update with upstream (#12)

* Add diff to treesitter's ensure_installed languages (nvim-lua#908) * fix: debug.lua (nvim-lua#918) * Automatically set detached state as needed. (nvim-lua#925) * Automatically set detached state as needed. * Use vim.fn.has instead. * Fix int vs bool. * which-key v3 update (nvim-lua#1022) * which-key v3 update * remove unneeded brackets from which-key registration * fix(lazy): added error handling for bootstrap (nvim-lua#1001) * fix: add required parsers from nvim-treesitter * Fix neo-tree keymap description (nvim-lua#932) The lazy.nvim keys parameter does not need the `desc` to be inside a table in the way that vim.keymap.set() does. With this fix the keymap description will be properly shown for example in telescope keymap search * Remove redundant require (nvim-lua#959) * Make debug lazy loadable (nvim-lua#978) * Update README.md | %userprofile%\appdata\local -> %localappdata% (nvim-lua#963) - Replace `%userprofile%\AppData\Local\nvim\` and `$env:USERPROFILE\AppData\Local\nvim` to `%localappdata%\nvim` and `$env:LOCALAPPDATA\nvim respectfully` * Make conform.nvim be lazy-loadable again (nvim-lua#977) The PR that disabled lazy loading (nvim-lua#818) was to fix plugin not being loaded before write. This sets up lazy to load conform before write. * Fix comment about mini.ai example (nvim-lua#985) This example wasn't using `'` so this makes more sense * Neovim 0.10 updates (nvim-lua#936) * Neovim 0.10 updates Provide the buffer for which to enable inlay hints Co-authored-by: Matt Mirus <[email protected]> * refactor: replace vim.loop with vim.uv * Upgrade folke/neodev (sunsetting) to folke/lazydev * Update checkhealth for 0.10 release --------- Co-authored-by: Matt Mirus <[email protected]> Co-authored-by: mrr11k <[email protected]> Co-authored-by: Seb Tomasini <[email protected]> * Update lazydev config to fix "Undefined field `fs_stat`" LSP error (nvim-lua#1040) 7513ec8 switched from neodev to lazydev, but in the process it introduced an LSP error in `init.lua`, which degrades the desired "first timer" experience of kickstart.nvim. This commit follows the configuration suggested in https://github.com/folke/lazydev.nvim/tree/6184ebbbc8045d70077659b7d30c705a588dc62f#-installation which resolves the LSP error. * lint: fix lsp warning in `vim.lsp.inlay_hint.is_enabled` (nvim-lua#947) * fix: lsp warning * review suggestion Co-authored-by: Tom Kuson <[email protected]> --------- Co-authored-by: Tom Kuson <[email protected]> * Update comment about the toggle inlay hints keymap (nvim-lua#1041) * Remove hint toggle in favor of default --------- Co-authored-by: Richard Macklin <[email protected]> Co-authored-by: Smig <[email protected]> Co-authored-by: Per Malmberg <[email protected]> Co-authored-by: Vladislav Grechannik <[email protected]> Co-authored-by: Folke Lemaitre <[email protected]> Co-authored-by: TJ DeVries <[email protected]> Co-authored-by: Damjan 9000 <[email protected]> Co-authored-by: Tom Kuson <[email protected]> Co-authored-by: Artyom <[email protected]> Co-authored-by: Matt Mirus <[email protected]> Co-authored-by: mrr11k <[email protected]> Co-authored-by: Seb Tomasini <[email protected]> Co-authored-by: srdtrk <[email protected]>
Peter-McKinney · Jul 27, 2024 · c97a82e · c97a82e
1 parent 5ef5842
commit c97a82e
Show file tree

Hide file tree

Showing 6 changed files with 77 additions and 60 deletions.
diff --git a/README.md b/README.md
@@ -46,8 +46,8 @@ Neovim's configurations are located under the following paths, depending on your
 | OS | PATH |
 | :- | :--- |
 | Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
-| Windows (cmd)| `%userprofile%\AppData\Local\nvim\` |
-| Windows (powershell)| `$env:USERPROFILE\AppData\Local\nvim\` |
+| Windows (cmd)| `%localappdata%\nvim\` |
+| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` |
 
 #### Recommended Step
 
@@ -77,13 +77,13 @@ git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HO
 If you're using `cmd.exe`:
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git %userprofile%\AppData\Local\nvim\
+git clone https://github.com/nvim-lua/kickstart.nvim.git %localappdata%\nvim\
 ```
 
 If you're using `powershell.exe`
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git $env:USERPROFILE\AppData\Local\nvim\
+git clone https://github.com/nvim-lua/kickstart.nvim.git $env:LOCALAPPDATA\nvim\
 ```
 
