Merge branch 'master' into jeremypoulter/issue597

.github/workflows/build.yaml

@@ -41,20 +41,20 @@ jobs:
       fail-fast: false
       matrix:
         env:
-          - openevse_nodemcu-32s
-          - openevse_esp-wrover-kit
-          - openevse_esp-wrover-kit_latest
-          - openevse_huzzah32_dev
-          - openevse_huzzah32
-          - openevse_featheresp32
+          - nodemcu-32s
+          - espressif_esp-wrover-kit
+          - espressif_esp-wrover-kit_latest
+          - adafruit_huzzah32_dev
+          - adafruit_huzzah32
+          - adafruit_featheresp32
           - openevse_wifi_v1
-          - openevse_esp32-gateway-old
-          - openevse_esp32-gateway-e
-          - openevse_esp32-gateway-f
-          - openevse_esp32-gateway-e_dev
-          - openevse_esp32-gateway-f_dev
-          - openevse_esp32-poe-iso
-          - openevse_esp32-heltec-wifi-lora-v2
+          - olimex_esp32-gateway-old
+          - olimex_esp32-gateway-e
+          - olimex_esp32-gateway-f
+          - olimex_esp32-gateway-e_dev
+          - olimex_esp32-gateway-f_dev
+          - olimex_esp32-poe-iso
+          - heltec_esp32-wifi-lora-v2
         gui:
           - name: gui-v2
             repo: OpenEVSE/openevse-gui-v2

api.yml

@@ -773,10 +773,14 @@ paths:
                     x-stoplight:
                       id: 7h1cpgfjj5j9j
                     format: date-time
+                  uptime:
+                    type: integer
+                    description: EVSE gateway uptime, in seconds
                 required:
                   - time
                   - offset
                   - local_time
+                  - uptime
       operationId: get-time
       description: Gets the time set on the OpenEVSE
     post:

docs/developer-guide.md

@@ -56,7 +56,7 @@ pio run -t upload
 If you are using a different development board, you can specify one of the envs setup in `platformio.ini`, for example:
 
 ```bash
-pio run -e openevse_huzzah32_idf -t upload
+pio run -e adafruit_huzzah32 -t upload
 ```
 
 Build artifacts will be in `.pio/build/your_openevse_env`

docs/process.md

@@ -26,11 +26,11 @@ For releases and PR approval the builds are built using the [Build/Release OpenE
 1. Click `Publish release`
 1. The GitHub build workflow will generate the binaries and upload them to the release
 1. Remove any unwanted binaries, need at least:
-    - `openevse_esp32-gateway-e.bin`
-    - `openevse_huzzah32.bin`
+    - `olimex_esp32-gateway-e.bin`
+    - `adafruit_huzzah32.bin`
     - `openevse_wifi_v1.bin`
-    - `openevse_esp-wrover-kit`
-    - `openevse_nodemcu-32s`
+    - `espressif_esp-wrover-kit`
+    - `nodemcu-32s`
 1. Test the uploaded binaries
 1. Unselect the `Pre-release` checkbox
 1. Click `Update release`

docs/wired-ethernet.md

@@ -46,13 +46,13 @@ ESP32-gateway can be connected by micro USB and firmware can be uploaded using e
 First upload:
 
 ```bash
-esptool.py --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x1000 bootloader.bin 0x8000  partitions.bin 0x10000  openevse_esp32-gateway-e.bin
+esptool.py --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x1000 bootloader.bin 0x8000  partitions.bin 0x10000  olimex_esp32-gateway-e.bin
 ```
 
 Subsequent upgrades:
 
 ```bash
-esptool.py --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x1000 openevse_esp32-gateway-e.bin
+esptool.py --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x1000 olimex_esp32-gateway-e.bin
 ```
 
 *Note: On Ubuntu 22.04 if you notice the ESP gateway is continually disconnect from the USB serail port,check this using `dmesg` then`sudo apt remove brltty` will fix this. This is because there is an ebook reader which shares the same serial adaptor chip as the ESP gateway and the udev rules conflict.*
@@ -65,28 +65,28 @@ For Ubuntu 22.04 the simplest solution is to remove the package brltty via sudo
 First upload:
 
 ```bash
-esptool.py --before default_reset --after hard_reset write_flash  0x1000 bootloader.bin 0x8000 partitions.bin 0x10000 openevse_esp32-gateway-f.bin
+esptool.py --before default_reset --after hard_reset write_flash  0x1000 bootloader.bin 0x8000 partitions.bin 0x10000 olimex_esp32-gateway-f.bin
 ```
 
