Enhanced routines for DWIN display on Ender3v2

Marlin/Configuration.h

@@ -2756,6 +2756,11 @@
 //
 //#define DWIN_CREALITY_LCD
 
+//
+// Ender-3 v2 OEM display, enhanced.
+//
+//#define DWIN_CREALITY_LCD_ENHANCED
+
 //
 // Ender-3 v2 OEM display with enhancements by Jacob Myers
 //

Marlin/src/MarlinCore.cpp

@@ -77,6 +77,9 @@
 #if ENABLED(DWIN_CREALITY_LCD)
   #include "lcd/e3v2/creality/dwin.h"
   #include "lcd/e3v2/creality/rotary_encoder.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "lcd/e3v2/enhanced/dwin.h"
+  #include "lcd/e3v2/enhanced/rotary_encoder.h"
 #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
   #include "lcd/e3v2/jyersui/dwin.h"
   #include "lcd/e3v2/jyersui/rotary_encoder.h"
@@ -849,7 +852,7 @@ void idle(bool no_stepper_sleep/*=false*/) {
   TERN_(USE_BEEPER, buzzer.tick());
 
   // Handle UI input / draw events
-  TERN(DWIN_CREALITY_LCD, DWIN_Update(), ui.update());
+  TERN(HAS_DWIN_E3V2_BASIC, DWIN_Update(), ui.update());
 
   // Run i2c Position Encoders
   #if ENABLED(I2C_POSITION_ENCODERS)
@@ -904,7 +907,7 @@ void kill(PGM_P const lcd_error/*=nullptr*/, PGM_P const lcd_component/*=nullptr
   // Echo the LCD message to serial for extra context
   if (lcd_error) { SERIAL_ECHO_START(); SERIAL_ECHOLNPGM_P(lcd_error); }
 
-  #if HAS_DISPLAY
+  #if EITHER(HAS_DISPLAY, DWIN_CREALITY_LCD_ENHANCED)
     ui.kill_screen(lcd_error ?: GET_TEXT(MSG_KILLED), lcd_component ?: NUL_STR);
   #else
     UNUSED(lcd_error); UNUSED(lcd_component);
@@ -1315,7 +1318,7 @@ void setup() {
   // UI must be initialized before EEPROM
   // (because EEPROM code calls the UI).
 
-  #if ENABLED(DWIN_CREALITY_LCD)
+  #if HAS_DWIN_E3V2_BASIC
     SETUP_RUN(DWIN_Startup());
   #else
     SETUP_RUN(ui.init());
@@ -1590,15 +1593,15 @@ void setup() {
     SERIAL_ECHO_TERNARY(err, "BL24CXX Check ", "failed", "succeeded", "!\n");
   #endif
 
-  #if ENABLED(DWIN_CREALITY_LCD)
+  #if HAS_DWIN_E3V2_BASIC
     Encoder_Configuration();
     HMI_Init();
     HMI_SetLanguageCache();
     HMI_StartFrame(true);
     DWIN_StatusChanged_P(GET_TEXT(WELCOME_MSG));
   #endif
 
-  #if HAS_SERVICE_INTERVALS && DISABLED(DWIN_CREALITY_LCD)
+  #if HAS_SERVICE_INTERVALS && !HAS_DWIN_E3V2_BASIC
     ui.reset_status(true);  // Show service messages or keep current status
   #endif
 

Marlin/src/feature/pause.cpp

@@ -53,6 +53,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 #include "../lcd/marlinui.h"
@@ -242,6 +244,7 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
 
     TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(GET_TEXT(MSG_FILAMENT_CHANGE_PURGE)));
     TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, GET_TEXT(MSG_FILAMENT_CHANGE_PURGE), CONTINUE_STR));
+    TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_Popup_Confirm(ICON_BLTouch, GET_TEXT(MSG_FILAMENT_CHANGE_PURGE), CONTINUE_STR));
     wait_for_user = true; // A click or M108 breaks the purge_length loop
     for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count)
       unscaled_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE);
@@ -265,7 +268,7 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
           // Show "Purge More" / "Resume" menu and wait for reply
           KEEPALIVE_STATE(PAUSED_FOR_USER);
           wait_for_user = false;
-          #if HAS_LCD_MENU
+          #if EITHER(HAS_LCD_MENU, DWIN_CREALITY_LCD_ENHANCED)
             ui.pause_show_message(PAUSE_MESSAGE_OPTION); // Also sets PAUSE_RESPONSE_WAIT_FOR
           #else
             pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
@@ -525,6 +528,8 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
 
       TERN_(EXTENSIBLE_UI, ExtUI::onStatusChanged_P(GET_TEXT(MSG_REHEATING)));
 
+      TERN_(DWIN_CREALITY_LCD_ENHANCED, ui.set_status_P(GET_TEXT(MSG_REHEATING)));
+
       // Re-enable the heaters if they timed out
       HOTEND_LOOP() thermalManager.reset_hotend_idle_timer(e);
 
@@ -538,8 +543,13 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
       const millis_t nozzle_timeout = SEC_TO_MS(PAUSE_PARK_NOZZLE_TIMEOUT);
 
       HOTEND_LOOP() thermalManager.heater_idle[e].start(nozzle_timeout);
+
       TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, GET_TEXT(MSG_REHEATDONE), CONTINUE_STR));
+
       TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(GET_TEXT(MSG_REHEATDONE)));
+
+      TERN_(DWIN_CREALITY_LCD_ENHANCED, ui.set_status_P(GET_TEXT(MSG_REHEATDONE)));
+
       wait_for_user = true;
       nozzle_timed_out = false;
 
@@ -675,6 +685,7 @@ void resume_print(const_float_t slow_load_length/*=0*/, const_float_t fast_load_
 
   TERN_(HAS_STATUS_MESSAGE, ui.reset_status());
   TERN_(HAS_LCD_MENU, ui.return_to_status());
+  TERN_(DWIN_CREALITY_LCD_ENHANCED, HMI_ReturnScreen());
 }
 
 #endif // ADVANCED_PAUSE_FEATURE

Marlin/src/feature/powerloss.cpp

@@ -40,7 +40,7 @@ uint8_t PrintJobRecovery::queue_index_r;
 uint32_t PrintJobRecovery::cmd_sdpos, // = 0
          PrintJobRecovery::sdpos[BUFSIZE];
 
-#if ENABLED(DWIN_CREALITY_LCD)
+#if HAS_DWIN_E3V2_BASIC
   bool PrintJobRecovery::dwin_flag; // = false
 #endif
 

Marlin/src/feature/powerloss.h

@@ -145,7 +145,7 @@ class PrintJobRecovery {
     static uint32_t cmd_sdpos,        //!< SD position of the next command
                     sdpos[BUFSIZE];   //!< SD positions of queued commands
 
-    #if ENABLED(DWIN_CREALITY_LCD)
+    #if HAS_DWIN_E3V2_BASIC
       static bool dwin_flag;
     #endif
 

Marlin/src/feature/runout.cpp

@@ -68,6 +68,8 @@ bool FilamentMonitorBase::enabled = true,
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 void event_filament_runout(const uint8_t extruder) {
@@ -86,6 +88,7 @@ void event_filament_runout(const uint8_t extruder) {
   #endif
 
   TERN_(EXTENSIBLE_UI, ExtUI::onFilamentRunout(ExtUI::getTool(extruder)));
+  TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_FilamentRunout(extruder));
 
   #if ANY(HOST_PROMPT_SUPPORT, HOST_ACTION_COMMANDS, MULTI_FILAMENT_SENSOR)
     const char tool = '0' + TERN0(MULTI_FILAMENT_SENSOR, extruder);