 </details>

diff --git a/init.lua b/init.lua
@@ -164,9 +164,6 @@ vim.opt.hlsearch = true
 vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
 
 -- Diagnostic keymaps
-vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
-vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
-vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
 vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
 
 -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
@@ -209,9 +206,12 @@ vim.api.nvim_create_autocmd('TextYankPost', {
 -- [[ Install `lazy.nvim` plugin manager ]]
 --    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
 local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
-if not vim.loop.fs_stat(lazypath) then
+if not vim.uv.fs_stat(lazypath) then
   local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
-  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+  local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+  if vim.v.shell_error ~= 0 then
+    error('Error cloning lazy.nvim:\n' .. out)
+  end
 end ---@diagnostic disable-next-line: undefined-field
 vim.opt.rtp:prepend(lazypath)
 
@@ -236,11 +236,6 @@ require('lazy').setup({
   --
   -- Use `opts = {}` to force a plugin to be loaded.
   --
-  --  This is equivalent to:
-  --    require('Comment').setup({})
-
-  -- "gc" to comment visual regions/lines
-  { 'numToStr/Comment.nvim', opts = {} },
 
   -- Here is a more advanced example where we pass configuration
   -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
@@ -289,16 +284,15 @@ require('lazy').setup({
       require('which-key').setup()
 
       -- Document existing key chains
-      require('which-key').register {
-        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
-        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
-        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
-        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
+      require('which-key').add {
+        { '<leader>c', group = '[C]ode' },
+        { '<leader>d', group = '[D]ocument' },
+        { '<leader>r', group = '[R]ename' },
+        { '<leader>s', group = '[S]earch' },
+        { '<leader>w', group = '[W]orkspace' },
+        { '<leader>t', group = '[T]oggle' },
+        { '<leader>h', group = 'Git [H]unk', mode = { 'n', 'v' } },
       }
-      -- visual mode
-      require('which-key').register({
-        ['<leader>h'] = { 'Git [H]unk' },
-      }, { mode = 'v' })
     end,
   },
 
@@ -426,9 +420,19 @@ require('lazy').setup({
       -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
       { 'j-hui/fidget.nvim', opts = {} },
 
-      -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
+      -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
       -- used for completion, annotations and signatures of Neovim apis
-      { 'folke/neodev.nvim', opts = {} },
+      {
+        'folke/lazydev.nvim',
+        ft = 'lua',
+        opts = {
+          library = {
+            -- Load luvit types when the `vim.uv` word is found
+            { path = 'luvit-meta/library', words = { 'vim%.uv' } },
+          },
+        },
+      },
+      { 'Bilal2453/luvit-meta', lazy = true },
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -505,10 +509,6 @@ require('lazy').setup({
           -- or a suggestion from your LSP for this to activate.
           map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
 
-          -- Opens a popup that displays documentation about the word under your cursor
-          --  See `:help K` for why this keymap.
-          map('K', vim.lsp.buf.hover, 'Hover Documentation')
-
           -- WARN: This is not Goto Definition, this is Goto Declaration.
           --  For example, in C this would take you to the header.
           map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
@@ -519,7 +519,7 @@ require('lazy').setup({
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client.server_capabilities.documentHighlightProvider then
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
             local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
@@ -542,13 +542,13 @@ require('lazy').setup({
             })
           end
 
-          -- The following autocommand is used to enable inlay hints in your
+          -- The following code creates a keymap to toggle inlay hints in your
           -- code, if the language server you are using supports them
           --
           -- This may be unwanted, since they displace some of your code
-          if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
             map('<leader>th', function()
-              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
+              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
             end, '[T]oggle Inlay [H]ints')
           end
         end,
@@ -639,7 +639,8 @@ require('lazy').setup({
 
   { -- Autoformat
     'stevearc/conform.nvim',
-    lazy = false,
+    event = { 'BufWritePre' },
+    cmd = { 'ConformInfo' },
     keys = {
       {
         '<leader>f',
@@ -795,6 +796,11 @@ require('lazy').setup({
           --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
         },
         sources = {
+          {
+            name = 'lazydev',
+            -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
+            group_index = 0,
+          },
           { name = 'nvim_lsp' },
           { name = 'luasnip' },
           { name = 'path' },
@@ -813,7 +819,7 @@ require('lazy').setup({
       --
       -- Examples:
       --  - va)  - [V]isually select [A]round [)]paren
-      --  - yinq - [Y]ank [I]nside [N]ext [']quote
+      --  - yinq - [Y]ank [I]nside [N]ext [Q]uote
       --  - ci'  - [C]hange [I]nside [']quote
       require('mini.ai').setup { n_lines = 500 }
 
