tests: added test app for the at86rf2xx driver

tests/driver_at86rf2xx/Makefile

@@ -0,0 +1,81 @@
+APPLICATION = driver_at86rf2xx
+include ../Makefile.tests_common
+
+FEATURES_REQUIRED = periph_spi periph_gpio
+
+BOARD_INSUFFICIENT_RAM := stm32f0discovery
+BOARD_BLACKLIST        := nucleo-f334
+# nucleo-f334:  not enough GPIO pins defined
+
+ifneq (,$(filter saml21-xpro,$(BOARD)))
+  DRIVER ?= ng_at86rf212b
+  export ATRF_SPI ?= SPI_0
+  export ATRF_CS ?= EXT1_SPI_SS
+  export ATRF_INT ?= EXT1_P09
+  export ATRF_RESET ?= EXT1_P07
+  export ATRF_SLEEP ?= EXT1_P10
+  export ATRF_SPI_SPEED ?= SPI_SPEED_1MHZ
+endif
+ifneq (,$(filter iot-lab_M3,$(BOARD)))
+  DRIVER ?= ng_at86rf231
+  export ATRF_SPI ?= SPI_0
+  export ATRF_CS ?= GPIO_11
+  export ATRF_INT ?= GPIO_12
+  export ATRF_RESET ?= GPIO_13
+  export ATRF_SLEEP ?= GPIO_14
+endif
+ifneq (,$(filter samr21-xpro,$(BOARD)))
+  DRIVER ?= ng_at86rf233
+  export ATRF_SPI ?= SPI_0
+  export ATRF_CS ?= GPIO_4
+  export ATRF_INT ?= GPIO_5
+  export ATRF_RESET ?= GPIO_6
+  export ATRF_SLEEP ?= GPIO_7
+  export ATRF_SPI_SPEED ?= SPI_SPEED_1MHZ
+endif
+
+ifneq (,$(DRIVER))
+  USEMODULE += $(DRIVER)
+else
+  USEMODULE += ng_at86rf231         # default to ng_at86rf231
+endif
+USEMODULE += ng_netbase
+USEMODULE += ng_nomac
+USEMODULE += ng_pktdump
+USEMODULE += uart0
+USEMODULE += shell
+USEMODULE += shell_commands
+USEMODULE += ps
+
+CFLAGS += -DDEVELHELP
+
+ifneq (,$(ATRF_SPI))
+  CFLAGS += -DATRF_SPI=$(ATRF_SPI)
+else
+  CFLAGS += -DATRF_SPI=SPI_0        # set default
+endif
+ifneq (,$(ATRF_CS))
+  CFLAGS += -DATRF_CS=$(ATRF_CS)
+else
+  CFLAGS += -DATRF_CS=GPIO_0        # set default
+endif
+ifneq (,$(ATRF_INT))
+  CFLAGS += -DATRF_INT=$(ATRF_INT)
+else
+  CFLAGS += -DATRF_INT=GPIO_1        # set default
+endif
+ifneq (,$(ATRF_SLEEP))
+  CFLAGS += -DATRF_SLEEP=$(ATRF_SLEEP)
+else
+  CFLAGS += -DATRF_SLEEP=GPIO_2        # set default
+endif
+ifneq (,$(ATRF_RESET))
+  CFLAGS += -DATRF_RESET=$(ATRF_RESET)
+else
+  CFLAGS += -DATRF_RESET=GPIO_3        # set default
+endif
+ifneq (,$(ATRF_SPI_SPEED))
+  CFLAGS += -DATRF_SPI_SPEED=$(ATRF_SPI_SPEED)
+endif
+
+include $(RIOTBASE)/Makefile.include

tests/driver_at86rf2xx/README.md

@@ -0,0 +1,16 @@
+# About
+This is a manual test application for the AT86RF2xx radio driver
+
+For running this test, you need to connect/configure the following pins of your
+radio device:
+- SPI MISO
+- SPI MOSI
+- SPI CLK
+- CS (ship select)
+- RESET
+- SLEEP
+- INT (external interrupt)
+
+# Usage
+For testing the radio driver you can use the netif and txtsnd shell commands
+that are included in this application.