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -58,10 +58,10 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../../lcd/extui/ui_api.h"
-#endif
-
-#if ENABLED(DWIN_CREALITY_LCD)
+#elif ENABLED(DWIN_CREALITY_LCD)
   #include "../../../lcd/e3v2/creality/dwin.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 #if HAS_MULTI_HOTEND
@@ -403,10 +403,9 @@ G29_TYPE GcodeSuite::G29() {
     #if ENABLED(AUTO_BED_LEVELING_3POINT)
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> 3-point Leveling");
       points[0].z = points[1].z = points[2].z = 0;  // Probe at 3 arbitrary points
-    #endif
-
-    #if BOTH(AUTO_BED_LEVELING_BILINEAR, EXTENSIBLE_UI)
-      ExtUI::onMeshLevelingStart();
+    #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
+      TERN_(EXTENSIBLE_UI, ExtUI::onMeshLevelingStart());
+      TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_MeshLevelingStart());
     #endif
 
     if (!faux) {
@@ -886,9 +885,7 @@ G29_TYPE GcodeSuite::G29() {
     process_subcommands_now_P(PSTR(Z_PROBE_END_SCRIPT));
   #endif
 
-  #if ENABLED(DWIN_CREALITY_LCD)
-    DWIN_CompletedLeveling();
-  #endif
+  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_CompletedLeveling());
 
   report_current_position();
 

Marlin/src/gcode/bedlevel/mbl/G29.cpp

@@ -40,6 +40,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
@@ -191,6 +193,7 @@ void GcodeSuite::G29() {
       if (parser.seenval('Z')) {
         mbl.z_values[ix][iy] = parser.value_linear_units();
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ix, iy, mbl.z_values[ix][iy]));
+        TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_MeshUpdate(ix, iy, mbl.z_values[ix][iy]));
       }
       else
         return echo_not_entered('Z');

Marlin/src/gcode/bedlevel/ubl/M421.cpp

@@ -33,6 +33,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 /**
@@ -67,6 +69,7 @@ void GcodeSuite::M421() {
     float &zval = ubl.z_values[ij.x][ij.y];                               // Altering this Mesh Point
     zval = hasN ? NAN : parser.value_linear_units() + (hasQ ? zval : 0);  // N=NAN, Z=NEWVAL, or Q=ADDVAL
     TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ij.x, ij.y, zval));          // Ping ExtUI in case it's showing the mesh
+    TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_MeshUpdate(ij.x, ij.y, zval));
   }
 }
 

Marlin/src/gcode/calibrate/G28.cpp

@@ -46,12 +46,13 @@
 #endif
 
 #include "../../lcd/marlinui.h"
-#if ENABLED(DWIN_CREALITY_LCD)
-  #include "../../lcd/e3v2/creality/dwin.h"
-#endif
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD)
+  #include "../../lcd/e3v2/creality/dwin.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 #if HAS_L64XX                         // set L6470 absolute position registers to counts
@@ -238,7 +239,7 @@ void GcodeSuite::G28() {
     return;
   }
 
-  TERN_(DWIN_CREALITY_LCD, DWIN_StartHoming());
+  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_StartHoming());
   TERN_(EXTENSIBLE_UI, ExtUI::onHomingStart());
 
   planner.synchronize();          // Wait for planner moves to finish!
@@ -522,7 +523,7 @@ void GcodeSuite::G28() {
 
   ui.refresh();
 
-  TERN_(DWIN_CREALITY_LCD, DWIN_CompletedHoming());
+  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_CompletedHoming());
   TERN_(EXTENSIBLE_UI, ExtUI::onHomingComplete());
 
   report_current_position();

Marlin/src/gcode/control/M997.cpp

@@ -24,11 +24,17 @@
 
 #if ENABLED(PLATFORM_M997_SUPPORT)
 
+#if ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../lcd/e3v2/enhanced/dwin.h"
+#endif
+
 /**
  * M997: Perform in-application firmware update
  */
 void GcodeSuite::M997() {
 
