🔥 Remove JyersUI

Marlin/Configuration.h

@@ -3064,7 +3064,6 @@
 //
 //#define DWIN_CREALITY_LCD           // Creality UI
 //#define DWIN_LCD_PROUI              // Pro UI by MRiscoC
-//#define DWIN_CREALITY_LCD_JYERSUI   // Jyers UI by Jacob Myers
 //#define DWIN_MARLINUI_PORTRAIT      // MarlinUI (portrait orientation)
 //#define DWIN_MARLINUI_LANDSCAPE     // MarlinUI (landscape orientation)
 

Marlin/Configuration_adv.h

@@ -1335,7 +1335,7 @@
 
 #endif // HAS_MARLINUI_MENU
 
-#if ANY(HAS_DISPLAY, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+#if EITHER(HAS_DISPLAY, DWIN_LCD_PROUI)
   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
   #define SOUND_ON_DEFAULT    // Buzzer/speaker default enabled state
 #endif

Marlin/src/MarlinCore.cpp

@@ -76,8 +76,6 @@
     #include "lcd/e3v2/creality/dwin.h"
   #elif ENABLED(DWIN_LCD_PROUI)
     #include "lcd/e3v2/proui/dwin.h"
-  #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-    #include "lcd/e3v2/jyersui/dwin.h"
   #endif
 #endif
 

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -51,8 +51,6 @@
   #include "../../../lcd/e3v2/creality/dwin.h"
 #elif ENABLED(DWIN_LCD_PROUI)
   #include "../../../lcd/e3v2/proui/dwin.h"
-#elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-  #include "../../../lcd/e3v2/jyersui/dwin.h"
 #endif
 
 #if HAS_MULTI_HOTEND

Marlin/src/gcode/config/M575.cpp

@@ -26,10 +26,6 @@
 
 #include "../gcode.h"
 
-#if ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-  #include "../../lcd/e3v2/jyersui/dwin.h"
-#endif
-
 /**
  * M575 - Change serial baud rate
  *
@@ -69,10 +65,7 @@ void GcodeSuite::M575() {
 
       SERIAL_FLUSH();
 
-      if (set1) {
-        MYSERIAL1.end(); MYSERIAL1.begin(baud);
-        TERN_(DWIN_CREALITY_LCD_JYERSUI, eeprom_settings.Baud115k = (baud == 115200));
-      }
+      if (set1) { MYSERIAL1.end(); MYSERIAL1.begin(baud); }
       #if HAS_MULTI_SERIAL
         if (set2) { MYSERIAL2.end(); MYSERIAL2.begin(baud); }
         #ifdef SERIAL_PORT_3

Marlin/src/gcode/control/M997.cpp

@@ -26,8 +26,6 @@
 
 #if ENABLED(DWIN_LCD_PROUI)
   #include "../../lcd/e3v2/proui/dwin.h"
-#elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-  #include "../../lcd/e3v2/jyersui/dwin.h"
 #endif
 
 /**
@@ -36,7 +34,6 @@
 void GcodeSuite::M997() {
 
   TERN_(DWIN_LCD_PROUI, DWIN_RebootScreen());
-  TERN_(DWIN_CREALITY_LCD_JYERSUI, CrealityDWIN.DWIN_RebootScreen());
 
   flashFirmware(parser.intval('S'));
 

Marlin/src/gcode/feature/powerloss/M1000.cpp

@@ -35,8 +35,6 @@
   #include "../../../lcd/e3v2/creality/dwin.h"
 #elif ENABLED(DWIN_LCD_PROUI)
   #include "../../../lcd/e3v2/proui/dwin.h"
-#elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-  #include "../../../lcd/e3v2/jyersui/dwin.h" // Temporary fix until it can be better implemented
 #endif
 
 #define DEBUG_OUT ENABLED(DEBUG_POWER_LOSS_RECOVERY)
@@ -71,8 +69,6 @@ void GcodeSuite::M1000() {
         ui.goto_screen(menu_job_recovery);
       #elif HAS_DWIN_E3V2_BASIC
         recovery.dwin_flag = true;
-      #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI) // Temporary fix until it can be better implemented
-        CrealityDWIN.Popup_Handler(Resume);
       #elif ENABLED(EXTENSIBLE_UI)
         ExtUI::onPowerLossResume();
       #else

