could not select device driver "" with capabilities: [[gpu]]. #1034
Comments
|
I had the same problem. |
|
@MaierOli2010 ok, i will try ,thanks!! |
|
Hello! If you didn't already make sure you've installed the |
|
The sentence from @RenaudWasTaken I think you should consider putting the sentence 'For first-time users of Docker 19.03 and GPUs, continue with the instructions for getting started below.' together in a paragraph with the deprecated note. |
|
ya, just had to restart the docker daemon: |
|
Hello, I tried to run I am using Ubuntu 16.04. I checked that I have got the drivers installed: When running Also, |
|
I am having the same issue, with the same version of Docker and the 440.82 driver. If I use --gpus the container launch fails, but without --gpus it works fine. |
|
I followed above blog on collabnix.com- which spelled out this installation - but it was missing this last line to restart docker - then it worked. sh nvidia-container-runtime-script.sh curl -s -L https://nvidia.github.io/nvidia-container-runtime/gpgkey | \
sudo apt-key add -
distribution=$(. /etc/os-release;echo $ID$VERSION_ID)
curl -s -L https://nvidia.github.io/nvidia-container-runtime/$distribution/nvidia-container-runtime.list | \
sudo tee /etc/apt/sources.list.d/nvidia-container-runtime.list
sudo apt-get update
sudo systemctl restart docker
|
|
|
Does anyone have a solution for RHEL? All the above are for Ubuntu only! |
|
From the NVIDIA CUDA/WSL 2 documentation:
|
|
I had the same issue, followed all the steps to reinstall docker ... The problem was I also installed docker previously via snap, notably through Ubuntu OS' installer. So, issues:
So, removing the snap version goes like this:
After that, follow the official instructions to reinstall docker, and be sure to remove the |
|
Does anyone know how to rectify it in EC2 instance? |
|
This worked for me in EC2 sudo apt-get update && sudo apt-get install -y nvidia-container-toolkit |
|
Ensure you have the proper driver and de-activate the ubuntu default VGA driver: https://gist.github.com/nathzi1505/d2aab27ff93a3a9d82dada1336c45041 and https://www.server-world.info/en/note?os=Ubuntu_20.04&p=nvidia&f=1 |
I have the same error <docker: Error response from daemon: could not select device driver "" with capabilities: [[gpu]]> when I run a docker container using the --gpus all flag. I have already tried the above solutions and ensured to restart the docker as well as rebooting the system. However, I still get the same error as before. |
|
Install the Nvidia Container toolkit: distribution=$(. /etc/os-release;echo $ID$VERSION_ID) \
&& curl -s -L https://nvidia.github.io/nvidia-docker/gpgkey | sudo apt-key add - \
&& curl -s -L https://nvidia.github.io/nvidia-docker/$distribution/nvidia-docker.list | sudo tee /etc/apt/sources.list.d/nvidia-docker.list
sudo apt-get update
sudo apt-get install -y nvidia-docker2
sudo systemctl restart docker |
|
did not work in my case ... until rebooted... sometimes you have to turn things off and on again to satisfy the it gods |
This worked for me - thanks! |
|
I recently upgraded docker and encountered this issue as well, under the CentOS 7 environment. I tried various methods but they didn't work, and then I reinstalled the nvidia-container-toolkit and it was fixed. |
|
After reinstalling docker (see https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) and nvidia-docker2 (see https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/install-guide.html#docker), the problem is solved. |
The template below is mostly useful for bug reports and support questions. Feel free to remove anything which doesn't apply to you and add more information where it makes sense.
Also, before reporting a new issue, please make sure that:
1. Issue or feature description
docker: Error response from daemon: could not select device driver "" with capabilities: [[gpu]].
ERRO[0000] error waiting for container: context canceled
2. Steps to reproduce the issue
docker run --gpus all nvidia/cuda:9.0-base nvidia-smi
3. Information to attach (optional if deemed irrelevant)
Some nvidia-container information:
nvidia-container-cli -k -d /dev/tty infocommand not found: nvidia-container-cli
Kernel version from
uname -aLinux BoYun 4.15.0-55-generic Mesos REST API #60~16.04.2-Ubuntu SMP Thu Jul 4 09:03:09 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Any relevant kernel output lines from
dmesg[ 0.000000] microcode: microcode updated early to revision 0xcc, date = 2019-04-01
[ 0.000000] Linux version 4.15.0-55-generic (buildd@lgw01-amd64-038) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1
16.04.10)) Mesos REST API #6016.04.2-Ubuntu SMP Thu Jul 4 09:03:09 UTC 2019 (Ubuntu 4.15.0-55.60~16.04.2-generic 4.15.18)[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-55-generic root=UUID=708c5a31-e9c3-4395-ae8f-1aec6b333848 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9e5afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9e5b000-0x00000000b9e5bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9e5c000-0x00000000b9ea5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9ea6000-0x00000000bda91fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bda92000-0x00000000becc7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000becc8000-0x00000000bed78fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bed79000-0x00000000bf672fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf673000-0x00000000bfafdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfafe000-0x00000000bfafefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb00000-0x00000000bfbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000053dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 10G4CTO1WW/30BD, BIOS FWKT6AA 02/16/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x53e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xbfaff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcbf0-0x000fcbff] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x425f3f000, 0x425f3ffff] PGTABLE
[ 0.000000] BRK [0x425f40000, 0x425f40fff] PGTABLE
[ 0.000000] BRK [0x425f41000, 0x425f41fff] PGTABLE
[ 0.000000] BRK [0x425f42000, 0x425f42fff] PGTABLE
[ 0.000000] BRK [0x425f43000, 0x425f43fff] PGTABLE
[ 0.000000] BRK [0x425f44000, 0x425f44fff] PGTABLE
[ 0.000000] BRK [0x425f45000, 0x425f45fff] PGTABLE
[ 0.000000] BRK [0x425f46000, 0x425f46fff] PGTABLE
[ 0.000000] BRK [0x425f47000, 0x425f47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31664000-0x34b29fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BECEB0A8 0000D4 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BED16628 00010C (v05 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BECEB210 02B411 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000BF672F80 000040
[ 0.000000] ACPI: APIC 0x00000000BED16738 0000BC (v03 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BED167F8 000044 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000BED16840 00009C (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BED168E0 00003C (v01 LENOVO TC-FW 000016A0 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BED16920 000038 (v01 LENOVO TC-FW 000016A0 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x00000000BED16958 00036D (v01 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x00000000BED16CC8 000094 (v01 LENOVO TC-FW 000016A0 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BED16D60 000248 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BED16FA8 002BAE (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BED19B58 000BE3 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x00000000BED1A740 000034 (v01 LENOVO TC-FW 000016A0 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000BED1A778 000054 (v00 LENOVO TC-FW 000016A0 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BED1A7D0 000A03 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BED1B1D8 0054A2 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000BED20680 000042 (v01 LENOVO TC-FW 000016A0 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BED206C8 000E73 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000BED21540 000070 (v01 LENOVO TC-FW 000016A0 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x00000000BED215B0 000034 (v03 LENOVO TC-FW 000016A0 AMI 00000000)
[ 0.000000] ACPI: LUFT 0x00000000BED215E8 0569E2 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000BED77FD0 0000A5 (v32 LENOVO TC-FW 000016A0 TFSM 000F4240)
[ 0.000000] ACPI: BGRT 0x00000000BED78078 000038 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000053dffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x53dfd5000-0x53dffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000053dffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9e5afff]
[ 0.000000] node 0: [mem 0x00000000b9ea6000-0x00000000bda91fff]
[ 0.000000] node 0: [mem 0x00000000bfafe000-0x00000000bfafefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000053dffffff]
[ 0.000000] Reserved but unavailable: 9757 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000053dffffff]
[ 0.000000] On node 0 totalpages: 5224931
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12074 pages used for memmap
[ 0.000000] DMA32 zone: 772680 pages, LIFO batch:31
[ 0.000000] Normal zone: 69504 pages used for memmap
[ 0.000000] Normal zone: 4448256 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9e5b000-0xb9e5bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9e5c000-0xb9ea5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda92000-0xbecc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecc8000-0xbed78fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbed79000-0xbf672fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf673000-0xbfafdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfaff000-0xbfafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfb00000-0xbfbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbfc00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 5143268
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-55-generic root=UUID=708c5a31-e9c3-4395-ae8f-1aec6b333848 ro quiet splash vt.handoff=7
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 20422312K/20899724K available (12300K kernel code, 2472K rwdata, 4284K rodata, 2408K init, 2416K bss, 477412K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39226 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] DMAR: Host address width 39
[ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.004000] DMAR: RMRR base: 0x000000bea42000 end: 0x000000bea61fff
[ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.004000] x2apic enabled
[ 0.004000] Switched APIC routing to cluster x2apic.
