Fix qiskit main integration tests cron job #1379
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
kt474
changed the title
Pull Request Test Coverage Report for Build 7791062417Warning: This coverage report may be inaccurate.We've detected an issue with your CI configuration that might affect the accuracy of this pull request's coverage report.
💛 - Coveralls |
kt474
added a commit
that referenced
this pull request
Feb 7, 2024
* Migrate fake backends from `qiskit.providers.fake_provider` (#1140) * Migrate fake provider * fix lint * Only migrate backends and fake_provider file to minimize duplication * Add reno * Update snippet to use runtime service --------- Co-authored-by: Kevin Tian <[email protected]> * Fix BYOB job results bytes typing issue (#1220) * try/except raw result truncation * catch typeError * revert try/except, use response.text * update unit test * Fix fake backends integration test (#1225) * Clean up/fix integration test * Update test case * Fix black * Added deprecation warning when using qiskitrc file (#1219) * Added deprecation warning when using qiskitrc file * Fixed bug whereby deprecation warnings cause failure for all 'qiskit*' modules. Changed warning to deprecation warning. * Release note * Small grammer fix * black --------- Co-authored-by: Kevin Tian <[email protected]> * Update session.from_id() (#1163) * update session.from_id() * add deprecation warning * add reno * Prepare release 0.15.0 (#1226) * Update main branch 0.16.0 (#1227) * Revert `Session.from_id 0.15.0` changes (#1229) * Revert "Update session.from_id() (#1163)" This reverts commit 8fa0472. * add reno * Prepare release 0.15.1 (#1230) * Update main branch to 0.16.0 again (#1232) * Remove all code related to custom programs (#1192) * initial removal * cleanup more files * move result_decoder * fix lint * update unit tests * update integration tests * more docs changes * release note * fix path --------- Co-authored-by: Jessie Yu <[email protected]> * Make sessions thread safe (#1196) * Make sessions thread safe. The lock prevents other threads from sending new jobs to the service only if the session hasnot been setup yet. I.e.: when sending the first "session starter job", or root job. After this happens, the code is left unlocked to allow threads to access the service concurrently. Error handling is needed to ensure the lock is always released. * Allow multiple sessions to execute simultaneously * Make session test more deterministic --------- Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Jessie Yu <[email protected]> * Instance & channel_strategy validation (#1233) * compare cloud instance with channel strategy * fix unit tests * error wording --------- Co-authored-by: Jessie Yu <[email protected]> * Prepare release 0.16.1 (#1239) * release notes * fix release * update to 0.17 (#1240) * Stop referring to qiskit.org in API docs (#1242) * Add job.properties() method (#1252) * Add job.properties() method * add reno * Remove non-API docs and translations (#1256) This is the same as Qiskit/qiskit#11352. Now that qiskit.org/ecosystem/ibm-runtime redirects to docs.quantum.ibm.com, we can simplify the docs. See the PR description in Qiskit/qiskit#11352 for details on the motivation for each change. The only difference from Qiskit is that we still keep the tutorials around because learning.quantum.ibm.com uses them. I used a script with `ripgrep` to confirm that none of the images were in use. * Raise error if backend retrieved not in current instance (#1249) * Error if backend not in instance * add reno * update reno * docs build * fix docs again * docs formatting :/ * add integration test * Update test/integration/test_backend.py Co-authored-by: merav-aharoni <[email protected]> * Update test/integration/test_backend.py Co-authored-by: merav-aharoni <[email protected]> --------- Co-authored-by: merav-aharoni <[email protected]> * Fix backend_converter `faulty_qubit` name error (#1257) * fix backend_converter * add reno * Update Tutorial section names (#1241) * The transpilation tutorial has been updated to use the new runtime transpilation passes, and Batch * Fix style checker * Updated names * Updated section names for transpiled tutorial * Updated grover * Fixed consistency * Final updates --------- Co-authored-by: Kevin Tian <[email protected]> * make test_backend_wrong_instance IQP only (#1258) * Add pointer to qiskit/documentation issues (#1260) * add pointer to qiskit/documentation issues * Update .github/ISSUE_TEMPLATE/config.yml Co-authored-by: Eric Arellano <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Eric Arellano <[email protected]> --------- Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Eric Arellano <[email protected]> * Update `test_backend_wrong_instance` (#1259) * wip debug wrong instance test * enable integration test * use backend names instead of obj * Don't block for the first job in a session (#1170) * don't block if backend not selected * add reno * add test * Add `activated_at` field to session.details() (#1266) * add activated_at to session.details() * add reno * Revert "Don't block for the first job in a session (#1170)" (#1267) * Revert "Don't block for the first job in a session (#1170)" This reverts commit f2e24e4. * keep test * Prepare release 0.17.0 (#1268) * update main branch 0.17.1 (#1269) * Remove test_session_no_backend (#1272) * Added RuntimeJob.queue_info() method (#1210) * Added support for RuntimeJob.queueinfo * Moved methods for consistency with main * Changed backend_status to job.status * lint * update test --------- Co-authored-by: Kevin Tian <[email protected]> * Replace programs with primitives in api docs (#1281) * programs -> primitives * address comment * Deprecate service.runtime (#1278) * Deprecate service.runtime * add reno * Removed support for qiskitrc file (#1121) * Removed support for qiskitrc file * lint --------- Co-authored-by: Kevin Tian <[email protected]> * Add max_time parameter to IBMBackend.open_session() (#1274) * Added max_time to IBMBackend.open_session. * Release note * Changed format of test * Migrate fake backend base classes (#1270) Co-authored-by: Kevin Tian <[email protected]> * Add Q-CTRL integration tests (#1173) * add initial qctrl test file * add test & decorator * add tests from Mirko * Added assertness for preciseness of results * remove print statements * move into e2e folder * setup ci * Update q-ctrl-tests.yml * add account test * add more account tests * Update test/qctrl/test_qctrl.py Co-authored-by: Rathish Cholarajan <[email protected]> * address comments * update date to 2023 * Update test/qctrl/test_qctrl.py Co-authored-by: Blake Johnson <[email protected]> * Update test/qctrl/test_qctrl.py Co-authored-by: Blake Johnson <[email protected]> --------- Co-authored-by: merav-aharoni <[email protected]> Co-authored-by: Rathish Cholarajan <[email protected]> Co-authored-by: Blake Johnson <[email protected]> * update grover tutorial equation (#1293) * Add dynamic circuits backend filter (#1291) * Add dynamic circuits backend filter * add reno * switch docs from mathjax to katex (#1301) Updates the sphinx documentation build to use KaTeX instead of MathJax because the final docs build uses KaTeX. The same change was made in Qiskit in Qiskit/qiskit#11435. * Remove qiskit.org links (#1302) * Update session_id docstring (#1304) * Update provider and qiskit versions (#1305) * Exclude params on job retrieval by default (#1308) * exclude params on job retrieval by default * add reno * add test * Reactive the viewcode extension for docs (#1312) We got source links working in API docs on docs.quantum.ibm.com! See Qiskit/documentation#620. To do this, we need to active `sphinx.ext.viewcode`. Note that we still plan to improve this implementation in the future to have more precise links by using `sphinx.ext.linkcode`, tracked by Qiskit/documentation#517. This PR is to unblock the first iteration of this source links mechanism. * Add config files to manifest (#1319) * Fix pip environment resolution (#1329) Calling `pip install` multiple times can (deeply unfortunately) allow an environment to become out-of-sync; `pip` doesn't "remember" the constraints of previous installation commands. One of the largest effects here is that doing `pip install -e .