Skip to content

Commit

Permalink
✨ MarlinUI for Ender 3 v2 DWIN LCD (MarlinFirmware#22594)
Browse files Browse the repository at this point in the history
Co-Authored-By: Taylor Talkington <[email protected]>
  • Loading branch information
2 people authored and Night69 committed Aug 31, 2021
1 parent 9f7fac7 commit 16a7d54
Show file tree
Hide file tree
Showing 35 changed files with 56,525 additions and 52 deletions.
6 changes: 6 additions & 0 deletions Marlin/Configuration.h
Original file line number Diff line number Diff line change
Expand Up @@ -2724,6 +2724,12 @@
//
//#define DWIN_CREALITY_LCD

//
// MarlinUI for Creality's DWIN display (and others)
//
//#define DWIN_MARLINUI_PORTRAIT
//#define DWIN_MARLINUI_LANDSCAPE

//
// Touch Screen Settings
//
Expand Down
60 changes: 38 additions & 22 deletions Marlin/Configuration_adv.h
Original file line number Diff line number Diff line change
Expand Up @@ -137,10 +137,21 @@
#define REDUNDANT_BETA 3950 // Beta value
#endif

//
// Hephestos 2 24V heated bed upgrade kit.
// https://store.bq.com/en/heated-bed-kit-hephestos2
//
/**
* Configuration options for MAX Thermocouples (-2, -3, -5).
* FORCE_HW_SPI: Ignore SCK/MOSI/MISO pins and just use the CS pin & default SPI bus.
* MAX31865_WIRES: Set the number of wires for the probe connected to a MAX31865 board, 2-4. Default: 2
* MAX31865_50HZ: Enable 50Hz filter instead of the default 60Hz.
*/
//#define TEMP_SENSOR_FORCE_HW_SPI
//#define MAX31865_SENSOR_WIRES_0 2
//#define MAX31865_SENSOR_WIRES_1 2
//#define MAX31865_50HZ_FILTER

/**
* Hephestos 2 24V heated bed upgrade kit.
* https://store.bq.com/en/heated-bed-kit-hephestos2
*/
//#define HEPHESTOS2_HEATED_BED_KIT
#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
#undef TEMP_SENSOR_BED
Expand Down Expand Up @@ -1293,11 +1304,14 @@
//#define LCD_SHOW_E_TOTAL
#endif

#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI)
//#define SHOW_REMAINING_TIME // Display estimated time to completion
#if ENABLED(SHOW_REMAINING_TIME)
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
// LCD Print Progress options
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
#if ANY(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, IS_DWIN_MARLINUI)
//#define SHOW_REMAINING_TIME // Display estimated time to completion
#if ENABLED(SHOW_REMAINING_TIME)
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
#endif
#endif

#if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI)
Expand Down Expand Up @@ -1565,16 +1579,10 @@
* printing performance versus fast display updates.
*/
#if HAS_MARLINUI_U8GLIB
// Show SD percentage next to the progress bar
//#define SHOW_SD_PERCENT

// Save many cycles by drawing a hollow frame or no frame on the Info Screen
//#define XYZ_NO_FRAME
#define XYZ_HOLLOW_FRAME
// Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME

// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
//#define USE_BIG_EDIT_FONT
Expand All @@ -1583,9 +1591,6 @@
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
//#define USE_SMALL_INFOFONT
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE

/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
Expand Down Expand Up @@ -1637,6 +1642,17 @@

#endif // HAS_MARLINUI_U8GLIB

#if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
// Show SD percentage next to the progress bar
//#define SHOW_SD_PERCENT

// Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#endif

//
// Additional options for DGUS / DWIN displays
//
Expand Down Expand Up @@ -1702,7 +1718,7 @@
//
// Specify additional languages for the UI. Default specified by LCD_LANGUAGE.
//
#if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE)
#if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE, IS_DWIN_MARLINUI)
//#define LCD_LANGUAGE_2 fr
//#define LCD_LANGUAGE_3 de
//#define LCD_LANGUAGE_4 es
Expand Down Expand Up @@ -2010,9 +2026,9 @@
// calibration.
//#define BTC_PROBE_TEMP 30 // (°C)