+  TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_RebootScreen());
+
   flashFirmware(parser.intval('S'));
 
 }

Marlin/src/gcode/feature/powerloss/M1000.cpp

@@ -27,9 +27,14 @@
 #include "../../gcode.h"
 #include "../../../feature/powerloss.h"
 #include "../../../module/motion.h"
+
 #include "../../../lcd/marlinui.h"
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD)
+  #include "../../../lcd/e3v2/creality/dwin.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../../lcd/e3v2/enhanced/dwin.h"
 #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
   #include "../../../lcd/e3v2/jyersui/dwin.h" // Temporary fix until it can be better implemented
 #endif
@@ -64,7 +69,7 @@ void GcodeSuite::M1000() {
     if (parser.seen_test('S')) {
       #if HAS_LCD_MENU
         ui.goto_screen(menu_job_recovery);
-      #elif ENABLED(DWIN_CREALITY_LCD)
+      #elif HAS_DWIN_E3V2_BASIC
         recovery.dwin_flag = true;
       #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI) // Temporary fix until it can be better implemented
         CrealityDWIN.Popup_Handler(Resume);

Marlin/src/gcode/lcd/M0_M1.cpp

@@ -35,6 +35,8 @@
   #include "../../lcd/marlinui.h"
 #elif ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 #if ENABLED(HOST_PROMPT_SUPPORT)
@@ -68,6 +70,8 @@ void GcodeSuite::M0_M1() {
       ExtUI::onUserConfirmRequired(parser.string_arg); // Can this take an SRAM string??
     else
       ExtUI::onUserConfirmRequired_P(GET_TEXT(MSG_USERWAIT));
+  #elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+    DWIN_Popup_Confirm(ICON_BLTouch, parser.string_arg ?: GET_TEXT(MSG_STOPPED), GET_TEXT(MSG_USERWAIT));
   #else
 
     if (parser.string_arg) {

Marlin/src/gcode/lcd/M73.cpp

@@ -28,20 +28,34 @@
 #include "../../lcd/marlinui.h"
 #include "../../sd/cardreader.h"
 
+#if ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../lcd/e3v2/enhanced/dwin.h"
+#endif
+
 /**
  * M73: Set percentage complete (for display on LCD)
  *
  * Example:
  *   M73 P25 ; Set progress to 25%
  */
 void GcodeSuite::M73() {
-  if (parser.seenval('P'))
-    ui.set_progress((PROGRESS_SCALE) > 1
-      ? parser.value_float() * (PROGRESS_SCALE)
-      : parser.value_byte()
-    );
-  #if ENABLED(USE_M73_REMAINING_TIME)
-    if (parser.seenval('R')) ui.set_remaining_time(60 * parser.value_ulong());
+
+  #if ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+
+    DWIN_Progress_Update();
+
+  #else
+
+    if (parser.seenval('P'))
+      ui.set_progress((PROGRESS_SCALE) > 1
+        ? parser.value_float() * (PROGRESS_SCALE)
+        : parser.value_byte()
+      );
+
+    #if ENABLED(USE_M73_REMAINING_TIME)
+      if (parser.seenval('R')) ui.set_remaining_time(60 * parser.value_ulong());
+    #endif
+
   #endif
 }
 

Marlin/src/gcode/sd/M1001.cpp

@@ -48,6 +48,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
+  #include "../../lcd/e3v2/enhanced/dwin.h"
 #endif
 
 #if ENABLED(HOST_ACTION_COMMANDS)
@@ -106,6 +108,7 @@ void GcodeSuite::M1001() {
   #endif
 
   TERN_(EXTENSIBLE_UI, ExtUI::onPrintFinished());
+  TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_Print_Finished());
 
   // Re-select the last printed file in the UI
   TERN_(SD_REPRINT_LAST_SELECTED_FILE, ui.reselect_last_file());