tests/driver_at86rf2xx/main.c

@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2015 Freie Universität Berlin
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License v2.1. See the file LICENSE in the top level
+ * directory for more details.
+ */
+
+/**
+ * @ingroup     tests
+ * @{
+ *
+ * @file
+ * @brief       Test application for AT86RF2xx network device driver
+ *
+ * @author      Hauke Petersen <[email protected]>
+ *
+ * @}
+ */
+
+#include <stdio.h>
+
+#include "board.h"
+#include "kernel.h"
+#include "shell.h"
+#include "shell_commands.h"
+#include "posix_io.h"
+#include "board_uart0.h"
+#include "ng_at86rf2xx.h"
+#include "net/ng_netbase.h"
+#include "net/ng_nomac.h"
+#include "net/ng_pktdump.h"
+
+/* make sure the SPI port and the needed GPIO pins are defined */
+#ifndef ATRF_SPI
+#error "SPI not defined"
+#endif
+#ifndef ATRF_CS
+#error "Chip select pin not defined"
+#endif
+#ifndef ATRF_INT
+#error "Interrupt pin not defined"
+#endif
+#ifndef ATRF_SLEEP
+#error "Sleep pin not defined"
+#endif
+#ifndef ATRF_RESET
+#error "Reset pin not defined"
+#endif
+#ifndef ATRF_SPI_SPEED
+#define ATRF_SPI_SPEED          (SPI_SPEED_5MHZ)
+#endif
+
+/**
+ * @brief   Buffer size used by the shell
+ */
+#define SHELL_BUFSIZE           (64U)
+
+/**
+ * @brief   Allocate the AT86RF2xx device descriptor
+ */
+static ng_at86rf2xx_t dev;
+
+/**
+ * @brief   Stack for the nomac thread
+ */
+static char nomac_stack[KERNEL_CONF_STACKSIZE_MAIN];
+
+/**
+ * @brief   Read chars from STDIO
+ */
+int shell_read(void)
+{
+    char c = 0;
+    (void) posix_read(uart0_handler_pid, &c, 1);
+    return c;
+}
+
+/**
+ * @brief   Write chars to STDIO
+ */
+void shell_put(int c)
+{
+    putchar((char)c);
+}
+
+/**
+ * @brief   Maybe you are a golfer?!
+ */
+int main(void)
+{
+    kernel_pid_t iface;
+    int res;
+    shell_t shell;
+    ng_netreg_entry_t dump;
+
+    puts("AT86RF2xx device driver test");
+    printf("Initializing the radio at SPI_%i... \n", ATRF_SPI);
+
+    /* register the pktdump thread */
+    puts("Register the packet dump thread for NG_NETTYPE_UNDEF packets");
+    dump.pid = ng_pktdump_getpid();
+    dump.demux_ctx = NG_NETREG_DEMUX_CTX_ALL;
+    ng_netreg_register(NG_NETTYPE_UNDEF, &dump);
+
+    /* initialize the AT86RF2xx device */
+    puts("Initialize the AT86RF2xx radio device");
+    res = ng_at86rf2xx_init(&dev, ATRF_SPI, ATRF_SPI_SPEED,
+                            ATRF_CS, ATRF_INT,
+                            ATRF_SLEEP, ATRF_RESET);
+    if (res < 0) {
+        puts("Error initializing AT86RF2xx radio device");
+        return -1;
+    }
+
+    /* start MAC layer */
+    puts("Starting the NOMAC layer on top of the driver");
+    iface = ng_nomac_init(nomac_stack, sizeof(nomac_stack), PRIORITY_MAIN - 3,
+                          "at86rf2xx", (ng_netdev_t *)&dev);
+    if (iface <= KERNEL_PID_UNDEF) {
+        puts("Error initializing MAC layer");
+        return -1;
+    }
+
+    /* start the shell */
+    puts("Initialization successful - starting the shell now");
+    (void) posix_open(uart0_handler_pid, 0);
+    shell_init(&shell, NULL, SHELL_BUFSIZE, shell_read, shell_put);
+    shell_run(&shell);
+
+    return 0;
+}