Skip to content

Commit

Permalink
Set redundant src/dst with a named ID
Browse files Browse the repository at this point in the history
  • Loading branch information
thinkyhead committed Jul 10, 2021
1 parent b743454 commit 727d5d0
Show file tree
Hide file tree
Showing 8 changed files with 126 additions and 109 deletions.
12 changes: 3 additions & 9 deletions Marlin/Configuration.h
Original file line number Diff line number Diff line change
Expand Up @@ -529,17 +529,11 @@
* the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting
* the Bed sensor (-1) will disable bed heating/monitoring.
*
* Use the following to select temp sensors:
* -5 : Cooler
* -4 : Probe
* -3 : Motherboard
* -2 : Chamber
* -1 : Bed
* 0-7 : E0 through E7
* For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7
*/
#if TEMP_SENSOR_REDUNDANT
#define TEMP_SENSOR_REDUNDANT_SOURCE 1 // The sensor that will provide the redundant reading.
#define TEMP_SENSOR_REDUNDANT_TARGET 0 // The sensor that we are providing a redundant reading for.
#define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading.
#define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for.
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
#endif

Expand Down
4 changes: 2 additions & 2 deletions Marlin/src/MarlinCore.cpp
Original file line number Diff line number Diff line change
Expand Up @@ -1168,10 +1168,10 @@ void setup() {
SETUP_RUN(HAL_init());

// Init and disable SPI thermocouples; this is still needed
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0)
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0))
OUT_WRITE(TEMP_0_CS_PIN, HIGH); // Disable
#endif
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))
OUT_WRITE(TEMP_1_CS_PIN, HIGH);
#endif

Expand Down
23 changes: 23 additions & 0 deletions Marlin/src/inc/Conditionals_adv.h
Original file line number Diff line number Diff line change
Expand Up @@ -125,6 +125,29 @@
#undef THERMAL_PROTECTION_COOLER
#endif

// Usurp a sensor to do redundant readings
#if TEMP_SENSOR_REDUNDANT
#define REDUNDANT_TEMP_MATCH(M,N) (TEMP_SENSOR_REDUNDANT_##M == HID_##N)
#else
#define REDUNDANT_TEMP_MATCH(...) 0
#endif

// Temperature sensor IDs
#define HID_REDUNDANT -6
#define HID_COOLER -5
#define HID_PROBE -4
#define HID_BOARD -3
#define HID_CHAMBER -2
#define HID_BED -1
#define HID_E0 0
#define HID_E1 1
#define HID_E2 2
#define HID_E3 3
#define HID_E4 4
#define HID_E5 5
#define HID_E6 6
#define HID_E7 7