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: Detected 3400.000 MHz processor
[ 0.028000] tsc: Detected 3408.000 MHz TSC
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.00 BogoMIPS (lpj=13632000)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.032244] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.032295] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032338] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032479] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.032479] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032483] mce: CPU supports 10 MCE banks
[ 0.032490] CPU0: Thermal monitoring enabled (TM1)
[ 0.032504] process: using mwait in idle threads
[ 0.032506] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032506] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032508] Spectre V2 : Mitigation: Full generic retpoline
[ 0.032508] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.032508] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.032512] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.032513] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.032513] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.032533] MDS: Mitigation: Clear CPU buffers
[ 0.037580] Freeing SMP alternatives memory: 36K
[ 0.040061] TSC deadline timer enabled
[ 0.040066] smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.040109] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.040132] ... version: 4
[ 0.040133] ... bit width: 48
[ 0.040133] ... generic registers: 4
[ 0.040134] ... value mask: 0000ffffffffffff
[ 0.040134] ... max period: 00007fffffffffff
[ 0.040134] ... fixed-purpose events: 3
[ 0.040135] ... event mask: 000000070000000f
[ 0.040162] Hierarchical SRCU implementation.
[ 0.041022] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.041031] smp: Bringing up secondary CPUs ...
[ 0.041078] x86: Booting SMP configuration:
[ 0.041079] .... node #0, CPUs: Add README image #1 Add CentOS images #2 Changing dockerfiles to use gpg key setup #3 Is there support for older versions of CUDA? Something older than 7.0? #4
[ 0.045594] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.045594] Ubuntu 14.04 and CUDA 6.5 #5 Secure and speedy builds #6 Official Library Image in Docker Hub #7
[ 0.048180] smp: Brought up 1 node, 8 CPUs
[ 0.048180] smpboot: Max logical packages: 1
[ 0.048180] smpboot: Total of 8 processors activated (54528.00 BogoMIPS)
[ 0.052355] devtmpfs: initialized
[ 0.052355] x86/mm: Memory block size: 128MB
[ 0.053004] evm: security.selinux
[ 0.053005] evm: security.SMACK64
[ 0.053005] evm: security.SMACK64EXEC
[ 0.053005] evm: security.SMACK64TRANSMUTE
[ 0.053006] evm: security.SMACK64MMAP
[ 0.053006] evm: security.apparmor
[ 0.053006] evm: security.ima
[ 0.053007] evm: security.capability
[ 0.053015] PM: Registering ACPI NVS region [mem 0xb9e5b000-0xb9e5bfff] (4096 bytes)
[ 0.053015] PM: Registering ACPI NVS region [mem 0xbed79000-0xbf672fff] (9412608 bytes)
[ 0.053015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.053015] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.053015] pinctrl core: initialized pinctrl subsystem
[ 0.053015] RTC time: 3:29:36, date: 07/31/19
[ 0.053015] NET: Registered protocol family 16
[ 0.053015] audit: initializing netlink subsys (disabled)
[ 0.053015] audit: type=2000 audit(1564543776.052:1): state=initialized audit_enabled=0 res=1
[ 0.053015] cpuidle: using governor ladder
[ 0.053015] cpuidle: using governor menu
[ 0.053015] ACPI: bus type PCI registered
[ 0.053015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.053015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.053015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.053015] PCI: Using configuration type 1 for base access
[ 0.053015] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.053015] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.053015] ACPI: Added _OSI(Module Device)
[ 0.053015] ACPI: Added _OSI(Processor Device)
[ 0.053015] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.053015] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.053015] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.053015] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.053015] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.056341] ACPI: Executed 23 blocks of module-level executable AML code
[ 0.071459] ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored
[ 0.072231] ACPI: Dynamic OEM Table Load:
[ 0.072237] ACPI: SSDT 0xFFFF91F165B03800 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.072529] ACPI: _PR.CPU0: _OSC native thermal LVT Acked
[ 0.076970] ACPI: Dynamic OEM Table Load:
[ 0.076974] ACPI: SSDT 0xFFFF91F16572EC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.077305] ACPI: Dynamic OEM Table Load:
[ 0.077308] ACPI: SSDT 0xFFFF91F165B796C0 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
[ 0.077558] ACPI: Dynamic OEM Table Load:
[ 0.077561] ACPI: SSDT 0xFFFF91F16571B600 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
[ 0.078522] ACPI: Dynamic OEM Table Load:
[ 0.078526] ACPI: SSDT 0xFFFF91F165B82000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.079107] ACPI: Dynamic OEM Table Load:
[ 0.079110] ACPI: SSDT 0xFFFF91F165719A00 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
[ 0.079440] ACPI: Dynamic OEM Table Load:
[ 0.079443] ACPI: SSDT 0xFFFF91F165718C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.085950] ACPI: Interpreter enabled
[ 0.085981] ACPI: (supports S0 S3 S4 S5)
[ 0.085982] ACPI: Using IOAPIC for interrupt routing
[ 0.086011] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.087203] ACPI: Enabled 10 GPEs in block 00 to 7F
[ 0.089541] ACPI: Power Resource [PG00] (on)
[ 0.089937] ACPI: Power Resource [PG01] (on)
[ 0.090293] ACPI: Power Resource [PG02] (on)
[ 0.094377] ACPI: Power Resource [WRST] (off)
[ 0.094707] ACPI: Power Resource [WRST] (off)
[ 0.095033] ACPI: Power Resource [WRST] (off)
[ 0.095357] ACPI: Power Resource [WRST] (off)
[ 0.095685] ACPI: Power Resource [WRST] (off)
[ 0.096011] ACPI: Power Resource [WRST] (off)
[ 0.096337] ACPI: Power Resource [WRST] (off)
[ 0.096660] ACPI: Power Resource [WRST] (off)
[ 0.096984] ACPI: Power Resource [WRST] (off)
[ 0.097310] ACPI: Power Resource [WRST] (off)
[ 0.097634] ACPI: Power Resource [WRST] (off)
[ 0.097961] ACPI: Power Resource [WRST] (off)
[ 0.098288] ACPI: Power Resource [WRST] (off)
[ 0.098612] ACPI: Power Resource [WRST] (off)
[ 0.098937] ACPI: Power Resource [WRST] (off)
[ 0.099261] ACPI: Power Resource [WRST] (off)
[ 0.099585] ACPI: Power Resource [WRST] (off)
[ 0.099909] ACPI: Power Resource [WRST] (off)
[ 0.100235] ACPI: Power Resource [WRST] (off)
[ 0.100559] ACPI: Power Resource [WRST] (off)
[ 0.114196] ACPI: Power Resource [FN00] (off)
[ 0.114282] ACPI: Power Resource [FN01] (off)
[ 0.114365] ACPI: Power Resource [FN02] (off)
[ 0.114452] ACPI: Power Resource [FN03] (off)
[ 0.114536] ACPI: Power Resource [FN04] (off)
[ 0.115987] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.115991] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.117757] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.118493] PCI host bridge to bus 0000:00
[ 0.118495] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.118496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.118497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.118498] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.118499] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.118500] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.118506] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.118809] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.118841] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.119079] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.119098] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
[ 0.119158] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.119315] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.119338] pci 0000:00:16.0: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
[ 0.119405] pci 0000:00:16.0: PME# supported from D3hot
[ 0.119540] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
