Described on the homepage: http://www.dynare.org/
Most users should use the precompiled package available for your OS, also available via the Dynare homepage: http://www.dynare.org/download/dynare-stable.
To contribute to Dynare and participate in the Dynare community, please see: CONTRIBUTING.md
Most of the source files are covered by the GNU General Public Licence version 3 or later (there are some exceptions to this, see license.txt in Dynare distribution for specifics).
Here, we explain how to build from source:
- Dynare, including preprocessor and MEX files for MATLAB and Octave
- Dynare++
- all the associated documentation (PDF and HTML)
This source can be retrieved in three forms:
- via git, at https://github.com/DynareTeam/dynare.git
- using the stable source archive of the latest Dynare version (currently 4.4) from http://www.dynare.org/download/dynare-stable/
- using a source snapshot of the unstable version, from http://www.dynare.org/download/dynare-unstable/source-snapshot
Note that if you obtain the source code via git, you will need to install more tools (see below).
The first section of this page gives general instructions, which apply to all platforms. Then some specific platforms are discussed.
NB: Here, when we refer to 32-bit or 64-bit, we refer to the type of MATLAB installation, not the type of Windows installation. It is perfectly possible to run a 32-bit MATLAB on a 64-bit Windows: in that case, instructions for Windows 32-bit should be followed. To determine the type of your MATLAB installation, type:
>> computer
at the MATLAB prompt: if it returns PCWIN
, then you have a 32-bit MATLAB; if it returns PCWIN64
, then you have a 64-bit MATLAB.
Contents
A number of tools and libraries are needed in order to recompile everything. You don't necessarily need to install everything, depending on what you want to compile.
- A POSIX compliant shell and an implementation of Make (mandatory)
- The GNU Compiler Collection, with gcc, g++ and gfortran (mandatory)
- MATLAB (if you want to compile MEX for MATLAB)
- GNU Octave, with the development headers (if you want to compile MEX for Octave)
- Boost libraries, version 1.36 or later
- Bison, version 2.5 or later (only if you get the source through Git)
- Flex, version 2.5.4 or later (only if you get the source through Git)
- Autoconf, version 2.62 or later (only if you get the source through Git) (see Installing an updated version of Autoconf in your own directory, in GNU/Linux)
- Automake, version 1.11.2 or later (only if you get the source through Git) (see Installing an updated version of AutoMake in your own directory, in GNU/Linux)
- CWEB, with its tools
ctangle
andcweave
(only if you want to build Dynare++ and get the source through Git) - An implementation of BLAS and LAPACK: either ATLAS, OpenBLAS, Netlib (BLAS, LAPACK) or MKL (only if you want to build Dynare++)
- An implementation of POSIX Threads (optional, for taking advantage of multi-core)
- MAT File I/O library (if you want to compile Markov-Switching code, the estimation DLL, k-order DLL and Dynare++)
- SLICOT (if you want to compile the Kalman steady state DLL)
- GSL library (if you want to compile Markov-Switching code)
- A decent LaTeX distribution (if you want to compile PDF documentation). The following extra components may be needed:
- For building the reference manual:
- GNU Texinfo
- Texi2HTML and Latex2HTML, if you want nice mathematical formulas in HTML output
- Doxygen (if you want to build Dynare preprocessor source documentation)
- For Octave, the development libraries corresponding to the UMFPACK packaged with Octave
If you have downloaded the sources from an official source archive or the source snapshot, just unpack it.
If you want to use Git, do the following from a terminal:
git clone --recursive http://github.com/DynareTeam/dynare.git
cd dynare
autoreconf -si
The last line runs Autoconf and Automake in order to prepare the build environment (this is not necessary if you got the sources from an official source archive or the source snapshot).
Simply launch the configure script from a terminal:
./configure
If you have MATLAB, you need to indicate both the MATLAB location and version. For example, on GNU/Linux:
./configure --with-matlab=/usr/local/MATLAB/R2013a MATLAB_VERSION=8.1
Note that the MATLAB version can also be specified via the MATLAB family product release (R2009a, R2008b, ...).
NB: For MATLAB versions strictly older than 7.1, you need to explicitly give the MEX extension, via MEXEXT
variable of the configure script (for example, MEXEXT=dll
for Windows with MATLAB < 7.1).
Alternatively, you can disable the compilation of MEX files for MATLAB with the --disable-matlab
flag, and MEX files for Octave with --disable-octave
.
You may need to specify additional options to the configure script, see the platform specific instructions below.
Note that if you don't want to compile the C/C++ programs with debugging information, you can specify the CFLAGS
and CXXFLAGS
variables to the configure script, such as:
./configure CFLAGS="-O3" CXXFLAGS="-O3"
To remove debugging information for Matlab mex functions, the analagous call would be:
./configure MATLAB_MEX_CFLAGS="-O3" MATLAB_MEX_CXXFLAGS="-O3"
If you want to give a try to the parallelized versions of some mex files (A_times_B_kronecker_C
and sparse_hessian_times_B_kronecker_C
used to get the reduced form of the second order approximation of the model) you can add the --enable-openmp
flag, for instance:
./configure --with-matlab=/usr/local/matlab78 MATLAB_VERSION=7.8 --enable-openmp
If the configuration goes well, the script will tell you which components are correctly configured and will be built.
Binaries and Info documentation are built with:
make
PDF and HTML documentation are respectively built with:
make pdf
make html
The testsuites can be run with:
make check
All the prerequisites are packaged.
The easiest way to install the pre-requisites in Debian is to use Debian's dynare package and do:
apt-get build-dep dynare
Alternatively, if you want to build everything, manually install the following packages:
build-essential
(for gcc, g++ and make)gfortran
liboctave-dev
oroctave3.2-headers
(will install ATLAS)libboost-graph-dev
libgsl0-dev
libmatio-dev
libslicot-dev
andlibslicot-pic
libsuitesparse-dev
flex
bison
autoconf
automake
texlive
texlive-publishers
(for Econometrica bibliographic style)texlive-extra-utils
(for CWEB)texlive-formats-extra
(for Eplain)texlive-latex-extra
(for fullpage.sty)latex-beamer
texinfo
texi2html
,latex2html
doxygen
NB: Documentation still in progress…
octave-devel
boost-devel
gsl-devel
matio-devel
flex
bison
autoconf
automake
texlive
texinfo
texi2html
,latex2html
doxygen
We no longer support compilation on Windows. To use the unstable version of Dynare on a Windows system, please download it from the Dynare website.
- Install the Xcode Command Line Tools:
- Download "Command Line Tools (OS X 10.X) for Xcode," where 10.X corresponds to your OS X version, from https://developer.apple.com/downloads/index.action
- Install the latest version of MacTeX
- Install Homebrew by following the instructions on the website
- Tap Homebrew Science by opening Terminal and typing:
brew tap homebrew/science
- (Optional) To compile Dynare mex files for use on Octave:
brew install octave
brew install suite-sparse
- To see the available options for compiling Dynare, type:
brew info dynare
- Install Dynare via a command of the form:
- (basic)
brew install dynare --HEAD --without-check
- (with Matlab mex)
brew install dynare --HEAD --without-check --with-matlab=/Applications/MATLAB_R2015a.app --with-matlab-version=8.5
- (basic)
- NB: If compiling Dynare documentation, add
--with-doc
to the installation command - NB: If not compiling Dynare mex files for Octave, add
--without-octave
to the installation command - NB: To compile the latest stable version of dynare, follow the same instructions as above, omitting the
--HEAD
argument - NB: To update a
--HEAD
install of dynare you need to uninstall it then install it again:brew uninstall dynare; brew install dynare --HEAD
. - NB: If you want to maintain a separate git directory of dynare, you can do a
--HEAD
install of dynare, then uninstall it. This will have the effect of bringing in all the dependencies you will need to then compile dynare from your git directory. Then, change to the git directory and type:autoreconf -si; ./configure --with-matlab=/Applications/MATLAB_R2015a.app MATLAB_VERSION=R2015a
, adjusting the Matlab path and version to accord with your version
- Once compilation is done, open Matlab and type the last line shown when you type
brew info dynare
in the Terminal window. With the typical Homebrew setup, this is:addpath /usr/local/opt/dynare/lib/dynare/matlab