-
-
Notifications
You must be signed in to change notification settings - Fork 19.3k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Number of steps does not match positon #7
Comments
Hallo, Kun je mij dit probleem eens laten zien in de praktijk. Ik zou graag eens zien hoe het in de praktijk gebruikt wordt. Dan kan ik een betere diagnose stellen. Groeten, Erik On Sep 12, 2011, at 10:05 PM, lampmaker wrote:
|
Hallo, Ik heb nog even naar de code gekeken. Groeten, Erik van der Zalm On Sep 12, 2011, at 10:05 PM, lampmaker wrote:
|
there is some rounding here: plan_set_position(...) and in void plan_buffer_line(float x, float y, float z, float e, float feed_rate) { target[X_AXIS] = lround(x_axis_steps_per_unit[X_AXIS]); you could also try to insert some serial debugging code here, to see if the calculated steps are actually allright:void calculate_trapezoid_for_block(block_t *block, float entry_speed, float exit_speed) { ... ...it would be nice to circle this problem also what could be a candidate:
e.g. line 2244 2251 ... I think this is the most probable candidate, as far as I understand the other code was taken from grml and is hopefully tested. greetings, |
Hi Erik, I modified the M114 command so it also returns the position based on the counted steps. I'll try Bernard's fork first and see if I have any issues there. |
I may have a bit more insight. The print I was having troubles with had a hole with (too) many small segments. (36 segments on a 4mm diameter) While printing the circumference speed droped significantly and it sounded more like sprinter. Running a print now with hexagon instead of the hole, and everything is perfectly fine. |
Als er te veel korte segmenten zijn dan kan de lookahead / serial interface het niet bij houden. Hij moet dan als het goed is terugvallen in een sprinter like mode. Ik moet bekijken of de seriele snelheid het probleem is. Of dat het probleem in de lookahead reken snelheid zit. Welke baudrate gebruik je? Groeten, Erik On Sep 13, 2011, at 10:28 AM, lampmaker wrote:
|
Baudrate is 115200 |
Have you tried increasing the precision on SFACT/Skeinforge? |
google translage:
Lampmaker: could you try to build the small test cube with no fill, and hex infill, and see if you have missed steps?
|
Here is what I did today (in between "real" work)
So it might indeed be related to some buffer underrun. However, I still On Tue, Sep 13, 2011 at 2:34 PM, bkubicek <
|
Kan you send me the G-code and configuration.h file? I will try to reproduce it. What host are you using? Best regards, Erik van der Zalm On Sep 13, 2011, at 7:21 PM, lampmaker wrote:
|
working on it right now as well: |
I did one very large & long print that came out perfectly fine. After that I M114 sends the position & count. Just make sure it is called after the last On Tue, Sep 13, 2011 at 7:35 PM, bkubicek <
|
I don't see the attached files. Can you also send the g-code which fails? On Sep 13, 2011, at 7:56 PM, lampmaker wrote:
|
the 400 mm/sec testcase of short x-axis moves does not loose steps for me: |
lampmaker, what acceleration are you using? And could you please mail a gcode file which exhibits the problems for you? |
I've located the source of the problem: (https://groups.google.com/forum/#!topic/ultimaker/ySmcYrVZT8E) when the block_buffer is emptied, steps are lost somewhere. Increasing the size of the block-buffer caused my problems for one print to go away |
Idea: maybe the error is not in handling the next buffer block,that could be possibly empty buffer, but in the calculation of the block thereafter, since the old buffer did deaccelerate to 0 velocity? |
Hello, I found a bug in the look ahead code. (A user with a RAMPS board found it.) The error gives a speed step. This is probably causing the missing steps. If fixed it in the non Ultimaker branches. Best regards, Erik ----- Original Message ----- I've located the source of the problem: (https://groups.google.com/forum/#!topic/ultimaker/ySmcYrVZT8E) when the block_buffer is emptied, steps are lost somewhere. Increasing the size of the block-buffer caused my problems for one print to go away Reply to this email directly or view it on GitHub: |
Either way, when the cause of the lost steps are found, we should still implement a feature to reduce speed when the buffer is starting to empty. Otherwise there will be blobs while it's waiting for new data. if ((blockcount<=2)&&(microseconds<50000)) microseconds=50000; |
awesome idea, lampmaker. However I think that a fixed time should only exist in the config.h. I have already started merging Erik possible fix into my personal git, however, its not an easy merge, because of the other differences in the code. |
Let me know when you're done, I'll add my stuff to it. I'll put the minimum On Fri, Sep 16, 2011 at 4:41 PM, bkubicek <
|
UltimakerErik has found something that obviously looks like a bug: if(abs(block->speed_x) > max_feedrate[X_AXIS]) { |
This is not a bug. This is limiting the axis speed to the max feedrate. It works as intended. (As far as I can tell) This will not cause any speed steps. Best regards, erik On Sep 16, 2011, at 6:50 PM, bkubicek wrote:
|
i think it is, in the original code the x axis is handled different. Maybe its a different bug, however... :
|
This is not a bug!!! It is handled different but it can be handled different because it is the fist axis we test. On Sep 17, 2011, at 9:32 AM, bkubicek wrote:
|
you are right. I have reverted this change in my code |
Annotate Bilby CNC thermistor (MarlinFirmware#7). Adjust extruder steps per mm.
…sion Provide both long and short version strings
Annotate Bilby CNC thermistor (MarlinFirmware#7). Adjust extruder steps per mm.
* # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message #2 will be skipped: # Update Configuration.h # The commit message #3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message #4 will be skipped: # Create Configuration.h # The commit message #5 will be skipped: # Delete Configuration.h # The commit message #6 will be skipped: # Create Test.h # The commit message #7 will be skipped: # Add files via upload # The commit message #8 will be skipped: # Delete Test.h # The commit message #9 will be skipped: # Delete Configuration.h # The commit message #10 will be skipped: # Delete Configuration_adv.h # The commit message #11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message #12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message #13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message #14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message #15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message #16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message #17 will be skipped: # Update boards.h # The commit message #18 will be skipped: # Update Makefile * Add Support for ADIMLab Granty * Optimize bootscreen * Update Makefile Updated Description * Update boards.h Updated Description * Update pins_HJC2560C_REV2.h Updated Description * Update Configuration.h Added Author + Custom_Machine_Name * Create _Bootscreen.h Add Bootscreen * Add files via upload Add ADIMLab Granty v1 * Update boards.h Add ADIMLab Granty v1 * Update Makefile Add ADIMLab Granty v1 * Update pins_HJC2560C_REV2.h * Consolidate Granty configs * config updates