` _followed_ by `pip install git+<qiskit>@main` installs `qiskit-terra` from the initial installation (via `qiskit==0.45.2`), then installs `qiskit==1.0.0.dev0` from Git, which is an incompatible environment. Doing the whole environment resolution in a single `pip install` command fixes this, as the `qiskit` dependency is correctly resolved to be _only_ the `1.0.0.dev0` version. Co-authored-by: Kevin Tian <[email protected]> * Use IBM-Provider-vendored pub/sub mechanism (#1328) This is being removed from Qiskit 1.0, and the IBM Provider is (until deprecated) taking over brokering the IBM-Runtime-internal events. Co-authored-by: Kevin Tian <[email protected]> * Add transpiler tests (#1323) * Add transpiler tests * remove qiskittestcase * Prepare release 0.18.0 (#1335) * Update main branch 0.18.1 (#1336) * Turn off qiskit.org docs deploy (#1340) * Remove `qiskit.test` (#1292) * replace qiskit.test.ReferenceCircuits * replace BaseQiskitTest * Update qiskit_ibm_runtime/qiskit_runtime_service.py Co-authored-by: Jessie Yu <[email protected]> * Update qiskit_ibm_runtime/sampler.py Co-authored-by: Jessie Yu <[email protected]> * Update qiskit_ibm_runtime/session.py Co-authored-by: Jessie Yu <[email protected]> * Update test/utils.py Co-authored-by: Jessie Yu <[email protected]> --------- Co-authored-by: Jessie Yu <[email protected]> * Add missing API Refs to docs (#1343) ### Summary The documentation from the `transpile` and `fake_provider` modules does not appear in the rendered docs in qiskit.org/documentation or docs.quantum-computing.ibm.com. ### Details and comments Fixes [Qiskit Docs Issue #238](Qiskit/documentation#238) Replaces PR #1330. Transpiler Doc files added: - qiskit_ibm_runtime.transpiler.passes.html - qiskit_ibm_provider.transpiler.passes.basis.html - qiskit_ibm_provider.transpiler.passes.scheduling.ALAPScheduleAnalysis.html - qiskit_ibm_provider.transpiler.passes.scheduling.ASAPScheduleAnalysis.html - qiskit_ibm_provider.transpiler.passes.scheduling.BlockBasePadder.html - qiskit_ibm_provider.transpiler.passes.scheduling.DynamicCircuitInstructionDurations.html - qiskit_ibm_provider.transpiler.passes.scheduling.html - qiskit_ibm_provider.transpiler.passes.scheduling.PadDelay.html - qiskit_ibm_provider.transpiler.passes.scheduling.PadDynamicalDecoupling.html <details> <summary> Fake Provider Docs added: </summary> - qiskit_ibm_runtime.fake_provider.FakeAlmaden.html - qiskit_ibm_runtime.fake_provider.FakeAlmadenV2.html - qiskit_ibm_runtime.fake_provider.FakeArmonk.html - qiskit_ibm_runtime.fake_provider.FakeArmonkV2.html - qiskit_ibm_runtime.fake_provider.FakeAthens.html - qiskit_ibm_runtime.fake_provider.FakeAthensV2.html - qiskit_ibm_runtime.fake_provider.FakeAuckland.html - qiskit_ibm_runtime.fake_provider.FakeBelem.html - qiskit_ibm_runtime.fake_provider.FakeBelemV2.html - qiskit_ibm_runtime.fake_provider.FakeBoeblingen.html - qiskit_ibm_runtime.fake_provider.FakeBoeblingenV2.html - qiskit_ibm_runtime.fake_provider.FakeBogota.html - qiskit_ibm_runtime.fake_provider.FakeBogotaV2.html - qiskit_ibm_runtime.fake_provider.FakeBrooklyn.html - qiskit_ibm_runtime.fake_provider.FakeBrooklynV2.html - qiskit_ibm_runtime.fake_provider.FakeBurlington.html - qiskit_ibm_runtime.fake_provider.FakeBurlingtonV2.html - qiskit_ibm_runtime.fake_provider.FakeCairo.html - qiskit_ibm_runtime.fake_provider.FakeCairoV2.html - qiskit_ibm_runtime.fake_provider.FakeCambridge.html - qiskit_ibm_runtime.fake_provider.FakeCambridgeV2.html - qiskit_ibm_runtime.fake_provider.FakeCasablanca.html - qiskit_ibm_runtime.fake_provider.FakeCasablancaV2.html - qiskit_ibm_runtime.fake_provider.FakeEssex.html - qiskit_ibm_runtime.fake_provider.FakeEssexV2.html - qiskit_ibm_runtime.fake_provider.FakeGeneva.html - qiskit_ibm_runtime.fake_provider.FakeGuadalupe.html - qiskit_ibm_runtime.fake_provider.FakeGuadalupeV2.html - qiskit_ibm_runtime.fake_provider.FakeHanoi.html - qiskit_ibm_runtime.fake_provider.FakeHanoiV2.html - qiskit_ibm_runtime.fake_provider.FakeJakarta.html - qiskit_ibm_runtime.fake_provider.FakeJakartaV2.html - qiskit_ibm_runtime.fake_provider.FakeJohannesburg.html - qiskit_ibm_runtime.fake_provider.FakeJohannesburgV2.html - qiskit_ibm_runtime.fake_provider.FakeKolkata.html - qiskit_ibm_runtime.fake_provider.FakeKolkataV2.html - qiskit_ibm_runtime.fake_provider.FakeLagos.html - qiskit_ibm_runtime.fake_provider.FakeLagosV2.html - qiskit_ibm_runtime.fake_provider.FakeLima.html - qiskit_ibm_runtime.fake_provider.FakeLimaV2.html - qiskit_ibm_runtime.fake_provider.FakeLondon.html - qiskit_ibm_runtime.fake_provider.FakeLondonV2.html - qiskit_ibm_runtime.fake_provider.FakeManhattan.html - qiskit_ibm_runtime.fake_provider.FakeManhattanV2.html - qiskit_ibm_runtime.fake_provider.FakeManila.html - qiskit_ibm_runtime.fake_provider.FakeManilaV2.html - qiskit_ibm_runtime.fake_provider.FakeMelbourne.html - qiskit_ibm_runtime.fake_provider.FakeMelbourneV2.html - qiskit_ibm_runtime.fake_provider.FakeMontreal.html - qiskit_ibm_runtime.fake_provider.FakeMontrealV2.html - qiskit_ibm_runtime.fake_provider.FakeMumbai.html - qiskit_ibm_runtime.fake_provider.FakeMumbaiV2.html - qiskit_ibm_runtime.fake_provider.FakeNairobi.html - qiskit_ibm_runtime.fake_provider.FakeNairobiV2.html - qiskit_ibm_runtime.fake_provider.FakeOslo.html - qiskit_ibm_runtime.fake_provider.FakeOurense.html - qiskit_ibm_runtime.fake_provider.FakeOurenseV2.html - qiskit_ibm_runtime.fake_provider.FakeParis.html - qiskit_ibm_runtime.fake_provider.FakeParisV2.html - qiskit_ibm_runtime.fake_provider.FakePerth.html - qiskit_ibm_runtime.fake_provider.FakePoughkeepsie.html - qiskit_ibm_runtime.fake_provider.FakePoughkeepsieV2.html - qiskit_ibm_runtime.fake_provider.FakePrague.html - qiskit_ibm_runtime.fake_provider.FakeProviderForBackendV2.html - qiskit_ibm_runtime.fake_provider.FakeProvider.html - qiskit_ibm_runtime.fake_provider.FakeQuito.html - qiskit_ibm_runtime.fake_provider.FakeQuitoV2.html - qiskit_ibm_runtime.fake_provider.FakeRochester.html - qiskit_ibm_runtime.fake_provider.FakeRochesterV2.html - qiskit_ibm_runtime.fake_provider.FakeRome.html - qiskit_ibm_runtime.fake_provider.FakeRomeV2.html - qiskit_ibm_runtime.fake_provider.FakeRueschlikon.html - qiskit_ibm_runtime.fake_provider.FakeSantiago.html - qiskit_ibm_runtime.fake_provider.FakeSantiagoV2.html - qiskit_ibm_runtime.fake_provider.FakeSherbrooke.html - qiskit_ibm_runtime.fake_provider.FakeSingapore.html - qiskit_ibm_runtime.fake_provider.FakeSingaporeV2.html - qiskit_ibm_runtime.fake_provider.FakeSydney.html - qiskit_ibm_runtime.fake_provider.FakeSydneyV2.html - qiskit_ibm_runtime.fake_provider.FakeTenerife.html - qiskit_ibm_runtime.fake_provider.FakeTokyo.html - qiskit_ibm_runtime.fake_provider.FakeToronto.html - qiskit_ibm_runtime.fake_provider.FakeTorontoV2.html - qiskit_ibm_runtime.fake_provider.FakeValencia.html - qiskit_ibm_runtime.fake_provider.FakeValenciaV2.html - qiskit_ibm_runtime.fake_provider.FakeVigo.html - qiskit_ibm_runtime.fake_provider.FakeVigoV2.html - qiskit_ibm_runtime.fake_provider.FakeWashington.html - qiskit_ibm_runtime.fake_provider.FakeWashingtonV2.html - qiskit_ibm_runtime.fake_provider.FakeYorktown.html - qiskit_ibm_runtime.fake_provider.FakeYorktownV2.html </details> Co-authored-by: Rebecca Dimock <[email protected]> * Set use_symengine on qpy generation if symengine is installed (#1355) This commit sets the use_symengine flag during qpy export used during job payload generation if symengine is installed. For qiskit <1.0 symengine is a hard dependency on platforms that have support for it (x86_64, aarch64, and ppc64le linux and macOS) and an optional requirement on other qiskit supported platforms, and when available it greatly improves the runtime performance of symbolic expressions in Qiskit. By default QPY opts for the more compatible sympy representation of an unbound ParameterExpression as it's maximally compatible, and means that no matter the environment the payload will be loaded from it will be able to parse the payload. In QPY version 10 a new flag was added to the payload definition that enables users to use a native binary symengine representation of a symbolic expression that is significantly faster to generate and parse, but it still defaults to sympy as using this flag limits the compatibility of the payload. However, for runtime job submission we know that the service always has symengine available so we should be using this flag for job submission if the local environment has symengine installed as it will greatly speed up the serialization of unbound ParameterExpression objects. In Qiskit 1.0, symengine is promoted to a hard requriment for all environments and use_symengine=True is the default in Qiskit's qpy module. But, setting it like this is still a good idea as it will always be safe to do this, it's just in qiskit 1.0 symengine will always be installed. * Fix for unit tests (#1356) * Run all unit tests * Import fake providers * Format * Fake providers not used in this branch * Unused import --------- Co-authored-by: Kevin Tian <[email protected]> * Update flaky integration tests (#1359) * Fix bad Sphinx API doc Provider naming (#1360) This resulted in the imports being called `qiskit_ibm_provider` rather than `qiskit_ibm_runtime`. Co-authored-by: Frank Harkins <[email protected]> * Merge qiskit-ibm-provider into qiskit-ibm-runtime (#1285) * initial commit * more replacements * more replacements * add auth/api * add reno * add qpy module back * address comments * fix docs build * Update invalid token test (#1367) * Copy pub/sub code into qiskit-ibm-runtime (#1349) * Copy pub/sub code into qiskit-ibm-runtime * fix docs build * Remove mthree from requirements-dev (#1370) * Handle Qiskit 1.0 removals (#1363) * Handle Qiskit 1.0 removals * Remove removed qiskit modules * add both qiskit synthesis imports * fix docs build * fix lint errors from 1.0.0RC1 * update basicaer import * Update qiskit_ibm_runtime/fake_provider/fake_backend.py Co-authored-by: Elena Peña Tapia <[email protected]> * address comments * Update imports & docstrings --------- Co-authored-by: Elena Peña Tapia <[email protected]> * Copy over provider session & remove qiskit-ibm-provider (#1368) * Move provider's session & remove qiskit-ibm-provider * fix black * Handle qpy serialization across versions and delete vendored fork (#1377) * Handle qpy serialization across versions and delete vendored fork For the next qiskit-ibm-runtime release it is desired to have it support both Qiskit 0.45.x/0.46.x and Qiskit 1.0.0. To do this with QPY it means we need to emit a fixed qpy version of 10 as that's currently the maximum version the server side can parse. The easiest way to manage this across versions is actually to rely on Qiskit's qpy module again. Starting in Qiskit 1.0.0 the qiskit.qpy.dump() function a new kwarg, version exists to specify the version of qpy emitted. We can use this to control the rollout of QPY format versions as the server side is updated. For right now this is fixed to version 10 which is the same as the QPY format version emitted by 0.45.x and 