💡 Adjust headers, formatting

MarlinFirmware · Oct 3, 2021 · ab96091 · ab96091
1 parent e7a25a4
commit ab96091
Show file tree

Hide file tree

Showing 145 changed files with 269 additions and 36 deletions.
diff --git a/Marlin/src/HAL/AVR/pinsDebug.h b/Marlin/src/HAL/AVR/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h b/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/AVR/pinsDebug_plus_70.h b/Marlin/src/HAL/AVR/pinsDebug_plus_70.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
@@ -20,7 +20,6 @@
  *
  */
 
-
 /**
  * Based on u8g_com_msp430_hw_spi.c
  *

diff --git a/Marlin/src/HAL/DUE/pinsDebug.h b/Marlin/src/HAL/DUE/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/ESP32/spi_pins.h b/Marlin/src/HAL/ESP32/spi_pins.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/LINUX/main.cpp b/Marlin/src/HAL/LINUX/main.cpp
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 //#define GPIO_LOGGING // Full GPIO and Positional Logging

diff --git a/Marlin/src/HAL/LINUX/pinsDebug.h b/Marlin/src/HAL/LINUX/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/LPC1768/pinsDebug.h b/Marlin/src/HAL/LPC1768/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h b/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h
@@ -20,7 +20,6 @@
 /**
  * Support routines for X86_64
  */
-
 #pragma once
 
 /**

diff --git a/Marlin/src/HAL/SAMD51/QSPIFlash.h b/Marlin/src/HAL/SAMD51/QSPIFlash.h
@@ -25,7 +25,6 @@
  *
  * Derived from Adafruit_SPIFlash class with no SdFat references
  */
-
 #pragma once
 
 #include <Adafruit_SPIFlashBase.h>

diff --git a/Marlin/src/HAL/STM32/MarlinSPI.cpp b/Marlin/src/HAL/STM32/MarlinSPI.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #if defined(HAL_STM32) && !defined(STM32H7xx)

diff --git a/Marlin/src/HAL/STM32/MarlinSerial.cpp b/Marlin/src/HAL/STM32/MarlinSerial.cpp
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/MarlinSerial.h b/Marlin/src/HAL/STM32/MarlinSerial.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp b/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp b/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/eeprom_if_iic.cpp b/Marlin/src/HAL/STM32/eeprom_if_iic.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/eeprom_sdcard.cpp b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/fast_pwm.cpp b/Marlin/src/HAL/STM32/fast_pwm.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/pinsDebug.h b/Marlin/src/HAL/STM32/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/STM32/spi_pins.h b/Marlin/src/HAL/STM32/spi_pins.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp b/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/tft/tft_spi.cpp b/Marlin/src/HAL/STM32/tft/tft_spi.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/tft/xpt2046.cpp b/Marlin/src/HAL/STM32/tft/xpt2046.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/usb_host.cpp b/Marlin/src/HAL/STM32/usb_host.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/usb_serial.cpp b/Marlin/src/HAL/STM32/usb_serial.cpp
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32/usb_serial.h b/Marlin/src/HAL/STM32/usb_serial.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/STM32/watchdog.cpp b/Marlin/src/HAL/STM32/watchdog.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../platforms.h"
 
 #ifdef HAL_STM32

diff --git a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __STM32F1__
 
 #include "../../../inc/MarlinConfig.h"

diff --git a/Marlin/src/HAL/STM32F1/eeprom_wired.cpp b/Marlin/src/HAL/STM32F1/eeprom_wired.cpp
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/STM32F1/pinsDebug.h b/Marlin/src/HAL/STM32F1/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/STM32F1/spi_pins.h b/Marlin/src/HAL/STM32F1/spi_pins.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/TEENSY31_32/eeprom.cpp b/Marlin/src/HAL/TEENSY31_32/eeprom.cpp
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __MK20DX256__
 
 /**

diff --git a/Marlin/src/HAL/TEENSY35_36/pinsDebug.h b/Marlin/src/HAL/TEENSY35_36/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/TEENSY40_41/pinsDebug.h b/Marlin/src/HAL/TEENSY40_41/pinsDebug.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

diff --git a/Marlin/src/HAL/shared/Delay.cpp b/Marlin/src/HAL/shared/Delay.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "Delay.h"
 
 #include "../../inc/MarlinConfig.h"

diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../../../inc/MarlinConfig.h"
 
 #if ENABLED(AUTO_BED_LEVELING_UBL)

diff --git a/Marlin/src/feature/cancel_object.cpp b/Marlin/src/feature/cancel_object.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../inc/MarlinConfig.h"
 
 #if ENABLED(CANCEL_OBJECTS)

diff --git a/Marlin/src/feature/closedloop.cpp b/Marlin/src/feature/closedloop.cpp
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+
 #include "../inc/MarlinConfig.h"
 
 #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
-Original file line number
+Diff line change
@@ Expand Up / @@ -20,7 +20,6 @@ @@
      *
      */
     /**
      * Based on u8g_com_msp430_hw_spi.c
      *
@@ Expand Down @@