This version was developed for displays 860C, 850C and SW102 and for the TSDZ2 motor controller running the firmware v1.1.2 (TSDZ2-v1.1.2.hex) -- see below attached files.
THIS IS AN HOBBY PROJECT -- WARNING: due to any possible existing bug on the firmware or user incorrect configuration, the motor controller may burn and/or the motor and bicycle wheel may start to run very fast at max power - please be very careful when installing the firmware and keep the bicycle back wheel on the air, have brake sensors installed and the possibility with easy access to quick cut the battery power like removing the battery connector to the TSDZ2.
After installing this firmware you MUST follow the next page to configure and learn how to navigate: https://github.com/OpenSource-EBike-firmware/TSDZ2_wiki/wiki/Features-and-configurations-on-display
Changelog from previous stable release v1.0.0:
-
contribution of https://github.com/NicobobinusX:
-- corrected issue were lights were not working -
contribution of https://github.com/casainho:
-- corrected issue were max battery current during Field Weakening were 1.5x higher -
contribution of https://github.com/sisk22:
-- corrected issue were max battery current changes were not saved -
contribution of https://github.com/bhelm:
-- added option to disable streetmode hotkey (default disabled)
-- disabling throttle also disables virtual throttle
-- added option to enable streetmode without hotkey -
contribution of https://github.com/Kenny-54:
-- add two independent trip memories (A and B)
NOTE: changed TSDZ2 firmware from v1.1.1 to v1.1.2 on 23.06.2023.