[ 0.119554] pci 0000:00:16.3: reg 0x10: [io 0xf060-0xf067]
[ 0.119561] pci 0000:00:16.3: reg 0x14: [mem 0xdf14d000-0xdf14dfff]
[ 0.119718] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.119732] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
[ 0.119738] pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
[ 0.119744] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.119750] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.119756] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.119762] pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
[ 0.119794] pci 0000:00:17.0: PME# supported from D3hot
[ 0.119945] pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100
[ 0.120174] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.120187] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
[ 0.120364] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.120388] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[ 0.120417] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[ 0.120463] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.120629] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.120689] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
[ 0.120758] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.120963] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[ 0.120982] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
[ 0.121058] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.121223] pci 0000:01:00.0: [10de:1b06] type 00 class 0x030000
[ 0.121241] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.121251] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.121260] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.121266] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.121273] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.121367] pci 0000:01:00.1: [10de:10ef] type 00 class 0x040300
[ 0.121381] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[ 0.132046] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.132053] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.132071] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.132074] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.134276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134353] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.134429] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134505] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134581] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134656] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134733] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134809] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.135599] SCSI subsystem initialized
[ 0.135607] libata version 3.00 loaded.
[ 0.135607] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.135607] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.135607] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.135607] vgaarb: loaded
[ 0.135607] ACPI: bus type USB registered
[ 0.135607] usbcore: registered new interface driver usbfs
[ 0.135607] usbcore: registered new interface driver hub
[ 0.135607] usbcore: registered new device driver usb
[ 0.135607] EDAC MC: Ver: 3.0.0
[ 0.135607] PCI: Using ACPI for IRQ routing
[ 0.164087] PCI: pci_cache_line_size set to 64 bytes
[ 0.164122] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.164122] e820: reserve RAM buffer [mem 0xb9e5b000-0xbbffffff]
[ 0.164123] e820: reserve RAM buffer [mem 0xbda92000-0xbfffffff]
[ 0.164124] e820: reserve RAM buffer [mem 0xbfaff000-0xbfffffff]
[ 0.164125] e820: reserve RAM buffer [mem 0x53e000000-0x53fffffff]
[ 0.164178] NetLabel: Initializing
[ 0.164179] NetLabel: domain hash size = 128
[ 0.164179] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.164190] NetLabel: unlabeled traffic allowed by default
[ 0.164412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.164416] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.166466] clocksource: Switched to clocksource hpet
[ 0.170824] VFS: Disk quotas dquot_6.6.0
[ 0.170834] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.170898] AppArmor: AppArmor Filesystem Enabled
[ 0.170914] pnp: PnP ACPI init
[ 0.171158] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.171160] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.171161] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.171164] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171377] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.171738] pnp 00:02: [dma 0 disabled]
[ 0.171768] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.172069] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.172070] system 00:03: [io 0xffff] has been reserved
[ 0.172071] system 00:03: [io 0xffff] has been reserved
[ 0.172072] system 00:03: [io 0xffff] has been reserved
[ 0.172073] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.172074] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.172077] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172149] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.172152] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172166] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.172193] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.172195] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.172393] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.172394] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.172395] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.172396] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.172397] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.172398] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.172399] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.172400] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.172401] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.172403] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.172405] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172436] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.172437] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.172438] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.172439] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.172440] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.172441] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.172442] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.172445] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172691] system 00:09: [io 0xff00-0xfffe] has been reserved
[ 0.172693] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173756] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.173757] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.173758] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.173760] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174654] pnp: PnP ACPI: found 11 devices
[ 0.182118] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.182127] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.182128] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.182130] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.182132] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.182135] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182136] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.182137] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182138] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
[ 0.182139] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.182140] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.182141] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.182142] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.182268] NET: Registered protocol family 2
[ 0.182405] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.182617] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.182690] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.182719] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.182771] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.182837] NET: Registered protocol family 1
[ 0.184135] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.184143] PCI: CLS 0 bytes, default 64
[ 0.184164] Unpacking initramfs...
