+0xa99/0x2c40 [ 213.645675] ? lock_acquire+0xcd/0x2d0 [ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.646625] ? reacquire_held_locks+0xcf/0x1f0 [ 213.647102] ? do_user_addr_fault+0x45d/0x770 [ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs] [ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0 [ 213.649060] ? do_user_addr_fault+0x4a8/0x770 [ 213.649528] do_syscall_64+0x6d/0x140 [ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 213.650478] RIP: 0033:0x7fa179b0737b [ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 [ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX: 00007fa179b0737b [ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI: 0000000000000003 [ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09: 0000000000000002 [ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12: 00007ffd2e6d487c [ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15: 00007ffd2e6d4f70 Fixes: d98995b ("net/mlx5: Reimplement write combining test") Signed-off-by: Yishai Hadas <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Reviewed-by: Larysa Zaremba <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>

This commit addresses a circular locking dependency issue within the GFX isolation mechanism. The problem was identified by a warning indicating a potential deadlock due to inconsistent lock acquisition order. - The `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` functions previously acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`, leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is called while `enforce_isolation_mutex` is held, and `amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is held, it can create a circular dependency. By ensuring consistent lock usage, this fix resolves the issue: [ 606.297333] ====================================================== [ 606.297343] WARNING: possible circular locking dependency detected [ 606.297353] 6.10.0-amd-mlkd-610-311224-lof Rust-for-Linux#19 Tainted: G OE [ 606.297365] ------------------------------------------------------ [ 606.297375] kworker/u96:3/3825 is trying to acquire lock: [ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610 [ 606.297413] but task is already holding lock: [ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.297725] which lock already depends on the new lock. [ 606.297738] the existing dependency chain (in reverse order) is: [ 606.297749] -> Rust-for-Linux#2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}: [ 606.297765] __mutex_lock+0x85/0x930 [ 606.297776] mutex_lock_nested+0x1b/0x30 [ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.298880] process_one_work+0x21e/0x680 [ 606.298890] worker_thread+0x190/0x350 [ 606.298899] kthread+0xe7/0x120 [ 606.298908] ret_from_fork+0x3c/0x60 [ 606.298919] ret_from_fork_asm+0x1a/0x30 [ 606.298929] -> Rust-for-Linux#1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}: [ 606.298947] __mutex_lock+0x85/0x930 [ 606.298956] mutex_lock_nested+0x1b/0x30 [ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu] [ 606.299190] process_one_work+0x21e/0x680 [ 606.299199] worker_thread+0x190/0x350 [ 606.299208] kthread+0xe7/0x120 [ 606.299217] ret_from_fork+0x3c/0x60 [ 606.299227] ret_from_fork_asm+0x1a/0x30 [ 606.299236] -> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}: [ 606.299257] __lock_acquire+0x16f9/0x2810 [ 606.299267] lock_acquire+0xd1/0x300 [ 606.299276] __flush_work+0x250/0x610 [ 606.299286] cancel_delayed_work_sync+0x71/0x80 [ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.300369] process_one_work+0x21e/0x680 [ 606.300378] worker_thread+0x190/0x350 [ 606.300387] kthread+0xe7/0x120 [ 606.300396] ret_from_fork+0x3c/0x60 [ 606.300406] ret_from_fork_asm+0x1a/0x30 [ 606.300416] other info that might help us debug this: [ 606.300428] Chain exists of: (work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex [ 606.300458] Possible unsafe locking scenario: [ 606.300468] CPU0 CPU1 [ 606.300476] ---- ---- [ 606.300484] lock(&adev->gfx.kfd_sch_mutex); [ 606.300494] lock(&adev->enforce_isolation_mutex); [ 606.300508] lock(&adev->gfx.kfd_sch_mutex); [ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)); [ 606.300536] *** DEADLOCK *** [ 606.300546] 5 locks held by kworker/u96:3/3825: [ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 