Controllino (Model HS21-868)

[shawaj]

Pi 4 based

[shawaj]

Uses Embit EMB-LR1302 module http://www.embit.eu/wp-content/uploads/EMB-LR1302-mPCle.pdf

http://www.embit.eu/products/oem-gateways/emb-lr1302-mpci-e-prova/
EMB-LR1302-mPCle.pdf

[shawaj]

[shawaj]

Has 4 LEDs (but only 3 are used):
LED 1 - GREEN or yellow? - always on when power to board
LED 2 - RGB (blue when power to board but can be changed)
LED 3 - Green or yellow? - on when Lora on
LED 4 - not piped to outside / unsure of use case

LED explantion https://hotspot.controllino.com/setup/#elementor-toc__heading-anchor-11

RGB LED functionality:

• Solid red - The miner is currently booting up and is not yet started. Please wait 5 minutes to see if the LED status changes. If it doesn’t change, press Reset Miner in your diagnostics dashboard. After successful reset, run Miner Updater and see if it changes after roughly 5 minutes. If not, please contact our support team together with your MAC address to help you.
• Solid yellow - The miner has booted successfully and instant syncing is in progress. Please leave your device powered and the status LED should change to green color soon. If it doesn’t change after 10 minutes, try to run Instant Sync over your diagnostics dashboard and Reset Miner after 5 minutes of successful Instant Sync.
• Solid green - The miner is running successfully.
• Blue Blink 3x - The miner is getting ready to turn on Bluetooth. Please be prepared to onboard your device now if you need to. If the device blinks 3 times all the time, it means that the Bluetooth software got stuck. Please reboot your miner and retry.
• Blue solid - Bluetooth is turned on. You are ready to pair your device.
• Nothing - If you don’t see any LED light, it means that there is some other software error that needs fixing by our support team. Please contact support and let them know your MAC address and, if you know it, the 3 words name of your miner.

[shawaj]

From this datasheet it seems reset pin is GPIO4 / pin 17 -
Datasheet-EMB-RasPI-130x-Cape.pdf

[shawaj]

U1 chip seems to be a power enable chip - presumably to switch power on and off to the concentrator

From above datasheet seems to be on GPIO17 / pin 11

[shawaj]

Both concentrator and HAT seem to have power enable pins. Concentrator has it as per datasheet
ed885afc400adb2e384cfda27a8f41d407c7cbefa26d05b12057c68223201556_optim.pdf

Power enable is on pin 5 on the concentrator.

@marvinmarnold looks like we might need to modify the reset script for adding two power enables (where provided in the hm-pyhelper perhaps?) for this one

[shawaj]

FCC for concentrator showing internals - https://fccid.io/Z7HEMBLR1302
Internal-photo-5609991.pdf

[shawaj]

Onboarding video - https://hotspot.controllino.com/wp-content/uploads/2021/11/Hotspot-Diagnostics-Intro-Video.mp4

Software image - https://drive.google.com/file/d/1nfj5nLPFgDCjrWAQuBvOg7Pib7ZrZPcs/view?usp=sharing

Diagnostics login info:
Username: admin
Password: myhotspot2021

[shawaj]

Has no button

[Steeod]

Onboarding video - https://hotspot.controllino.com/wp-content/uploads/2021/11/Hotspot-Diagnostics-Intro-Video.mp4

Software image - https://drive.google.com/file/d/1nfj5nLPFgDCjrWAQuBvOg7Pib7ZrZPcs/view?usp=sharing

Diagnostics login info: Username: admin Password: myhotspot2021

@shawaj Can have access on the image too??

[shawaj]

We don't have a working image yet I don't think.

[Steeod]

Software image - https://drive.google.com/file/d/1nfj5nLPFgDCjrWAQuBvOg7Pib7ZrZPcs/view?usp=sharing I mean this one. @shawaj Can I get a copy? I sent request.

[shawaj]

@Steeod https://nebra.io/controllino

Click get started and then download the software image. Then flash to your SD card