[ 0.733530] Freeing initrd memory: 54040K
[ 0.733583] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.733586] software IO TLB [mem 0xb5e5b000-0xb9e5b000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.733868] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns
[ 0.734073] Scanning for low memory corruption every 60 seconds
[ 0.734631] Initialise system trusted keyrings
[ 0.734638] Key type blacklist registered
[ 0.734713] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.735407] zbud: loaded
[ 0.735800] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.735944] fuse init (API version 7.26)
[ 0.738184] Key type asymmetric registered
[ 0.738185] Asymmetric key parser 'x509' registered
[ 0.738202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.738253] io scheduler noop registered
[ 0.738253] io scheduler deadline registered
[ 0.738269] io scheduler cfq registered (default)
[ 0.738672] pcieport 0000:00:01.0: Signaling PME with IRQ 121
[ 0.738711] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.738711] vesafb: scrolling: redraw
[ 0.738713] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.738719] vesafb: framebuffer at 0xd1000000, mapped to 0x (ptrval), using 1216k, total 1216k
[ 0.738782] Console: switching to colour frame buffer device 80x30
[ 0.738787] fb0: VESA VGA frame buffer device
[ 0.738796] intel_idle: MWAIT substates: 0x142120
[ 0.738797] intel_idle: v0.4.1 model 0x5E
[ 0.739219] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.739306] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.739325] ACPI: Sleep Button [SLPB]
[ 0.739345] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.739362] ACPI: Power Button [PWRB]
[ 0.739382] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.739444] ACPI: Power Button [PWRF]
[ 0.797795] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.856274] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.856275] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.856424] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.856425] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.856587] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.877420] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.900433] 0000:00:16.3: ttyS4 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
[ 0.900745] Linux agpgart interface v0.103
[ 0.901324] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 0.901329] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 0.927170] loop: module loaded
[ 0.927268] libphy: Fixed MDIO Bus: probed
[ 0.927269] tun: Universal TUN/TAP device driver, 1.6
[ 0.927326] PPP generic driver version 2.4.2
[ 0.927385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.927386] ehci-pci: EHCI PCI platform driver
[ 0.927391] ehci-platform: EHCI generic platform driver
[ 0.927397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.927398] ohci-pci: OHCI PCI platform driver
[ 0.927403] ohci-platform: OHCI generic platform driver
[ 0.927406] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.927541] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.927545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.928640] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[ 0.928644] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.928768] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.928769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.928770] usb usb1: Product: xHCI Host Controller
[ 0.928771] usb usb1: Manufacturer: Linux 4.15.0-55-generic xhci-hcd
[ 0.928772] usb usb1: SerialNumber: 0000:00:14.0
[ 0.928904] hub 1-0:1.0: USB hub found
[ 0.928928] hub 1-0:1.0: 16 ports detected
[ 0.930402] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.930404] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.930407] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.930437] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.930438] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.930439] usb usb2: Product: xHCI Host Controller
[ 0.930440] usb usb2: Manufacturer: Linux 4.15.0-55-generic xhci-hcd
[ 0.930441] usb usb2: SerialNumber: 0000:00:14.0
[ 0.930564] hub 2-0:1.0: USB hub found
[ 0.930585] hub 2-0:1.0: 10 ports detected
[ 0.931516] usb: port power management may be unreliable
[ 0.931673] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.931673] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.932439] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.932627] mousedev: PS/2 mouse device common for all mice
[ 0.933008] rtc_cmos 00:05: RTC can wake from S4
[ 0.933431] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.933510] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.933514] i2c /dev entries driver
[ 0.933543] device-mapper: uevent: version 1.0.3
[ 0.933643] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[ 0.933645] intel_pstate: Intel P-state driver initializing
[ 0.934911] intel_pstate: HWP enabled
[ 0.935611] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.936719] intel_pmc_core: initialized
[ 0.936948] NET: Registered protocol family 10
[ 0.942195] Segment Routing with IPv6
[ 0.942205] NET: Registered protocol family 17
[ 0.942491] Key type dns_resolver registered
[ 0.943844] RAS: Correctable Errors collector initialized.
[ 0.943860] microcode: sig=0x506e3, pf=0x2, revision=0xcc
[ 0.944317] microcode: Microcode Update Driver: v2.2.
[ 0.944323] sched_clock: Marking stable (944313365, 0)->(925986193, 18327172)
[ 0.944750] registered taskstats version 1
[ 0.944755] Loading compiled-in X.509 certificates
[ 0.946586] Loaded X.509 cert 'Build time autogenerated kernel key: e7667cc27bc30ba13155414766d1ea2a3e33b877'
[ 0.946601] zswap: loaded using pool lzo/zbud
[ 0.950287] Key type big_key registered
[ 0.950301] Key type trusted registered
[ 0.951921] Key type encrypted registered
[ 0.951923] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.952384] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.958046] ima: Allocated hash algorithm: sha1
[ 1.012691] evm: HMAC attrs: 0x1
[ 1.013255] Magic number: 11:577:463
[ 1.013571] rtc_cmos 00:05: setting system clock to 2019-07-31 03:29:37 UTC (1564543777)
[ 1.013817] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.013818] EDD information not available.
[ 1.264092] usb 1-11: new low-speed USB device number 2 using xhci_hcd
[ 1.305499] Freeing unused kernel image memory: 2408K
[ 1.320102] Write protecting the kernel read-only data: 20480k
[ 1.321475] Freeing unused kernel image memory: 2008K
[ 1.321842] Freeing unused kernel image memory: 1860K
[ 1.327284] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.327284] x86/mm: Checking user space page tables
[ 1.332466] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.340720] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.340773] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.340780] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.419262] usb 1-11: New USB device found, idVendor=093a, idProduct=2510
[ 1.419263] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.419264] usb 1-11: Product: USB Optical Mouse
[ 1.419265] usb 1-11: Manufacturer: PixArt
[ 1.428594] pps_core: LinuxPPS API ver. 1 registered
[ 1.428595] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 1.429350] PTP clock support registered
[ 1.429546] ahci 0000:00:17.0: version 3.0
[ 1.431872] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.431873] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.439956] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.439958] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.451568] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.454226] usbcore: registered new interface driver usbhid
[ 1.454227] usbhid: USB HID core driver
[ 1.455362] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:093A:2510.0001/input/input4
[ 1.455507] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-11/input0
[ 1.497623] scsi host0: ahci
[ 1.497994] scsi host1: ahci
[ 1.498239] scsi host2: ahci
[ 1.498684] scsi host3: ahci
[ 1.499047] scsi host4: ahci
[ 1.499358] scsi host5: ahci
[ 1.499390] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 123
[ 1.499394] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 123
[ 1.499395] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 123
[ 1.499396] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 123
[ 1.499397] ata5: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b300 irq 123
[ 1.499399] ata6: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b380 irq 123
[ 1.499797] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.576203] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.642587] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 4c:cc:6a:c5:b7:64
[ 1.642588] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.642649] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.643498] e1000e 0000:00:1f.6 eno1: renamed from eth0
[ 1.760703] clocksource: Switched to clocksource tsc
[ 1.815145] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.815160] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.815173] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.815187] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.815201] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.815212] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.815617] ata1.00: ATA-8: PLEXTOR PX-128M7VC, 1.05, max UDMA/133
[ 1.815618] ata1.00: 250069680 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.816196] ata1.00: configured for UDMA/133
[ 1.816498] scsi 0:0:0:0: Direct-Access ATA PLEXTOR PX-128M7 1.05 PQ: 0 ANSI: 5
[ 1.816991] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.817349] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.817420] sd 0:0:0:0: [sda] Write Protect is off
[ 1.817422] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817539] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.820637] sda: sda1 sda2 < sda5 >
[ 1.821917] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.853260] ata2.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133
[ 1.853261] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.904206] ata2.00: configured for UDMA/133
[ 1.904441] scsi 1:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5
[ 1.904885] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.905164] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.905165] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.905204] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.905205] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.905346] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.992952] sdb: sdb1
[ 1.993240] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.272478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.276576] random: fast init done
[ 2.364721] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.384145] systemd[1]: Detected architecture x86-64.