606.300577] Rust-for-Linux#1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 606.300600] Rust-for-Linux#2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu] [ 606.300837] Rust-for-Linux#3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.301062] Rust-for-Linux#4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610 [ 606.301083] stack backtrace: [ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof Rust-for-Linux#19 [ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024 [ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched] [ 606.301140] Call Trace: [ 606.301146] <TASK> [ 606.301154] dump_stack_lvl+0x9b/0xf0 [ 606.301166] dump_stack+0x10/0x20 [ 606.301175] print_circular_bug+0x26c/0x340 [ 606.301187] check_noncircular+0x157/0x170 [ 606.301197] ? register_lock_class+0x48/0x490 [ 606.301213] __lock_acquire+0x16f9/0x2810 [ 606.301230] lock_acquire+0xd1/0x300 [ 606.301239] ? __flush_work+0x232/0x610 [ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301261] ? mark_held_locks+0x54/0x90 [ 606.301274] ? __flush_work+0x232/0x610 [ 606.301284] __flush_work+0x250/0x610 [ 606.301293] ? __flush_work+0x232/0x610 [ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10 [ 606.301318] ? mark_held_locks+0x54/0x90 [ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301345] cancel_delayed_work_sync+0x71/0x80 [ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched] [ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.303388] process_one_work+0x21e/0x680 [ 606.303409] worker_thread+0x190/0x350 [ 606.303424] ? __pfx_worker_thread+0x10/0x10 [ 606.303437] kthread+0xe7/0x120 [ 606.303449] ? __pfx_kthread+0x10/0x10 [ 606.303463] ret_from_fork+0x3c/0x60 [ 606.303476] ? __pfx_kthread+0x10/0x10 [ 606.303489] ret_from_fork_asm+0x1a/0x30 [ 606.303512] </TASK> v2: Refactor lock handling to resolve circular dependency (Alex) - Introduced a `sched_work` flag to defer the call to `amdgpu_gfx_kfd_sch_ctrl` until after releasing `enforce_isolation_mutex`. - This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside the critical section, preventing the circular dependency and deadlock. - The `sched_work` flag is set within the mutex-protected section if conditions are met, and the actual function call is made afterward. - This approach ensures consistent lock acquisition order. Fixes: afefd6f ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization") Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Suggested-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 0b6b2dd) Cc: [email protected]

Petr Machata says: ==================== mlxsw: Move Tx header handling to PCI driver Amit Cohen writes: Tx header should be added to all packets transmitted from the CPU to Spectrum ASICs. Historically, handling this header was added as a driver function, as Tx header is different between Spectrum and Switch-X. From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant code was removed. For now, there is no justification to handle Tx header as part of spectrum.c, we can handle this as part of PCI, in skb_transmit(). This change will also be useful when XDP support will be added to mlxsw, as for XDP_TX and XDP_REDIRECT actions, Tx header should be added before transmitting the packet. Patch set overview: Patches Rust-for-Linux#1-Rust-for-Linux#2 add structure to store Tx header info and initialize it Patch Rust-for-Linux#3 moves definitions of Tx header fields to txheader.h Patch Rust-for-Linux#4 moves Tx header handling to PCI driver Patch Rust-for-Linux#5 removes unnecessary attribute ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Hou Tao says: ==================== The patch set continues the previous work [1] to move all the freeings of htab elements out of bucket lock. One motivation for the patch set is the locking problem reported by Sebastian [2]: the freeing of bpf_timer under PREEMPT_RT may acquire a spin-lock (namely softirq_expiry_lock). However the freeing procedure for htab element has already held a raw-spin-lock (namely bucket lock), and it will trigger the warning: "BUG: scheduling while atomic" as demonstrated by the selftests patch. Another motivation is to reduce the locked scope of bucket lock. However, the patch set doesn't move all freeing of htab element out of bucket lock, it still keep the free of special fields in pre-allocated hash map under the protect of