0.46.0. Because the versions are the same we can just use qiskit's qpy module moving forward as either we're on qiskit 0.45.x/0.46.x and will emit version 10 (as there is no option) or we're on >=1.0.0 and we explicitly set the qpy version to one that's compatible with the server side. The qpy internals usage to serialize parameters and parameter expressions are left in place (although expanded on to include #1355 for parameter expressions) as an alternative needs to be considered for this. It is not a good idea to rely on qpy internals and explicitly private functions to do partial serialization. This commit also deletes the vendored fork as it's never been included in a released version of qiskit-ibm-runtime and nothing is using it anymore. Related to: #1375 * Fix lint * Fix lint again * Run integration tests against Qiskit main (#1376) * Fix qiskit main integratino tests cron job (#1379) * Prepare release 0.19.0 (#1380) * Prepare release 0.19 * add reno stating compatibility * Update main branch version 0.19.1 (#1382) * Porting qiskit-ibm-provider/787: Fix `DynamicCircuitInstructionDurations.from_backend` for both `Backend versions` (#1383) * porting qiskit-ibm-provider/pull/787 * porting qiskit-ibm-provider/pull/787 * black * oops * monkey patch Qiskit/qiskit#11727 * black lynt * mypy --------- Co-authored-by: Kevin Tian <[email protected]> * Cast use_symengine input to a bool (#1385) * Cast use_symengine input to a bool This commit works around a bug in Qiskit 0.45.x, 0.46.0, and 1.0.0rc1 with the `use_symengine` flag on `qpy.dump()`. The dump function has a bug when it receives a truthy value instead of a bool literal that it will generate a corrupt qpy because of a mismatch between how the encoding was processed (the encoding is incorrectly set to sympy in the file header but uses symengine encoding in the actual body of the circuit. This is being fixed in Qiskit/qiskit#11730 for 1.0.0, and will be backported to 0.46.1. But to ensure compatibility with 0.45.x, 0.46.0, and 1.0.0rc1 while waiting for those releases we can workaround this by just casting the value to a boolean. * Fix mypy failures * Mypy fixes again * Prepare release 0.19.1 (#1386) * Update main branch version 0.19.2 (#1388) * fix import issues * more import issues * disable docs warning --------- Co-authored-by: Elena Peña Tapia <[email protected]> Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: merav-aharoni <[email protected]> Co-authored-by: Salvador de la Puente González <[email protected]> Co-authored-by: Eric Arellano <[email protected]> Co-authored-by: Sanket Panda <[email protected]> Co-authored-by: abbycross <[email protected]> Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Rathish Cholarajan <[email protected]> Co-authored-by: Blake Johnson <[email protected]> Co-authored-by: Kevin J. Sung <[email protected]> Co-authored-by: Jake Lishman <[email protected]> Co-authored-by: Kaelyn Ferris <[email protected]> Co-authored-by: Rebecca Dimock <[email protected]> Co-authored-by: Matthew Treinish <[email protected]> Co-authored-by: Diego Ristè <[email protected]> Co-authored-by: Frank Harkins <[email protected]> Co-authored-by: Luciano Bello <[email protected]>
jyu00
added a commit
that referenced
this pull request
Feb 27, 2024
* Migrate fake backends from `qiskit.providers.fake_provider` (#1140) * Migrate fake provider * fix lint * Only migrate backends and fake_provider file to minimize duplication * Add reno * Update snippet to use runtime service --------- Co-authored-by: Kevin Tian <[email protected]> * Fix BYOB job results bytes typing issue (#1220) * try/except raw result truncation * catch typeError * revert try/except, use response.text * update unit test * Fix fake backends integration test (#1225) * Clean up/fix integration test * Update test case * Fix black * Added deprecation warning when using qiskitrc file (#1219) * Added deprecation warning when using qiskitrc file * Fixed bug whereby deprecation warnings cause failure for all 'qiskit*' modules. Changed warning to deprecation warning. * Release note * Small grammer fix * black --------- Co-authored-by: Kevin Tian <[email protected]> * Update session.from_id() (#1163) * update session.from_id() * add deprecation warning * add reno * Prepare release 0.15.0 (#1226) * Update main branch 0.16.0 (#1227) * Revert `Session.from_id 0.15.0` changes (#1229) * Revert "Update session.from_id() (#1163)" This reverts commit 8fa0472. * add reno * Prepare release 0.15.1 (#1230) * Update main branch to 0.16.0 again (#1232) * Remove all code related to custom programs (#1192) * initial removal * cleanup more files * move result_decoder * fix lint * update unit tests * update integration tests * more docs changes * release note * fix path --------- Co-authored-by: Jessie Yu <[email protected]> * Make sessions thread safe (#1196) * Make sessions thread safe. The lock prevents other threads from sending new jobs to the service only if the session hasnot been setup yet. I.e.: when sending the first "session starter job", or root job. After this happens, the code is left unlocked to allow threads to access the service concurrently. Error handling is needed to ensure the lock is always released. * Allow multiple sessions to execute simultaneously * Make session test more deterministic --------- Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Jessie Yu <[email protected]> * Instance & channel_strategy validation (#1233) * compare cloud instance with channel strategy * fix unit tests * error wording --------- Co-authored-by: Jessie Yu <[email protected]> * Prepare release 0.16.1 (#1239) * release notes * fix release * update to 0.17 (#1240) * Stop referring to qiskit.org in API docs (#1242) * Add job.properties() method (#1252) * Add job.properties() method * add reno * Remove non-API docs and translations (#1256) This is the same as Qiskit/qiskit#11352. Now that qiskit.org/ecosystem/ibm-runtime redirects to docs.quantum.ibm.com, we can simplify the docs. See the PR description in Qiskit/qiskit#11352 for details on the motivation for each change. The only difference from Qiskit is that we still keep the tutorials around because learning.quantum.ibm.com uses them. I used a script with `ripgrep` to confirm that none of the images were in use. * Raise error if backend retrieved not in current instance (#1249) * Error if backend not in instance * add reno * update reno * docs build * fix docs again * docs formatting :/ * add integration test * Update test/integration/test_backend.py Co-authored-by: merav-aharoni <[email protected]> * Update test/integration/test_backend.py Co-authored-by: merav-aharoni <[email protected]> --------- Co-authored-by: merav-aharoni <[email protected]> * Fix backend_converter `faulty_qubit` name error (#1257) * fix backend_converter * add reno * Update Tutorial section names (#1241) * The transpilation tutorial has been updated to use the new runtime transpilation passes, and Batch * Fix style checker * Updated names * Updated section names for transpiled tutorial * Updated grover * Fixed consistency * Final updates --------- Co-authored-by: Kevin Tian <[email protected]> * make test_backend_wrong_instance IQP only (#1258) * Add pointer to qiskit/documentation issues (#1260) * add pointer to qiskit/documentation issues * Update .github/ISSUE_TEMPLATE/config.yml Co-authored-by: Eric Arellano <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Eric Arellano <[email protected]> --------- Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Eric Arellano <[email protected]> * Update `test_backend_wrong_instance` (#1259) * wip debug wrong instance test * enable integration test * use backend names instead of obj * Don't block for the first job in a session (#1170) * don't block if backend not selected * add reno * add test * Add `activated_at` field to session.details() (#1266) * add activated_at to session.details() * add reno * Revert "Don't block for the first job in a session (#1170)" (#1267) * Revert "Don't block for the first job in a session (#1170)" This reverts commit f2e24e4. * keep test * Prepare release 0.17.0 (#1268) * update main branch 0.17.1 (#1269) * Remove test_session_no_backend (#1272) * Added RuntimeJob.queue_info() method (#1210) * Added support for RuntimeJob.queueinfo * Moved methods for consistency with main * Changed backend_status to job.status * lint * update test --------- Co-authored-by: Kevin Tian <[email protected]> * Replace programs with primitives in api docs (#1281) * programs -> primitives * address comment * Deprecate service.runtime (#1278) * Deprecate service.runtime * add reno * Removed support for qiskitrc file (#1121) * Removed support for qiskitrc file * lint --------- Co-authored-by: Kevin Tian <[email protected]> * Add max_time parameter to IBMBackend.open_session() (#1274) * Added max_time to IBMBackend.open_session. * Release note * Changed format of test * Migrate fake backend base classes (#1270) Co-authored-by: Kevin Tian <[email protected]> * Add Q-CTRL integration tests (#1173) * add initial qctrl test file * add test & decorator * add tests from Mirko * Added assertness for preciseness of results * remove print statements * move into e2e folder * setup ci * Update q-ctrl-tests.yml * add account test * add more account tests * Update test/qctrl/test_qctrl.py Co-authored-by: Rathish Cholarajan <[email protected]> * address comments * update date to 2023 * Update test/qctrl/test_qctrl.py Co-authored-by: Blake Johnson <[email protected]> * Update test/qctrl/test_qctrl.py Co-authored-by: Blake Johnson <[email protected]> --------- Co-authored-by: merav-aharoni <[email protected]> Co-authored-by: Rathish Cholarajan <[email protected]> Co-authored-by: Blake Johnson <[email protected]> * update grover tutorial equation (#1293) * Add dynamic circuits backend filter (#1291) * Add dynamic circuits backend filter * add reno * switch docs from mathjax to katex (#1301) Updates the sphinx documentation build to use KaTeX instead of MathJax because the final docs build uses KaTeX. The same change was made in Qiskit in Qiskit/qiskit#11435. * Remove qiskit.org links (#1302) * Update session_id docstring (#1304) * Update provider and qiskit versions (#1305) * Exclude params on job retrieval by default (#1308) * exclude params on job retrieval by default * add reno * add test * Reactive the viewcode extension for docs (#1312) We got source links working in API docs on docs.quantum.ibm.com! See Qiskit/documentation#620. To do this, we need to active `sphinx.ext.viewcode`. Note that we still plan to improve this implementation in the future to have more precise links by using `sphinx.ext.linkcode`, tracked by Qiskit/documentation#517. This PR is to unblock the first iteration of this source links mechanism. * Add config files to manifest (#1319) * Fix pip environment resolution (#1329) Calling `pip install` multiple times can (deeply unfortunately) allow an environment to become out-of-sync; `pip` doesn't "remember" the constraints of previous installation commands. One of the largest effects here is that doing `pip install -e .