commit d59d9b5 Author: Tanguy Pruvot <[email protected]> Date: Sun Sep 1 11:10:35 2019 +0200 Alfawise - LK1/LK2/LK4 and BLTouch (MarlinFirmware#15118) commit ee240d2 Author: weakset <[email protected]> Date: Sun Sep 1 12:04:40 2019 +0300 Use Flash-based EEPROM on SKR mini-E3 (MarlinFirmware#15126) commit be051c8 Author: Jason Smith <[email protected]> Date: Sun Sep 1 02:00:20 2019 -0700 Fix Z_STEPPER_ALIGN_[XY] sanity error (MarlinFirmware#15124) commit ee444d7 Author: Tanguy Pruvot <[email protected]> Date: Sun Sep 1 04:10:50 2019 +0200 Fix SKRmini test required serial port(s) (MarlinFirmware#15117) commit c8e0967 Author: ETE-Design <[email protected]> Date: Sun Sep 1 03:54:36 2019 +0200 Gantry: Enable Filament Change (MarlinFirmware#15122) commit 8778e12 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 20:49:02 2019 -0500 Fix some missed misspellings commit 2747ab7 Author: thisiskeithb <[email protected]> Date: Sat Aug 31 18:46:10 2019 -0700 Ender-3 default TMC currents (MarlinFirmware#15115) commit 586b334 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 19:44:45 2019 -0500 Split up stepper indirection (MarlinFirmware#15111) commit 87b16ed Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 07:03:36 2019 -0500 Bring Configuration.h up to date commit 8fca850 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 07:00:35 2019 -0500 Patch early env rename commit 25cf7de Author: thisiskeithb <[email protected]> Date: Fri Aug 30 23:40:52 2019 -0700 Disable Tevo Tarantula Pro PIDTEMPBED (MarlinFirmware#15089) commit 66f1da7 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 01:06:22 2019 -0500 Use 'ui.' where possible commit 26fa085 Author: Robby Candra <[email protected]> Date: Sat Aug 31 10:49:24 2019 +0700 Add RGB565 Color Definitions for TFT (MarlinFirmware#15099) commit 9449201 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 23:29:59 2019 -0500 Add more platform Travis tests commit 0f4d3e1 Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 18:16:50 2019 -0500 Fix ESP32 "DISABLED" name conflict commit 1eeef30 Author: Scott Lahteine <[email protected]> Date: Fri Aug 30 19:14:43 2019 -0500 A single generate_click lambda commit c014f8d Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 31 01:15:04 2019 +0200 Fix STM32F1 SPI warning (gcc 8.2.1) (MarlinFirmware#15104) commit d068470 Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 31 00:46:09 2019 +0200 Prevent Linux min/max error (MarlinFirmware#15107) commit ba91bca Author: Bob Kuhn <[email protected]> Date: Fri Aug 30 17:39:45 2019 -0500 TMC SPI daisy chain support (experimental) (MarlinFirmware#15081) commit 0bcb644 Author: Scott Lahteine <[email protected]> Date: Fri Aug 30 16:09:57 2019 -0500 Revert _BV testing commit This reverts commit 9223261. commit 05ef9b2 Author: Scott Lahteine <[email protected]> Date: Fri Aug 30 14:44:39 2019 -0500 [cron] Bump distribution date commit 2aef83d Author: Scott Lahteine <[email protected]> Date: Tue Aug 27 20:28:42 2019 -0500 Add a PlatformIO hook to alter CXXFLAGS commit 23cffb2 Author: Scott Lahteine <[email protected]> Date: Tue Aug 27 20:50:48 2019 -0500 Add an env to get the Include Tree commit 9223261 Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 17:50:16 2019 -0500 Only define _BV in Marduino.h commit d25231a Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 17:06:18 2019 -0500 Spacing, defined(), #include tweaks commit 7ebfae2 Author: Karl Andersson <[email protected]> Date: Fri Aug 30 00:00:01 2019 +0200 Fix HAL_STM32 SPI regression (MarlinFirmware#15093) Reference: 0b47558 commit f5a1fab Author: thisiskeithb <[email protected]> Date: Thu Aug 29 14:57:56 2019 -0700 Clarify TMC2209 Sensitivity vs. Others (MarlinFirmware#15092) commit 3f77d6a Author: Ludy <[email protected]> Date: Thu Aug 29 23:05:22 2019 +0200 Fix expire_status warning (MarlinFirmware#15094) commit 38983fd Author: Robby Candra <[email protected]> Date: Thu Aug 29 13:19:07 2019 +0700 Add 'Back' Button for Touch TFT 320x240 (MarlinFirmware#15060) commit 8196ced Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 00:54:42 2019 -0500 Leave LCD_PINS_Dn defined for other uses Fix MarlinFirmware#14998 commit 0ebaea9 Author: AlexandrZloy <[email protected]> Date: Thu Aug 29 12:15:31 2019 +0700 Add stallGuard threshold for X2 (MarlinFirmware#15042) commit e1d65b8 Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 00:00:03 2019 -0500 [cron] Bump distribution date commit ca5da02 Author: Tanguy Pruvot <[email protected]> Date: Thu Aug 29 06:49:51 2019 +0200 dogm: u8g prototypes cleanup (MarlinFirmware#15082) commit a61c91a Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 21:28:21 2019 -0500 Use 'bugfix' branch of U8glib-HAL commit 1d8ad7c Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 21:21:38 2019 -0500 Safe changes from HAL cleanup commit 9596312 Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 08:12:18 2019 -0500 Patch a u8g include commit 7b99c26 Author: Scott Lahteine <[email protected]> Date: Mon Aug 26 17:52:11 2019 -0500 Fix FTDI_EVE_LIB platform includes commit 3ac76f0 Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 07:40:18 2019 -0500 Invariant Marlin bootscreen (MarlinFirmware#15057) commit b2a4b6f Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 19:07:13 2019 -0500 Don't use board url as override commit b8e4b99 Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 18:57:32 2019 -0500 Separate board website URL commit 6341aef Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 19:05:03 2019 -0500 Info menu tweak style commit 0f386d0 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 28 03:23:13 2019 -0600 Followup fixes to ExtUI (MarlinFirmware#15068) commit 081e450 Author: Luu Lac <[email protected]> Date: Wed Aug 28 04:20:28 2019 -0500 Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (MarlinFirmware#15069) commit ca084dc Author: Robby Candra <[email protected]> Date: Wed Aug 28 14:49:21 2019 +0700 Switch col vs row variable name (MarlinFirmware#15072) commit 604bdf0 Author: Giuliano Zaro <[email protected]> Date: Wed Aug 28 09:46:21 2019 +0200 Update Italian language (MarlinFirmware#15076) commit b7796bc Author: InsanityAutomation <[email protected]> Date: Wed Aug 28 01:51:01 2019 -0400 Disable steppers on M112 (MarlinFirmware#15065) And change verbiage to not refer to "Emergency Stop." commit 318356b Author: Scott Lahteine <[email protected]> Date: Mon Aug 26 00:00:07 2019 -0500 [cron] Bump distribution date commit d2f211c Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 20:52:07 2019 -0500 Gantry followup commit 9d12788 Author: ETE-Design <[email protected]> Date: Mon Aug 26 03:51:06 2019 +0200 ADIMLab Gantry - Spelling Correction (MarlinFirmware#15043) commit 1769f43 Author: thisiskeithb <[email protected]> Date: Sun Aug 25 02:47:02 2019 -0700 Fix CR-10/10S/Mini/5S Bed Thermistor Types (MarlinFirmware#15040) commit f218405 Author: InsanityAutomation <[email protected]> Date: Sun Aug 25 05:46:02 2019 -0400 Fix ExtUI invalid speed, timer (MarlinFirmware#15031) commit 1557656 Author: Daniel Callander <[email protected]> Date: Sun Aug 25 10:43:53 2019 +0100 Add warning when trying to use JD with kinematic systems (MarlinFirmware#15032) commit 7183a58 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 07:46:30 2019 -0500 Add EZBOARD PT100 pin commit c7825e6 Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 04:30:02 2019 -0500 Contrast over 63 assume 255 max This is closer to the prior behavior. commit 1461ee4 Author: Tim Moore <[email protected]> Date: Sun Aug 25 02:25:07 2019 -0700 Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (MarlinFirmware#15046) commit 9e9e578 Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 00:00:03 2019 -0500 [cron] Bump distribution date commit 8033bc8 Author: Tim Moore <[email protected]> Date: Sat Aug 24 17:50:04 2019 -0700 Turbo-back Info menu items (MarlinFirmware#15049) commit d6a1652 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 03:40:28 2019 -0500 New Language: Vietnamese (MarlinFirmware#13892) commit f6b604f Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 02:10:50 2019 -0500 Helper Script tweaks commit 7fbf40c Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 02:02:31 2019 -0500 Add command-check to get-bdf2u8g.sh commit da601d5 Author: Marcio Teixeira <[email protected]> Date: Sat Aug 24 00:47:19 2019 -0600 Update USB_FLASH_DRIVE_SUPPORT (MarlinFirmware#15021) commit 20fc66f Merge: 7502569 334777c Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 01:45:11 2019 -0500 ADIMLab Granty v1 / v2 (MarlinFirmware#15017) * # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile * Add Support for ADIMLab Granty * Optimize bootscreen * Update Makefile Updated Description * Update boards.h Updated Description * Update pins_HJC2560C_REV2.h Updated Description * Update Configuration.h Added Author + Custom_Machine_Name * Create _Bootscreen.h Add Bootscreen * Add files via upload Add ADIMLab Granty v1 * Update boards.h Add ADIMLab Granty v1 * Update Makefile Add ADIMLab Granty v1 * Update pins_HJC2560C_REV2.h * Consolidate Granty configs * config updates commit 7502569 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 01:42:38 2019 -0500 Apply #ifdef commit d527c46 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 01:42:28 2019 -0500 Delta: Reduce default MIN_STEPS_PER_SEGMENT commit 848dd74 Author: BigTreeTech <[email protected]> Date: Sat Aug 24 14:33:16 2019 +0800 Fix STM32F1 ADC read temperature error (MarlinFirmware#15026) …after USB CDC connect. commit 04a9962 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 00:57:50 2019 -0500 Fix: Contrast override in pins files Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults. commit 334777c Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 