bucket lock in htab_map_update_elem(). The patch set is structured as follows: * Patch Rust-for-Linux#1 moves the element freeing out of bucket lock for htab_lru_map_delete_node(). However the freeing is still in the locked scope of LRU raw spin lock. * Patch Rust-for-Linux#2~Rust-for-Linux#3 move the element freeing out of bucket lock for __htab_map_lookup_and_delete_elem() * Patch Rust-for-Linux#4 cancels the bpf_timer in two steps to fix the locking problem in htab_map_update_elem() for PREEMPT_PRT. * Patch Rust-for-Linux#5 adds a selftest for the locking problem Please see individual patches for more details. Comments are always welcome. --- v3: * patch Rust-for-Linux#1: update the commit message to state that the freeing of special field is still in the locked scope of LRU raw spin lock * patch Rust-for-Linux#4: cancel the bpf_timer in two steps only for PREEMPT_RT (suggested by Alexei) v2: https://lore.kernel.org/bpf/[email protected] * cancels the bpf timer in two steps instead of breaking the reuse the refill of per-cpu ->extra_elems into two steps v1: https://lore.kernel.org/bpf/[email protected] [1]: https://lore.kernel.org/bpf/[email protected] [2]: https://lore.kernel.org/bpf/[email protected] ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 #6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 #7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 #8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 #9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Yang Shi <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

When COWing a relocation tree path, at relocation.c:replace_path(), we can trigger a lockdep splat while we are in the btrfs_search_slot() call against the relocation root. This happens in that callchain at ctree.c:read_block_for_search() when we happen to find a child extent buffer already loaded through the fs tree with a lockdep class set to the fs tree. So when we attempt to lock that extent buffer through a relocation tree we have to reset the lockdep class to the class for a relocation tree, since a relocation tree has extent buffers that used to belong to a fs tree and may currently be already loaded (we swap extent buffers between the two trees at the end of replace_path()). However we are missing calls to btrfs_maybe_reset_lockdep_class() to reset the lockdep class at ctree.c:read_block_for_search() before we read lock an extent buffer, just like we did for btrfs_search_slot() in commit b40130b ("btrfs: fix lockdep splat with reloc root extent buffers"). So add the missing btrfs_maybe_reset_lockdep_class() calls before the attempts to read lock an extent buffer at ctree.c:read_block_for_search(). The lockdep splat was reported by syzbot and it looks like this: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Not tainted ------------------------------------------------------ syz.0.0/5335 is trying to acquire lock: ffff8880545dbc38 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 but task is already holding lock: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-treloc-02/1){+.+.}-{4:4}: reacquire_held_locks+0x3eb/0x690 kernel/locking/lockdep.c:5374 __lock_release kernel/locking/lockdep.c:5563 [inline] lock_release+0x396/0xa30 kernel/locking/lockdep.c:5870 up_write+0x79/0x590 kernel/locking/rwsem.c:1629 btrfs_force_cow_block+0x14b3/0x1fd0 fs/btrfs/ctree.c:660 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (btrfs-tree-01/1){+.+.}-{4:4}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_write_nested+0xa2/0x220 kernel/locking/rwsem.c:1693 btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 btrfs_init_new_buffer fs/btrfs/extent-tree.c:5052 [inline] btrfs_alloc_tree_block+0x41c/0x1440 fs/btrfs/extent-tree.c:5132 btrfs_force_cow_block+0x526/0x1fd0 fs/btrfs/ctree.c:573 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4351 btrfs_insert_empty_item fs/btrfs/ctree.h:688 [inline] btrfs_insert_inode_ref+0x2bb/0xf80 fs/btrfs/inode-item.c:330 btrfs_rename_exchange fs/btrfs/inode.c:7990 [inline] btrfs_rename2+0xcb7/0x2b90 fs/btrfs/inode.c:8374 vfs_rename+0xbdb/0xf00 fs/namei.c:5067 do_renameat2+0xd94/0x13f0 fs/namei.c:5224 __do_sys_renameat2 fs/namei.c:5258 [inline] __se_sys_renameat2 fs/namei.c:5255 [inline] __x64_sys_renameat2+0xce/0xe0 fs/namei.c:5255 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (btrfs-tree-01){++++}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: btrfs-tree-01 --> btrfs-tree-01/1 --> btrfs-treloc-02/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-treloc-02/1); lock(btrfs-tree-01/1); lock(btrfs-treloc-02/1); rlock(btrfs-tree-01); *** DEADLOCK *** 8 locks held by syz.0.0/5335: #0: ffff88801e3ae420 (sb_writers#13){.