change option name

MarlinFirmware · Sep 14, 2021 · 7c56bbd · 7c56bbd
1 parent 0e117e5
commit 7c56bbd
Show file tree

Hide file tree

Showing 6 changed files with 8 additions and 8 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -2948,4 +2948,4 @@
 //#define EDITABLE_SERVO_ANGLES
 
 // Disable servo with M282 to reduce power consumption, noise, and heat when not in use
-//#define SERVOS_CAN_BE_DISABLED
+//#define SERVO_DISABLE_COMMAND
diff --git a/Marlin/src/gcode/control/M282.cpp b/Marlin/src/gcode/control/M282.cpp
@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(SERVOS_CAN_BE_DISABLED)
+#if ENABLED(SERVO_DISABLE_COMMAND)
 
 #include "../gcode.h"
 #include "../../module/servo.h"
@@ -42,4 +42,4 @@ void GcodeSuite::M282() {
 
 }
 
-#endif // SERVOS_CAN_BE_DISABLED
+#endif // SERVO_DISABLE_COMMAND
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
@@ -717,7 +717,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         #if ENABLED(EDITABLE_SERVO_ANGLES)
           case 281: M281(); break;                                // M281: Set servo angles
         #endif
-        #if ENABLED(SERVOS_CAN_BE_DISABLED)
+        #if ENABLED(SERVO_DISABLE_COMMAND)
           case 282: M282(); break;                                // M282: Detach servo
         #endif
       #endif

diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
@@ -192,7 +192,7 @@
  * M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS)
  * M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
  * M281 - Set servo min|max position: "M281 P<index> L<min> U<max>". (Requires EDITABLE_SERVO_ANGLES)
- * M282 - Detach servo: "M282 P<index>". (Requires SERVOS_CAN_BE_DISABLED)
+ * M282 - Detach servo: "M282 P<index>". (Requires SERVO_DISABLE_COMMAND)
  * M290 - Babystepping (Requires BABYSTEPPING)
  * M300 - Play beep sound S<frequency Hz> P<duration ms>
  * M301 - Set PID parameters P I and D. (Requires PIDTEMP)
@@ -863,7 +863,7 @@ class GcodeSuite {
       static void M281();
       static void M281_report(const bool forReplay=true);
     #endif
-    #if ENABLED(SERVOS_CAN_BE_DISABLED)
+    #if ENABLED(SERVO_DISABLE_COMMAND)
       static void M282();
     #endif
   #endif

diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
@@ -2600,7 +2600,7 @@
   #undef SERVO_DELAY
   #undef DEACTIVATE_SERVOS_AFTER_MOVE
   #undef EDITABLE_SERVO_ANGLES
-  #undef SERVOS_CAN_BE_DISABLED
+  #undef SERVO_DISABLE_COMMAND
 #endif
 
 // Sensors

diff --git a/ini/features.ini b/ini/features.ini
@@ -173,7 +173,7 @@ HAS_SMART_EFF_MOD                      = src_filter=+<src/gcode/config/M672.cpp>
 COOLANT_CONTROL|AIR_ASSIST             = src_filter=+<src/gcode/control/M7-M9.cpp>
 AIR_EVACUATION                         = src_filter=+<src/gcode/control/M10-M11.cpp>
 HAS_SOFTWARE_ENDSTOPS                  = src_filter=+<src/gcode/control/M211.cpp>
-SERVOS_CAN_BE_DISABLED                 = src_filter=+<src/gcode/control/M282.cpp>
+SERVO_DISABLE_COMMAND                  = src_filter=+<src/gcode/control/M282.cpp>
 HAS_DUPLICATION_MODE                   = src_filter=+<src/gcode/control/M605.cpp>
 LIN_ADVANCE                            = src_filter=+<src/gcode/feature/advance>
 PHOTO_GCODE                            = src_filter=+<src/gcode/feature/camera>