` _followed_ by `pip install git+<qiskit>@main` installs `qiskit-terra` from the initial installation (via `qiskit==0.45.2`), then installs `qiskit==1.0.0.dev0` from Git, which is an incompatible environment. Doing the whole environment resolution in a single `pip install` command fixes this, as the `qiskit` dependency is correctly resolved to be _only_ the `1.0.0.dev0` version. Co-authored-by: Kevin Tian <[email protected]> * Use IBM-Provider-vendored pub/sub mechanism (#1328) This is being removed from Qiskit 1.0, and the IBM Provider is (until deprecated) taking over brokering the IBM-Runtime-internal events. Co-authored-by: Kevin Tian <[email protected]> * Add transpiler tests (#1323) * Add transpiler tests * remove qiskittestcase * Prepare release 0.18.0 (#1335) * Update main branch 0.18.1 (#1336) * Turn off qiskit.org docs deploy (#1340) * Remove `qiskit.test` (#1292) * replace qiskit.test.ReferenceCircuits * replace BaseQiskitTest * Update qiskit_ibm_runtime/qiskit_runtime_service.py Co-authored-by: Jessie Yu <[email protected]> * Update qiskit_ibm_runtime/sampler.py Co-authored-by: Jessie Yu <[email protected]> * Update qiskit_ibm_runtime/session.py Co-authored-by: Jessie Yu <[email protected]> * Update test/utils.py Co-authored-by: Jessie Yu <[email protected]> --------- Co-authored-by: Jessie Yu <[email protected]> * Add missing API Refs to docs (#1343) ### Summary The documentation from the `transpile` and `fake_provider` modules does not appear in the rendered docs in qiskit.org/documentation or docs.quantum-computing.ibm.com. ### Details and comments Fixes [Qiskit Docs Issue #238](Qiskit/documentation#238) Replaces PR #1330. Transpiler Doc files added: - qiskit_ibm_runtime.transpiler.passes.html - qiskit_ibm_provider.transpiler.passes.basis.html - qiskit_ibm_provider.transpiler.passes.scheduling.ALAPScheduleAnalysis.html - qiskit_ibm_provider.transpiler.passes.scheduling.ASAPScheduleAnalysis.html - qiskit_ibm_provider.transpiler.passes.scheduling.BlockBasePadder.html - qiskit_ibm_provider.transpiler.passes.scheduling.DynamicCircuitInstructionDurations.html - qiskit_ibm_provider.transpiler.passes.scheduling.html - qiskit_ibm_provider.transpiler.passes.scheduling.PadDelay.html - qiskit_ibm_provider.transpiler.passes.scheduling.PadDynamicalDecoupling.html <details> <summary> Fake Provider Docs added: </summary> - qiskit_ibm_runtime.fake_provider.FakeAlmaden.html - qiskit_ibm_runtime.fake_provider.FakeAlmadenV2.html - qiskit_ibm_runtime.fake_provider.FakeArmonk.html - qiskit_ibm_runtime.fake_provider.FakeArmonkV2.html - qiskit_ibm_runtime.fake_provider.FakeAthens.html - qiskit_ibm_runtime.fake_provider.FakeAthensV2.html - qiskit_ibm_runtime.fake_provider.FakeAuckland.html - qiskit_ibm_runtime.fake_provider.FakeBelem.html - qiskit_ibm_runtime.fake_provider.FakeBelemV2.html - qiskit_ibm_runtime.fake_provider.FakeBoeblingen.html - qiskit_ibm_runtime.fake_provider.FakeBoeblingenV2.html - qiskit_ibm_runtime.fake_provider.FakeBogota.html - qiskit_ibm_runtime.fake_provider.FakeBogotaV2.html - qiskit_ibm_runtime.fake_provider.FakeBrooklyn.html - qiskit_ibm_runtime.fake_provider.FakeBrooklynV2.html - qiskit_ibm_runtime.fake_provider.FakeBurlington.html - qiskit_ibm_runtime.fake_provider.FakeBurlingtonV2.html - qiskit_ibm_runtime.fake_provider.FakeCairo.html - qiskit_ibm_runtime.fake_provider.FakeCairoV2.html - qiskit_ibm_runtime.fake_provider.FakeCambridge.html - qiskit_ibm_runtime.fake_provider.FakeCambridgeV2.html - qiskit_ibm_runtime.fake_provider.FakeCasablanca.html - qiskit_ibm_runtime.fake_provider.FakeCasablancaV2.html - qiskit_ibm_runtime.fake_provider.FakeEssex.html - qiskit_ibm_runtime.fake_provider.FakeEssexV2.html - qiskit_ibm_runtime.fake_provider.FakeGeneva.html - qiskit_ibm_runtime.fake_provider.FakeGuadalupe.html - qiskit_ibm_runtime.fake_provider.FakeGuadalupeV2.html - qiskit_ibm_runtime.fake_provider.FakeHanoi.html - qiskit_ibm_runtime.fake_provider.FakeHanoiV2.html - qiskit_ibm_runtime.fake_provider.FakeJakarta.html - qiskit_ibm_runtime.fake_provider.FakeJakartaV2.html - qiskit_ibm_runtime.fake_provider.FakeJohannesburg.html - qiskit_ibm_runtime.fake_provider.FakeJohannesburgV2.html - qiskit_ibm_runtime.fake_provider.FakeKolkata.html - qiskit_ibm_runtime.fake_provider.FakeKolkataV2.html - qiskit_ibm_runtime.fake_provider.FakeLagos.html - qiskit_ibm_runtime.fake_provider.FakeLagosV2.html - qiskit_ibm_runtime.fake_provider.FakeLima.html - qiskit_ibm_runtime.fake_provider.FakeLimaV2.html - qiskit_ibm_runtime.fake_provider.FakeLondon.html - qiskit_ibm_runtime.fake_provider.FakeLondonV2.html - qiskit_ibm_runtime.fake_provider.FakeManhattan.html - qiskit_ibm_runtime.fake_provider.FakeManhattanV2.html - qiskit_ibm_runtime.fake_provider.FakeManila.html - qiskit_ibm_runtime.fake_provider.FakeManilaV2.html - qiskit_ibm_runtime.fake_provider.FakeMelbourne.html - qiskit_ibm_runtime.fake_provider.FakeMelbourneV2.html - qiskit_ibm_runtime.fake_provider.FakeMontreal.html - qiskit_ibm_runtime.fake_provider.FakeMontrealV2.html - qiskit_ibm_runtime.fake_provider.FakeMumbai.html - qiskit_ibm_runtime.fake_provider.FakeMumbaiV2.html - qiskit_ibm_runtime.fake_provider.FakeNairobi.html - qiskit_ibm_runtime.fake_provider.FakeNairobiV2.html - qiskit_ibm_runtime.fake_provider.FakeOslo.html - qiskit_ibm_runtime.fake_provider.FakeOurense.html - qiskit_ibm_runtime.fake_provider.FakeOurenseV2.html - qiskit_ibm_runtime.fake_provider.FakeParis.html - qiskit_ibm_runtime.fake_provider.FakeParisV2.html - qiskit_ibm_runtime.fake_provider.FakePerth.html - qiskit_ibm_runtime.fake_provider.FakePoughkeepsie.html - qiskit_ibm_runtime.fake_provider.FakePoughkeepsieV2.html - qiskit_ibm_runtime.fake_provider.FakePrague.html - qiskit_ibm_runtime.fake_provider.FakeProviderForBackendV2.html - qiskit_ibm_runtime.fake_provider.FakeProvider.html - qiskit_ibm_runtime.fake_provider.FakeQuito.html - qiskit_ibm_runtime.fake_provider.FakeQuitoV2.html - qiskit_ibm_runtime.fake_provider.FakeRochester.html - qiskit_ibm_runtime.fake_provider.FakeRochesterV2.html - qiskit_ibm_runtime.fake_provider.FakeRome.html - qiskit_ibm_runtime.fake_provider.FakeRomeV2.html - qiskit_ibm_runtime.fake_provider.FakeRueschlikon.html - qiskit_ibm_runtime.fake_provider.FakeSantiago.html - qiskit_ibm_runtime.fake_provider.FakeSantiagoV2.html - qiskit_ibm_runtime.fake_provider.FakeSherbrooke.html - qiskit_ibm_runtime.fake_provider.FakeSingapore.html - qiskit_ibm_runtime.fake_provider.FakeSingaporeV2.html - qiskit_ibm_runtime.fake_provider.FakeSydney.html - qiskit_ibm_runtime.fake_provider.FakeSydneyV2.html - qiskit_ibm_runtime.fake_provider.FakeTenerife.html - qiskit_ibm_runtime.fake_provider.FakeTokyo.html - qiskit_ibm_runtime.fake_provider.FakeToronto.html - qiskit_ibm_runtime.fake_provider.FakeTorontoV2.html - qiskit_ibm_runtime.fake_provider.FakeValencia.html - qiskit_ibm_runtime.fake_provider.FakeValenciaV2.html - qiskit_ibm_runtime.fake_provider.FakeVigo.html - qiskit_ibm_runtime.fake_provider.FakeVigoV2.html - qiskit_ibm_runtime.fake_provider.FakeWashington.html - qiskit_ibm_runtime.fake_provider.FakeWashingtonV2.html - qiskit_ibm_runtime.fake_provider.FakeYorktown.html - qiskit_ibm_runtime.fake_provider.FakeYorktownV2.html </details> Co-authored-by: Rebecca Dimock <[email protected]> * Set use_symengine on qpy generation if symengine is installed (#1355) This commit sets the use_symengine flag during qpy export used during job payload generation if symengine is installed. For qiskit <1.0 symengine is a hard dependency on platforms that have support for it (x86_64, aarch64, and ppc64le linux and macOS) and an optional requirement on other qiskit supported platforms, and when available it greatly improves the runtime performance of symbolic expressions in Qiskit. By default QPY opts for the more compatible sympy representation of an unbound ParameterExpression as it's maximally compatible, and means that no matter the environment the payload will be loaded from it will be able to parse the payload. In QPY version 10 a new flag was added to the payload definition that enables users to use a native binary symengine representation of a symbolic expression that is significantly faster to generate and parse, but it still defaults to sympy