+.+}-{0:0}, at: mnt_want_write_file+0x5e/0x200 fs/namespace.c:559 #1: ffff888052c760d0 (&fs_info->reclaim_bgs_lock){+.+.}-{4:4}, at: __btrfs_balance+0x4c2/0x26b0 fs/btrfs/volumes.c:4183 #2: ffff888052c74850 (&fs_info->cleaner_mutex){+.+.}-{4:4}, at: btrfs_relocate_block_group+0x775/0xd90 fs/btrfs/relocation.c:4086 #3: ffff88801e3ae610 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xf11/0x1ad0 fs/btrfs/relocation.c:1659 #4: ffff888052c76470 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #5: ffff888052c76498 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #6: ffff8880545db878 (btrfs-tree-01/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 #7: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 stack backtrace: CPU: 0 UID: 0 PID: 5335 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1ac6985d29 Code: ff ff c3 (...) RSP: 002b:00007f1ac63fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f1ac6b76160 RCX: 00007f1ac6985d29 RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000007 RBP: 00007f1ac6a01b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000001 R14: 00007f1ac6b76160 R15: 00007fffda145a88 </TASK> Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 9978599 ("btrfs: reduce lock contention when eb cache miss for btree search") Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

…cal section A circular lock dependency splat has been seen involving down_trylock(). [ 4011.795602] ====================================================== [ 4011.795603] WARNING: possible circular locking dependency detected [ 4011.795607] 6.12.0-41.el10.s390x+debug [ 4011.795612] ------------------------------------------------------ [ 4011.795613] dd/32479 is trying to acquire lock: [ 4011.795617] 0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90 [ 4011.795636] [ 4011.795636] but task is already holding lock: [ 4011.795637] 000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0 the existing dependency chain (in reverse order) is: -> Rust-for-Linux#4 (&zone->lock){-.-.}-{2:2}: -> Rust-for-Linux#3 (hrtimer_bases.lock){-.-.}-{2:2}: -> Rust-for-Linux#2 (&rq->__lock){-.-.}-{2:2}: -> Rust-for-Linux#1 (&p->pi_lock){-.-.}-{2:2}: -> #0 ((console_sem).lock){-.-.}-{2:2}: The console_sem -> pi_lock dependency is due to calling try_to_wake_up() while holding the console.sem raw_spinlock. This dependency can be broken by using wake_q to do the wakeup instead of calling try_to_wake_up() under the console_sem lock. This will also make the semaphore's raw_spinlock become a terminal lock without taking any further locks underneath it. The hrtimer_bases.lock is a raw_spinlock while zone->lock is a spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via the debug_objects_fill_pool() helper function in the debugobjects code. [ 4011.795646] -> Rust-for-Linux#4 (&zone->lock){-.-.}-{2:2}: [ 4011.795650] __lock_acquire+0xe86/0x1cc0 [ 4011.795655] lock_acquire.part.0+0x258/0x630 [ 4011.795657] lock_acquire+0xb8/0xe0 [ 4011.795659] _raw_spin_lock_irqsave+0xb4/0x120 [ 4011.795663] rmqueue_bulk+0xac/0x8f0 [ 4011.795665] __rmqueue_pcplist+0x580/0x830 [ 4011.795667] rmqueue_pcplist+0xfc/0x470 [ 4011.795669] rmqueue.isra.0+0xdec/0x11b0 [ 4011.795671] get_page_from_freelist+0x2ee/0xeb0 [ 4011.795673] __alloc_pages_noprof+0x2c2/0x520 [ 4011.795676] alloc_pages_mpol_noprof+0x1fc/0x4d0 [ 4011.795681] alloc_pages_noprof+0x8c/0xe0 [ 4011.795684] allocate_slab+0x320/0x460 [ 4011.795686] ___slab_alloc+0xa58/0x12b0 [ 4011.795688] __slab_alloc.isra.0+0x42/0x60 [ 4011.795690] kmem_cache_alloc_noprof+0x304/0x350 [ 4011.795692] fill_pool+0xf6/0x450 [ 4011.795697] debug_object_activate+0xfe/0x360 [ 4011.795700] enqueue_hrtimer+0x34/0x190 [ 4011.795703] __run_hrtimer+0x3c8/0x4c0 [ 4011.795705] __hrtimer_run_queues+0x1b2/0x260 [ 4011.795707] hrtimer_interrupt+0x316/0x760 [ 4011.795709] do_IRQ+0x9a/0xe0 [ 4011.795712] do_irq_async+0xf6/0x160 Normally raw_spinlock to spinlock dependency is not legit and will be warned if