#if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS))
#define HAS_MIXER_SYNC_CHANNEL 1
#endif
Expand Down
58 changes: 29 additions & 29 deletions Marlin/src/inc/Conditionals_post.h
Original file line number Diff line number Diff line change
Expand Up @@ -528,84 +528,84 @@
// Usurp a sensor to do redundant readings
#if TEMP_SENSOR_REDUNDANT
#ifndef TEMP_SENSOR_REDUNDANT_SOURCE
#define TEMP_SENSOR_REDUNDANT_SOURCE 1
#define TEMP_SENSOR_REDUNDANT_SOURCE E1
#endif
#ifndef TEMP_SENSOR_REDUNDANT_TARGET
#define TEMP_SENSOR_REDUNDANT_TARGET 0
#define TEMP_SENSOR_REDUNDANT_TARGET E0
#endif
#if !PIN_EXISTS(TEMP_REDUNDANT)
#ifndef TEMP_SENSOR_REDUNDANT_MAX_DIFF
#define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10
#endif
#if TEMP_SENSOR_REDUNDANT_SOURCE == -5
#if REDUNDANT_TEMP_MATCH(SOURCE, COOLER)
#if !PIN_EXISTS(TEMP_COOLER)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to COOLER requires TEMP_COOLER_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_COOLER_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -4
#elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE)
#if !PIN_EXISTS(TEMP_PROBE)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to PROBE requires TEMP_PROBE_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_PROBE_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -2
#elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER)
#if !PIN_EXISTS(TEMP_CHAMBER)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to CHAMBER requires TEMP_CHAMBER_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_CHAMBER_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -1
#elif REDUNDANT_TEMP_MATCH(SOURCE, BED)
#if !PIN_EXISTS(TEMP_BED)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to BED requires TEMP_BED_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_BED_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 0
#elif REDUNDANT_TEMP_MATCH(SOURCE, E0)
#if !PIN_EXISTS(TEMP_0)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 0 requires TEMP_0_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E0 requires TEMP_0_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_0_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 1
#elif REDUNDANT_TEMP_MATCH(SOURCE, E1)
#if !PIN_EXISTS(TEMP_1)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 1 requires TEMP_1_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E1 requires TEMP_1_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_1_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 2
#elif REDUNDANT_TEMP_MATCH(SOURCE, E2)
#if !PIN_EXISTS(TEMP_2)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 2 requires TEMP_2_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E2 requires TEMP_2_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_2_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 3
#elif REDUNDANT_TEMP_MATCH(SOURCE, E3)
#if !PIN_EXISTS(TEMP_3)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 3 requires TEMP_3_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E3 requires TEMP_3_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_3_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 4
#elif REDUNDANT_TEMP_MATCH(SOURCE, E4)
#if !PIN_EXISTS(TEMP_4)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 4 requires TEMP_4_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E4 requires TEMP_4_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_4_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 5
#elif REDUNDANT_TEMP_MATCH(SOURCE, E5)
#if !PIN_EXISTS(TEMP_5)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 5 requires TEMP_5_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E5 requires TEMP_5_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_5_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 6
#elif REDUNDANT_TEMP_MATCH(SOURCE, E6)
#if !PIN_EXISTS(TEMP_6)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 6 requires TEMP_6_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E6 requires TEMP_6_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_6_PIN
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 7
#elif REDUNDANT_TEMP_MATCH(SOURCE, E7)
#if !PIN_EXISTS(TEMP_7)
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to 7 requires TEMP_7_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE set to E7 requires TEMP_7_PIN."
#else
#define TEMP_REDUNDANT_PIN TEMP_7_PIN
#endif
Expand Down Expand Up @@ -695,23 +695,23 @@
#define TEMP_SENSOR_REDUNDANT_IS_MAX_TC 1

#if TEMP_SENSOR_REDUNDANT == -5
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
#error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
#endif

#define TEMP_SENSOR_REDUNDANT_IS_MAX31865 1
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024
#elif TEMP_SENSOR_REDUNDANT == -3
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
#endif

#define TEMP_SENSOR_REDUNDANT_IS_MAX31855 1
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270
#define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800
#elif TEMP_SENSOR_REDUNDANT == -2
#if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1
#if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1)
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)."
#endif

Expand All @@ -721,13 +721,13 @@
#endif

// mimic setting up the source TEMP_SENSOR
#if TEMP_SENSOR_REDUNDANT_SOURCE == 0
#if REDUNDANT_TEMP_MATCH(SOURCE, E0)
#define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
#define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
#ifndef MAX31865_SENSOR_WIRES_0
#define MAX31865_SENSOR_WIRES_0 2
#endif
#elif TEMP_SENSOR_REDUNDANT_SOURCE == 1
#elif REDUNDANT_TEMP_MATCH(SOURCE, E1)
#define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN
#define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX
#ifndef MAX31865_SENSOR_WIRES_1
Expand Down Expand Up @@ -776,7 +776,7 @@
#if HAS_MAX_TC

// Translate old _SS, _CS, _SCK, _DO, _DI, _MISO, and _MOSI PIN defines.
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
#if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))

#if !PIN_EXISTS(TEMP_0_CS) // SS, CS
#if PIN_EXISTS(MAX6675_SS)
Expand Down Expand Up @@ -845,7 +845,7 @@