as using this flag limits the compatibility of the payload. However, for runtime job submission we know that the service always has symengine available so we should be using this flag for job submission if the local environment has symengine installed as it will greatly speed up the serialization of unbound ParameterExpression objects. In Qiskit 1.0, symengine is promoted to a hard requriment for all environments and use_symengine=True is the default in Qiskit's qpy module. But, setting it like this is still a good idea as it will always be safe to do this, it's just in qiskit 1.0 symengine will always be installed. * Fix for unit tests (#1356) * Run all unit tests * Import fake providers * Format * Fake providers not used in this branch * Unused import --------- Co-authored-by: Kevin Tian <[email protected]> * Update flaky integration tests (#1359) * Fix bad Sphinx API doc Provider naming (#1360) This resulted in the imports being called `qiskit_ibm_provider` rather than `qiskit_ibm_runtime`. Co-authored-by: Frank Harkins <[email protected]> * Merge qiskit-ibm-provider into qiskit-ibm-runtime (#1285) * initial commit * more replacements * more replacements * add auth/api * add reno * add qpy module back * address comments * fix docs build * Update invalid token test (#1367) * Copy pub/sub code into qiskit-ibm-runtime (#1349) * Copy pub/sub code into qiskit-ibm-runtime * fix docs build * Remove mthree from requirements-dev (#1370) * Handle Qiskit 1.0 removals (#1363) * Handle Qiskit 1.0 removals * Remove removed qiskit modules * add both qiskit synthesis imports * fix docs build * fix lint errors from 1.0.0RC1 * update basicaer import * Update qiskit_ibm_runtime/fake_provider/fake_backend.py Co-authored-by: Elena Peña Tapia <[email protected]> * address comments * Update imports & docstrings --------- Co-authored-by: Elena Peña Tapia <[email protected]> * Copy over provider session & remove qiskit-ibm-provider (#1368) * Move provider's session & remove qiskit-ibm-provider * fix black * Handle qpy serialization across versions and delete vendored fork (#1377) * Handle qpy serialization across versions and delete vendored fork For the next qiskit-ibm-runtime release it is desired to have it support both Qiskit 0.45.x/0.46.x and Qiskit 1.0.0. To do this with QPY it means we need to emit a fixed qpy version of 10 as that's currently the maximum version the server side can parse. The easiest way to manage this across versions is actually to rely on Qiskit's qpy module again. Starting in Qiskit 1.0.0 the qiskit.qpy.dump() function a new kwarg, version exists to specify the version of qpy emitted. We can use this to control the rollout of QPY format versions as the server side is updated. For right now this is fixed to version 10 which is the same as the QPY format version emitted by 0.45.x and 0.46.0. Because the versions are the same we can just use qiskit's qpy module moving forward as either we're on qiskit 0.45.x/0.46.x and will emit version 10 (as there is no option) or we're on >=1.0.0 and we explicitly set the qpy version to one that's compatible with the server side. The qpy internals usage to serialize parameters and parameter expressions are left in place (although expanded on to include #1355 for parameter expressions) as an alternative needs to be considered for this. It is not a good idea to rely on qpy internals and explicitly private functions to do partial serialization. This commit also deletes the vendored fork as it's never been included in a released version of qiskit-ibm-runtime and nothing is using it anymore. Related to: #1375 * Fix lint * Fix lint again * Run integration tests against Qiskit main (#1376) * Fix qiskit main integratino tests cron job (#1379) * Prepare release 0.19.0 (#1380) * Prepare release 0.19 * add reno stating compatibility * Update main branch version 0.19.1 (#1382) * Porting qiskit-ibm-provider/787: Fix `DynamicCircuitInstructionDurations.from_backend` for both `Backend versions` (#1383) * porting qiskit-ibm-provider/pull/787 * porting qiskit-ibm-provider/pull/787 * black * oops * monkey patch Qiskit/qiskit#11727 * black lynt * mypy --------- Co-authored-by: Kevin Tian <[email protected]> * Cast use_symengine input to a bool (#1385) * Cast use_symengine input to a bool This commit works around a bug in Qiskit 0.45.x, 0.46.0, and 1.0.0rc1 with the `use_symengine` flag on `qpy.dump()`. The dump function has a bug when it receives a truthy value instead of a bool literal that it will generate a corrupt qpy because of a mismatch between how the encoding was processed (the encoding is incorrectly set to sympy in the file header but uses symengine encoding in the actual body of the circuit. This is being fixed in Qiskit/qiskit#11730 for 1.0.0, and will be backported to 0.46.1. But to ensure compatibility with 0.45.x, 0.46.0, and 1.0.0rc1 while waiting for those releases we can workaround this by just casting the value to a boolean. * Fix mypy failures * Mypy fixes again * Prepare release 0.19.1 (#1386) * Update main branch version 0.19.2 (#1388) * Use barrier labels to define intervals for DD (#1358) * Add transpiler tests * Named barrier to select dd intervals * reno * consistent pad arguments in PadDelay * Decouple single_pulse option * fix docsting * Add test * Fix for PadDelay * format * line too long --------- Co-authored-by: kevin-tian <[email protected]> * Remove remaining qiskit.org links (#1397) * Remove remaining qiskit.org links * Update qiskit_ibm_runtime/provider_session.py Co-authored-by: Kevin Tian <[email protected]> --------- Co-authored-by: Kevin Tian <[email protected]> * Support Python 3.12 (#1347) * Support Python 3.12 * update requirments * update requirements * Add deprecation policy (#1405) * add deprecation file * update guide * fix wording Co-authored-by: Kevin Tian <[email protected]> --------- Co-authored-by: Kevin Tian <[email protected]> * Fix scheduling in control flow with instructions of non-uniform durations (#1378) * Map indices for durations in inner block * Add test * Reno * Fix docs * Missing docstring --------- Co-authored-by: Kevin Tian <[email protected]> * Add deprecation warning for abstract circuits (#1404) * Add abstract circuit warning * add reno * use correct Sequence import * unit tests * Fix docs build with Qiskit 1.0 (#1411) * fix docs build * Replace qiskit.tools * Use POST /sessions endpoint (#1372) * wip use post sessions * address comments * fix mypy & lint * use private method * Add reno * attempt fix unit tests * unit tests * add logic to work with IQP * remove todo * Update releasenotes/notes/session-modes-5c22b68620f8d690.yaml Co-authored-by: Jessie Yu <[email protected]> * Update docstrings, passing mode into payload * Update unit tests * address comments * Pass max_time to /sessions * unit tests * integration test --------- Co-authored-by: Jessie Yu <[email protected]> * Use POST /sessions in backend.run sessions (#1415) * Use POST /sessions in backend.run sessions * Add reno * update tests * add test_run_after_cancel back * remove max_time arg from Session * Add max_time * Prepare release 0.20.0 (#1418) * Update main branch version 0.20.1 (#1419) * Update ISA validation (#1414) * check coupling map * restore stack level * mypy * remove layout check * check width * allow pulse gates * add release note * Fix bug with retrieving fake backends (#1402) * bug fix w retrieving fake backend * Move test * fix merge issues --------- Co-authored-by: Elena Peña Tapia <[email protected]> Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: merav-aharoni <[email protected]> Co-authored-by: Salvador de la Puente González <[email protected]> Co-authored-by: Eric Arellano <[email protected]> Co-authored-by: Sanket Panda <[email protected]> Co-authored-by: abbycross <[email protected]> Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Rathish Cholarajan <[email protected]> Co-authored-by: Blake Johnson <[email protected]> Co-authored-by: Kevin J. Sung <[email protected]> Co-authored-by: Jake Lishman <[email protected]> Co-authored-by: Kaelyn Ferris <[email protected]> Co-authored-by: Rebecca Dimock <[email protected]> Co-authored-by: Matthew Treinish <[email protected]> Co-authored-by: Diego Ristè <[email protected]> Co-authored-by: Frank Harkins <[email protected]> Co-authored-by: Luciano Bello <[email protected]>
jyu00
added a commit
that referenced
this pull request
Mar 4, 2024