PROVE_RAW_LOCK_NESTING is enabled, but debug_objects_fill_pool() is an exception as it explicitly allows this dependency for non-PREEMPT_RT kernel without causing PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is legit and not a bug. Anyway, semaphore is the only locking primitive left that is still using try_to_wake_up() to do wakeup inside critical section, all the other locking primitives had been migrated to use wake_q to do wakeup outside of the critical section. It is also possible that there are other circular locking dependencies involving printk/console_sem or other existing/new semaphores lurking somewhere which may show up in the future. Let just do the migration now to wake_q to avoid headache like this. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Boqun Feng <[email protected]> Link: https://lore.kernel.org/r/[email protected]

We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>

…nce changes [ Upstream commit e47f0a5 ] When starting/proceeding MCC, it will abort an ongoing hw scan process. In the proceeding cases, it unexpectedly tries to abort a non-exist hw scan process. Then, a trace shown at the bottom will happen. This problem is caused by a previous commit which changed some call sequence inside rtw89_hw_scan_complete() to fix some coex problems. These changes lead to our scanning flag was not cleared when proceeding MCC. To keep the fixes on coex, and resolve the problem here, re-consider the related call sequence. The known sequence requirements are listed below. * the old sequence: A. notify coex B. clear scanning flag C. proceed chanctx C-1. set channel C-2. proceed MCC (the problem: A needs to be after C-1) * the current sequence: C. proceed chanctx C-1. set channel C-2. proceed MCC A. notify coex B. clear scanning flag (the problem: C-2 needs to be after B) So, now let hw scan caller pass a callback to proceed chanctx if needed. Then, the new sequence will be like the below. C-1. set channel A. notify coex B. clear scanning flag C-2. proceed MCC The following is the kernel log for the problem in current sequence. rtw89_8852be 0000:04:00.0: rtw89_hw_scan_offload failed ret -110 ------------[ cut here ]------------ [...] CPU: 2 PID: 3991 Comm: kworker/u16:0 Tainted: G OE 6.6.17 #3 Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018 Workqueue: events_unbound wiphy_work_cancel [cfg80211] RIP: 0010:ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] Code: 9c 24 d0 11 00 00 49 39 dd 0f 85 46 ff ff ff 4c 89 e7 e8 09 2d RSP: 0018:ffffb27783643d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8a2280964bc0 RSI: 0000000000000000 RDI: ffff8a23df580900 RBP: ffffb27783643d88 R08: 0000000000000001 R09: 0000000000000400 R10: 0000000000000000 R11: 0000000000008268 R12: ffff8a23df580900 R13: ffff8a23df581b00 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8a258e680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f26a0654000 CR3: 000000002ea2e002 CR4: 00000000001706e0 Call Trace: <TASK> ? show_regs+0x68/0x70 ? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] ? __warn+0x8f/0x150 ? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] ? report_bug+0x1f5/0x200 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x19/0x70 ? asm_exc_invalid_op+0x1b/0x20 ? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211] ieee80211_scan_work+0x14a/0x650 [mac80211] ? __queue_work+0x10f/0x410 wiphy_work_cancel+0x2fb/0x310 [cfg80211] process_scheduled_works+0x9d/0x390 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x15b/0x2d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x108/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Fixes: f16c40a ("wifi: rtw89: Fix TX fail with A2DP after scanning") Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 600258d ] Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binfmt_misc intel_rapl_msr intel_rapl_common kvm_amd ccp kvm input_leds serio_raw qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx libcrc32c raid1 raid0 mlx5_core crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 ahci mlxfw i2c_i801 libahci i2c_mux i2c_smbus psample virtio_rng pci_hyperv_intf aesni_intel crypto_simd cryptd CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x3b800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 5958372 ("xfrm: add RX datapath protection for IPsec packet offload