Marlin/src/gcode/lcd/M0_M1.cpp

@@ -38,8 +38,6 @@
 #elif ENABLED(DWIN_LCD_PROUI)
   #include "../../lcd/e3v2/proui/dwin_popup.h"
   #include "../../lcd/e3v2/proui/dwin.h"
-#elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-  #include "../../lcd/e3v2/jyersui/dwin.h"
 #endif
 
 #if ENABLED(HOST_PROMPT_SUPPORT)
@@ -78,8 +76,6 @@ void GcodeSuite::M0_M1() {
       DWIN_Popup_Confirm(ICON_BLTouch, parser.string_arg, GET_TEXT_F(MSG_USERWAIT));
     else
       DWIN_Popup_Confirm(ICON_BLTouch, GET_TEXT_F(MSG_STOPPED), GET_TEXT_F(MSG_USERWAIT));
-  #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-    CrealityDWIN.Confirm_Handler(UserInput, parser.string_arg == nullptr);
   #else
 
     if (parser.string_arg) {

Marlin/src/gcode/probe/G30.cpp

@@ -33,7 +33,7 @@
   #include "../../feature/probe_temp_comp.h"
 #endif
 
-#if EITHER(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+#if ENABLED(DWIN_LCD_PROUI)
   #include "../../lcd/marlinui.h"
 #endif
 
@@ -53,7 +53,7 @@ void GcodeSuite::G30() {
                          parser.linearval('Y', current_position.y + probe.offset_xy.y) };
 
   if (!probe.can_reach(pos)) {
-    #if EITHER(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+    #if ENABLED(DWIN_LCD_PROUI)
       SERIAL_ECHOLNF(GET_EN_TEXT_F(MSG_ZPROBE_OUT));
       LCD_MESSAGE(MSG_ZPROBE_OUT);
     #endif
@@ -65,9 +65,7 @@ void GcodeSuite::G30() {
 
   remember_feedrate_scaling_off();
 
-  #if EITHER(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
-    process_subcommands_now(F("G28O"));
-  #endif
+  TERN_(DWIN_LCD_PROUI, process_subcommands_now(F("G28O")));
 
   const ProbePtRaise raise_after = parser.boolval('E', true) ? PROBE_PT_STOW : PROBE_PT_NONE;
 
@@ -76,7 +74,7 @@ void GcodeSuite::G30() {
   TERN_(HAS_PTC, ptc.set_enabled(true));
   if (!isnan(measured_z)) {
     SERIAL_ECHOLNPGM("Bed X: ", pos.x, " Y: ", pos.y, " Z: ", measured_z);
-    #if EITHER(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+    #if ENABLED(DWIN_LCD_PROUI)
       char msg[31], str_1[6], str_2[6], str_3[6];
       sprintf_P(msg, PSTR("X:%s, Y:%s, Z:%s"),
         dtostrf(pos.x, 1, 1, str_1),

Marlin/src/gcode/stats/M75-M78.cpp

@@ -33,23 +33,15 @@
   #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
-#if ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-  #include "../../lcd/e3v2/jyersui/dwin.h"
-#endif
-
 /**
  * M75: Start print timer
  */
 void GcodeSuite::M75() {
   startOrResumeJob();
-  TERN_(DWIN_LCD_PROUI, DWIN_Print_Started(false));
-  if (!IS_SD_PRINTING()) {
-    #if ENABLED(DWIN_LCD_PROUI)
-      DWIN_Print_Header(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
-    #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-      CrealityDWIN.Update_Print_Filename(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
-    #endif
-  }
+  #if ENABLED(DWIN_LCD_PROUI)
+    DWIN_Print_Started(false);
+    if (!IS_SD_PRINTING()) DWIN_Print_Header(parser.string_arg && parser.string_arg[0] ? parser.string_arg : GET_TEXT(MSG_HOST_START_PRINT));
+  #endif
 }
 
 /**

Marlin/src/gcode/temp/M303.cpp

@@ -32,8 +32,6 @@
   #include "../../lcd/extui/ui_api.h"
 #elif ENABLED(DWIN_LCD_PROUI)
   #include "../../lcd/e3v2/proui/dwin.h"
-#elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
-  #include "../../lcd/e3v2/jyersui/dwin.h"
 #endif
 