* Migrate fake backends from `qiskit.providers.fake_provider` (#1140) * Migrate fake provider * fix lint * Only migrate backends and fake_provider file to minimize duplication * Add reno * Update snippet to use runtime service --------- Co-authored-by: Kevin Tian <[email protected]> * Fix BYOB job results bytes typing issue (#1220) * try/except raw result truncation * catch typeError * revert try/except, use response.text * update unit test * Fix fake backends integration test (#1225) * Clean up/fix integration test * Update test case * Fix black * Added deprecation warning when using qiskitrc file (#1219) * Added deprecation warning when using qiskitrc file * Fixed bug whereby deprecation warnings cause failure for all 'qiskit*' modules. Changed warning to deprecation warning. * Release note * Small grammer fix * black --------- Co-authored-by: Kevin Tian <[email protected]> * Update session.from_id() (#1163) * update session.from_id() * add deprecation warning * add reno * Prepare release 0.15.0 (#1226) * Update main branch 0.16.0 (#1227) * Revert `Session.from_id 0.15.0` changes (#1229) * Revert "Update session.from_id() (#1163)" This reverts commit 8fa0472. * add reno * Prepare release 0.15.1 (#1230) * Update main branch to 0.16.0 again (#1232) * Remove all code related to custom programs (#1192) * initial removal * cleanup more files * move result_decoder * fix lint * update unit tests * update integration tests * more docs changes * release note * fix path --------- Co-authored-by: Jessie Yu <[email protected]> * Make sessions thread safe (#1196) * Make sessions thread safe. The lock prevents other threads from sending new jobs to the service only if the session hasnot been setup yet. I.e.: when sending the first "session starter job", or root job. After this happens, the code is left unlocked to allow threads to access the service concurrently. Error handling is needed to ensure the lock is always released. * Allow multiple sessions to execute simultaneously * Make session test more deterministic --------- Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Jessie Yu <[email protected]> * Instance & channel_strategy validation (#1233) * compare cloud instance with channel strategy * fix unit tests * error wording --------- Co-authored-by: Jessie Yu <[email protected]> * Prepare release 0.16.1 (#1239) * release notes * fix release * update to 0.17 (#1240) * Stop referring to qiskit.org in API docs (#1242) * Add job.properties() method (#1252) * Add job.properties() method * add reno * Remove non-API docs and translations (#1256) This is the same as Qiskit/qiskit#11352. Now that qiskit.org/ecosystem/ibm-runtime redirects to docs.quantum.ibm.com, we can simplify the docs. See the PR description in Qiskit/qiskit#11352 for details on the motivation for each change. The only difference from Qiskit is that we still keep the tutorials around because learning.quantum.ibm.com uses them. I used a script with `ripgrep` to confirm that none of the images were in use. * Raise error if backend retrieved not in current instance (#1249) * Error if backend not in instance * add reno * update reno * docs build * fix docs again * docs formatting :/ * add integration test * Update test/integration/test_backend.py Co-authored-by: merav-aharoni <[email protected]> * Update test/integration/test_backend.py Co-authored-by: merav-aharoni <[email protected]> --------- Co-authored-by: merav-aharoni <[email protected]> * Fix backend_converter `faulty_qubit` name error (#1257) * fix backend_converter * add reno * Update Tutorial section names (#1241) * The transpilation tutorial has been updated to use the new runtime transpilation passes, and Batch * Fix style checker * Updated names * Updated section names for transpiled tutorial * Updated grover * Fixed consistency * Final updates --------- Co-authored-by: Kevin Tian <[email protected]> * make test_backend_wrong_instance IQP only (#1258) * Add pointer to qiskit/documentation issues (#1260) * add pointer to qiskit/documentation issues * Update .github/ISSUE_TEMPLATE/config.yml Co-authored-by: Eric Arellano <[email protected]> * Update CONTRIBUTING.md Co-authored-by: Eric Arellano <[email protected]> --------- Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Eric Arellano <[email protected]> * Update `test_backend_wrong_instance` (#1259) * wip debug wrong instance test * enable integration test * use backend names instead of obj * Don't block for the first job in a session (#1170) * don't block if backend not selected * add reno * add test * Add `activated_at` field to session.details() (#1266) * add activated_at to session.details() * add reno * Revert "Don't block for the first job in a session (#1170)" (#1267) * Revert "Don't block for the first job in a session (#1170)" This reverts commit f2e24e4. * keep test * Prepare release 0.17.0 (#1268) * update main branch 0.17.1 (#1269) * Remove test_session_no_backend (#1272) * Added RuntimeJob.queue_info() method (#1210) * Added support for RuntimeJob.queueinfo * Moved methods for consistency with main * Changed backend_status to job.status * lint * update test --------- Co-authored-by: Kevin Tian <[email protected]> * Replace programs with primitives in api docs (#1281) * programs -> primitives * address comment * Deprecate service.runtime (#1278) * Deprecate service.runtime * add reno * Removed support for qiskitrc file (#1121) * Removed support for qiskitrc file * lint --------- Co-authored-by: Kevin Tian <[email protected]> * Add max_time parameter to IBMBackend.open_session() (#1274) * Added max_time to IBMBackend.open_session. * Release note * Changed format of test * Migrate fake backend base classes (#1270) Co-authored-by: Kevin Tian <[email protected]> * Add Q-CTRL integration tests (#1173) * add initial qctrl test file * add test & decorator * add tests from Mirko * Added assertness for preciseness of results * remove print statements * move into e2e folder * setup ci * Update q-ctrl-tests.yml * add account test * add more account tests * Update test/qctrl/test_qctrl.py Co-authored-by: Rathish Cholarajan <[email protected]> * address comments * update date to 2023 * Update test/qctrl/test_qctrl.py Co-authored-by: Blake Johnson <[email protected]> * Update test/qctrl/test_qctrl.py Co-authored-by: Blake Johnson <[email protected]> --------- Co-authored-by: merav-aharoni <[email protected]> Co-authored-by: Rathish Cholarajan <[email protected]> Co-authored-by: Blake Johnson <[email protected]> * update grover tutorial equation (#1293) * Add dynamic circuits backend filter (#1291) * Add dynamic circuits backend filter * add reno * switch docs from mathjax to katex (#1301) Updates the sphinx documentation build to use KaTeX instead of MathJax because the final docs build uses KaTeX. The same change was made in Qiskit in Qiskit/qiskit#11435. * Remove qiskit.org links (#1302) * Update session_id docstring (#1304) * Update provider and qiskit versions (#1305) * Exclude params on job retrieval by default (#1308) * exclude params on job retrieval by default * add reno * add test * Reactive the viewcode extension for docs (#1312) We got source links working in API docs on docs.quantum.ibm.com! See Qiskit/documentation#620. To do this, we need to active `sphinx.ext.viewcode`. Note that we still plan to improve this implementation in the future to have more precise links by using `sphinx.ext.linkcode`, tracked by Qiskit/documentation#517. This PR is to unblock the first iteration of this source links mechanism. * Add config files to manifest (#1319) * Fix pip environment resolution (#1329) Calling `pip install` multiple times can (deeply unfortunately) allow an environment to become out-of-sync; `pip` doesn't "remember" the constraints of previous installation commands. One of the largest effects here is that doing `pip install -e .` _followed_ by `pip install git+<qiskit>@main` installs `qiskit-terra` from the initial installation (via `qiskit==0.45.2`), then installs `qiskit==1.0.0.dev0` from Git, which is an incompatible environment. Doing the whole environment resolution in a single `pip install` command fixes this, as the `qiskit` dependency is correctly resolved to be _only_ the `1.0.0.dev0` version. Co-authored-by: Kevin Tian <[email protected]> * Use IBM-Provider-vendored pub/sub mechanism (#1328) This is being removed from Qiskit 1.0, and the IBM Provider is (until deprecated) taking over brokering the IBM-Runtime-internal events. Co-authored-by: Kevin Tian <[email protected]> * Add transpiler tests (#1323) * Add transpiler tests * remove qiskittestcase * Prepare release 0.18.0 (#1335) * Update main branch 0.18.1 (#1336) * Turn off qiskit.org docs deploy (#1340) * Remove `qiskit.test` (#1292) * replace qiskit.test.ReferenceCircuits * replace BaseQiskitTest * Update qiskit_ibm_runtime/qiskit_runtime_service.py Co-authored-by: Jessie Yu <[email protected]> * Update qiskit_ibm_runtime/sampler.py Co-authored-by: Jessie Yu <[email protected]> * Update qiskit_ibm_runtime/session.py Co-authored-by: Jessie Yu <[email protected]> * Update test/utils.py Co-authored-by: Jessie Yu <[email protected]> --------- Co-authored-by: Jessie Yu <[email protected]> * Add missing API Refs to docs (#1343) ### Summary The documentation from the `transpile` and `fake_provider` modules does not appear in the rendered docs in qiskit.org/documentation or docs.quantum-computing.ibm.com. ### Details and comments Fixes [Qiskit Docs Issue #238](Qiskit/documentation#238) Replaces PR #1330. Transpiler Doc files added: - qiskit_ibm_runtime.transpiler.passes.html - qiskit_ibm_provider.transpiler.passes.basis.html - qiskit_ibm_provider.transpiler.passes.scheduling.ALAPScheduleAnalysis.html - qiskit_ibm_provider.transpiler.passes.scheduling.ASAPScheduleAnalysis.html - qiskit_ibm_provider.transpiler.passes.scheduling.BlockBasePadder.html - qiskit_ibm_provider.transpiler.passes.scheduling.DynamicCircuitInstructionDurations.html - qiskit_ibm_provider.transpiler.passes.scheduling.html - qiskit_ibm_provider.transpiler.passes.scheduling.PadDelay.html - qiskit_ibm_provider.transpiler.passes.scheduling.PadDynamicalDecoupling.html <details> <summary> Fake Provider Docs added: </summary> - qiskit_ibm_runtime.fake_provider.FakeAlmaden.html - qiskit_ibm_runtime.fake_provider.FakeAlmadenV2.html - qiskit_ibm_runtime.fake_provider.FakeArmonk.html - qiskit_ibm_runtime.fake_provider.FakeArmonkV2.html - qiskit_ibm_runtime.fake_provider.FakeAthens.html - qiskit_ibm_runtime.fake_provider.FakeAthensV2.html - qiskit_ibm_runtime.fake_provider.FakeAuckland.html - qiskit_ibm_runtime.fake_provider.FakeBelem.html - qiskit_ibm_runtime.fake_provider.FakeBelemV2.html - qiskit_ibm_runtime.fake_provider.FakeBoeblingen.html - qiskit_ibm_runtime.fake_provider.FakeBoeblingenV2.html - qiskit_ibm_runtime.fake_provider.FakeBogota.html - qiskit_ibm_runtime.fake_provider.FakeBogotaV2.html - qiskit_ibm_runtime.fake_provider.FakeBrooklyn.html - qiskit_ibm_runtime.fake_provider.FakeBrooklynV2.html - qiskit_ibm_runtime.fake_provider.FakeBurlington.html - qiskit_ibm_runtime.fake_provider.FakeBurlingtonV2.html - qiskit_ibm_runtime.fake_provider.FakeCairo.html - qiskit_ibm_runtime.fake_provider.FakeCairoV2.html - qiskit_ibm_runtime.fake_provider.FakeCambridge.html - qiskit_ibm_runtime.fake_provider.FakeCambridgeV2.html - qiskit_ibm_runtime.fake_provider.FakeCasablanca.html - qiskit_ibm_runtime.fake_provider.FakeCasablancaV2.html - qiskit_ibm_runtime.fake_provider.FakeEssex.html - qiskit_ibm_runtime.fake_provider.FakeEssexV2.html - qiskit_ibm_runtime.fake_provider.FakeGeneva.html - qiskit_ibm_runtime.fake_provider.FakeGuadalupe.html - qiskit_ibm_runtime.fake_provider.FakeGuadalupeV2.html - qiskit_ibm_runtime.fake_provider.FakeHanoi.html - qiskit_ibm_runtime.fake_provider.FakeHanoiV2.html - qiskit_ibm_runtime.fake_provider.FakeJakarta.html - qiskit_ibm_runtime.fake_provider.FakeJakartaV2.html - qiskit_ibm_runtime.fake_provider.FakeJohannesburg.html - qiskit_ibm_runtime.fake_provider.FakeJohannesburgV2.html - qiskit_ibm_runtime.fake_provider.FakeKolkata.html - qiskit_ibm_runtime.fake_provider.FakeKolkataV2.html - qiskit_ibm_runtime.fake_provider.FakeLagos.html - qiskit_ibm_runtime.fake_provider.FakeLagosV2.html - qiskit_ibm_runtime.fake_provider.FakeLima.html - qiskit_ibm_runtime.fake_provider.FakeLimaV2.html - qiskit_ibm_runtime.fake_provider.FakeLondon.html - qiskit_ibm_runtime.fake_provider.FakeLondonV2.html - qiskit_ibm_runtime.fake_provider.FakeManhattan.html - qiskit_ibm_runtime.fake_provider.FakeManhattanV2.html - qiskit_ibm_runtime.fake_provider.FakeManila.html - qiskit_ibm_runtime.fake_provider.FakeManilaV2.html - qiskit_ibm_runtime.fake_provider.FakeMelbourne.html - qiskit_ibm_runtime.fake_provider.FakeMelbourneV2.html - qiskit_ibm_runtime.fake_provider.FakeMontreal.html - qiskit_ibm_runtime.fake_provider.FakeMontrealV2.html - qiskit_ibm_runtime.fake_provider.FakeMumbai.html - qiskit_ibm_runtime.fake_provider.FakeMumbaiV2.html - qiskit_ibm_runtime.fake_provider.FakeNairobi.html - qiskit_ibm_runtime.fake_provider.FakeNairobiV2.html - qiskit_ibm_runtime.fake_provider.FakeOslo.html - qiskit_ibm_runtime.fake_provider.FakeOurense.html - qiskit_ibm_runtime.fake_provider.FakeOurenseV2.html - qiskit_ibm_runtime.fake_provider.FakeParis.html - qiskit_ibm_runtime.fake_provider.FakeParisV2.html - qiskit_ibm_runtime.fake_provider.FakePerth.html - qiskit_ibm_runtime.fake_provider.FakePoughkeepsie.html - qiskit_ibm_runtime.fake_provider.FakePoughkeepsieV2.html - qiskit_ibm_runtime.fake_provider.FakePrague.html - qiskit_ibm_runtime.fake_provider.FakeProviderForBackendV2.html - qiskit_ibm_runtime.fake_provider.FakeProvider.html - qiskit_ibm_runtime.fake_provider.FakeQuito.html - qiskit_ibm_runtime.fake_provider.FakeQuitoV2.html - qiskit_ibm_runtime.fake_provider.FakeRochester.html - qiskit_ibm_runtime.fake_provider.FakeRochesterV2.html - qiskit_ibm_runtime.fake_provider.FakeRome.html - qiskit_ibm_runtime.fake_provider.FakeRomeV2.html - qiskit_ibm_runtime.fake_provider.FakeRueschlikon.html - qiskit_ibm_runtime.fake_provider.FakeSantiago.html - qiskit_ibm_runtime.fake_provider.FakeSantiagoV2.html - qiskit_ibm_runtime.fake_provider.FakeSherbrooke.html - qiskit_ibm_runtime.fake_provider.FakeSingapore.html - qiskit_ibm_runtime.fake_provider.FakeSingaporeV2.html - qiskit_ibm_runtime.fake_provider.FakeSydney.html - qiskit_ibm_runtime.fake_provider.FakeSydneyV2.html - qiskit_ibm_runtime.fake_provider.FakeTenerife.html - qiskit_ibm_runtime.fake_provider.FakeTokyo.html - qiskit_ibm_runtime.fake_provider.FakeToronto.html - qiskit_ibm_runtime.fake_provider.FakeTorontoV2.html - qiskit_ibm_runtime.fake_provider.FakeValencia.html - qiskit_ibm_runtime.fake_provider.FakeValenciaV2.html - qiskit_ibm_runtime.fake_provider.FakeVigo.html - qiskit_ibm_runtime.fake_provider.FakeVigoV2.html - qiskit_ibm_runtime.fake_provider.FakeWashington.html - qiskit_ibm_runtime.fake_provider.FakeWashingtonV2.html - qiskit_ibm_runtime.fake_provider.FakeYorktown.html - qiskit_ibm_runtime.fake_provider.FakeYorktownV2.html </details> Co-authored-by: Rebecca Dimock <[email protected]> * Set use_symengine on qpy generation if symengine is installed (#1355) This commit sets the use_symengine flag during qpy export used during job payload generation if symengine is installed. For qiskit <1.0 symengine is a hard dependency on platforms that have support for it (x86_64, aarch64, and ppc64le linux and macOS) and an optional requirement on other qiskit supported platforms, and when available it greatly improves the runtime performance of symbolic expressions in Qiskit. By default QPY opts for the more compatible sympy representation of an unbound ParameterExpression as it's maximally compatible, and means that no matter the environment the payload will be loaded from it will be able to parse the payload. In QPY version 10 a new flag was added to the payload definition that enables users to use a native binary symengine representation of a symbolic expression that is significantly faster to generate and parse, but it still defaults to sympy as using this flag limits the compatibility of the payload. However, for runtime job submission we know that the service always has symengine available so we should be using this flag for job submission if the local environment has symengine installed as it will greatly speed up the serialization of unbound ParameterExpression objects. In Qiskit 1.0, symengine is promoted to a hard requriment for all environments and use_symengine=True is the default in Qiskit's qpy module. But, setting it like this is still a good idea as it will always be safe to do this, it's just in qiskit 1.0 symengine will always be installed. * Fix for unit tests (#1356) * Run all unit tests * Import fake providers * Format * Fake providers not used in this branch * Unused import --------- Co-authored-by: Kevin Tian <[email protected]> * Update flaky integration tests (#1359) * Fix bad Sphinx API doc Provider naming (#1360) This resulted in the imports being called `qiskit_ibm_provider` rather than `qiskit_ibm_runtime`. Co-authored-by: Frank Harkins <[email protected]> * Merge qiskit-ibm-provider into qiskit-ibm-runtime (#1285) * initial commit * more replacements * more replacements * add auth/api * add reno * add qpy module back * address comments * fix docs build * Update invalid token test (#1367) * Copy pub/sub code into qiskit-ibm-runtime (#1349) * Copy pub/sub code into qiskit-ibm-runtime * fix docs build * Remove mthree from requirements-dev (#1370) * Handle Qiskit 1.0 removals (#1363) * Handle Qiskit 1.0 removals * Remove removed qiskit modules * add both qiskit synthesis imports * fix docs build * fix lint errors from 1.0.0RC1 * update basicaer import * Update qiskit_ibm_runtime/fake_provider/fake_backend.py Co-authored-by: Elena Peña Tapia <[email protected]> * address comments * Update imports & docstrings --------- Co-authored-by: Elena Peña Tapia <[email protected]> * Copy over provider session & remove qiskit-ibm-provider (#1368) * Move provider's session & remove qiskit-ibm-provider * fix black * Handle qpy serialization across versions and delete vendored fork (#1377) * Handle qpy serialization across versions and delete vendored fork For the next qiskit-ibm-runtime release it is desired to have it support both Qiskit 0.45.x/0.46.x and Qiskit 1.0.0. To do this with QPY it means we need to emit a fixed qpy version of 10 as that's currently the maximum version the server side can parse. The easiest way to manage this across versions is actually to rely on Qiskit's qpy module again. Starting in Qiskit 1.0.0 the qiskit.qpy.dump() function a new kwarg, version exists to specify the version of qpy emitted. We can use this to control the rollout of QPY format versions as the server side is updated. For right now this is fixed to version 10 which is the same as the QPY format version emitted by 0.45.x and 0.46.0. Because the versions are the same we can just use qiskit's qpy module moving forward as either we're on qiskit 0.45.x/0.46.x and will emit version 10 (as there is no option) or we're on >=1.0.0 and we explicitly set the qpy version to one that's compatible with the server side. The qpy internals usage to serialize parameters and parameter expressions are left in place (although expanded on to include #1355 for parameter expressions) as an alternative needs to be considered for this. It is not a good idea to rely on qpy internals and explicitly private functions to do partial serialization. This commit also deletes the vendored fork as it's never been included in a released version of qiskit-ibm-runtime and nothing is using it anymore. Related to: #1375 * Fix lint * Fix lint again * Run integration tests against Qiskit main (#1376) * Fix qiskit main integratino tests cron job (#1379) * Prepare release 0.19.0 (#1380) * Prepare release 0.19 * add reno stating compatibility * Update main branch version 0.19.1 (#1382) * Porting qiskit-ibm-provider/787: Fix `DynamicCircuitInstructionDurations.from_backend` for both `Backend versions` (#1383) * porting qiskit-ibm-provider/pull/787 * porting qiskit-ibm-provider/pull/787 * black * oops * monkey patch Qiskit/qiskit#11727 * black lynt * mypy --------- Co-authored-by: Kevin Tian <[email protected]> * Cast use_symengine input to a bool (#1385) * Cast use_symengine input to a bool This commit works around a bug in Qiskit 0.45.x, 0.46.0, and 1.0.0rc1 with the `use_symengine` flag on `qpy.dump()`. The dump function has a bug when it receives a truthy value instead of a bool literal that it will generate a corrupt qpy