00:24:48 2019 -0500 config updates commit 8c73017 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 00:00:04 2019 -0500 [cron] Bump distribution date commit 62d2a65 Author: Scott Lahteine <[email protected]> Date: Fri Aug 23 23:49:30 2019 -0500 Consolidate Granty configs commit 09ee5a5 Merge: 9d8e3d4 f2ad1ce Author: Scott Lahteine <[email protected]> Date: Fri Aug 23 23:45:37 2019 -0500 Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017 commit efeea9b Author: Tim Moore <[email protected]> Date: Fri Aug 23 20:30:11 2019 -0700 pca9632_buzz fix (MarlinFirmware#15020) commit e61e54a Author: Marcio Teixeira <[email protected]> Date: Fri Aug 23 21:29:00 2019 -0600 Fix TURBO_BACK_MENU_ITEM compile error (MarlinFirmware#15019) commit 0a280f0 Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 24 05:21:30 2019 +0200 Flag unused variables without buzzer (MarlinFirmware#15016) commit f2ad1ce Author: Scott Lahteine <[email protected]> Date: Fri Aug 23 20:59:37 2019 -0500 Update PT-BR commit 9c87786 Author: ManuelMcLure <[email protected]> Date: Fri Aug 23 18:55:41 2019 -0700 Change default Re-ARM UART pin order (MarlinFirmware#15037) commit fdef32c Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 18:17:13 2019 -0500 Shorten Website URLs commit 7924e0d Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 19:36:18 2019 -0500 Add print at position shortcuts commit 5c0e5c5 Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 18:01:10 2019 -0500 Fix boot screen warning commit dd6efe9 Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 18:56:59 2019 -0500 Restore documented M503 behavior commit 6429b8b Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 17:38:23 2019 -0500 Fix EZBoard platform test commit e604f76 Author: Tanguy Pruvot <[email protected]> Date: Thu Aug 22 01:56:39 2019 +0200 Enable contrast via LCD_CONTRAST_INIT (MarlinFirmware#15006) commit 9d8e3d4 Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:38:08 2019 +0200 Update pins_HJC2560C_REV2.h commit 2526e2d Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:36:15 2019 +0200 Update Makefile Add ADIMLab Granty v1 commit d858f44 Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:34:44 2019 +0200 Update boards.h Add ADIMLab Granty v1 commit c3d1671 Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:30:17 2019 +0200 Add files via upload Add ADIMLab Granty v1 commit 778466a Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:29:25 2019 +0200 Create _Bootscreen.h Add Bootscreen commit 42f3549 Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:33:36 2019 +0200 Update Configuration.h Added Author + Custom_Machine_Name commit 0309a5f Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:30:08 2019 +0200 Update pins_HJC2560C_REV2.h Updated Description commit 9434b81 Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:27:45 2019 +0200 Update boards.h Updated Description commit 6b35951 Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:26:25 2019 +0200 Update Makefile Updated Description commit 012f577 Author: Tanguy Pruvot <[email protected]> Date: Wed Aug 21 13:22:23 2019 +0200 STM32F1: Import (rogerclarkmelbourne) SPI class (MarlinFirmware#15002) commit 4be9822 Author: ETE-Design <[email protected]> Date: Wed Aug 21 12:33:17 2019 +0200 ADIMLab Granty pins/config (MarlinFirmware#14919) commit 1fb3c40 Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 05:30:33 2019 -0500 Optimize bootscreen commit f7aac7a Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 05:05:44 2019 -0500 Add Support for ADIMLab Granty commit de122c9 Author: ETE-Design <[email protected]> Date: Sat Aug 10 18:18:27 2019 +0200 # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile commit 4581957 Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 05:15:31 2019 -0500 Clean up some pins commit bd1ced1 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 21 03:48:06 2019 -0600 LulzBot Touch UI Followup (MarlinFirmware#15007) commit 8c2cfaa Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 23:45:38 2019 -0500 Fix BigTree_Btt002 build commit 69641f1 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 21 03:15:37 2019 -0600 Fix incompatible types error (MarlinFirmware#15009) commit 825c2c3 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 21 02:49:43 2019 -0600 Fix fan speed encoder scaling (MarlinFirmware#15010) commit f1942f6 Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 00:00:04 2019 -0500 [cron] Bump distribution date commit 5e77760 Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 19:37:03 2019 -0500 Add TURBO_BACK_MENU_ITEM option (MarlinFirmware#14991) commit 0cc524b Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 19:08:58 2019 -0500 Prevent BOARD_NAME conflict with env commit 33f6d77 Author: InsanityAutomation <[email protected]> Date: Tue Aug 20 04:44:52 2019 -0400 Adjust homing backoff feedrate (MarlinFirmware#14972) commit 5a7c021 Author: InsanityAutomation <[email protected]> Date: Tue Aug 20 04:44:17 2019 -0400 Misc. ExtUI fixes (MarlinFirmware#14971) commit 6039893 Author: InsanityAutomation <[email protected]> Date: Tue Aug 20 04:42:30 2019 -0400 Creality pins updates (MarlinFirmware#14979) commit 8664b8e Author: MaukCC <[email protected]> Date: Tue Aug 20 10:40:48 2019 +0200 Adding HMS434 machine (MarlinFirmware#14931) commit 5c6e827 Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 03:11:18 2019 -0500 Followup to STM32F407 commit 0b47558 Author: chzj333 <[email protected]> Date: Tue Aug 20 16:05:12 2019 +0800 New board STM32F407 (MarlinFirmware#14994) commit bb4a252 Author: BigTreeTech <[email protected]> Date: Tue Aug 20 16:02:52 2019 +0800 Fix Bigtreetech STM32F40x variants ADC (MarlinFirmware#14996) commit 67f8ba6 Author: Tim Moore <[email protected]> Date: Tue Aug 20 00:40:44 2019 -0700 Allow pullup/downs on power loss pin (MarlinFirmware#14986) commit 19e21a8 Author: thisiskeithb <[email protected]> Date: Tue Aug 20 00:38:31 2019 -0700 Wanhao Duplicator i3 Mini config updates (MarlinFirmware#14908) commit 05995d1 Author: Ludy <[email protected]> Date: Tue Aug 20 09:01:37 2019 +0200 Unify buzz methods as MarlinUI::buzz (MarlinFirmware#14803) commit 29c1290 Author: Scott Lahteine <[email protected]> Date: Mon Aug 19 02:28:12 2019 -0500 Minor HAL patches commit 1432d44 Author: Scott Lahteine <[email protected]> Date: Mon Aug 19 01:30:28 2019 -0500 Patch circleci config commit 94397db Author: Scott Lahteine <[email protected]> Date: Mon Aug 19 00:00:07 2019 -0500 [cron] Bump distribution date commit 17cd1a4 Author: Scott Lahteine <[email protected]> Date: Wed Aug 14 00:03:12 2019 -0500 Tweak TOUCH_MI_DEPLOY_XPOS block commit dfcd437 Author: Scott Lahteine <[email protected]> Date: Wed Aug 14 00:00:46 2019 -0500 Base HAS_LCD_CONTRAST on display type commit 3f678b0 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 23:37:15 2019 -0500 Remove some extra F4 conditions commit 4d1a662 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 23:24:55 2019 -0500 Fix STM32F7 STEPPER_ENABLE_PIN commit 08434b3 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 20:49:33 2019 -0500 Add TMC26XStepper, not ignore commit cd09e35 Author: Tim Moore <[email protected]> Date: Sun Aug 18 19:17:00 2019 -0700 Remove extra M503 "M412" report (MarlinFirmware#14985) commit c5be59d Author: InsanityAutomation <[email protected]> Date: Sun Aug 18 22:11:33 2019 -0400 Fix runout trigger on "inactive" sensor (MarlinFirmware#14990) commit af5a7a2 Author: InsanityAutomation <[email protected]> Date: Sun Aug 18 22:03:26 2019 -0400 Add missing ExtUI user confirmation (MarlinFirmware#14992) commit 33d54c0 Author: Robby Candra <[email protected]> Date: Mon Aug 19 09:00:21 2019 +0700 Remove extra defines (MarlinFirmware#14983) commit 403eefd Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 20:17:25 2019 -0500 Delete _Bootscreen.h commit bc93ac5 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 19:51:37 2019 -0500 Fix #define typo in configs commit d2072f9 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 19:36:14 2019 -0500 Clean up PlatformIO lib_ignore (MarlinFirmware#14988) Originally from MarlinFirmware#14832. Users may need to delete platformio work folders before building. commit c8e476a Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 18:33:56 2019 -0500 Embed some items in HAS_LCD_MENU commit 9a3ee3b Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 00:00:04 2019 -0500 [cron] Bump distribution date commit 9d9e2de Author: Scott Lahteine <[email protected]> Date: Sat Aug 17 20:14:14 2019 -0500 Tweak UBL G29 status print commit 823178c Author: Robby Candra <[email protected]> Date: Sun Aug 18 07:58:38 2019 +0700 Use u8g int type for screen coordinates (MarlinFirmware#14965) commit 6715fd1 Author: Ludy <[email protected]> Date: Sun Aug 18 01:40:01 2019 +0200 Animated Marlin boot screen (MarlinFirmware#14961) commit 9e49f15 Author: Scott Lahteine <[email protected]> Date: Sat Aug 17 15:47:17 2019 -0500 [cron] Bump distribution date commit 8bdb3d9 Author: Marcio Teixeira <[email protected]> Date: Fri Aug 16 20:57:19 2019 -0600 Add CONTROLLERFAN_SPEED_Z_ONLY (MarlinFirmware#14956) commit 587d4a6 Author: AnHardt <[email protected]> Date: Sat Aug 17 04:17:10 2019 +0200 Repair display throttling (MarlinFirmware#14960) commit fecf808 Author: J.C. Nelson <[email protected]> Date: Fri Aug 16 19:15:27 2019 -0700 Fix lambda missing capture (MarlinFirmware#14969) commit 66bfad3 Author: Bob Kuhn <[email protected]> Date: Fri Aug 16 20:06:32 2019 -0500 Fix missing U8glib.h include (MarlinFirmware#14966) commit 1bcc5c9 Author: J.C. Nelson <[email protected]> Date: Fri Aug 16 18:02:35 2019 -0700 MalyanLCD: Pause, resume, more ExtUI (MarlinFirmware#14852) commit c3ff53a Author: Scott Lahteine <[email protected]> Date: Fri Aug 16 18:47:51 2019 -0500 STM32 u8g defines Suggested by MarlinFirmware#14742 (comment) commit 4575978 Author: Tim Moore <[email protected]> Date: Fri Aug 16 16:42:24 2019 -0700 Fix auto power for chamber fan (MarlinFirmware#14922) commit 274934a Author: Marcio Teixeira <[email protected]> Date: Fri Aug 16 17:34:13 2019 -0600 Add LULZBOT_TOUCH_UI (MarlinFirmware#14967) commit 179d6c4 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 14 20:05:15 2019 -0600 Add STARTUP_SCRIPT option. M17 parity with M18. (MarlinFirmware#14953) commit 36dfbae Author: Marcio Teixeira <[email protected]> Date: Wed Aug 14 16:52:57 2019 -0600 Add missing function declaration (MarlinFirmware#14955) commit 263d7d3 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 14 16:52:14 2019 -0600 "SD card" => "Media" (MarlinFirmware#14951) commit 24ce8be Author: Scott Lahteine <[email protected]> Date: Wed Aug 14 00:00:11 2019 -0500 [cron] Bump distribution date commit 4cc1039 Author: Tanguy Pruvot <[email protected]> Date: Wed Aug 14 06:41:17 2019 +0200 Alfawise Flash EEPROM, Z Servo Probe (MarlinFirmware#14877) commit 0fbb26c Author: Joseph Bozarth <[email protected]> Date: Tue Aug 13 23:38:45 2019 -0500 M16 - Expected Printer Check (MarlinFirmware#14924) commit a26b57a Author: Scott Lahteine <[email protected]> Date: Tue Aug 13 19:38:54 2019 -0500 Minor pins cleanup commit 059f575 Author: Acenotass <[email protected]> Date: Wed Aug 14 06:19:44 2019 +0600 Update Russian language (MarlinFirmware#14940) commit a67830b Author: Timothy Hoogland <[email protected]> Date: Tue Aug 13 00:03:42 2019 -0500 TH3D EZBoard is LPC1769 (MarlinFirmware#14936) commit 03df3f4 Author: Tanguy Pruvot <[email protected]> Date: Tue Aug 13 02:50:34 2019 +0200 Fix Python scripts unhandled quotes (MarlinFirmware#14926) commit c6be989 Author: Tanguy Pruvot <[email protected]> Date: Tue Aug 13 02:48:46 2019 +0200 Store EEPROM config in flash (MarlinFirmware#14923) Avoid confusion between the 2 possible SDs... commit 13d8dc0 Author: Marcio Teixeira <[email protected]> Date: Sat Aug 10 18:25:30 2019 -0600 Fix incorrect print stat in ExtUI (MarlinFirmware#14881) commit dc21e2e Author: Marcio Teixeira <[email protected]> Date: Sat Aug 10 18:24:41 2019 -0600 Increase XY nozzle offset range (MarlinFirmware#14882) commit fa53384 Author: Marcio Teixeira <[email protected]> Date: Sat Aug 10 18:23:37 2019 -0600 Bury easter egg deeper (MarlinFirmware#14883) commit af4bcb6 Author: Giuliano Zaro <[email protected]> Date: Sun Aug 11 02:22:48 2019 +0200 SAMD51 typo fix (MarlinFirmware#14885) commit d7172a4 Author: Ludy <[email protected]> Date: Sun Aug 11 02:22:18 2019 +0200 Cleanup and conditions (MarlinFirmware#14886) commit 03dbe16 Author: Johnny Eshak <[email protected]> Date: Sun Aug 11 02:20:40 2019 +0200 Compiling M43 on invalid conversion (MarlinFirmware#14897) commit f085199 Author: Giuliano Zaro <[email protected]> Date: Sun Aug 11 02:19:52 2019 +0200 SAMD51: Some LCD pin fixes (MarlinFirmware#14915) commit d78086c Author: Giuliano Zaro <[email protected]> Date: Sun Aug 11 02:18:32 2019 +0200 SAMD51: Neopixel pin mapping (MarlinFirmware#14913) commit 9c5086e Author: Eric Ptak <[email protected]> Date: Sun Aug 11 02:14:31 2019 +0200 [STM32F1] Simpler Flash EEPROM (MarlinFirmware#14829) commit 0745d48 Author: Tanguy Pruvot <[email protected]> Date: Sun Aug 11 01:22:11 2019 +0200 Fix build with and without TOUCH_BUTTONS (MarlinFirmware#14912) commit e7aba49 Author: thisiskeithb <[email protected]> Date: Fri Aug 9 23:53:55 2019 -0700 Update PB5 to correct pin number (MarlinFirmware#14891) commit 5ea5d71 Author: thisiskeithb <[email protected]> Date: Fri Aug 9 23:52:26 2019 -0700 Tevo Michelangelo config updates (MarlinFirmware#14895) commit 5d2519e Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 10 08:45:36 2019 +0200 Allow use of Fysetc SoftwareSerialM (MarlinFirmware#14893) commit d2d71ca Author: Robby Candra <[email protected]> Date: Sat Aug 10 13:42:52 2019 +0700 Clean up Touch pins. Better up/down touch response. (MarlinFirmware#14900) commit 8cc0b4b Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 10 07:58:21 2019 +0200 Revert "Edit STEPS_PER_MM integer only" (MarlinFirmware#14909) This reverts commit 2d98bb3. commit 3129fd0 Author: Giuliano Zaro <[email protected]> Date: Sat Aug 10 07:56:55 2019 +0200 SAMD51: Update LCD pins (MarlinFirmware#14907) commit 9479ec3 Author: Ludy <[email protected]> Date: Sat Aug 10 07:53:26 2019 +0200 Fix Service Menu compile error (MarlinFirmware#14903) commit a7f1021 Author: Giuliano Zaro <[email protected]> Date: Sat Aug 10 00:00:20 2019 +0200 Fix SPI_ENDSTOPS compile error (MarlinFirmware#14906)
commit 12c595c Author: Giuliano Zaro <[email protected]> Date: Mon Sep 2 12:45:02 2019 +0200 SAMD51 LCD support (MarlinFirmware#15113) commit 23bb40d Author: Scott Lahteine <[email protected]> Date: Mon Sep 2 05:24:24 2019 -0500 Fix MKS_MINI_12864 init See MarlinFirmware#13550 Co-Authored-By: DrDitto <[email protected]> commit 9958f5e Author: Giuliano Zaro <[email protected]> Date: Mon Sep 2 09:44:48 2019 +0200 Home on G34 if steppers slept (MarlinFirmware#15127) commit 59152f2 Author: thisiskeithb <[email protected]> Date: Mon Sep 2 00:42:11 2019 -0700 Flash-based EEPROM on SKR Mini E3 DIP (MarlinFirmware#15128) commit c981710 Author: Tanguy Pruvot <[email protected]> Date: Mon Sep 2 09:40:33 2019 +0200 Update French language (MarlinFirmware#15129) commit e6a114b Author: Giuliano Zaro <[email protected]> Date: Mon Sep 2 09:39:40 2019 +0200 Update Italian language (MarlinFirmware#15130) commit b97bb14 Author: Tanguy Pruvot <[email protected]> Date: Mon Sep 2 09:37:50 2019 +0200 Full-featured Alfawise U20 config (MarlinFirmware#15131) commit 5406982 Author: Gustavo Alvarez <[email protected]> Date: Mon Sep 2 09:36:32 2019 +0200 Update Spanish language (MarlinFirmware#15132) commit f6505c8 Author: thisiskeithb <[email protected]> Date: Mon Sep 2 00:35:59 2019 -0700 Fix Ender-3 Status Screen Y Offset (MarlinFirmware#15136) commit 93dcc22 Author: Scott Lahteine <[email protected]> Date: Mon Sep 2 01:09:45 2019 -0500 Drop extra call to get_available_commands commit 451a942 Author: Scott Lahteine <[email protected]> Date: Mon Sep 2 01:04:00 2019 -0500 Suspend queue during wait_for_hotend commit b4715b2 Author: Scott Lahteine <[email protected]> Date: Mon Sep 2 00:00:04 2019 -0500 [cron] Bump distribution date commit 34b7342 Author: Scott Lahteine <[email protected]> Date: Sun Sep 1 23:54:41 2019 -0500 Apply #ifdef/#ifndef where possible commit 4078f26 Author: Scott Lahteine <[email protected]> Date: Sun Sep 1 23:43:38 2019 -0500 Apply shorthand option macros commit a2e412c Author: Scott Lahteine <[email protected]> Date: Sun Sep 1 20:21:11 2019 -0500 Rename command buffer var commit d59d9b5 Author: Tanguy Pruvot <[email protected]> Date: Sun Sep 1 11:10:35 2019 +0200 Alfawise - LK1/LK2/LK4 and BLTouch (MarlinFirmware#15118) commit ee240d2 Author: weakset <[email protected]> Date: Sun Sep 1 12:04:40 2019 +0300 Use Flash-based EEPROM on SKR mini-E3 (MarlinFirmware#15126) commit be051c8 Author: Jason Smith <[email protected]> Date: Sun Sep 1 02:00:20 2019 -0700 Fix Z_STEPPER_ALIGN_[XY] sanity error (MarlinFirmware#15124) commit ee444d7 Author: Tanguy Pruvot <[email protected]> Date: Sun Sep 1 