 Subsequent upgrades:
 
 ```bash
-esptool.py --before default_reset --after hard_reset write_flash 0x10000 openevse_esp32-gateway-f.bin`
+esptool.py --before default_reset --after hard_reset write_flash 0x10000 olimex_esp32-gateway-f.bin`
 ```
 
 ## Compile and Upload
 
 | Board                     | Environment              |
 | :------------------------ | :----------------------- |
-| ESP32-GATEWAY pre-E       | openevse_esp32-gateway   |
-| ESP32-GATEWAY E and later | openevse_esp32-gateway-e |
-| ESP32-PoE-ISO             | openevse_esp32-poe-iso   |
+| ESP32-GATEWAY pre-E       | olimex_esp32-gateway   |
+| ESP32-GATEWAY E and later | olimex_esp32-gateway-e |
+| ESP32-PoE-ISO             | olimex_esp32-poe-iso   |
 
 
 Firmware can be compiled using PlatformIO `pio run -e <Environment>`.  The `-t upload` option installs firmware over USB.
 
 ```bash
-pio run -e openevse_esp32-gateway-e -t upload
+pio run -e olimex_esp32-gateway-e -t upload
 ```
 
 ## Operation

models/Config.yaml

@@ -6,7 +6,7 @@ x-examples:
     protocol: '-'
     espflash: 4194304
     espinfo: ESP32r1 2 core WiFi BLE BT
-    buildenv: openevse_esp-wrover-kit
+    buildenv: espressif_esp-wrover-kit
     version: 4.1.0.dev
     diode_check: true
     gfci_check: true
@@ -329,7 +329,7 @@ properties:
     default: 600
     description: |
       The maximum number of seconds to randomly add/subtract from the a scheduled charge start time, eg a value of 600 will adjust the start time my +/- 10 minutes. This is to help prevent large syncrinised loads when multiple verchiles start charging at the same time.
-  is_threephase: 
+  is_threephase:
     type: boolean
     description: |
      Needs to be enabled if charging with 3 phases setup for proper calculations

models/Status.yaml

@@ -175,3 +175,6 @@ properties:
   limit_version:
     type: integer
     description: /limit endpoint current version
+  uptime:
+    type: integer
+    description: EVSE gateway uptime, in seconds

platformio.ini

@@ -41,7 +41,7 @@ lib_deps =
   matth-x/[email protected]
   matth-x/[email protected]
 lib_ignore = WebSockets ; ArduinoOcpp: don't compile built-in WS library
-extra_scripts = 
+extra_scripts =
   pre:scripts/auto_fw_version.py
   scripts/extra_script.py
 debug_flags =
@@ -129,7 +129,7 @@ monitor_speed = 115200
 monitor_filters =
   esp32_exception_decoder
 
-[env:openevse_nodemcu-32s]
+[env:nodemcu-32s]
 board = nodemcu-32s
 build_flags =
   ${common.build_flags}
@@ -139,7 +139,7 @@ build_flags =
   -D WIFI_LED_ON_STATE=LOW
   -D RAPI_PORT=Serial2
 
-[env:openevse_esp-wrover-kit]
+[env:espressif_esp-wrover-kit]
 board = esp-wrover-kit
 lib_deps =
   ${common.lib_deps}
@@ -169,11 +169,11 @@ upload_speed = 2000000
 # export PLATFORMIO_UPLOAD_FLAGS="-p 3232"
 
 
-[env:openevse_esp-wrover-kit_latest]
-extends = env:openevse_esp-wrover-kit
+[env:espressif_esp-wrover-kit_latest]
+extends = env:espressif_esp-wrover-kit
 platform = espressif32
 