mode") Signed-off-by: Alexandre Cassen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c7b87ce ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a216542 ] When COWing a relocation tree path, at relocation.c:replace_path(), we can trigger a lockdep splat while we are in the btrfs_search_slot() call against the relocation root. This happens in that callchain at ctree.c:read_block_for_search() when we happen to find a child extent buffer already loaded through the fs tree with a lockdep class set to the fs tree. So when we attempt to lock that extent buffer through a relocation tree we have to reset the lockdep class to the class for a relocation tree, since a relocation tree has extent buffers that used to belong to a fs tree and may currently be already loaded (we swap extent buffers between the two trees at the end of replace_path()). However we are missing calls to btrfs_maybe_reset_lockdep_class() to reset the lockdep class at ctree.c:read_block_for_search() before we read lock an extent buffer, just like we did for btrfs_search_slot() in commit b40130b ("btrfs: fix lockdep splat with reloc root extent buffers"). So add the missing btrfs_maybe_reset_lockdep_class() calls before the attempts to read lock an extent buffer at ctree.c:read_block_for_search(). The lockdep splat was reported by syzbot and it looks like this: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Not tainted ------------------------------------------------------ syz.0.0/5335 is trying to acquire lock: ffff8880545dbc38 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 but task is already holding lock: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-treloc-02/1){+.+.}-{4:4}: reacquire_held_locks+0x3eb/0x690 kernel/locking/lockdep.c:5374 __lock_release kernel/locking/lockdep.c:5563 [inline] lock_release+0x396/0xa30 kernel/locking/lockdep.c:5870 up_write+0x79/0x590 kernel/locking/rwsem.c:1629 btrfs_force_cow_block+0x14b3/0x1fd0 fs/btrfs/ctree.c:660 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (btrfs-tree-01/1){+.+.}-{4:4}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_write_nested+0xa2/0x220 kernel/locking/rwsem.c:1693 btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 btrfs_init_new_buffer fs/btrfs/extent-tree.c:5052 [inline] btrfs_alloc_tree_block+0x41c/0x1440 fs/btrfs/extent-tree.c:5132 btrfs_force_cow_block+0x526/0x1fd0 fs/btrfs/ctree.c:573 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4351 btrfs_insert_empty_item fs/btrfs/ctree.h:688 [inline] btrfs_insert_inode_ref+0x2bb/0xf80 fs/btrfs/inode-item.c:330 btrfs_rename_exchange fs/btrfs/inode.c:7990 [inline] btrfs_rename2+0xcb7/0x2b90 fs/btrfs/inode.c:8374 vfs_rename+0xbdb/0xf00 fs/namei.c:5067 do_renameat2+0xd94/0x13f0 fs/namei.c:5224 __do_sys_renameat2 fs/namei.c:5258 [inline] __se_sys_renameat2 fs/namei.c:5255 [inline] __x64_sys_renameat2+0xce/0xe0 fs/namei.c:5255 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (btrfs-tree-01){++++}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: btrfs-tree-01 --> btrfs-tree-01/1 --> btrfs-treloc-02/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-treloc-02/1); lock(btrfs-tree-01/1); lock(btrfs-treloc-02/1); rlock(btrfs-tree-01); *** DEADLOCK *** 8 locks held by syz.0.0/5335: #0: ffff88801e3ae420 (sb_writers#13){.+.+}-{0:0}, at: mnt_want_write_file+0x5e/0x200 fs/namespace.c:559 #1: ffff888052c760d0 (&fs_info->reclaim_bgs_lock){+.+.}-{4:4}, at: __btrfs_balance+0x4c2/0x26b0 fs/btrfs/volumes.c:4183 #2: ffff888052c74850 (&fs_info->cleaner_mutex){+.+.}-{4:4}, at: btrfs_relocate_block_group+0x775/0xd90 fs/btrfs/relocation.c:4086 #3: ffff88801e3ae610 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xf11/0x1ad0 fs/btrfs/relocation.c:1659 #4: ffff888052c76470 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #5: ffff888052c76498 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #6: ffff8880545db878 (btrfs-tree-01/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 #7: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 stack backtrace: CPU: 0 UID: 0 PID: 5335 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1ac6985d29 Code: ff ff c3 (...) RSP: 002b:00007f1ac63fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f1ac6b76160 RCX: 00007f1ac6985d29 RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000007 RBP: 00007f1ac6a01b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000001 R14: 00007f1ac6b76160 R15: 00007fffda145a88 </TASK> Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 9978599 ("btrfs: reduce lock contention when eb cache miss for btree search") Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Since commit 6037802 ("power: supply: core: implement extension API") there is the following ABBA deadlock (simplified) between the LED trigger code and the power-supply code: 1) When registering a power-supply class device, power_supply_register() calls led_trigger_register() from power_supply_create_triggers() in a scoped_guard(rwsem_read, &psy->extensions_sem) context. led_trigger_register() then in turn takes a LED subsystem lock. So here we have the following locking order: * Read-lock extensions_sem * Lock LED subsystem lock(s) 2) When registering a LED class device, with its default trigger set to a power-supply LED trigger (which has already been registered) The LED class code calls power_supply_led_trigger_activate() when setting up the default trigger. power_supply_led_trigger_activate() calls power_supply_get_property() to determine the initial value of to assign to the LED and that read-locks extensions_sem. So now we have the following locking order: * Lock LED subsystem lock(s) * Read-lock extensions_sem Fixing this is easy, there is no need to hold the extensions_sem when calling power_supply_create_triggers() since all triggers are always created rather then checking for the presence of certain attributes as power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers() out of the guard block to fix this. Here is the lockdep report fixed by this change: [ 31.249343] ====================================================== [ 31.249378] WARNING: possible circular locking dependency detected [ 31.249413] 6.13.0-rc6+ Rust-for-Linux#251 Tainted: G C E [ 31.249440] ------------------------------------------------------ [ 31.249471] (udev-worker)/553 is trying to acquire lock: [ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150 [ 31.249574] but task is already holding lock: [ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 [ 31.249657] which lock already depends on the new lock. [ 31.249696] the existing dependency chain (in reverse order) is: [ 31.249735] -> Rust-for-Linux#2 (&led_cdev->trigger_lock){+.+.}-{4:4}: [ 31.249778] down_write+0x3b/0xd0 [ 31.249803] led_trigger_set_default+0x34/0xe0 [ 31.249833] led_classdev_register_ext+0x311/0x3a0 [ 31.249863] input_leds_connect+0x1dc/0x2a0 [ 31.249889] input_attach_handler.isra.0+0x75/0x90 [ 31.249921] input_register_device.cold+0xa1/0x150 [ 31.249955] hidinput_connect+0x8a2/0xb80 [ 31.249982] hid_connect+0x582/0x5c0 [ 31.250007] hid_hw_start+0x3f/0x60 [ 31.250030] hid_device_probe+0x122/0x1f0 [ 31.250053] really_probe+0xde/0x340 [ 31.250080] __driver_probe_device+0x78/0x110 [ 31.250105] driver_probe_device+0x1f/0xa0 [ 31.250132] __device_attach_driver+0x85/0x110 [ 31.250160] bus_for_each_drv+0x78/0xc0 [ 31.250184] __device_attach+0xb0/0x1b0 [ 31.250207] bus_probe_device+0x94/0xb0 [ 31.250230] device_add+0x64a/0x860 [ 31.250252] hid_add_device+0xe5/0x240 [ 31.250279] usbhid_probe+0x4dc/0x620 [ 31.250303] usb_probe_interface+0xe4/0x2a0 [ 31.250329] really_probe+0xde/0x340 [ 31.250353] __driver_probe_device+0x78/0x110 [ 31.250377] driver_probe_device+0x1f/0xa0 [ 31.250404] __device_attach_driver+0x85/0x110 [ 31.250431] bus_for_each_drv+0x78/0xc0 [ 31.250455] __device_attach+0xb0/0x1b0 [ 31.250478] bus_probe_device+0x94/0xb0 [ 31.250501] device_add+0x64a/0x860 [ 31.250523] usb_set_configuration+0x606/0x8a0 [ 31.250552] usb_generic_driver_probe+0x3e/0x60 [ 31.250579] usb_probe_device+0x3d/0x120 [ 31.250605] really_probe+0xde/0x340 [ 31.250629] __driver_probe_device+0x78/0x110 [ 31.250653] driver_probe_device+0x1f/0xa0 [ 31.250680] __device_attach_driver+0x85/0x110 [ 31.250707] bus_for_each_drv+0x78/0xc0 [ 31.250731] __device_attach+0xb0/0x1b0 [ 31.250753] bus_probe_device+0x94/0xb0 [ 31.250776] device_add+0x64a/0x860 [ 31.250798] usb_new_device.cold+0x141/0x38f [ 31.250828] hub_event+0x1166/0x1980 [ 31.250854] process_one_work+0x20f/0x580 [ 31.250879] worker_thread+0x1d1/0x3b0 [ 31.250904] kthread+0xee/0x120 [ 31.250926] ret_from_fork+0x30/0x50 [ 31.250954] ret_from_fork_asm+0x1a/0x30 [ 31.250982] -> Rust-for-Linux#1 (triggers_list_lock){++++}-{4:4}: [ 31.251022] down_write+0x3b/0xd0 [ 31.251045] led_trigger_register+0x40/0x1b0 [ 31.251074] power_supply_register_led_trigger+0x88/0x150 [ 31.251107] power_supply_create_triggers+0x55/0xe0 [ 31.251135] __power_supply_register.part.0+0x34e/0x4a0 [ 31.251164] devm_power_supply_register+0x70/0xc0 [ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery] [ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c] [ 31.251272] i2c_device_probe+0x125/0x2b0 [ 31.251299] really_probe+0xde/0x340 [ 31.251324] __driver_probe_device+0x78/0x110 [ 31.251348] driver_probe_device+0x1f/0xa0 [ 31.251375] __driver_attach+0xba/0x1c0 [ 31.251398] bus_for_each_dev+0x6b/0xb0 [ 31.251421] bus_add_driver+0x111/0x1f0 [ 31.251445] driver_register+0x6e/0xc0 [ 31.251470] i2c_register_driver+0x41/0xb0 [ 31.251498] do_one_initcall+0x5e/0x3a0 [ 31.251522] do_init_module+0x60/0x220 [ 31.251550] __do_sys_init_module+0x15f/0x190 [ 31.251575] do_syscall_64+0x93/0x180 [ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.251629] -> #0 (&psy->extensions_sem){.+.+}-{4:4}: [ 31.251668] __lock_acquire+0x13ce/0x21c0 [ 31.251694] lock_acquire+0xcf/0x2e0 [ 31.251719] down_read+0x3e/0x170 [ 31.251741] power_supply_get_property.part.0+0x22/0x150 [ 31.251774] power_supply_update_leds+0x8d/0x230 [ 31.251804] power_supply_led_trigger_activate+0x18/0x20 [ 31.251837] led_trigger_set+0x1fc/0x300 [ 31.251863] led_trigger_set_default+0x90/0xe0 [ 31.251892] led_classdev_register_ext+0x311/0x3a0 [ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor] [ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x] [ 31.252002] i2c_device_probe+0x125/0x2b0 [ 31.252027] really_probe+0xde/0x340 [ 31.252052] __driver_probe_device+0x78/0x110 [ 31.252076] driver_probe_device+0x1f/0xa0 [ 31.252103] __driver_attach+0xba/0x1c0 [ 31.252125] bus_for_each_dev+0x6b/0xb0 [ 31.252148] bus_add_driver+0x111/0x1f0 [ 31.252172] driver_register+0x6e/0xc0 [ 31.252197] i2c_register_driver+0x41/0xb0 [ 31.252225] do_one_initcall+0x5e/0x3a0 [ 31.252248] do_init_module+0x60/0x220 [ 31.252274] __do_sys_init_module+0x15f/0x190 [ 31.253986] do_syscall_64+0x93/0x180 [ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.257614] other info that might help us debug this: [ 31.257619] Chain exists of: &psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock [ 31.257630] Possible unsafe locking scenario: [ 31.257632] CPU0 CPU1 [ 31.257633] ---- ---- [ 31.257634] lock(&led_cdev->trigger_lock); [ 31.257637] lock(triggers_list_lock); [ 31.257640] lock(&led_cdev->trigger_lock); [ 31.257643] rlock(&psy->extensions_sem); [ 31.257646] *** DEADLOCK *** [ 31.289433] 4 locks held by (udev-worker)/553: [ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0 [ 31.289463] Rust-for-Linux#1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0 [ 31.289476] Rust-for-Linux#2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0 [ 31.289487] Rust-for-Linux#3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 Fixes: 6037802 ("power: supply: core: implement extension API") Cc: Thomas Weißschuh <[email protected]> Cc: Armin Wolf <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>

…rary mm Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty Rust-for-Linux#3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. Because it is not in kernel address space it is not covered by KASAN shadow memory. Since commit e4137f0 ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports bad accesses from copy_to_kernel_nofault(). Here a bad access to user memory is reported because KASAN detects the lack of shadow memory and the address is below TASK_SIZE. Do like x86 in commit b3fd8e8 ("x86/alternatives: Use temporary mm for text poking") and disable KASAN reports during patching when using temporary mm. Reported-by: Erhard Furtner <[email protected]> Close: https://lore.kernel.org/all/20250201151435.48400261@yea/ Fixes: 465cabc ("powerpc/code-patching: introduce patch_instructions()") Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Michael Ellerman <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu

ojeda added the optional label Nov 28, 2020

ojeda added the • misc Related to other topics (e.g. CI). label Jan 21, 2021

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Moonshots #3

Moonshots #3

ojeda commented Aug 28, 2020