photobooth by Andre Rinas

A Photobooth webinterface for Raspberry Pi and Windows.

Features

• Works on Windows and Linux.
  • Under Windows digiCamControl by Duka Istvan can be used to control the camera and to take pictures.
  • Under Linux gPhoto2 is used to control the camera and to take pictures.
• Images are processed with GD/ImageMagick.
• Photobooth caches all generated QR-Codes, Thumbnails and Prints.
• Pictures can be printed directly after they were taken or later from the gallery. Photobooth uses the command line to print the picture. The command can be modified in config.inc.php.
• Settings can be changed in config.inc.php or via Admin Page (under /admin):
  • You can hide the gallery.
  • The gallery can be ordered ascending oder descending by picture age (see $config['gallery']['newest_first'] in config.inc.php).
  • Choose between md5format and dateformat images.
  • You can switch between german, english and french language lables.
  • QR-Code to allow downloading pictures from your Photobooth can be enabled/disabled.
  • Print feature can be enabled/disabled.
  • LivePreview can be enabled/disabled (uses device cam).

Prerequisites

• gphoto2 installed, if used on a Raspberry for DSLR control
• digiCamControl, if used unter Windows for DSLR control
• Apache

Installation

On Raspbian:

sudo apt-get update
sudo apt-get dist-upgrade

On Raspbian Stretch:

sudo apt-get install git apache2 php php-gd libav-tools

On Raspbian Buster

sudo apt-get install git apache2 php php-gd ffmpeg

Get the Photobooth source and set perms

cd /var/www/
sudo rm -r html/
sudo git clone https://github.com/andreknieriem/photobooth html
sudo mkdir -p /var/www/html/thumbs
sudo mkdir -p /var/www/html/images
sudo mkdir -p /var/www/html/print
sudo mkdir -p /var/www/html/qrcodes
sudo chown -R pi: /var/www/
sudo chmod -R 777 /var/www

Install latest version of libgphoto2, choose last stable release

wget https://raw.githubusercontent.com/gonzalo/gphoto2-updater/master/gphoto2-updater.sh && sudo bash gphoto2-updater.sh

Give sudo rights to the webserver user (www-data)

sudo nano /etc/sudoers and add the following line to the file: www-data ALL=(ALL) NOPASSWD: ALL

Ensure that the camera trigger works:

sudo rm /usr/share/dbus-1/services/org.gtk.vfs.GPhoto2VolumeMonitor.service
sudo rm /usr/share/gvfs/mounts/gphoto2.mount
sudo rm /usr/share/gvfs/remote-volume-monitors/gphoto2.monitor
sudo rm /usr/lib/gvfs/gvfs-gphoto2-volume-monitor

Open the IP address of your raspberry pi in a browser

• Change the styling to your needs

On Windows

• Download digiCamControl and extract the archive into digicamcontrol in the photobooth root, e.g. D:\xampp\htdocs\photobooth\digicamcontrol

Troubleshooting

Change Labels

There are three label files in the lang folder, one for de (german), one for en (english) and one for fr (french). You can change the language inside config.inc.php or via Admin Page.

Keep pictures on Camera

Add --keep option for gphoto2 in config.inc.php:

	$config['take_picture']['cmd'] = 'sudo gphoto2 --capture-image-and-download --keep --filename=%s images';

On some cameras you also need to define the capturetarget because Internal RAM is used to store captured picture. To do this use --set-config capturetarget=X option for gphoto2 in config.inc.php (replace "X" with the target of your choice):

	$config['take_picture']['cmd'] = 'sudo gphoto2 --set-config capturetarget=1 --capture-image-and-download --keep --filename=%s images';

To know which capturetarget needs to be defined you need to run:

gphoto2 --get-config capturetarget

Example:

pi@raspberrypi:~ $ gphoto2 --get-config capturetarget
Label: Capture Target
Readonly: 0
Type: RADIO
Current: Internal RAM
Choice: 0 Internal RAM
Choice: 1 Memory card

Kiosk Mode

Automatically start Photobooth in full screen

Edit the LXDE Autostart Script:

sudo nano /etc/xdg/lxsession/LXDE-pi/autostart

and add the following lines:

@xset s off
@xset -dpms
@xset s noblank
@chromium-browser --incognito --kiosk http://localhost/

NOTE: If you're using QR-Code replace http://localhost/ with your local IP-Adress (e.g. http://192.168.4.1), else QR-Code does not work.

Hide the Mouse Cursor

To hide the Mouse Cursor we'll use "unclutter":

sudo apt-get install unclutter

Edit the LXDE Autostart Script again:

sudo nano /etc/xdg/lxsession/LXDE-pi/autostart

and add the following line:

@unclutter -idle 0

Changelog

• 1.5.3: Several new options (disable gallery via config, set countdown timer via config, set cheeeese! Timer via config, ability to show the date/time in the caption of the images in the gallery), all config changes now available in admin page, complete french translation, add empty Gallery message, Fullscreen Mode on old iOS-Devices when starting photobooth from homescreen, StartScreen message is an option in config/admin page now, add instructions for Kiosk Mode, should fix #11, and #2, improve instructions in README, some more small Bugfixes and improvements. Merged pull-request #53 which includes updated pull-requests #52 & #54
• 1.5.2: Bugfixing QR-Code from gallery and live-preview position. Merged pull #45
• 1.5.1: Bugfixing
• 1.5.0: Added Options page under /admin. Bugfix for homebtn. Added option for device webcam preview on countdown
• 1.4.0: Merged several pull requests
• 1.3.2: Bugfix for QR Code on result page
• 1.3.1: Merged pull-request #6,#15 and #16
• 1.3.0: Option for QR and Print Butons, code rework, gulp-sass feature enabled
• 1.2.0: Printing feature, code rework, bugfixes
• 1.1.1: Bugix - QR not working on touch devices
• 1.1.0: Added QR Code to Gallery
• 1.0.0: Initial Release

Tutorial

Raspberry Pi Weddingphotobooth (german)

Contributors and thanks to

• dimsemenov for photoswipe
• t0k4rt for phpqrcode
• nihilor for Printing feature, code rework and bugfixes
• vrs01
• F4bsi
• got-x
• RaphaelKunis
• andi34
• Norman-Sch
• marcogracklauer
• dnks23
• tobiashaas