04:10:50 2019 +0200 Fix SKRmini test required serial port(s) (MarlinFirmware#15117) commit c8e0967 Author: ETE-Design <[email protected]> Date: Sun Sep 1 03:54:36 2019 +0200 Gantry: Enable Filament Change (MarlinFirmware#15122) commit 8778e12 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 20:49:02 2019 -0500 Fix some missed misspellings commit 2747ab7 Author: thisiskeithb <[email protected]> Date: Sat Aug 31 18:46:10 2019 -0700 Ender-3 default TMC currents (MarlinFirmware#15115) commit 586b334 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 19:44:45 2019 -0500 Split up stepper indirection (MarlinFirmware#15111) commit 87b16ed Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 07:03:36 2019 -0500 Bring Configuration.h up to date commit 8fca850 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 07:00:35 2019 -0500 Patch early env rename commit 25cf7de Author: thisiskeithb <[email protected]> Date: Fri Aug 30 23:40:52 2019 -0700 Disable Tevo Tarantula Pro PIDTEMPBED (MarlinFirmware#15089) commit 66f1da7 Author: Scott Lahteine <[email protected]> Date: Sat Aug 31 01:06:22 2019 -0500 Use 'ui.' where possible commit 26fa085 Author: Robby Candra <[email protected]> Date: Sat Aug 31 10:49:24 2019 +0700 Add RGB565 Color Definitions for TFT (MarlinFirmware#15099) commit 9449201 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 23:29:59 2019 -0500 Add more platform Travis tests commit 0f4d3e1 Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 18:16:50 2019 -0500 Fix ESP32 "DISABLED" name conflict commit 1eeef30 Author: Scott Lahteine <[email protected]> Date: Fri Aug 30 19:14:43 2019 -0500 A single generate_click lambda commit c014f8d Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 31 01:15:04 2019 +0200 Fix STM32F1 SPI warning (gcc 8.2.1) (MarlinFirmware#15104) commit d068470 Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 31 00:46:09 2019 +0200 Prevent Linux min/max error (MarlinFirmware#15107) commit ba91bca Author: Bob Kuhn <[email protected]> Date: Fri Aug 30 17:39:45 2019 -0500 TMC SPI daisy chain support (experimental) (MarlinFirmware#15081) commit 0bcb644 Author: Scott Lahteine <[email protected]> Date: Fri Aug 30 16:09:57 2019 -0500 Revert _BV testing commit This reverts commit 9223261. commit 05ef9b2 Author: Scott Lahteine <[email protected]> Date: Fri Aug 30 14:44:39 2019 -0500 [cron] Bump distribution date commit 2aef83d Author: Scott Lahteine <[email protected]> Date: Tue Aug 27 20:28:42 2019 -0500 Add a PlatformIO hook to alter CXXFLAGS commit 23cffb2 Author: Scott Lahteine <[email protected]> Date: Tue Aug 27 20:50:48 2019 -0500 Add an env to get the Include Tree commit 9223261 Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 17:50:16 2019 -0500 Only define _BV in Marduino.h commit d25231a Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 17:06:18 2019 -0500 Spacing, defined(), #include tweaks commit 7ebfae2 Author: Karl Andersson <[email protected]> Date: Fri Aug 30 00:00:01 2019 +0200 Fix HAL_STM32 SPI regression (MarlinFirmware#15093) Reference: 0b47558 commit f5a1fab Author: thisiskeithb <[email protected]> Date: Thu Aug 29 14:57:56 2019 -0700 Clarify TMC2209 Sensitivity vs. Others (MarlinFirmware#15092) commit 3f77d6a Author: Ludy <[email protected]> Date: Thu Aug 29 23:05:22 2019 +0200 Fix expire_status warning (MarlinFirmware#15094) commit 38983fd Author: Robby Candra <[email protected]> Date: Thu Aug 29 13:19:07 2019 +0700 Add 'Back' Button for Touch TFT 320x240 (MarlinFirmware#15060) commit 8196ced Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 00:54:42 2019 -0500 Leave LCD_PINS_Dn defined for other uses Fix MarlinFirmware#14998 commit 0ebaea9 Author: AlexandrZloy <[email protected]> Date: Thu Aug 29 12:15:31 2019 +0700 Add stallGuard threshold for X2 (MarlinFirmware#15042) commit e1d65b8 Author: Scott Lahteine <[email protected]> Date: Thu Aug 29 00:00:03 2019 -0500 [cron] Bump distribution date commit ca5da02 Author: Tanguy Pruvot <[email protected]> Date: Thu Aug 29 06:49:51 2019 +0200 dogm: u8g prototypes cleanup (MarlinFirmware#15082) commit a61c91a Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 21:28:21 2019 -0500 Use 'bugfix' branch of U8glib-HAL commit 1d8ad7c Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 21:21:38 2019 -0500 Safe changes from HAL cleanup commit 9596312 Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 08:12:18 2019 -0500 Patch a u8g include commit 7b99c26 Author: Scott Lahteine <[email protected]> Date: Mon Aug 26 17:52:11 2019 -0500 Fix FTDI_EVE_LIB platform includes commit 3ac76f0 Author: Scott Lahteine <[email protected]> Date: Wed Aug 28 07:40:18 2019 -0500 Invariant Marlin bootscreen (MarlinFirmware#15057) commit b2a4b6f Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 19:07:13 2019 -0500 Don't use board url as override commit b8e4b99 Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 18:57:32 2019 -0500 Separate board website URL commit 6341aef Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 19:05:03 2019 -0500 Info menu tweak style commit 0f386d0 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 28 03:23:13 2019 -0600 Followup fixes to ExtUI (MarlinFirmware#15068) commit 081e450 Author: Luu Lac <[email protected]> Date: Wed Aug 28 04:20:28 2019 -0500 Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (MarlinFirmware#15069) commit ca084dc Author: Robby Candra <[email protected]> Date: Wed Aug 28 14:49:21 2019 +0700 Switch col vs row variable name (MarlinFirmware#15072) commit 604bdf0 Author: Giuliano Zaro <[email protected]> Date: Wed Aug 28 09:46:21 2019 +0200 Update Italian language (MarlinFirmware#15076) commit b7796bc Author: InsanityAutomation <[email protected]> Date: Wed Aug 28 01:51:01 2019 -0400 Disable steppers on M112 (MarlinFirmware#15065) And change verbiage to not refer to "Emergency Stop." commit 318356b Author: Scott Lahteine <[email protected]> Date: Mon Aug 26 00:00:07 2019 -0500 [cron] Bump distribution date commit d2f211c Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 20:52:07 2019 -0500 Gantry followup commit 9d12788 Author: ETE-Design <[email protected]> Date: Mon Aug 26 03:51:06 2019 +0200 ADIMLab Gantry - Spelling Correction (MarlinFirmware#15043) commit 1769f43 Author: thisiskeithb <[email protected]> Date: Sun Aug 25 02:47:02 2019 -0700 Fix CR-10/10S/Mini/5S Bed Thermistor Types (MarlinFirmware#15040) commit f218405 Author: InsanityAutomation <[email protected]> Date: Sun Aug 25 05:46:02 2019 -0400 Fix ExtUI invalid speed, timer (MarlinFirmware#15031) commit 1557656 Author: Daniel Callander <[email protected]> Date: Sun Aug 25 10:43:53 2019 +0100 Add warning when trying to use JD with kinematic systems (MarlinFirmware#15032) commit 7183a58 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 07:46:30 2019 -0500 Add EZBOARD PT100 pin commit c7825e6 Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 04:30:02 2019 -0500 Contrast over 63 assume 255 max This is closer to the prior behavior. commit 1461ee4 Author: Tim Moore <[email protected]> Date: Sun Aug 25 02:25:07 2019 -0700 Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (MarlinFirmware#15046) commit 9e9e578 Author: Scott Lahteine <[email protected]> Date: Sun Aug 25 00:00:03 2019 -0500 [cron] Bump distribution date commit 8033bc8 Author: Tim Moore <[email protected]> Date: Sat Aug 24 17:50:04 2019 -0700 Turbo-back Info menu items (MarlinFirmware#15049) commit d6a1652 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 03:40:28 2019 -0500 New Language: Vietnamese (MarlinFirmware#13892) commit f6b604f Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 02:10:50 2019 -0500 Helper Script tweaks commit 7fbf40c Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 02:02:31 2019 -0500 Add command-check to get-bdf2u8g.sh commit da601d5 Author: Marcio Teixeira <[email protected]> Date: Sat Aug 24 00:47:19 2019 -0600 Update USB_FLASH_DRIVE_SUPPORT (MarlinFirmware#15021) commit 20fc66f Merge: 7502569 334777c Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 01:45:11 2019 -0500 ADIMLab Granty v1 / v2 (MarlinFirmware#15017) * # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile * Add Support for ADIMLab Granty * Optimize bootscreen * Update Makefile Updated Description * Update boards.h Updated Description * Update pins_HJC2560C_REV2.h Updated Description * Update Configuration.h Added Author + Custom_Machine_Name * Create _Bootscreen.h Add Bootscreen * Add files via upload Add ADIMLab Granty v1 * Update boards.h Add ADIMLab Granty v1 * Update Makefile Add ADIMLab