-[env:openevse_huzzah32_dev]
+[env:adafruit_huzzah32_dev]
 board = featheresp32
 build_flags =
   ${common.build_flags}
@@ -186,7 +186,7 @@ build_flags =
   -D RAPI_PORT=Serial
   -D DEBUG_PORT=Serial2
 
-[env:openevse_huzzah32]
+[env:adafruit_huzzah32]
 board = featheresp32
 build_flags =
   ${common.build_flags}
@@ -198,7 +198,7 @@ build_flags =
   -D RAPI_PORT=Serial
   -D DEBUG_PORT=Serial2
 
-[env:openevse_featheresp32]
+[env:adafruit_featheresp32]
 board = featheresp32
 build_flags =
   ${common.build_flags}
@@ -233,7 +233,7 @@ build_flags =
   -D TX1=16
 upload_command = curl -F firmware=@$SOURCE http://$UPLOAD_PORT/update --progress-bar | cat
 
-[env:openevse_esp32-gateway-old]
+[env:olimex_esp32-gateway-old]
 # For hardware older than RevE
 board = esp32-gateway
 build_flags =
@@ -248,7 +248,7 @@ build_flags =
   -D ENABLE_WIRED_ETHERNET
 # https://github.com/espressif/arduino-esp32/blob/master/libraries/WiFi/examples/ETH_LAN8720/ETH_LAN8720.ino
 
-[env:openevse_esp32-gateway-f]
+[env:olimex_esp32-gateway-f]
 # For hardware RevF and RevG
 # https://github.com/OpenEVSE/ESP32_WiFi_V3.x/blob/master/docs/wired-ethernet.md
 board = esp32-gateway
@@ -268,31 +268,31 @@ build_flags =
 board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY=\'F\'"
 upload_speed = 921600
 
-[env:openevse_esp32-gateway-e]
+[env:olimex_esp32-gateway-e]
 # For hardware RevE
 # https://github.com/OpenEVSE/ESP32_WiFi_V3.x/blob/master/docs/wired-ethernet.md
-extends = env:openevse_esp32-gateway-f
+extends = env:olimex_esp32-gateway-f
 build_flags =
-  ${env:openevse_esp32-gateway-f.build_flags}
+  ${env:olimex_esp32-gateway-f.build_flags}
 board_build.extra_flags = "-DARDUINO_ESP32_GATEWAY=\'E\'"
 
-[env:openevse_esp32-gateway-e_dev]
-extends = env:openevse_esp32-gateway-e
+[env:olimex_esp32-gateway-e_dev]
+extends = env:olimex_esp32-gateway-e
 build_flags =
-  ${env:openevse_esp32-gateway-e.build_flags}
+  ${env:olimex_esp32-gateway-e.build_flags}
   ${common.debug_flags}
 build_type = debug
 board_build.partitions = ${common.build_partitions_debug}
 
-[env:openevse_esp32-gateway-f_dev]
-extends = env:openevse_esp32-gateway-f
+[env:olimex_esp32-gateway-f_dev]
+extends = env:olimex_esp32-gateway-f
 build_flags =
-  ${env:openevse_esp32-gateway-f.build_flags}
+  ${env:olimex_esp32-gateway-f.build_flags}
   ${common.debug_flags}
 build_type = debug
 board_build.partitions = ${common.build_partitions_debug}
 
-[env:openevse_esp32-poe-iso]
+[env:olimex_esp32-poe-iso]
 # Tested against Rev C board
 board = esp32-poe-iso
 build_flags =
@@ -306,7 +306,7 @@ build_flags =
   -D RESET_ETH_PHY_ON_BOOT=1
 upload_speed = 921600
 
-[env:openevse_esp32-heltec-wifi-lora-v2]
+[env:heltec_esp32-wifi-lora-v2]
 board = heltec_wifi_lora_32_V2
 build_flags =
   ${common.build_flags}

prepare-release.sh

@@ -1,17 +1,17 @@
 #!/bin/bash
 
-# Script to compile all released enviroments and copy build artifacts to project root for easy upload to github releases. 
+# Script to compile all released enviroments and copy build artifacts to project root for easy upload to github releases.
 
 pio run -e openevse_wifi_v1
 cp .pio/build/openevse_wifi_v1/firmware.bin firmware.bin
 
