Skip to content

Latest commit

 

History

History
26 lines (22 loc) · 1.75 KB

BRANCH_SYSTEM.md

File metadata and controls

26 lines (22 loc) · 1.75 KB
Raw

Steps to use the DietPi "beta" branch

This is the pre-release branch for public testing and may potentially be unstable.

The goal of the Beta branch, is to allow for public testing of our next release. Once testing has passed, and, all issues have been resolved, the Beta branch will then be set live on our stable branch (master). We will apply updates to the Beta branch during pre-release phases, you will then see an update notification. By running dietpi-update, your Beta version will then update to the latest.

By joining the Beta and reporting issues, you will be assisting DietPi (and all our users) to ensure stablity before stable release.

Beta on Fresh image:

  1. Write the DietPi image to SD card.
  2. Open the file on the 1st partition /boot/dietpi.txt
  3. Change DEV_GITBRANCH=master to DEV_GITBRANCH=beta (located at the bottom of file)
  4. Save the file, eject media and power on.

Beta on an existing installation:

  1. Recommended: Backup your system with dietpi-backup (or backup quickly with dietpi-backup 1)
  2. Run the following command to switch to 'beta' branch:
G_CONFIG_INJECT 'DEV_GITBRANCH=' 'DEV_GITBRANCH=beta' /DietPi/dietpi.txt
  1. Run dietpi-update to update the system, then reboot.
  2. Test away, please report any issues on our GitHub page. Also ensure you mention "Beta branch" in your post: https://github.com/MichaIng/DietPi/issues
  3. If you want to return the system to the previous restore state, run dietpi-backup to restore (or restore quickly with dietpi-backup -1)

Steps to use the DietPi "dev" branch

This is the active development branch. Its potentially unstable, unsupported and should not be used by end users.

  1. Same as above, however, use DEV_GITBRANCH=dev instead