#endif // TEMP_SENSOR_0_IS_MAX_TC

#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
#if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1))

#if !PIN_EXISTS(TEMP_1_CS) // SS2, CS2
#if PIN_EXISTS(MAX6675_SS2)
Expand Down
108 changes: 52 additions & 56 deletions Marlin/src/inc/SanityCheck.h
Original file line number Diff line number Diff line change
Expand Up @@ -1972,14 +1972,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* Required MAX31865 settings
*/
#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 0)
#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E0))
#if !defined(MAX31865_SENSOR_WIRES_0) || !WITHIN(MAX31865_SENSOR_WIRES_0, 2, 4)
#error "MAX31865_SENSOR_WIRES_0 must be defined as an integer between 2 and 4."
#elif !defined(MAX31865_SENSOR_OHMS_0) || !defined(MAX31865_CALIBRATION_OHMS_0)
#error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set if TEMP_SENSOR_0/TEMP_SENSOR_REDUNDANT is MAX31865."
#endif
#endif
#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 1)
#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E1))
#if !defined(MAX31865_SENSOR_WIRES_1) || !WITHIN(MAX31865_SENSOR_WIRES_1, 2, 4)
#error "MAX31865_SENSOR_WIRES_1 must be defined as an integer between 2 and 4."
#elif !defined(MAX31865_SENSOR_OHMS_1) || !defined(MAX31865_CALIBRATION_OHMS_1)
Expand All @@ -1995,62 +1995,58 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_SOURCE."
#elif !defined(TEMP_SENSOR_REDUNDANT_TARGET)
#error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_TARGET."
#elif TEMP_SENSOR_REDUNDANT_SOURCE == TEMP_SENSOR_REDUNDANT_TARGET
#elif REDUNDANT_TEMP_MATCH(SOURCE, TEMP_SENSOR_REDUNDANT_TARGET)
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be the same as TEMP_SENSOR_REDUNDANT_TARGET."
#elif TEMP_SENSOR_REDUNDANT_SOURCE < -5 || TEMP_SENSOR_REDUNDANT_SOURCE > 7
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be between -5 and 7."
#elif TEMP_SENSOR_REDUNDANT_TARGET < -5 || TEMP_SENSOR_REDUNDANT_TARGET > 7
#error "TEMP_SENSOR_REDUNDANT_TARGET must be between -5 and 7."
#elif HAS_MULTI_HOTEND && TEMP_SENSOR_REDUNDANT_SOURCE < HOTENDS
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last TEMP_SENSOR used with a hotend; you can't use a sensor in the middle of two hotends."
#endif

#if TEMP_SENSOR_REDUNDANT_SOURCE == 0 && HAS_HOTEND
#error "TEMP_SENSOR_REDUNDANT_SOURCE can not be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0."
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -5 && HAS_TEMP_COOLER
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Cooler (-5): TEMP_SENSOR_COOLER has already defined the sensor."
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -4 && HAS_TEMP_PROBE
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Probe (-4): TEMP_SENSOR_PROBE has already defined the sensor."
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -3 && HAS_TEMP_BOARD
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Board (-3): TEMP_SENSOR_BOARD has already defined the sensor."
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -2 && HAS_TEMP_CHAMBER
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Chamber (-2): TEMP_SENSOR_CHAMBER has already defined the sensor."
#elif TEMP_SENSOR_REDUNDANT_SOURCE == -1 && HAS_TEMP_BED
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Bed (-1): TEMP_SENSOR_BED has already defined the sensor."
#endif