[ 2.384339] systemd[1]: Set hostname to .
[ 2.440406] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.440485] systemd[1]: Created slice System Slice.
[ 2.440504] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.440520] systemd[1]: Listening on Syslog Socket.
[ 2.440542] systemd[1]: Listening on Journal Socket.
[ 2.440791] systemd[1]: Starting Uncomplicated firewall...
[ 2.440844] systemd[1]: Created slice User and Session Slice.
[ 2.458285] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.467276] lp: driver loaded but no devices found
[ 2.470213] ppdev: user-space parallel port driver
[ 2.492227] systemd-journald[299]: Received request to flush runtime journal from PID 1
[ 2.596636] audit: type=1400 audit(1564543779.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=516 comm="apparmor_parser"
[ 2.597022] audit: type=1400 audit(1564543779.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=513 comm="apparmor_parser"
[ 2.597024] audit: type=1400 audit(1564543779.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=513 comm="apparmor_parser"
[ 2.598545] audit: type=1400 audit(1564543779.079:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=514 comm="apparmor_parser"
[ 2.599590] audit: type=1400 audit(1564543779.079:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=509 comm="apparmor_parser"
[ 2.599593] audit: type=1400 audit(1564543779.079:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser"
[ 2.599594] audit: type=1400 audit(1564543779.079:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=509 comm="apparmor_parser"
[ 2.599596] audit: type=1400 audit(1564543779.079:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser"
[ 2.600332] audit: type=1400 audit(1564543779.083:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=519 comm="apparmor_parser"
[ 2.661424] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.662749] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.662750] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.662750] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.662751] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.662751] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.662752] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.666427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.694217] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.694219] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.705677] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.705679] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 2.705680] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.705681] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.705681] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.705682] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.705683] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.705684] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.714121] AVX2 version of gcm_enc/dec engaged.
[ 2.714122] AES CTR mode by8 optimization enabled
[ 2.716212] ipmi message handler version 39.2
[ 2.716469] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 2.716520] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 2.716563] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 2.716605] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 2.716644] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 2.718432] ipmi device interface
[ 2.749244] intel_rapl: Found RAPL domain package
[ 2.749246] intel_rapl: Found RAPL domain core
[ 2.749247] intel_rapl: Found RAPL domain dram
[ 2.851313] nvidia: loading out-of-tree module taints kernel.
[ 2.851317] nvidia: module license 'NVIDIA' taints kernel.
[ 2.851318] Disabling lock debugging due to kernel taint
[ 2.855092] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 2.862490] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[ 2.862950] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.962382] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 430.34 Wed Jun 26 12:19:48 CDT 2019
[ 2.977231] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.34 Wed Jun 26 12:15:10 CDT 2019
[ 2.979860] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.979862] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 3.102703] Adding 999420k swap on /dev/sda5. Priority:-2 extents:1 across:999420k SSFS
[ 3.134477] random: crng init done
[ 3.134478] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.355739] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 3.544247] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 3.608733] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 3.608780] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 3.608818] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 3.608854] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 6.270985] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.271037] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 2410.676648] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2410.701315] usb 2-2: New USB device found, idVendor=1058, idProduct=25e1
[ 2410.701318] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2410.701319] usb 2-2: Product: My Passport 25E1
[ 2410.701321] usb 2-2: Manufacturer: Western Digital
[ 2410.701322] usb 2-2: SerialNumber: 57585331413538433138305A
[ 2410.710146] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2410.710338] scsi host6: usb-storage 2-2:1.0
[ 2410.710420] usbcore: registered new interface driver usb-storage
[ 2410.711728] usbcore: registered new interface driver uas
[ 2411.728830] scsi 6:0:0:0: Direct-Access WD My Passport 25E1 1021 PQ: 0 ANSI: 6
[ 2411.729026] scsi 6:0:0:1: Enclosure WD SES Device 1021 PQ: 0 ANSI: 6
[ 2411.729945] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2411.730134] scsi 6:0:0:1: Attached scsi generic sg3 type 13
[ 2411.730740] sd 6:0:0:0: [sdc] Spinning up disk...
[ 2412.752407] .
[ 2415.216064] scsi 6:0:0:1: Wrong diagnostic page; asked for 1 got 8
[ 2415.216072] scsi 6:0:0:1: Failed to get diagnostic page 0x1
[ 2415.216074] scsi 6:0:0:1: Failed to bind enclosure -19
[ 2415.216115] ses 6:0:0:1: Attached Enclosure device
[ 2415.217093] ready
[ 2415.217592] sd 6:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2415.217822] sd 6:0:0:0: [sdc] Write Protect is off
[ 2415.217823] sd 6:0:0:0: [sdc] Mode Sense: 47 00 10 08
[ 2415.218055] sd 6:0:0:0: [sdc] No Caching mode page found
[ 2415.218058] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2415.249062] sdc: sdc1
[ 2415.250017] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2620.724637] kauditd_printk_skb: 12 callbacks suppressed
[ 2620.724637] audit: type=1400 audit(1564546397.596:23): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.724655] audit: type=1400 audit(1564546397.596:24): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.724669] audit: type=1400 audit(1564546397.596:25): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.724672] audit: type=1400 audit(1564546397.596:26): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872812] audit: type=1400 audit(1564546397.744:27): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872830] audit: type=1400 audit(1564546397.744:28): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872846] audit: type=1400 audit(1564546397.744:29): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872849] audit: type=1400 audit(1564546397.744:30): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.996500] audit: type=1400 audit(1564546397.868:31): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5021 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.996520] audit: type=1400 audit(1564546397.868:32): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5021 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 6731.798483] usb 2-8: new SuperSpeed USB device number 3 using xhci_hcd
[ 6731.819663] usb 2-8: New USB device found, idVendor=0781, idProduct=5591
[ 6731.819667] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6731.819671] usb 2-8: Product: Ultra USB 3.0
[ 6731.819674] usb 2-8: Manufacturer: SanDisk
[ 6731.819678] usb 2-8: SerialNumber: 4C530001290608109415
[ 6731.820626] usb-storage 2-8:1.0: USB Mass Storage device detected
[ 6731.820935] scsi host7: usb-storage 2-8:1.0
[ 6732.831332] scsi 7:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 6732.831948] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 6732.832308] sd 7:0:0:0: [sdd] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
[ 6732.833109] sd 7:0:0:0: [sdd] Write Protect is off
[ 6732.833114] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 6732.833524] sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6732.840181] sdd: sdd1
[ 6732.841822] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[10752.959129] usb 2-2: USB disconnect, device number 2
[10773.603018] xhci_hcd 0000:00:14.0: Cannot set link state.