 /**
@@ -77,7 +75,6 @@ void GcodeSuite::M303() {
       SERIAL_ECHOLNPGM(STR_PID_BAD_HEATER_ID);
       TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_BAD_EXTRUDER_NUM));
       TERN_(DWIN_LCD_PROUI, DWIN_PidTuning(PID_BAD_EXTRUDER_NUM));
-      TERN_(DWIN_CREALITY_LCD_JYERSUI, CrealityDWINClass::DWIN_PidTuning(PID_BAD_EXTRUDER_NUM));
       return;
   }
 

Marlin/src/inc/Conditionals_LCD.h

@@ -477,8 +477,6 @@
 // Aliases for LCD features
 #if EITHER(DWIN_CREALITY_LCD, DWIN_LCD_PROUI)
   #define HAS_DWIN_E3V2_BASIC 1
-#endif
-#if EITHER(HAS_DWIN_E3V2_BASIC, DWIN_CREALITY_LCD_JYERSUI)
   #define HAS_DWIN_E3V2 1
 #endif
 #if ENABLED(DWIN_LCD_PROUI)
@@ -508,7 +506,7 @@
   #endif
 #endif
 
-#if ANY(HAS_WIRED_LCD, EXTENSIBLE_UI, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+#if ANY(HAS_WIRED_LCD, EXTENSIBLE_UI, DWIN_LCD_PROUI)
   #define HAS_DISPLAY 1
 #endif
 
@@ -528,7 +526,7 @@
   #define HAS_MANUAL_MOVE_MENU 1
 #endif
 
-#if ANY(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, IS_DWIN_MARLINUI, DWIN_CREALITY_LCD_JYERSUI)
+#if ANY(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, IS_DWIN_MARLINUI)
   #define CAN_SHOW_REMAINING_TIME 1
 #endif
 
@@ -1256,8 +1254,6 @@
 #endif
 #if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
   #define HAS_ABL_NOT_UBL 1
-#else
-  #undef PROBE_MANUALLY
 #endif
 #if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
   #define HAS_MESH 1
@@ -1276,11 +1272,14 @@
   #if DISABLED(AUTO_BED_LEVELING_UBL)
     #define PLANNER_LEVELING 1
   #endif
-#else
+#endif
+#if !HAS_LEVELING
   #undef RESTORE_LEVELING_AFTER_G28
   #undef ENABLE_LEVELING_AFTER_G28
   #undef G29_RETRY_AND_RECOVER
-  #undef PREHEAT_BEFORE_LEVELING
+#endif
+#if !HAS_LEVELING || EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
+  #undef PROBE_MANUALLY
 #endif
 #if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING)
   #define PROBE_SELECTED 1

Marlin/src/inc/Conditionals_post.h

@@ -3428,7 +3428,7 @@
  * Advanced Pause - Filament Change
  */
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #if ANY(HAS_MARLINUI_MENU, EXTENSIBLE_UI, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI) || BOTH(EMERGENCY_PARSER, HOST_PROMPT_SUPPORT)
+  #if ANY(HAS_MARLINUI_MENU, EXTENSIBLE_UI, DWIN_LCD_PROUI) || BOTH(EMERGENCY_PARSER, HOST_PROMPT_SUPPORT)
     #define M600_PURGE_MORE_RESUMABLE 1
   #endif
   #ifndef FILAMENT_CHANGE_SLOW_LOAD_LENGTH
@@ -3541,7 +3541,7 @@
   #ifndef MESH_MAX_Y
     #define MESH_MAX_Y _MESH_MAX_Y
   #endif
-#elif DISABLED(DWIN_CREALITY_LCD_JYERSUI)
+#else
   #undef MESH_MIN_X
   #undef MESH_MIN_Y
   #undef MESH_MAX_X

Marlin/src/inc/SanityCheck.h

@@ -873,7 +873,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
   #endif
 #elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
-  #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, DWIN_CREALITY_LCD, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI, DWIN_MARLINUI_*, OR EXTENSIBLE_UI."
+  #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, DWIN_CREALITY_LCD, DWIN_LCD_PROUI, DWIN_MARLINUI_*, OR EXTENSIBLE_UI."
 #endif
 