@@ -850,7 +856,7 @@ require('lazy').setup({
     },
     build = ':TSUpdate',
     opts = {
-      ensure_installed = { 'bash', 'c', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' },
+      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' },
       -- Autoinstall languages that are not installed
       auto_install = true,
       highlight = {
@@ -1062,10 +1068,6 @@ vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next diagnos
 vim.keymap.set('n', '<leader>ld', vim.diagnostic.open_float, { desc = 'Open floating diagnostic message' })
 vim.o.shellcmdflag = '-ic'
 
-vim.keymap.set('n', '<leader>h', function()
-  vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
-end)
-
 -- toggle hidden file searching in telescope
 function _G.toggle_hidden_file_searching()
   _G.hidden_files = not _G.hidden_files

diff --git a/lua/kickstart/health.lua b/lua/kickstart/health.lua
@@ -6,13 +6,13 @@
 --]]
 
 local check_version = function()
-  local verstr = string.format('%s.%s.%s', vim.version().major, vim.version().minor, vim.version().patch)
-  if not vim.version.cmp then
+  local verstr = tostring(vim.version())
+  if not vim.version.ge then
     vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
     return
   end
 
-  if vim.version.cmp(vim.version(), { 0, 9, 4 }) >= 0 then
+  if vim.version.ge(vim.version(), '0.10-dev') then
     vim.health.ok(string.format("Neovim version is: '%s'", verstr))
   else
     vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))

diff --git a/lua/kickstart/plugins/debug.lua b/lua/kickstart/plugins/debug.lua
@@ -24,14 +24,36 @@ return {
     -- Add your own debuggers here
     'leoluz/nvim-dap-go',
   },
+  keys = function(_, keys)
+    local dap = require 'dap'
+    local dapui = require 'dapui'
+    return {
+      -- Basic debugging keymaps, feel free to change to your liking!
+      { '<F5>', dap.continue, desc = 'Debug: Start/Continue' },
+      { '<F1>', dap.step_into, desc = 'Debug: Step Into' },
+      { '<F2>', dap.step_over, desc = 'Debug: Step Over' },
+      { '<F3>', dap.step_out, desc = 'Debug: Step Out' },
+      { '<leader>b', dap.toggle_breakpoint, desc = 'Debug: Toggle Breakpoint' },
+      {
+        '<leader>B',
+        function()
+          dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+        end,
+        desc = 'Debug: Set Breakpoint',
+      },
+      -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+      { '<F7>', dapui.toggle, desc = 'Debug: See last session result.' },
+      unpack(keys),
+    }
+  end,
   config = function()
     local dap = require 'dap'
     local dapui = require 'dapui'
 
     require('mason-nvim-dap').setup {
       -- Makes a best effort to setup the various debuggers with
       -- reasonable debug configurations
-      automatic_setup = true,
+      automatic_installation = true,
 
       -- You can provide additional configuration to the handlers,
       -- see mason-nvim-dap README for more information
@@ -45,16 +67,6 @@ return {
       },
     }
 
-    -- Basic debugging keymaps, feel free to change to your liking!
-    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
-    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
-    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
-    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
-    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
-    vim.keymap.set('n', '<leader>B', function()
-      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
-    end, { desc = 'Debug: Set Breakpoint' })
-
     -- Dap UI setup
     -- For more information, see |:help nvim-dap-ui|
     dapui.setup {
@@ -77,14 +89,17 @@ return {
       },
     }
 
-    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
-    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
-
     dap.listeners.after.event_initialized['dapui_config'] = dapui.open
     dap.listeners.before.event_terminated['dapui_config'] = dapui.close
     dap.listeners.before.event_exited['dapui_config'] = dapui.close
 
     -- Install golang specific config
-    require('dap-go').setup()
+    require('dap-go').setup {
+      delve = {
+        -- On Windows delve must be run attached or it crashes.
+        -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring
+        detached = vim.fn.has 'win32' == 0,
+      },
+    }
   end,
 }
diff --git a/lua/kickstart/plugins/lint.lua b/lua/kickstart/plugins/lint.lua
@@ -47,7 +47,7 @@ return {
       vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
         group = lint_augroup,
         callback = function()
-          require('lint').try_lint()
+          lint.try_lint()
         end,
       })
     end,

diff --git a/lua/kickstart/plugins/neo-tree.lua b/lua/kickstart/plugins/neo-tree.lua
@@ -11,7 +11,7 @@ return {
   },
   cmd = 'Neotree',
   keys = {
-    { '\\', ':Neotree reveal<CR>', { desc = 'NeoTree reveal' } },
+    { '\\', ':Neotree reveal<CR>', desc = 'NeoTree reveal' },
   },
   opts = {
     filesystem = {