Granty v1 * Update pins_HJC2560C_REV2.h * Consolidate Granty configs * config updates commit 7502569 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 01:42:38 2019 -0500 Apply #ifdef commit d527c46 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 01:42:28 2019 -0500 Delta: Reduce default MIN_STEPS_PER_SEGMENT commit 848dd74 Author: BigTreeTech <[email protected]> Date: Sat Aug 24 14:33:16 2019 +0800 Fix STM32F1 ADC read temperature error (MarlinFirmware#15026) …after USB CDC connect. commit 04a9962 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 00:57:50 2019 -0500 Fix: Contrast override in pins files Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults. commit 334777c Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 00:24:48 2019 -0500 config updates commit 8c73017 Author: Scott Lahteine <[email protected]> Date: Sat Aug 24 00:00:04 2019 -0500 [cron] Bump distribution date commit 62d2a65 Author: Scott Lahteine <[email protected]> Date: Fri Aug 23 23:49:30 2019 -0500 Consolidate Granty configs commit 09ee5a5 Merge: 9d8e3d4 f2ad1ce Author: Scott Lahteine <[email protected]> Date: Fri Aug 23 23:45:37 2019 -0500 Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017 commit efeea9b Author: Tim Moore <[email protected]> Date: Fri Aug 23 20:30:11 2019 -0700 pca9632_buzz fix (MarlinFirmware#15020) commit e61e54a Author: Marcio Teixeira <[email protected]> Date: Fri Aug 23 21:29:00 2019 -0600 Fix TURBO_BACK_MENU_ITEM compile error (MarlinFirmware#15019) commit 0a280f0 Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 24 05:21:30 2019 +0200 Flag unused variables without buzzer (MarlinFirmware#15016) commit f2ad1ce Author: Scott Lahteine <[email protected]> Date: Fri Aug 23 20:59:37 2019 -0500 Update PT-BR commit 9c87786 Author: ManuelMcLure <[email protected]> Date: Fri Aug 23 18:55:41 2019 -0700 Change default Re-ARM UART pin order (MarlinFirmware#15037) commit fdef32c Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 18:17:13 2019 -0500 Shorten Website URLs commit 7924e0d Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 19:36:18 2019 -0500 Add print at position shortcuts commit 5c0e5c5 Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 18:01:10 2019 -0500 Fix boot screen warning commit dd6efe9 Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 18:56:59 2019 -0500 Restore documented M503 behavior commit 6429b8b Author: Scott Lahteine <[email protected]> Date: Thu Aug 22 17:38:23 2019 -0500 Fix EZBoard platform test commit e604f76 Author: Tanguy Pruvot <[email protected]> Date: Thu Aug 22 01:56:39 2019 +0200 Enable contrast via LCD_CONTRAST_INIT (MarlinFirmware#15006) commit 9d8e3d4 Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:38:08 2019 +0200 Update pins_HJC2560C_REV2.h commit 2526e2d Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:36:15 2019 +0200 Update Makefile Add ADIMLab Granty v1 commit d858f44 Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:34:44 2019 +0200 Update boards.h Add ADIMLab Granty v1 commit c3d1671 Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:30:17 2019 +0200 Add files via upload Add ADIMLab Granty v1 commit 778466a Author: ETE-Design <[email protected]> Date: Wed Aug 21 17:29:25 2019 +0200 Create _Bootscreen.h Add Bootscreen commit 42f3549 Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:33:36 2019 +0200 Update Configuration.h Added Author + Custom_Machine_Name commit 0309a5f Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:30:08 2019 +0200 Update pins_HJC2560C_REV2.h Updated Description commit 9434b81 Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:27:45 2019 +0200 Update boards.h Updated Description commit 6b35951 Author: ETE-Design <[email protected]> Date: Wed Aug 21 16:26:25 2019 +0200 Update Makefile Updated Description commit 012f577 Author: Tanguy Pruvot <[email protected]> Date: Wed Aug 21 13:22:23 2019 +0200 STM32F1: Import (rogerclarkmelbourne) SPI class (MarlinFirmware#15002) commit 4be9822 Author: ETE-Design <[email protected]> Date: Wed Aug 21 12:33:17 2019 +0200 ADIMLab Granty pins/config (MarlinFirmware#14919) commit 1fb3c40 Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 05:30:33 2019 -0500 Optimize bootscreen commit f7aac7a Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 05:05:44 2019 -0500 Add Support for ADIMLab Granty commit de122c9 Author: ETE-Design <[email protected]> Date: Sat Aug 10 18:18:27 2019 +0200 # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile commit 4581957 Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 05:15:31 2019 -0500 Clean up some pins commit bd1ced1 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 21 03:48:06 2019 -0600 LulzBot Touch UI Followup (MarlinFirmware#15007) commit 8c2cfaa Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 23:45:38 2019 -0500 Fix BigTree_Btt002 build commit 69641f1 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 21 03:15:37 2019 -0600 Fix incompatible types error (MarlinFirmware#15009) commit 825c2c3 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 21 02:49:43 2019 -0600 Fix fan speed encoder scaling (MarlinFirmware#15010) commit f1942f6 Author: Scott Lahteine <[email protected]> Date: Wed Aug 21 00:00:04 2019 -0500 [cron] Bump distribution date commit 5e77760 Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 19:37:03 2019 -0500 Add TURBO_BACK_MENU_ITEM option (MarlinFirmware#14991) commit 0cc524b Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 19:08:58 2019 -0500 Prevent BOARD_NAME conflict with env commit 33f6d77 Author: InsanityAutomation <[email protected]> Date: Tue Aug 20 04:44:52 2019 -0400 Adjust homing backoff feedrate (MarlinFirmware#14972) commit 5a7c021 Author: InsanityAutomation <[email protected]> Date: Tue Aug 20 04:44:17 2019 -0400 Misc. ExtUI fixes (MarlinFirmware#14971) commit 6039893 Author: InsanityAutomation <[email protected]> Date: Tue Aug 20 04:42:30 2019 -0400 Creality pins updates (MarlinFirmware#14979) commit 8664b8e Author: MaukCC <[email protected]> Date: Tue Aug 20 10:40:48 2019 +0200 Adding HMS434 machine (MarlinFirmware#14931) commit 5c6e827 Author: Scott Lahteine <[email protected]> Date: Tue Aug 20 03:11:18 2019 -0500 Followup to STM32F407 commit 0b47558 Author: chzj333 <[email protected]> Date: Tue Aug 20 16:05:12 2019 +0800 New board STM32F407 (MarlinFirmware#14994) commit bb4a252 Author: BigTreeTech <[email protected]> Date: Tue Aug 20 16:02:52 2019 +0800 Fix Bigtreetech STM32F40x variants ADC (MarlinFirmware#14996) commit 67f8ba6 Author: Tim Moore <[email protected]> Date: Tue Aug 20 00:40:44 2019 -0700 Allow pullup/downs on power loss pin (MarlinFirmware#14986) commit 19e21a8 Author: thisiskeithb <[email protected]> Date: Tue Aug 20 00:38:31 2019 -0700 Wanhao Duplicator i3 Mini config updates (MarlinFirmware#14908) commit 05995d1 Author: Ludy <[email protected]> Date: Tue Aug 20 09:01:37 2019 +0200 Unify buzz methods as MarlinUI::buzz (MarlinFirmware#14803) commit 29c1290 Author: Scott Lahteine <[email protected]> Date: Mon Aug 19 02:28:12 2019 -0500 Minor HAL patches commit 1432d44 Author: Scott Lahteine <[email protected]> Date: Mon Aug 19 01:30:28 2019 -0500 Patch circleci config commit 94397db Author: Scott Lahteine <[email protected]> Date: Mon Aug 19 00:00:07 2019 -0500 [cron] Bump distribution date commit 17cd1a4 Author: Scott Lahteine <[email protected]> Date: Wed Aug 14 00:03:12 2019 -0500 Tweak TOUCH_MI_DEPLOY_XPOS block commit dfcd437 Author: Scott Lahteine <[email protected]> Date: Wed Aug 14 00:00:46 2019 -0500 Base HAS_LCD_CONTRAST on display type commit 3f678b0 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 23:37:15 2019 -0500 Remove some extra F4 conditions commit 4d1a662 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 23:24:55 2019 -0500 Fix STM32F7 STEPPER_ENABLE_PIN commit 08434b3 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 20:49:33 2019 -0500 Add TMC26XStepper, not ignore commit cd09e35 Author: Tim Moore <[email protected]> Date: Sun Aug 18 19:17:00 2019 -0700 Remove extra M503 "M412" report (MarlinFirmware#14985) commit c5be59d Author: InsanityAutomation <[email protected]> Date: Sun Aug 18 22:11:33 2019 -0400 Fix runout trigger on "inactive" sensor (MarlinFirmware#14990) commit af5a7a2 Author: InsanityAutomation <[email protected]> Date: Sun Aug 18 22:03:26 2019 -0400 Add missing ExtUI user confirmation (MarlinFirmware#14992) commit 33d54c0 Author: Robby Candra <[email protected]> Date: Mon Aug 19 09:00:21 2019 +0700 Remove extra defines (MarlinFirmware#14983) commit 