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
// Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0 offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
4 changes: 2 additions & 2 deletions Marlin/src/feature/pause.cpp
Original file line number Diff line number Diff line change
Expand Up @@ -238,8 +238,8 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load

if (show_lcd) ui.pause_show_message(PAUSE_MESSAGE_PURGE);

TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(PSTR("Filament Purging...")));
TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Filament Purging..."), CONTINUE_STR));
TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(GET_TEXT(MSG_FILAMENT_CHANGE_PURGE)));
TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, GET_TEXT(MSG_FILAMENT_CHANGE_PURGE), CONTINUE_STR));
wait_for_user = true; // A click or M108 breaks the purge_length loop
for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count)
unscaled_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE);
Expand Down
7 changes: 5 additions & 2 deletions Marlin/src/inc/Conditionals_LCD.h
Original file line number Diff line number Diff line change
Expand Up @@ -488,7 +488,10 @@
#define HAS_MARLINUI_U8GLIB 1
#elif IS_TFTGLCD_PANEL
// Neither DOGM nor HD44780. Fully customized interface.
#elif DISABLED(HAS_GRAPHICAL_TFT)
#elif IS_DWIN_MARLINUI
// Since HAS_MARLINUI_U8GLIB refers to U8G displays
// the DWIN display can define its own flags
#elif !HAS_GRAPHICAL_TFT
#define HAS_MARLINUI_HD44780 1
#endif
#endif
Expand Down Expand Up @@ -1087,7 +1090,7 @@
#define HAS_ETHERNET 1
#endif

#if ENABLED(DWIN_CREALITY_LCD)
#if EITHER(DWIN_CREALITY_LCD, IS_DWIN_MARLINUI)
#define SERIAL_CATCHALL 0
#ifndef LCD_SERIAL_PORT
#if MB(BTT_SKR_MINI_E3_V1_0, BTT_SKR_MINI_E3_V1_2, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO)
Expand Down
6 changes: 5 additions & 1 deletion Marlin/src/inc/Conditionals_post.h
Original file line number Diff line number Diff line change
Expand Up @@ -461,7 +461,7 @@

#endif

#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT)
#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT, IS_DWIN_MARLINUI) || !PIN_EXISTS(SD_DETECT)
#define NO_LCD_REINIT 1 // Suppress LCD re-initialization
#endif

Expand Down Expand Up @@ -3259,13 +3259,17 @@
#ifndef LCD_WIDTH
#if HAS_MARLINUI_U8GLIB
#define LCD_WIDTH 21
#elif IS_DWIN_MARLINUI
// Defined by header
#else
#define LCD_WIDTH TERN(IS_ULTIPANEL, 20, 16)
#endif
#endif
#ifndef LCD_HEIGHT
#if HAS_MARLINUI_U8GLIB
#define LCD_HEIGHT 5
#elif IS_DWIN_MARLINUI
// Defined by header
#else
#define LCD_HEIGHT TERN(IS_ULTIPANEL, 4, 2)
#endif
Expand Down
7 changes: 4 additions & 3 deletions Marlin/src/inc/SanityCheck.h
Original file line number Diff line number Diff line change
Expand Up @@ -798,8 +798,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
#endif
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY)
#if NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI)
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI."
#if NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI, IS_DWIN_MARLINUI)
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, EXTENSIBLE_UI, OR DWIN MarlinUI."
#endif
#endif

Expand Down Expand Up @@ -1697,7 +1697,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#endif

#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_MARLINUI_U8GLIB)
#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !(ENABLED(AUTO_BED_LEVELING_UBL) && EITHER(HAS_MARLINUI_U8GLIB, IS_DWIN_MARLINUI))
#error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD."
#endif

Expand Down Expand Up @@ -2616,6 +2616,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
+ COUNT_ENABLED(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_TFT35) \
+ COUNT_ENABLED(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY, DGUS_LCD_UI_MKS) \
+ COUNT_ENABLED(ENDER2_STOCKDISPLAY, CR10_STOCKDISPLAY, DWIN_CREALITY_LCD) \
+ COUNT_ENABLED(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE) \
+ COUNT_ENABLED(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1) \
+ COUNT_ENABLED(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004) \
+ COUNT_ENABLED(MKS_12864OLED, MKS_12864OLED_SSD1306) \
Expand Down
Loading

0 comments on commit 16a7d54

Please sign in to comment.