[10773.603028] usb usb2-port8: cannot disable (err = -32)
[10773.603037] usb 2-8: USB disconnect, device number 3
[12559.911346] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[13744.984501] usb 2-8: new SuperSpeed USB device number 4 using xhci_hcd
[13745.009321] usb 2-8: New USB device found, idVendor=1058, idProduct=25e1
[13745.009326] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13745.009329] usb 2-8: Product: My Passport 25E1
[13745.009333] usb 2-8: Manufacturer: Western Digital
[13745.009336] usb 2-8: SerialNumber: 57585331413538433138305A
[13745.010200] usb-storage 2-8:1.0: USB Mass Storage device detected
[13745.010434] scsi host6: usb-storage 2-8:1.0
[13746.029025] scsi 6:0:0:0: Direct-Access WD My Passport 25E1 1021 PQ: 0 ANSI: 6
[13746.029328] scsi 6:0:0:1: Enclosure WD SES Device 1021 PQ: 0 ANSI: 6
[13746.030744] sd 6:0:0:0: Attached scsi generic sg2 type 0
[13746.031004] ses 6:0:0:1: Attached Enclosure device
[13746.031216] ses 6:0:0:1: Attached scsi generic sg3 type 13
[13750.154258] ses 6:0:0:1: Wrong diagnostic page; asked for 1 got 8
[13750.154263] ses 6:0:0:1: Failed to get diagnostic page 0x1
[13750.154264] ses 6:0:0:1: Failed to bind enclosure -19
[13750.154456] sd 6:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[13750.154688] sd 6:0:0:0: [sdc] Write Protect is off
[13750.154689] sd 6:0:0:0: [sdc] Mode Sense: 47 00 10 08
[13750.154930] sd 6:0:0:0: [sdc] No Caching mode page found
[13750.154932] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[13750.187381] sdc: sdc1
[13750.188288] sd 6:0:0:0: [sdc] Attached SCSI disk
[19535.351284] perf: interrupt took too long (3158 > 3152), lowering kernel.perf_event_max_sample_rate to 63250
[54395.812727] perf: interrupt took too long (3950 > 3947), lowering kernel.perf_event_max_sample_rate to 50500
[79698.800706] kauditd_printk_skb: 6 callbacks suppressed
[79698.800707] audit: type=1400 audit(1564623475.301:39): apparmor="DENIED" operation="capable" profile="/usr/bin/evince//sanitized_helper" pid=18648 comm="chrome" capability=21 capname="sys_admin"
[79699.065127] audit: type=1400 audit(1564623475.565:40): apparmor="DENIED" operation="file_mmap" profile="/usr/bin/evince//sanitized_helper" name="/home/xwj/.config/google-chrome/PepperFlash/32.0.0.223/libpepflashplayer.so" pid=18638 comm="chrome" requested_mask="m" denied_mask="m" fsuid=1000 ouid=1000
[79699.065398] audit: type=1400 audit(1564623475.565:41): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=0 requested_mask="create" denied_mask="create"
[79699.066622] audit: type=1400 audit(1564623475.569:42): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=15 requested_mask="create" denied_mask="create"
[79699.093037] audit: type=1400 audit(1564623475.593:43): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18680 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=0 requested_mask="create" denied_mask="create"
[79699.093328] audit: type=1400 audit(1564623475.593:44): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18680 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=0 requested_mask="create" denied_mask="create"
[79699.094673] audit: type=1400 audit(1564623475.597:45): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="chrome" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[79699.122700] audit: type=1400 audit(1564623475.625:46): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="Chrome_IOThread" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[79699.129105] audit: type=1400 audit(1564623475.629:47): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolSingl" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[79699.131675] audit: type=1400 audit(1564623475.633:48): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolSingl" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[82063.924809] audit: type=1400 audit(1564625840.421:49): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82063.924824] audit: type=1400 audit(1564625840.421:50): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82063.924844] audit: type=1400 audit(1564625840.421:51): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82063.924848] audit: type=1400 audit(1564625840.421:52): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128840] audit: type=1400 audit(1564625845.625:53): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128864] audit: type=1400 audit(1564625845.625:54): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128885] audit: type=1400 audit(1564625845.625:55): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128890] audit: type=1400 audit(1564625845.625:56): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[90909.028696] perf: interrupt took too long (4942 > 4937), lowering kernel.perf_event_max_sample_rate to 40250
[97345.350157] aufs 4.15-20180219
[97346.144132] audit: type=1400 audit(1564641122.632:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=27040 comm="apparmor_parser"
[97346.201164] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[97346.202307] Bridge firewalling registered
[97346.209996] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[97346.229929] ip_tables: (C) 2000-2006 Netfilter Core Team
[97346.590142] Initializing XFRM netlink socket
[97346.602887] Netfilter messages via NETLINK v0.30.
[97346.607596] ctnetlink v0.93: registering with nfnetlink.
[97346.823661] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[98317.401065] docker0: port 1(veth480d56f) entered blocking state
[98317.401072] docker0: port 1(veth480d56f) entered disabled state
[98317.401235] device veth480d56f entered promiscuous mode
[98317.401471] IPv6: ADDRCONF(NETDEV_UP): veth480d56f: link is not ready
[98317.401477] docker0: port 1(veth480d56f) entered blocking state
[98317.401485] docker0: port 1(veth480d56f) entered forwarding state
[98317.402786] docker0: port 1(veth480d56f) entered disabled state
[98317.753244] eth0: renamed from veth3fd53d1
[98317.777109] IPv6: ADDRCONF(NETDEV_CHANGE): veth480d56f: link becomes ready
[98317.777215] docker0: port 1(veth480d56f) entered blocking state
[98317.777219] docker0: port 1(veth480d56f) entered forwarding state
[98317.777349] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[98318.260036] docker0: port 1(veth480d56f) entered disabled state
[98318.260081] veth3fd53d1: renamed from eth0
[98318.320587] docker0: port 1(veth480d56f) entered disabled state
[98318.323624] device veth480d56f left promiscuous mode