because of a mismatch between how the encoding was processed (the encoding is incorrectly set to sympy in the file header but uses symengine encoding in the actual body of the circuit. This is being fixed in Qiskit/qiskit#11730 for 1.0.0, and will be backported to 0.46.1. But to ensure compatibility with 0.45.x, 0.46.0, and 1.0.0rc1 while waiting for those releases we can workaround this by just casting the value to a boolean. * Fix mypy failures * Mypy fixes again * Prepare release 0.19.1 (#1386) * Update main branch version 0.19.2 (#1388) * Use barrier labels to define intervals for DD (#1358) * Add transpiler tests * Named barrier to select dd intervals * reno * consistent pad arguments in PadDelay * Decouple single_pulse option * fix docsting * Add test * Fix for PadDelay * format * line too long --------- Co-authored-by: kevin-tian <[email protected]> * Remove remaining qiskit.org links (#1397) * Remove remaining qiskit.org links * Update qiskit_ibm_runtime/provider_session.py Co-authored-by: Kevin Tian <[email protected]> --------- Co-authored-by: Kevin Tian <[email protected]> * Support Python 3.12 (#1347) * Support Python 3.12 * update requirments * update requirements * Add deprecation policy (#1405) * add deprecation file * update guide * fix wording Co-authored-by: Kevin Tian <[email protected]> --------- Co-authored-by: Kevin Tian <[email protected]> * Fix scheduling in control flow with instructions of non-uniform durations (#1378) * Map indices for durations in inner block * Add test * Reno * Fix docs * Missing docstring --------- Co-authored-by: Kevin Tian <[email protected]> * Add deprecation warning for abstract circuits (#1404) * Add abstract circuit warning * add reno * use correct Sequence import * unit tests * Fix docs build with Qiskit 1.0 (#1411) * fix docs build * Replace qiskit.tools * Use POST /sessions endpoint (#1372) * wip use post sessions * address comments * fix mypy & lint * use private method * Add reno * attempt fix unit tests * unit tests * add logic to work with IQP * remove todo * Update releasenotes/notes/session-modes-5c22b68620f8d690.yaml Co-authored-by: Jessie Yu <[email protected]> * Update docstrings, passing mode into payload * Update unit tests * address comments * Pass max_time to /sessions * unit tests * integration test --------- Co-authored-by: Jessie Yu <[email protected]> * Use POST /sessions in backend.run sessions (#1415) * Use POST /sessions in backend.run sessions * Add reno * update tests * add test_run_after_cancel back * remove max_time arg from Session * Add max_time * Prepare release 0.20.0 (#1418) * Update main branch version 0.20.1 (#1419) * Update ISA validation (#1414) * check coupling map * restore stack level * mypy * remove layout check * check width * allow pulse gates * add release note * Fix bug with retrieving fake backends (#1402) * bug fix w retrieving fake backend * Move test * Update sessions mode release note (#1430) * Add warning if no backend provided on cloud channel (#1425) * add warning if no backend provided * add test and reno * Update msg & add to base_primitive * Update reno * Update releasenotes/notes/require-cloud-backend-38a74144347c735d.yaml Co-authored-by: Jessie Yu <[email protected]> --------- Co-authored-by: Jessie Yu <[email protected]> * Fix missing releases notes before Runtime 0.9 (#1434) Even though we had the release note files, Reno was not including them. * Use sphinx.ext.linkcode for more precise source code links (#1431) * added .idea to .gitignore for Pycharm * switched sphinx-ext-viewcode for sphinx-ext-linkcode * remove leftover code from Azure Co-authored-by: Eric Arellano <[email protected]> * Update tox.ini * remove leftover code from Azure part 2 Co-authored-by: Eric Arellano <[email protected]> * change dashes to underscores Co-authored-by: Eric Arellano <[email protected]> * switch from qiskit to qiskit_ibm_runtime Co-authored-by: Eric Arellano <[email protected]> * remove leftover code from Azure part 3 Co-authored-by: Eric Arellano <[email protected]> * final updates to determine_github_branch method Co-authored-by: Eric Arellano <[email protected]> * cha Co-authored-by: Eric Arellano <[email protected]> * added colon * Fix issue with inherited methods --------- Co-authored-by: Eric Arellano <[email protected]> Co-authored-by: Kevin Tian <[email protected]> * Update deprecated actions in workflows (#1439) ### Summary In recent PRs including my PR #1431, the CI has been throwing several errors due to old versions of actions that are using node12 or node16 instead of node20. I updated the actions to use the latest versions which should eliminate the CI warnings. * Fix deprecated `upload-artifact` GitHub action (#1441) * Fix bad tox.ini passenv setting (#1445) See Qiskit/qiskit-ibm-provider#825 for context. * Handle control flow instructions in Target generation (#1443) * Handle control flow instructions in Target generation This commit updates the convert_to_target() function that is used to convert the API response objects used to describe a backend and generate a Qiskit Target object from that to properly handle control flow instructions. The supported control flow instructions are listed in the `supported_instructions` field of the configuration payload. [1] This commit updates the logic to look for the presence of known control flow instruction names in that field and add them as appropriate to the target as global variadic instructions to indicate to Qiskit's transpiler and other Target object users that the backend supports the instructions. [1] https://github.com/Qiskit/ibm-quantum-schemas/blob/0231221082ec722cc31db09c0b41a25f441ac338/schemas/backend_configuration_schema.json#L165-L170 * Add release note --------- Co-authored-by: Jessie Yu <[email protected]> * Update backend() type hint to BackendV2 (#1442) Co-authored-by: Jessie Yu <[email protected]> * Updates to tutorials for 1.0 + ISA changes (#1408) * A majority of these tutorials are already 1.0 ready, but were re-run to double-check Additional changes include fixes for the ISA changes in #794 * fix black/lint * docs build * fix docs build again * docs build --------- Co-authored-by: Kevin Tian <[email protected]> * Migrate from `pkg_resources` to `importlib.metadata` (#1449) PR #1347 added `setuptools` to `requirements-dev.txt` in an effort to make `qiskit-ibm-runtime` work with Python 3.12. However, `qiskit_ibm_runtime/api/session.py` actually imports `pkg_resources`, which is provided by setuptools, so really setuptools should have been added to [`REQUIREMENTS`](https://github.com/Qiskit/qiskit-ibm-runtime/blob/e152d122782959a04ebf2330f776d4c4e309ad14/setup.py#L21) in `setup.py` so that it is installed automatically for any downstream users of Qiskit Runtime, too. Better yet, however, is to drop this explicit dependency on setuptools, since [`pkg_resources` is deprecated](https://setuptools.pypa.io/en/latest/pkg_resources.html) in favor of `importlib`. Hence, this PR migrates from `pkg_resources` to `importlib.metadata` (there are a few more words about this [here](googleapis/python-api-core#27 (comment))). My investigation into this was prompted by us trying to add Python 3.12 support to the circuit-knitting-toolbox (Qiskit/qiskit-addon-cutting#429), and seeing CI errors prompted by `qiskit-ibm-runtime`'s importing of `pkg_resources`. Co-authored-by: Kevin Tian <[email protected]> * Add fake backends for newer IBM backends (#1440) * Add fake backends for newer IBM backends This commit adds news fake backend classes for the following newer IBM backends: Algiers, Brisbane, Cusco, Kawasaki, Kyoto, Osaka, Peekskill, Quebec, and Torino. This was done using a modified version of the qiskit script to update backends [1] (to use qiskit-ibm-runtime instead of qiskit-ibmq-provider). There is a standalone script adding this functionality for this repo in #1263. [1] https://github.com/Qiskit/qiskit/blob/stable/0.46/tools/update_fake_backends.py Fixes #1421 * Remove unused import * Add new backends to FakeProviderForBackendV2 too * Don't forget FakeKyiv in docs or provider class --------- Co-authored-by: Kevin Tian <[email protected]> * Run q-ctrl tests nightly (#1452) * Raise if abstract circuits are used (#1437) * support dynamic circuits * raise for abstract circuits * lint * fix test * remove hard coded instructions * check target is not none * lint * fix test * check for error not warning * bypass simulator * fix merge issues * delete extra line --------- Co-authored-by: Elena Peña Tapia <[email protected]> Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: merav-aharoni <[email protected]> Co-authored-by: Salvador de la Puente González <[email protected]> Co-authored-by: Eric Arellano <[email protected]> Co-authored-by: Sanket Panda <[email protected]> Co-authored-by: abbycross <[email protected]> Co-authored-by: Kevin Tian <[email protected]> Co-authored-by: Rathish Cholarajan <[email protected]> Co-authored-by: Blake Johnson <[email protected]> Co-authored-by: Kevin J. Sung <[email protected]> Co-authored-by: Jake Lishman <[email protected]> Co-authored-by: Kaelyn Ferris <[email protected]> Co-authored-by: Rebecca Dimock <[email protected]> Co-authored-by: Matthew Treinish <[email protected]> Co-authored-by: Diego Ristè <[email protected]> Co-authored-by: Frank Harkins <[email protected]> Co-authored-by: Luciano Bello <[email protected]> Co-authored-by: melechlapson <[email protected]> Co-authored-by: melechlapson <[email protected]> Co-authored-by: Sanket Panda <[email protected]> Co-authored-by: Jim Garrison <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Summary
Fixes update made in #1376
Details and comments