403eefd Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 20:17:25 2019 -0500 Delete _Bootscreen.h commit bc93ac5 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 19:51:37 2019 -0500 Fix #define typo in configs commit d2072f9 Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 19:36:14 2019 -0500 Clean up PlatformIO lib_ignore (MarlinFirmware#14988) Originally from MarlinFirmware#14832. Users may need to delete platformio work folders before building. commit c8e476a Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 18:33:56 2019 -0500 Embed some items in HAS_LCD_MENU commit 9a3ee3b Author: Scott Lahteine <[email protected]> Date: Sun Aug 18 00:00:04 2019 -0500 [cron] Bump distribution date commit 9d9e2de Author: Scott Lahteine <[email protected]> Date: Sat Aug 17 20:14:14 2019 -0500 Tweak UBL G29 status print commit 823178c Author: Robby Candra <[email protected]> Date: Sun Aug 18 07:58:38 2019 +0700 Use u8g int type for screen coordinates (MarlinFirmware#14965) commit 6715fd1 Author: Ludy <[email protected]> Date: Sun Aug 18 01:40:01 2019 +0200 Animated Marlin boot screen (MarlinFirmware#14961) commit 9e49f15 Author: Scott Lahteine <[email protected]> Date: Sat Aug 17 15:47:17 2019 -0500 [cron] Bump distribution date commit 8bdb3d9 Author: Marcio Teixeira <[email protected]> Date: Fri Aug 16 20:57:19 2019 -0600 Add CONTROLLERFAN_SPEED_Z_ONLY (MarlinFirmware#14956) commit 587d4a6 Author: AnHardt <[email protected]> Date: Sat Aug 17 04:17:10 2019 +0200 Repair display throttling (MarlinFirmware#14960) commit fecf808 Author: J.C. Nelson <[email protected]> Date: Fri Aug 16 19:15:27 2019 -0700 Fix lambda missing capture (MarlinFirmware#14969) commit 66bfad3 Author: Bob Kuhn <[email protected]> Date: Fri Aug 16 20:06:32 2019 -0500 Fix missing U8glib.h include (MarlinFirmware#14966) commit 1bcc5c9 Author: J.C. Nelson <[email protected]> Date: Fri Aug 16 18:02:35 2019 -0700 MalyanLCD: Pause, resume, more ExtUI (MarlinFirmware#14852) commit c3ff53a Author: Scott Lahteine <[email protected]> Date: Fri Aug 16 18:47:51 2019 -0500 STM32 u8g defines Suggested by MarlinFirmware#14742 (comment) commit 4575978 Author: Tim Moore <[email protected]> Date: Fri Aug 16 16:42:24 2019 -0700 Fix auto power for chamber fan (MarlinFirmware#14922) commit 274934a Author: Marcio Teixeira <[email protected]> Date: Fri Aug 16 17:34:13 2019 -0600 Add LULZBOT_TOUCH_UI (MarlinFirmware#14967) commit 179d6c4 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 14 20:05:15 2019 -0600 Add STARTUP_SCRIPT option. M17 parity with M18. (MarlinFirmware#14953) commit 36dfbae Author: Marcio Teixeira <[email protected]> Date: Wed Aug 14 16:52:57 2019 -0600 Add missing function declaration (MarlinFirmware#14955) commit 263d7d3 Author: Marcio Teixeira <[email protected]> Date: Wed Aug 14 16:52:14 2019 -0600 "SD card" => "Media" (MarlinFirmware#14951) commit 24ce8be Author: Scott Lahteine <[email protected]> Date: Wed Aug 14 00:00:11 2019 -0500 [cron] Bump distribution date commit 4cc1039 Author: Tanguy Pruvot <[email protected]> Date: Wed Aug 14 06:41:17 2019 +0200 Alfawise Flash EEPROM, Z Servo Probe (MarlinFirmware#14877) commit 0fbb26c Author: Joseph Bozarth <[email protected]> Date: Tue Aug 13 23:38:45 2019 -0500 M16 - Expected Printer Check (MarlinFirmware#14924) commit a26b57a Author: Scott Lahteine <[email protected]> Date: Tue Aug 13 19:38:54 2019 -0500 Minor pins cleanup commit 059f575 Author: Acenotass <[email protected]> Date: Wed Aug 14 06:19:44 2019 +0600 Update Russian language (MarlinFirmware#14940) commit a67830b Author: Timothy Hoogland <[email protected]> Date: Tue Aug 13 00:03:42 2019 -0500 TH3D EZBoard is LPC1769 (MarlinFirmware#14936) commit 03df3f4 Author: Tanguy Pruvot <[email protected]> Date: Tue Aug 13 02:50:34 2019 +0200 Fix Python scripts unhandled quotes (MarlinFirmware#14926) commit c6be989 Author: Tanguy Pruvot <[email protected]> Date: Tue Aug 13 02:48:46 2019 +0200 Store EEPROM config in flash (MarlinFirmware#14923) Avoid confusion between the 2 possible SDs... commit 13d8dc0 Author: Marcio Teixeira <[email protected]> Date: Sat Aug 10 18:25:30 2019 -0600 Fix incorrect print stat in ExtUI (MarlinFirmware#14881) commit dc21e2e Author: Marcio Teixeira <[email protected]> Date: Sat Aug 10 18:24:41 2019 -0600 Increase XY nozzle offset range (MarlinFirmware#14882) commit fa53384 Author: Marcio Teixeira <[email protected]> Date: Sat Aug 10 18:23:37 2019 -0600 Bury easter egg deeper (MarlinFirmware#14883) commit af4bcb6 Author: Giuliano Zaro <[email protected]> Date: Sun Aug 11 02:22:48 2019 +0200 SAMD51 typo fix (MarlinFirmware#14885) commit d7172a4 Author: Ludy <[email protected]> Date: Sun Aug 11 02:22:18 2019 +0200 Cleanup and conditions (MarlinFirmware#14886) commit 03dbe16 Author: Johnny Eshak <[email protected]> Date: Sun Aug 11 02:20:40 2019 +0200 Compiling M43 on invalid conversion (MarlinFirmware#14897) commit f085199 Author: Giuliano Zaro <[email protected]> Date: Sun Aug 11 02:19:52 2019 +0200 SAMD51: Some LCD pin fixes (MarlinFirmware#14915) commit d78086c Author: Giuliano Zaro <[email protected]> Date: Sun Aug 11 02:18:32 2019 +0200 SAMD51: Neopixel pin mapping (MarlinFirmware#14913) commit 9c5086e Author: Eric Ptak <[email protected]> Date: Sun Aug 11 02:14:31 2019 +0200 [STM32F1] Simpler Flash EEPROM (MarlinFirmware#14829) commit 0745d48 Author: Tanguy Pruvot <[email protected]> Date: Sun Aug 11 01:22:11 2019 +0200 Fix build with and without TOUCH_BUTTONS (MarlinFirmware#14912) commit e7aba49 Author: thisiskeithb <[email protected]> Date: Fri Aug 9 23:53:55 2019 -0700 Update PB5 to correct pin number (MarlinFirmware#14891) commit 5ea5d71 Author: thisiskeithb <[email protected]> Date: Fri Aug 9 23:52:26 2019 -0700 Tevo Michelangelo config updates (MarlinFirmware#14895) commit 5d2519e Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 10 08:45:36 2019 +0200 Allow use of Fysetc SoftwareSerialM (MarlinFirmware#14893) commit d2d71ca Author: Robby Candra <[email protected]> Date: Sat Aug 10 13:42:52 2019 +0700 Clean up Touch pins. Better up/down touch response. (MarlinFirmware#14900) commit 8cc0b4b Author: Tanguy Pruvot <[email protected]> Date: Sat Aug 10 07:58:21 2019 +0200 Revert "Edit STEPS_PER_MM integer only" (MarlinFirmware#14909) This reverts commit 2d98bb3. commit 3129fd0 Author: Giuliano Zaro <[email protected]> Date: Sat Aug 10 07:56:55 2019 +0200 SAMD51: Update LCD pins (MarlinFirmware#14907) commit 9479ec3 Author: Ludy <[email protected]> Date: Sat Aug 10 07:53:26 2019 +0200 Fix Service Menu compile error (MarlinFirmware#14903) commit a7f1021 Author: Giuliano Zaro <[email protected]> Date: Sat Aug 10 00:00:20 2019 +0200 Fix SPI_ENDSTOPS compile error (MarlinFirmware#14906)
commit e83c490 Author: petrzmax <[email protected]> Date: Tue Apr 7 14:45:18 2020 +0200 SD Card volume init fix commit 7f4fd10 Merge: 1538ee9 e1fc6f7 Author: petrzmax <[email protected]> Date: Tue Apr 7 14:36:34 2020 +0200 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro-Stock commit 1538ee9 Author: petrzmax <[email protected]> Date: Mon Mar 30 20:31:31 2020 +0200 Set settings for stock Sapphire Pro commit d36e6c1 Merge: e8b840f 747a4bb Author: petrzmax <[email protected]> Date: Mon Mar 30 20:05:14 2020 +0200 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit e8b840f Author: petrzmax <[email protected]> Date: Sat Mar 28 13:42:32 2020 +0100 SPI EEprom Flash fix & Adv Pause enabled commit f597206 Merge: ffb372e 747b964 Author: petrzmax <[email protected]> Date: Sat Mar 28 13:16:39 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit ffb372e Merge: fc87e19 8752fbd Author: petrzmax <[email protected]> Date: Sat Mar 28 00:55:40 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit fc87e19 Merge: dcddbf1 54a12ee Author: petrzmax <[email protected]> Date: Thu Mar 26 13:29:43 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit dcddbf1 Merge: 2f76ba7 14daf1e Author: petrzmax <[email protected]> Date: Thu Mar 19 15:01:18 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit 2f76ba7 Author: petrzmax <[email protected]> Date: Wed Mar 18 19:29:25 2020 +0100 adjust stepper current commit 66dadce Merge: a3963ed 201c991 Author: petrzmax <[email protected]> Date: Wed Mar 11 15:02:06 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit a3963ed Merge: 90fe4da ab1863a Author: petrzmax <[email protected]> Date: Wed Mar 4 12:24:44 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit 90fe4da Merge: d5f4f6c 42208bc Author: petrzmax <[email protected]> Date: Sun Feb 16 20:50:20 