[98318.323630] docker0: port 1(veth480d56f) entered disabled state
[99709.698981] docker0: port 1(vetha62a648) entered blocking state
[99709.698983] docker0: port 1(vetha62a648) entered disabled state
[99709.699042] device vetha62a648 entered promiscuous mode
[99709.699111] IPv6: ADDRCONF(NETDEV_UP): vetha62a648: link is not ready
[99709.913906] eth0: renamed from veth9f3a970
[99709.937852] IPv6: ADDRCONF(NETDEV_CHANGE): vetha62a648: link becomes ready
[99709.937901] docker0: port 1(vetha62a648) entered blocking state
[99709.937904] docker0: port 1(vetha62a648) entered forwarding state
[99710.387986] docker0: port 1(vetha62a648) entered disabled state
[99710.388025] veth9f3a970: renamed from eth0
[99710.447029] docker0: port 1(vetha62a648) entered disabled state
[99710.449128] device vetha62a648 left promiscuous mode
[99710.449132] docker0: port 1(vetha62a648) entered disabled state
[101431.966319] docker0: port 1(veth144fde3) entered blocking state
[101431.966325] docker0: port 1(veth144fde3) entered disabled state
[101431.966546] device veth144fde3 entered promiscuous mode
[101431.966983] IPv6: ADDRCONF(NETDEV_UP): veth144fde3: link is not ready
[101432.026363] docker0: port 1(veth144fde3) entered disabled state
[101432.033103] device veth144fde3 left promiscuous mode
[101432.033115] docker0: port 1(veth144fde3) entered disabled state
[101805.987660] docker0: port 1(veth84f19d3) entered blocking state
[101805.987667] docker0: port 1(veth84f19d3) entered disabled state
[101805.987841] device veth84f19d3 entered promiscuous mode
[101805.988100] IPv6: ADDRCONF(NETDEV_UP): veth84f19d3: link is not ready
[101806.040608] docker0: port 1(veth84f19d3) entered disabled state
[101806.044233] device veth84f19d3 left promiscuous mode
[101806.044243] docker0: port 1(veth84f19d3) entered disabled state
[102189.935396] docker0: port 1(vethc0f2bb2) entered blocking state
[102189.935402] docker0: port 1(vethc0f2bb2) entered disabled state
[102189.935571] device vethc0f2bb2 entered promiscuous mode
[102189.935801] IPv6: ADDRCONF(NETDEV_UP): vethc0f2bb2: link is not ready
[102189.983129] docker0: port 1(vethc0f2bb2) entered disabled state
[102189.984497] device vethc0f2bb2 left promiscuous mode
[102189.984500] docker0: port 1(vethc0f2bb2) entered disabled state
[102420.725218] docker0: port 1(vethf7a9356) entered blocking state
[102420.725223] docker0: port 1(vethf7a9356) entered disabled state
[102420.725369] device vethf7a9356 entered promiscuous mode
[102420.725802] IPv6: ADDRCONF(NETDEV_UP): vethf7a9356: link is not ready
[102420.787138] docker0: port 1(vethf7a9356) entered disabled state
[102420.793497] device vethf7a9356 left promiscuous mode
[102420.793510] docker0: port 1(vethf7a9356) entered disabled state
[102470.352857] docker0: port 1(veth3debff2) entered blocking state
[102470.352862] docker0: port 1(veth3debff2) entered disabled state
[102470.353023] device veth3debff2 entered promiscuous mode
[102470.353232] IPv6: ADDRCONF(NETDEV_UP): veth3debff2: link is not ready
[102470.397551] docker0: port 1(veth3debff2) entered disabled state
[102470.401418] device veth3debff2 left promiscuous mode
[102470.401426] docker0: port 1(veth3debff2) entered disabled state
[103501.397573] docker0: port 1(vethf700f85) entered blocking state
[103501.397577] docker0: port 1(vethf700f85) entered disabled state
[103501.397717] device vethf700f85 entered promiscuous mode
[103501.397936] IPv6: ADDRCONF(NETDEV_UP): vethf700f85: link is not ready
[103501.441347] docker0: port 1(vethf700f85) entered disabled state
[103501.442558] device vethf700f85 left promiscuous mode
[103501.442561] docker0: port 1(vethf700f85) entered disabled state
[104264.571586] docker0: port 1(veth8f8e100) entered blocking state
[104264.571594] docker0: port 1(veth8f8e100) entered disabled state
[104264.571790] device veth8f8e100 entered promiscuous mode
[104264.574052] IPv6: ADDRCONF(NETDEV_UP): veth8f8e100: link is not ready
[104264.619559] docker0: port 1(veth8f8e100) entered disabled state
[104264.620792] device veth8f8e100 left promiscuous mode
[104264.620795] docker0: port 1(veth8f8e100) entered disabled state
[104319.956360] docker0: port 1(veth91c095c) entered blocking state
[104319.956364] docker0: port 1(veth91c095c) entered disabled state
[104319.956489] device veth91c095c entered promiscuous mode
[104319.957024] IPv6: ADDRCONF(NETDEV_UP): veth91c095c: link is not ready
[104320.001132] docker0: port 1(veth91c095c) entered disabled state
[104320.002534] device veth91c095c left promiscuous mode
[104320.002537] docker0: port 1(veth91c095c) entered disabled state
[104521.102430] docker0: port 1(veth94b1168) entered blocking state
[104521.102436] docker0: port 1(veth94b1168) entered disabled state
[104521.102596] device veth94b1168 entered promiscuous mode
[104521.102797] IPv6: ADDRCONF(NETDEV_UP): veth94b1168: link is not ready
[104521.102803] docker0: port 1(veth94b1168) entered blocking state
[104521.102807] docker0: port 1(veth94b1168) entered forwarding state
[104521.103522] docker0: port 1(veth94b1168) entered disabled state
[104521.159315] docker0: port 1(veth94b1168) entered disabled state
[104521.166090] device veth94b1168 left promiscuous mode
[104521.166097] docker0: port 1(veth94b1168) entered disabled state
[104717.315488] docker0: port 1(vetha728347) entered blocking state
[104717.315493] docker0: port 1(vetha728347) entered disabled state
[104717.315680] device vetha728347 entered promiscuous mode
[104717.315886] IPv6: ADDRCONF(NETDEV_UP): vetha728347: link is not ready
[104717.366492] docker0: port 1(vetha728347) entered disabled state
[104717.370297] device vetha728347 left promiscuous mode
[104717.370306] docker0: port 1(vetha728347) entered disabled state
[104794.872251] docker0: port 1(veth1569e07) entered blocking state
[104794.872255] docker0: port 1(veth1569e07) entered disabled state
[104794.872377] device veth1569e07 entered promiscuous mode
[104794.872634] IPv6: ADDRCONF(NETDEV_UP): veth1569e07: link is not ready
[104795.128924] eth0: renamed from veth72fe7cd
[104795.160857] IPv6: ADDRCONF(NETDEV_CHANGE): veth1569e07: link becomes ready
[104795.160986] docker0: port 1(veth1569e07) entered blocking state
[104795.160991] docker0: port 1(veth1569e07) entered forwarding state
[104795.626196] docker0: port 1(veth1569e07) entered disabled state
[104795.626240] veth72fe7cd: renamed from eth0
[104795.679697] docker0: port 1(veth1569e07) entered disabled state
[104795.681825] device veth1569e07 left promiscuous mode
[104795.681830] docker0: port 1(veth1569e07) entered disabled state
[104841.818210] docker0: port 1(veth665d874) entered blocking state
[104841.818216] docker0: port 1(veth665d874) entered disabled state
[104841.818395] device veth665d874 entered promiscuous mode
[104841.818772] IPv6: ADDRCONF(NETDEV_UP): veth665d874: link is not ready
[104841.866069] docker0: port 1(veth665d874) entered disabled state
[104841.869790] device veth665d874 left promiscuous mode
[104841.869800] docker0: port 1(veth665d874) entered disabled state
[104888.410871] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 37
[104906.038438] docker0: port 1(vethf15a803) entered blocking state
[104906.038439] docker0: port 1(vethf15a803) entered disabled state
[104906.038481] device vethf15a803 entered promiscuous mode
[104906.038537] IPv6: ADDRCONF(NETDEV_UP): vethf15a803: link is not ready
[104906.038539] docker0: port 1(vethf15a803) entered blocking state
[104906.038540] docker0: port 1(vethf15a803) entered forwarding state
[104906.042410] docker0: port 1(vethf15a803) entered disabled state
[104906.080912] docker0: port 1(vethf15a803) entered disabled state
[104906.082101] device vethf15a803 left promiscuous mode
[104906.082105] docker0: port 1(vethf15a803) entered disabled state
[104972.004066] docker0: port 1(vethd813cd7) entered blocking state
[104972.004072] docker0: port 1(vethd813cd7) entered disabled state
[104972.004273] device vethd813cd7 entered promiscuous mode
[104972.004539] IPv6: ADDRCONF(NETDEV_UP): vethd813cd7: link is not ready
[104972.049549] docker0: port 1(vethd813cd7) entered disabled state
[104972.051134] device vethd813cd7 left promiscuous mode
[104972.051138] docker0: port 1(vethd813cd7) entered disabled state
Driver information from
nvidia-smi -a==============NVSMI LOG==============
Timestamp : Thu Aug 1 16:42:50 2019
Driver Version : 430.34
CUDA Version : 10.1
Attached GPUs : 1
GPU 00000000:01:00.0
Product Name : GeForce GTX 1080 Ti
Product Brand : GeForce
Display Mode : Enabled
Display Active : Enabled
Persistence Mode : Disabled
Accounting Mode : Disabled
Accounting Mode Buffer Size : 4000
Driver Model
Current : N/A
Pending : N/A
Serial Number : 0321317150114
GPU UUID : GPU-de7e8698-487b-d7ec-a77f-1aa89b7f31ef
Minor Number : 0
VBIOS Version : 86.02.39.00.01
MultiGPU Board : No
Board ID : 0x100
GPU Part Number : 900-1G611-0050-000
Inforom Version
Image Version : G001.0000.01.04
OEM Object : 1.1
ECC Object : N/A
Power Management Object : N/A
GPU Operation Mode
Current : N/A
Pending : N/A
GPU Virtualization Mode
Virtualization mode : None
IBMNPU
Relaxed Ordering Mode : N/A
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x1B0610DE
Bus Id : 00000000:01:00.0
Sub System Id : 0x120F10DE
GPU Link Info
PCIe Generation
Max : 3
Current : 3
Link Width
Max : 16x
Current : 16x
Bridge Chip
Type : N/A
Firmware : N/A
Replays Since Reset : 0
Replay Number Rollovers : 0
Tx Throughput : 96000 KB/s
Rx Throughput : 449000 KB/s
Fan Speed : 32 %
Performance State : P0
Clocks Throttle Reasons
Idle : Active
Applications Clocks Setting : Not Active
SW Power Cap : Not Active
HW Slowdown : Not Active
HW Thermal Slowdown : Not Active
HW Power Brake Slowdown : Not Active
Sync Boost : Not Active
SW Thermal Slowdown : Not Active
Display Clock Setting : Not Active
FB Memory Usage
Total : 11177 MiB
Used : 151 MiB
Free : 11026 MiB
BAR1 Memory Usage
Total : 256 MiB
Used : 5 MiB
Free : 251 MiB
Compute Mode : Default
Utilization
Gpu : 3 %
Memory : 0 %
Encoder : 0 %
Decoder : 0 %
Encoder Stats
Active Sessions : 0
Average FPS : 0
Average Latency : 0
FBC Stats
Active Sessions : 0
Average FPS : 0
Average Latency : 0
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Retired Pages
Single Bit ECC : N/A
Double Bit ECC : N/A
Pending Page Blacklist : N/A
Temperature
GPU Current Temp : 59 C
GPU Shutdown Temp : 96 C
GPU Slowdown Temp : 93 C
GPU Max Operating Temp : N/A
Memory Current Temp : N/A
Memory Max Operating Temp : N/A
Power Readings
Power Management : Supported
Power Draw : 63.66 W
Power Limit : 250.00 W
Default Power Limit : 250.00 W
Enforced Power Limit : 250.00 W
Min Power Limit : 125.00 W
Max Power Limit : 300.00 W
Clocks
Graphics : 1480 MHz
SM : 1480 MHz
Memory : 5508 MHz
Video : 1252 MHz
Applications Clocks
Graphics : N/A
Memory : N/A
Default Applications Clocks
Graphics : N/A
Memory : N/A
Max Clocks
Graphics : 1911 MHz
SM : 1911 MHz
Memory : 5505 MHz
Video : 1620 MHz
Max Customer Boost Clocks
Graphics : N/A
Clock Policy
Auto Boost : N/A
Auto Boost Default : N/A
Processes
Process ID : 14718
Type : G
Name : /usr/lib/xorg/Xorg
Used GPU Memory : 149 MiB
Docker version from
docker versionClient: Docker Engine - Community
Version: 19.03.1
API version: 1.40
Go version: go1.12.5
Git commit: 74b1e89e8a
Built: Thu Jul 25 21:21:35 2019
OS/Arch: linux/amd64
Experimental: false
NVIDIA packages version from
dpkg -l '*nvidia*'orrpm -qa '*nvidia*'期望状态=未知(u)/安装(i)/删除(r)/清除(p)/保持(h)
| 状态=未安装(n)/已安装(i)/仅存配置(c)/仅解压缩(U)/配置失败(F)/不完全安装(H)/触发器等待(W)/触发器未决(T)
|/ 错误?=(无)/须重装(R) (状态，错误：大写=故障)
||/ 名称 版本 体系结构： 描述
+++-========================================-=========================-=========================-=====================================================================================
un nvidia-common <无> <无> (无可用描述)
un nvidia-libopencl1-dev <无> <无> (无可用描述)
un nvidia-prime <无> <无> (无可用描述)
NVIDIA container library version from
nvidia-container-cli -Vcommand not found: nvidia-container-cli
NVIDIA container library logs (see troubleshooting)
Docker command, image and tag used
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
50d5b4f6d9ff nvidia/cuda:9.0-base "nvidia-smi" 7 minutes ago Created pedantic_cannon
1afa77ec638d nvidia/cuda:9.0-base "nvidia-smi" 8 minutes ago Created eager_mahavira
1197d432da4a nvidia/cuda:9.0-base "nvidia-smi" 9 minutes ago Created hardcore_nobel
49cbf6bed9f5 nvidia/cuda:9.0-base "nvidia-smi" 11 minutes ago Created recursing_moser
67dd0a5eefe1 nvidia/cuda:10.1-base "nvidia-smi" 15 minutes ago Created hungry_wing
fed1e2ab13f8 nvidia/cuda:10.1-base "nvidia-smi" 18 minutes ago Created nice_neumann
i have tried all of those images,but i got the same issue:
docker: Error response from daemon: could not select device driver "" with capabilities: [[gpu]].
ERRO[0000] error waiting for container: context canceled
what should i do ? thank you so much!!!
The text was updated successfully, but these errors were encountered: