RISC-V: Add support to build the ACPI core

Enable ACPI core for RISC-V after adding architecture-specific
interfaces and header files required to build the ACPI core.

1) Couple of header files are required unconditionally by the ACPI
core. Add empty acenv.h and cpu.h header files.

2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
be provided by the architecture. Define dummy interfaces for now
so that build succeeds. Actual implementation will be added when
PCI support is added for ACPI along with external interrupt
controller support.

3) A few globals and memory mapping related functions specific
to the architecture need to be provided.

Signed-off-by: Sunil V L <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>

arch/riscv/Kconfig

@@ -12,6 +12,8 @@ config 32BIT
 
 config RISCV
 	def_bool y
+	select ACPI_GENERIC_GSI if ACPI
+	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
 	select ARCH_DMA_DEFAULT_COHERENT
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
@@ -707,6 +709,7 @@ config EFI
 	depends on OF && !XIP_KERNEL
 	depends on MMU
 	default y
+	select ARCH_SUPPORTS_ACPI if 64BIT
 	select EFI_GENERIC_STUB
 	select EFI_PARAMS_FROM_FDT
 	select EFI_RUNTIME_WRAPPERS
@@ -816,3 +819,5 @@ source "drivers/cpufreq/Kconfig"
 endmenu # "CPU Power Management"
 
 source "arch/riscv/kvm/Kconfig"
+
+source "drivers/acpi/Kconfig"

arch/riscv/include/asm/acenv.h

@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * RISC-V specific ACPICA environments and implementation
+ */
+
+#ifndef _ASM_ACENV_H
+#define _ASM_ACENV_H
+
+/* This header is required unconditionally by the ACPI core */
+
+#endif /* _ASM_ACENV_H */

arch/riscv/include/asm/acpi.h

@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (C) 2013-2014, Linaro Ltd.
+ *	Author: Al Stone <[email protected]>
+ *	Author: Graeme Gregory <[email protected]>
+ *	Author: Hanjun Guo <[email protected]>
+ *
+ *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
+ *	Author: Sunil V L <[email protected]>
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+/* Basic configuration for ACPI */
+#ifdef CONFIG_ACPI
+
+/* ACPI table mapping after acpi_permanent_mmap is set */
+void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
+#define acpi_os_ioremap acpi_os_ioremap
+
+#define acpi_strict 1	/* No out-of-spec workarounds on RISC-V */
+extern int acpi_disabled;
+extern int acpi_noirq;
+extern int acpi_pci_disabled;
+
+static inline void disable_acpi(void)
+{
+	acpi_disabled = 1;
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
+
+static inline void enable_acpi(void)
+{
+	acpi_disabled = 0;
+	acpi_pci_disabled = 0;
+	acpi_noirq = 0;
+}
+
+/*
+ * The ACPI processor driver for ACPI core code needs this macro
+ * to find out whether this cpu was already mapped (mapping from CPU hardware
+ * ID to CPU logical ID) or not.
+ */
+#define cpu_physical_id(cpu) cpuid_to_hartid_map(cpu)
+
+/*
+ * Since MADT must provide at least one RINTC structure, the
+ * CPU will be always available in MADT on RISC-V.
+ */
+static inline bool acpi_has_cpu_in_madt(void)
+{
+	return true;
+}
+
+static inline void arch_fix_phys_package_id(int num, u32 slot) { }
+
+#endif /* CONFIG_ACPI */
+
+#endif /*_ASM_ACPI_H*/

arch/riscv/include/asm/cpu.h

@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_CPU_H
+#define _ASM_CPU_H
+
+/* This header is required unconditionally by the ACPI core */
+
+#endif /* _ASM_CPU_H */

arch/riscv/kernel/Makefile

@@ -92,3 +92,4 @@ obj-$(CONFIG_COMPAT)		+= compat_signal.o
 obj-$(CONFIG_COMPAT)		+= compat_vdso/
 
 obj-$(CONFIG_64BIT)		+= pi/
+obj-$(CONFIG_ACPI)		+= acpi.o

arch/riscv/kernel/acpi.c

@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  RISC-V Specific Low-Level ACPI Boot Support
+ *
+ *  Copyright (C) 2013-2014, Linaro Ltd.
+ *	Author: Al Stone <[email protected]>
+ *	Author: Graeme Gregory <[email protected]>
+ *	Author: Hanjun Guo <[email protected]>
+ *	Author: Tomasz Nowicki <[email protected]>
+ *	Author: Naresh Bhat <[email protected]>
+ *
+ *  Copyright (C) 2021-2023, Ventana Micro Systems Inc.
+ *	Author: Sunil V L <[email protected]>
+ */
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+
+int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
+int acpi_disabled = 1;
+EXPORT_SYMBOL(acpi_disabled);
+
+int acpi_pci_disabled = 1;	/* skip ACPI PCI scan and IRQ initialization */
+EXPORT_SYMBOL(acpi_pci_disabled);
+
+/*
+ * __acpi_map_table() will be called before paging_init(), so early_ioremap()
+ * or early_memremap() should be called here to for ACPI table mapping.
+ */
+void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+	if (!size)
+		return NULL;
+
+	return early_memremap(phys, size);
+}
+
+void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
+{
+	if (!map || !size)
+		return;
+
+	early_memunmap(map, size);
+}
+
+void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
+{
+	return memremap(phys, size, MEMREMAP_WB);
+}
+
+#ifdef CONFIG_PCI
+
+/*
+ * These interfaces are defined just to enable building ACPI core.
+ * TODO: Update it with actual implementation when external interrupt
+ * controller support is added in RISC-V ACPI.
+ */
+int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
+		 int reg, int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
+		  int reg, int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+	return -1;
+}
+
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+	return NULL;
+}
+#endif	/* CONFIG_PCI */