#if TEMP_SENSOR_REDUNDANT_TARGET == 0 && !PIN_EXISTS(TEMP_0)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 (0): requires TEMP_0_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == 1 && !PIN_EXISTS(TEMP_1)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 (1): requires TEMP_1_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == 2 && !PIN_EXISTS(TEMP_2)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 (2): requires TEMP_2_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == 3 && !PIN_EXISTS(TEMP_3)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 (3): requires TEMP_3_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == 4 && !PIN_EXISTS(TEMP_4)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 (4): requires TEMP_4_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == 5 && !PIN_EXISTS(TEMP_5)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 (5): requires TEMP_5_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == 6 && !PIN_EXISTS(TEMP_6)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 (6): requires TEMP_6_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == 7 && !PIN_EXISTS(TEMP_7)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 (7): requires TEMP_7_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && !PIN_EXISTS(TEMP_BED)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Bed (-1): requires TEMP_BED_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && !PIN_EXISTS(TEMP_CHAMBER)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Chamber (-2): requires TEMP_CHAMBER_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == -3 && !PIN_EXISTS(TEMP_BOARD)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Board (-3): requires TEMP_BOARD_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && !PIN_EXISTS(TEMP_PROBE)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Probe (-4): requires TEMP_PROBE_PIN"
#elif TEMP_SENSOR_REDUNDANT_TARGET == -5 && !PIN_EXISTS(TEMP_COOLER)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be Cooler (-5): requires TEMP_COOLER_PIN"
#endif

#if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0 && !PIN_EXISTS(TEMP_0_CS)
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 0 requires TEMP_0_CS_PIN."
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1 && !PIN_EXISTS(TEMP_1_CS)
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 1 requires TEMP_1_CS_PIN."
#error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last used hotend TEMP_SENSOR."
#endif

#if REDUNDANT_TEMP_MATCH(SOURCE, E0) && HAS_HOTEND
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0."
#elif REDUNDANT_TEMP_MATCH(SOURCE, COOLER) && HAS_TEMP_COOLER
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be COOLER. TEMP_SENSOR_COOLER is in use."
#elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE) && HAS_TEMP_PROBE
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be PROBE. TEMP_SENSOR_PROBE is in use."
#elif REDUNDANT_TEMP_MATCH(SOURCE, BOARD) && HAS_TEMP_BOARD
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BOARD. TEMP_SENSOR_BOARD is in use."
#elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER) && HAS_TEMP_CHAMBER
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be CHAMBER. TEMP_SENSOR_CHAMBER is in use."
#elif REDUNDANT_TEMP_MATCH(SOURCE, BED) && HAS_TEMP_BED
#error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BED. TEMP_SENSOR_BED is in use."
#endif

#if REDUNDANT_TEMP_MATCH(TARGET, E0) && !PIN_EXISTS(TEMP_0)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 without TEMP_0_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, E1) && !PIN_EXISTS(TEMP_1)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 without TEMP_1_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, E2) && !PIN_EXISTS(TEMP_2)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 without TEMP_2_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, E3) && !PIN_EXISTS(TEMP_3)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 without TEMP_3_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, E4) && !PIN_EXISTS(TEMP_4)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 without TEMP_4_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, E5) && !PIN_EXISTS(TEMP_5)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 without TEMP_5_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, E6) && !PIN_EXISTS(TEMP_6)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 without TEMP_6_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, E7) && !PIN_EXISTS(TEMP_7)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 without TEMP_7_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, BED) && !PIN_EXISTS(TEMP_BED)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be BED without TEMP_BED_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && !PIN_EXISTS(TEMP_CHAMBER)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be CHAMBER without TEMP_CHAMBER_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && !PIN_EXISTS(TEMP_BOARD)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be BOARD without TEMP_BOARD_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && !PIN_EXISTS(TEMP_PROBE)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be PROBE without TEMP_PROBE_PIN defined."
#elif REDUNDANT_TEMP_MATCH(TARGET, COOLER) && !PIN_EXISTS(TEMP_COOLER)
#error "TEMP_SENSOR_REDUNDANT_TARGET can't be COOLER without TEMP_COOLER_PIN defined."
#endif

#if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0) && !PIN_EXISTS(TEMP_0_CS)
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E0 requires TEMP_0_CS_PIN."
#elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1) && !PIN_EXISTS(TEMP_1_CS)
#error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E1 requires TEMP_1_CS_PIN."
#endif
#endif

Expand Down
Loading

0 comments on commit 727d5d0

Please sign in to comment.