boot_c2.ini

#Modifcations to /boot/* files, will not be saved when powered on.
#Please ensure you edit from the DietPi-RamDisk location /DietPi/*

ODROIDC2-UBOOT-CONFIG

#Resolution + Refresh rate
setenv m "720p60hz"

# HDMI BPP Mode
setenv m_bpp "32"

# HDMI DVI/VGA modes
# Uncomment only a single Line! The line with setenv written.
# At least one mode must be selected. (no true ;) )
# setenv vout "dvi"
# setenv vout "vga"

# HDMI HotPlug Detection control
# Allows you to force HDMI thinking that the cable is connected.
# true = HDMI will believe that cable is always connected
# false = will let board/monitor negotiate the connection status
setenv hpd "true"
# setenv hpd "false"

# Default Console Device Setting
setenv condev "console=tty0"

# Meson Timer
# 1 - Meson Timer
# 0 - Arch Timer
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
setenv mesontimer "1"

# Server Mode (aka. No Graphics)
# Setting nographics to 1 will disable all video subsystem
# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
setenv nographics "0"

###########################################

# Boot Arguments
setenv bootargs "root=/dev/mmcblk0p2 rootwait ro ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd}"

# Booting

setenv loadaddr "0x11000000"
setenv dtb_loadaddr "0x1000000"
setenv initrd_loadaddr "0x13000000"

fatload mmc 0:1 ${initrd_loadaddr} uInitrd
fatload mmc 0:1 ${loadaddr} Image
fatload mmc 0:1 ${dtb_loadaddr} meson64_odroidc2.dtb
fdt addr ${dtb_loadaddr}

if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}" = "1"; then fdt rm /timer; fi

if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi

booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}