-pio run -e openevse_huzzah32
-cp .pio/build/openevse_wifi_v1/firmware.bin openevse_huzzah32.bin
+pio run -e adafruit_huzzah32
+cp .pio/build/openevse_wifi_v1/firmware.bin adafruit_huzzah32.bin
 
-pio run -e openevse_esp32-gateway-e
+pio run -e olimex_esp32-gateway-e
 cp .pio/build/openevse_wifi_v1/firmware.bin esp32-gateway-e.bin
 
-echo "Done" 
+echo "Done"
 
 
 

readme.md

@@ -1,4 +1,4 @@
-# OpenEVSE WiFi ESP32 Gateway v4
+# OpenEVSE WiFi for ESP32
 
 > **_NOTE:_** Breaking change! This release reccomends a minimum of [7.1.3](https://github.com/OpenEVSE/open_evse/releases) of the OpenEVSE firmware, features including Solar Divert and push button menus may not behave as expected on older firmware.
 

src/emonesp.h

@@ -173,4 +173,6 @@ extern String serial;
 
 void restart_system();
 
+uint64_t uptimeMillis();
+
 #endif // _EMONESP_H

src/evse_man.cpp

@@ -423,7 +423,7 @@ bool EvseManager::claim(EvseClient client, int priority, EvseProperties &target)
   {
     DBUGF("Found slot");
     if(slot->claim(client, priority, target))
-    { 
+    {
       DBUGF("Claim added/updated, waking task");
       _evaluateClaims = true;
       MicroTask.wakeTask(this);
@@ -603,7 +603,11 @@ void EvseManager::setMaxConfiguredCurrent(long amps)
 
 bool EvseManager::isRapiCommandBlocked(String rapi)
 {
-  return rapi.startsWith("$ST");
+#ifdef ENABLE_FULL_RAPI
+  return false;
+#else
+  return !rapi.startsWith("$G");
+#endif
 }
 
 bool EvseManager::serializeClaims(DynamicJsonDocument &doc)

src/main.cpp

@@ -175,6 +175,8 @@ void
 loop() {
   Profile_Start(loop);
 
+  uptimeMillis();
+
   Profile_Start(Mongoose);
   Mongoose.poll(0);
   Profile_End(Mongoose, 10);
@@ -340,3 +342,13 @@ void handle_serial()
     }
   }
 }
+
+// inspired from https://www.snad.cz/en/2018/12/21/uptime-and-esp8266/
+uint64_t uptimeMillis()
+{
+    static uint32_t low32, high32;
+    uint32_t new_low32 = millis();
+    if (new_low32 < low32) high32++;
+    low32 = new_low32;
+    return (uint64_t) high32 << 32 | low32;
+}

src/mqtt.cpp

@@ -195,6 +195,21 @@ void mqttmsg_callback(MongooseString topic, MongooseString payload) {
     }
   }
 
+  else if (topic_string == mqtt_topic + "/config/set") {
+    const size_t capacity = JSON_OBJECT_SIZE(128) + 1024;
+    DynamicJsonDocument doc(capacity);
+    DeserializationError error = deserializeJson(doc, payload_str);
+    if(!error)
+    {
+      bool config_modified = config_deserialize(doc);
+      if(config_modified)
+      {
+        config_commit(false);
+        DBUGLN("Config updated");
+      }
+    }
+  }
+
   // Restart
   else if (topic_string == mqtt_topic + "/restart") {
     mqtt_restart_device(payload_str);
@@ -386,6 +401,10 @@ mqtt_connect()
     mqttclient.subscribe(mqtt_sub_topic);
     yield();
 
+    mqtt_sub_topic = mqtt_topic + "/config/set";
+    mqttclient.subscribe(mqtt_sub_topic);
+    yield();
+
     // ask for a system restart
     mqtt_sub_topic = mqtt_topic + "/restart";
     mqttclient.subscribe(mqtt_sub_topic);

src/time_man.cpp

@@ -278,4 +278,5 @@ void TimeManager::serialise(JsonDocument &doc)
   doc["time"] = time;
   doc["local_time"] = local_time;
   doc["offset"] = offset;
+  doc["uptime"] = uptimeMillis() / 1000;
 }