 #if ENABLED(USE_M73_REMAINING_TIME) && DISABLED(LCD_SET_PROGRESS_MANUALLY)
@@ -2846,7 +2846,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   + COUNT_ENABLED(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_TFT35) \
   + COUNT_ENABLED(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY, DGUS_LCD_UI_MKS, DGUS_LCD_UI_RELOADED) \
   + COUNT_ENABLED(ENDER2_STOCKDISPLAY, CR10_STOCKDISPLAY) \
-  + COUNT_ENABLED(DWIN_CREALITY_LCD, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI, DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE) \
+  + COUNT_ENABLED(DWIN_CREALITY_LCD, DWIN_LCD_PROUI, DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE) \
   + COUNT_ENABLED(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_GENERIC_12864_1_1) \
   + COUNT_ENABLED(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004) \
   + COUNT_ENABLED(MKS_12864OLED, MKS_12864OLED_SSD1306) \
@@ -3671,7 +3671,7 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
   #error "A very large BLOCK_BUFFER_SIZE is not needed and takes longer to drain the buffer on pause / cancel."
 #endif
 
-#if ENABLED(LED_CONTROL_MENU) && NONE(HAS_MARLINUI_MENU, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+#if ENABLED(LED_CONTROL_MENU) && NONE(HAS_MARLINUI_MENU, DWIN_LCD_PROUI)
   #error "LED_CONTROL_MENU requires an LCD controller that implements the menu."
 #endif
 

Marlin/src/lcd/e3v2/common/dwin_api.cpp

@@ -234,7 +234,7 @@ void DWIN_Frame_AreaMove(uint8_t mode, uint8_t dir, uint16_t dis,
 //  *string: The string
 //  rlimit: To limit the drawn string length
 void DWIN_Draw_String(bool bShow, uint8_t size, uint16_t color, uint16_t bColor, uint16_t x, uint16_t y, const char * const string, uint16_t rlimit/*=0xFFFF*/) {
-  #if NONE(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+  #if DISABLED(DWIN_LCD_PROUI)
     DWIN_Draw_Rectangle(1, bColor, x, y, x + (fontWidth(size) * strlen_P(string)), y + fontHeight(size));
   #endif
   constexpr uint8_t widthAdjust = 0;
@@ -266,9 +266,7 @@ void DWIN_Draw_String(bool bShow, uint8_t size, uint16_t color, uint16_t bColor,
 void DWIN_Draw_IntValue(uint8_t bShow, bool zeroFill, uint8_t zeroMode, uint8_t size, uint16_t color,
                           uint16_t bColor, uint8_t iNum, uint16_t x, uint16_t y, uint32_t value) {
   size_t i = 0;
-  #if DISABLED(DWIN_CREALITY_LCD_JYERSUI)
-    DWIN_Draw_Rectangle(1, bColor, x, y, x + fontWidth(size) * iNum + 1, y + fontHeight(size));
-  #endif
+  DWIN_Draw_Rectangle(1, bColor, x, y, x + fontWidth(size) * iNum + 1, y + fontHeight(size));
   DWIN_Byte(i, 0x14);
   // Bit 7: bshow
   // Bit 6: 1 = signed; 0 = unsigned number;
@@ -316,9 +314,7 @@ void DWIN_Draw_FloatValue(uint8_t bShow, bool zeroFill, uint8_t zeroMode, uint8_
                           uint16_t bColor, uint8_t iNum, uint8_t fNum, uint16_t x, uint16_t y, int32_t value) {
   //uint8_t *fvalue = (uint8_t*)&value;
   size_t i = 0;
-  #if DISABLED(DWIN_CREALITY_LCD_JYERSUI)
-    DWIN_Draw_Rectangle(1, bColor, x, y, x + fontWidth(size) * (iNum+fNum+1), y + fontHeight(size));
-  #endif
+  DWIN_Draw_Rectangle(1, bColor, x, y, x + fontWidth(size) * (iNum+fNum+1), y + fontHeight(size));
   DWIN_Byte(i, 0x14);
   DWIN_Byte(i, (bShow * 0x80) | (zeroFill * 0x20) | (zeroMode * 0x10) | size);
   DWIN_Word(i, color);