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit d5f4f6c Merge: b226623 63dd0f2 Author: petrzmax <[email protected]> Date: Fri Feb 14 19:29:48 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit b226623 Merge: f7e4299 4a73379 Author: petrzmax <[email protected]> Date: Tue Feb 11 20:22:34 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit f7e4299 Merge: bcf9f7d 0b45493 Author: petrzmax <[email protected]> Date: Mon Feb 10 19:13:14 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit bcf9f7d Author: petrzmax <[email protected]> Date: Mon Feb 10 19:09:23 2020 +0100 Clean Configuration.h commit 6d69f89 Merge: 5732cf6 15b6ad4 Author: petrzmax <[email protected]> Date: Tue Feb 4 13:24:42 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit 5732cf6 Author: petrzmax <[email protected]> Date: Tue Feb 4 13:19:33 2020 +0100 Config updated commit 0440ae2 Merge: e28d928 c4df5cf Author: petrzmax <[email protected]> Date: Fri Jan 31 14:50:24 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit e28d928 Author: petrzmax <[email protected]> Date: Thu Jan 30 21:29:52 2020 +0100 Hemera calibrated & XY steps changed commit 8e64106 Author: petrzmax <[email protected]> Date: Thu Jan 30 18:31:07 2020 +0100 Add PT100 on 32 bit mcu temptable commit ebc6fec Merge: e57f4a9 3c9464e Author: petrzmax <[email protected]> Date: Thu Jan 30 11:48:18 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit e57f4a9 Merge: 06acb0c 131acf3 Author: petrzmax <[email protected]> Date: Mon Jan 27 23:44:19 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit 06acb0c Merge: 1e44132 e2eef12 Author: petrzmax <[email protected]> Date: Mon Jan 27 18:23:14 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit 1e44132 Author: petrzmax <[email protected]> Date: Mon Jan 27 18:18:38 2020 +0100 PT100 - new PID's commit 5f32523 Author: petrzmax <[email protected]> Date: Mon Jan 27 14:46:54 2020 +0100 PT100 & Hemera setup commit aa1179c Author: petrzmax <[email protected]> Date: Wed Jan 22 20:55:07 2020 +0100 Tweaked to allow use of latest TMC lib commit f8f4be8 Author: petrzmax <[email protected]> Date: Tue Jan 21 20:12:41 2020 +0100 TMC2209 SPI connection set commit 38413dc Merge: 7c15cbd b7f86bf Author: petrzmax <[email protected]> Date: Tue Jan 21 11:27:34 2020 +0100 Merge branch 'bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit 7c15cbd Author: petrzmax <[email protected]> Date: Tue Jan 21 11:26:16 2020 +0100 Added SPI pins for TMC's commit 53741b2 Author: petrzmax <[email protected]> Date: Mon Jan 20 22:27:38 2020 +0100 Appropriate upscaler was set commit 644bfb2 Merge: d2aea39 97b5a5f Author: petrzmax <[email protected]> Date: Mon Jan 20 21:31:16 2020 +0100 Merge bugfix-2.0.x changes & revert original TFT upscaler commit d2aea39 Author: petrzmax <[email protected]> Date: Mon Jan 20 21:04:35 2020 +0100 Updated config files commit e35c892 Author: petrzmax <[email protected]> Date: Tue Jan 14 16:39:53 2020 +0100 Junction Deviation adjusted commit 0677dc6 Author: petrzmax <[email protected]> Date: Tue Jan 7 18:04:20 2020 +0100 Some config adjustments commit 7ea52fb Author: petrzmax <[email protected]> Date: Mon Jan 6 18:11:35 2020 +0100 Updated Configuration_adv.h commit 8c5b4ef Author: petrzmax <[email protected]> Date: Mon Dec 30 17:34:15 2019 +0100 Tweaked encoder settings commit 8852892 Merge: 1387145 16787c9 Author: petrzmax <[email protected]> Date: Mon Dec 30 17:14:56 2019 +0100 Merge remote-tracking branch 'origin/bugfix-2.0.x' into 2.0.x-Sapphire-Pro commit 1387145 Author: petrzmax <[email protected]> Date: Mon Dec 30 17:03:35 2019 +0100 Restore original M250.cpp commit dc64a33 Author: petrzmax <[email protected]> Date: Mon Dec 30 15:32:28 2019 +0100 Add my config files commit d707766 Author: sobieh <[email protected]> Date: Mon Nov 18 16:58:49 2019 +0100 Eeprom in external SPI flash (MarlinFirmware#7) tested over the weekend - works great * Enable EEPROM auto init as we will probably start with invalid data in flash. * Fix XPT2046 to begin/end with it's soft spi pins when needed and to not block SPI2 and vice versa. * Added SPIFlash class to STM32F1 hal. * Added persistent_store_spi_flash and updated persistent_store_sdcard to still be default. * Added required config to pins_MKS_ROBIN_NANO.h. commit 0672e7e Author: inib <[email protected]> Date: Sun Nov 10 02:27:44 2019 +0100 fix for pio core 4.1 commit 076ab60 Author: inib <[email protected]> Date: Fri Nov 1 19:46:07 2019 +0100 config for "vanilla" Sapphire Pro commit 909e84e Author: inib <[email protected]> Date: Fri Nov 1 19:26:51 2019 +0100 fixing octoprint connection issues commit c1fd548 Merge: 08a76af 2b31684 Author: inib <[email protected]> Date: Fri Nov 1 19:24:07 2019 +0100 update to current marlin/bugfix 2.0.x commit 2b31684 Merge: c07def2 e7d9db2 Author: inib <[email protected]> Date: Fri Nov 1 19:20:30 2019 +0100 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into MarlinFirmware-bugfix-2.0.x commit c07def2 Merge: 17b02a2 35b1149 Author: inib <[email protected]> Date: Wed Oct 30 23:27:10 2019 +0100 update to current 2.0.x commit 17b02a2 Author: inib <[email protected]> Date: Wed Oct 30 23:19:03 2019 +0100 current config commit cf4631c Author: inib <[email protected]> Date: Fri Oct 25 22:28:58 2019 +0200 temp window histerysis commit 506dfa9 Author: inib <[email protected]> Date: Sun Oct 20 17:53:05 2019 +0200 new driver on extruder commit f41e7c5 Author: inib <[email protected]> Date: Sat Oct 19 23:51:48 2019 +0200 hotend fan on heater2 commit 08a76af Merge: ffab812 94b9866 Author: inib <[email protected]> Date: Wed Oct 16 23:10:18 2019 +0200 Merge branch 'MarlinFirmware-bugfix-2.0.x' into 2.0.X-SapphirePro-3.5TFT commit 94b9866 Merge: ffab812 0652f19 Author: inib <[email protected]> Date: Wed Oct 16 23:05:58 2019 +0200 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into MarlinFirmware-bugfix-2.0.x commit 3b2ece9 Author: inib <[email protected]> Date: Wed Oct 16 22:40:37 2019 +0200 fixing chamber temperature commit 44cee4f Author: inib <[email protected]> Date: Thu Oct 10 10:10:38 2019 +0200 Color presets added - new gcode in M250 commit 7a1a38f Author: inib <[email protected]> Date: Mon Oct 7 01:14:42 2019 +0200 new class commit 3b6ac0d Author: inib <[email protected]> Date: Sat Oct 5 15:56:45 2019 +0200 ABL Bilinear and activated Z-probing commit ffab812 Author: inib <[email protected]> Date: Sat Oct 5 13:55:45 2019 +0200 small fix may_extrude_length commit 3590e81 Author: inib <[email protected]> Date: Thu Oct 3 22:18:51 2019 +0200 homing backoff to clear switches commit b58dc53 Author: inib <[email protected]> Date: Thu Oct 3 22:18:12 2019 +0200 config tweaks: lin advance, adv. pause, etc commit 00cfed4 Author: inib <[email protected]> Date: Wed Oct 2 21:56:50 2019 +0200 upscale, enable calibrate touchUI commit 053fa69 Author: inib <[email protected]> Date: Tue Oct 1 21:42:27 2019 +0200 3x upscaler hack / my Sapphire Pro config
Possible fix for MarlinFirmware#7 and MarlinFirmware#8
As a possible fix for the bug with Cura's end Gcode as described in issue MarlinFirmware#7, I changed the leveling state to be disabled after homing since Cura uses X homing in their end Gcode.
Temporary stopgap until we get this spaghetti cleaned up.
pins_MKS_ROBIN_NANO_V2.h после установки в принтер
Support spaces in paths
Possible fix for MarlinFirmware#7 and MarlinFirmware#8
As a possible fix for the bug with Cura's end Gcode as described in issue MarlinFirmware#7, I changed the leveling state to be disabled after homing since Cura uses X homing in their end Gcode.
* add flag for home sanity check * calculate sanity check on homing routines * simplify time keeping, move const variables to function scope * even more correct types * use more user defined constants in calculation
Revert "Limit the negative motion to -5.0mm"
This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs. |
Many people using marlin for ultimaker experienced skewed builds or missed steps. Some might be hardware related, but often the missed steps occur at odd places.
I made a branch that counts the steps right at the place where the output pins are activated.
https://github.com/lampmaker/Marlin/tree/skewtest
Using M114 (and after waiting for the last movement to stop), you can query the current_position[] values and the calculated position values, based on the steps forward and backward.
As it seems, there is sometimes a difference between the two position values. I've seen differences of 1mm and larger.
The text was updated successfully, but these errors were encountered: