Kernel v3.18.3+ spins 2nd cpu #25
Comments
|
I can also put load onto the second CPU and it seems to work - so my guess is it's just the statistics in |
|
When I check on my otherwise idle system I seem to have pretty high numbers and still top seems to be saying that I am using a lot of user and high I should also note that the CPU is not hot and that this is on the Debian image on a SD card with a kernel compiled under the Debian on the SD card, and the two files renamed as per the now closed issue #24 and the u-boot: mkimage.c patched for 64 integers per issue #22 |
|
what is your cmdline. I noticed this rpcbind cpu usage would go away with devtmpfs.mount=1 in the cmdline. I thought I had enabled it in the defconfig.. |
|
Please note. Due to the way interrupts are wired inside the jz4780. One cpu will always have to handle the interrupts. That might mess up stats.. |
|
Should be solved by 58aab73 as it enables CONFIG_DEVTMPFS_MOUNT=y in defconfig |
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
May 16, 2018
syzbot caught an infinite recursion in nsh_gso_segment().
Problem here is that we need to make sure the NSH header is of
reasonable length.
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by syz-executor0/10189:
#0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
#1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
MIPS#32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ MIPS#26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
__lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
rcu_read_lock include/linux/rcupdate.h:632 [inline]
skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
__skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
skb_gso_segment include/linux/netdevice.h:4025 [inline]
validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
qdisc_restart net/sched/sch_generic.c:399 [inline]
__qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
__dev_xmit_skb net/core/dev.c:3243 [inline]
__dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
packet_snd net/packet/af_packet.c:2951 [inline]
packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:639
__sys_sendto+0x3d7/0x670 net/socket.c:1789
__do_sys_sendto net/socket.c:1801 [inline]
__se_sys_sendto net/socket.c:1797 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: c411ed8 ("nsh: add GSO support")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Jiri Benc <[email protected]>
Reported-by: syzbot <[email protected]>
Acked-by: Jiri Benc <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
nemunaire
pushed a commit
to nemunaire/CI20_linux
that referenced
this issue
Jun 6, 2018
commit af3ff80 upstream. Because the HMAC template didn't check that its underlying hash algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))" through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC being used without having been keyed, resulting in sha3_update() being called without sha3_init(), causing a stack buffer overflow. This is a very old bug, but it seems to have only started causing real problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3) because the innermost hash's state is ->import()ed from a zeroed buffer, and it just so happens that other hash algorithms are fine with that, but SHA-3 is not. However, there could be arch or hardware-dependent hash algorithms also affected; I couldn't test everything. Fix the bug by introducing a function crypto_shash_alg_has_setkey() which tests whether a shash algorithm is keyed. Then update the HMAC template to require that its underlying hash algorithm is unkeyed. Here is a reproducer: #include <linux/if_alg.h> #include <sys/socket.h> int main() { int algfd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "hmac(hmac(sha3-512-generic))", }; char key[4096] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (const struct sockaddr *)&addr, sizeof(addr)); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); } Here was the KASAN report from syzbot: BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline] BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044 CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ MIPS#25 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 memcpy include/linux/string.h:341 [inline] sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 crypto_shash_update+0xcb/0x220 crypto/shash.c:109 shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 hmac_finup+0x182/0x330 crypto/hmac.c:152 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172 crypto_shash_digest+0xc4/0x120 crypto/shash.c:186 hmac_setkey+0x36a/0x690 crypto/hmac.c:66 crypto_shash_setkey+0xad/0x190 crypto/shash.c:64 shash_async_setkey+0x47/0x60 crypto/shash.c:207 crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200 hash_setkey+0x40/0x90 crypto/algif_hash.c:446 alg_setkey crypto/af_alg.c:221 [inline] alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Reported-by: syzbot <[email protected]> Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Jul 3, 2018
In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (commit 21bb132: "dm bufio: remove code that merges slab caches") - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggered: Buffer I/O error on dev dm-0, logical block 1572848, async page read device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 device-mapper: thin: 253:1: aborting current metadata transaction sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ MIPS#25 Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_create_dir_ns+0x77/0x80 kobject_add_internal+0xba/0x2e0 kobject_init_and_add+0x70/0xb0 sysfs_slab_add+0xb1/0x250 __kmem_cache_create+0x116/0x150 create_cache+0xd9/0x1f0 kmem_cache_create_usercopy+0x1c1/0x250 kmem_cache_create+0x18/0x20 dm_bufio_client_create+0x1ae/0x410 [dm_bufio] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] metadata_operation_failed+0x59/0x100 [dm_thin_pool] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] process_cell+0x2a3/0x550 [dm_thin_pool] do_worker+0x28d/0x8f0 [dm_thin_pool] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Mikulas Patocka <[email protected]> Reported-by: Mike Snitzer <[email protected]> Tested-by: Mike Snitzer <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: David Rientjes <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Jul 24, 2018
Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 MIPS#16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 MIPS#17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 MIPS#18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 MIPS#19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- MIPS#20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame MIPS#21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd MIPS#22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 MIPS#23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 MIPS#24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 MIPS#25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 MIPS#26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa MIPS#27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca MIPS#28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 MIPS#29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb MIPS#30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <[email protected]> # v4.17+ Signed-off-by: Chuck Anderson <[email protected]> Signed-off-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Feb 3, 2019
…s while handle_mm_fault do_page_fault() forgot to relinquish mmap_sem if a signal came while handling handle_mm_fault() - due to say a ctl+c or oom etc. This would later cause a deadlock by acquiring it twice. This came to light when running libc testsuite tst-tls3-malloc test but is likely also the cause for prior seen LTP failures. Using lockdep clearly showed what the issue was. | # while true; do ./tst-tls3-malloc ; done | Didn't expect signal from child: got `Segmentation fault' | ^C | ============================================ | WARNING: possible recursive locking detected | 4.17.0+ MIPS#25 Not tainted | -------------------------------------------- | tst-tls3-malloc/510 is trying to acquire lock: | 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c | |but task is already holding lock: |606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0 | | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(&mm->mmap_sem); | lock(&mm->mmap_sem); | | *** DEADLOCK *** | ------------------------------------------------------------ What the change does is not obvious (note to myself) prior code was | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_ERROR | up_read | if user_mode | return <-- lock still held, this was the BUG New code | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_RETRY | return <-- not same case as above, but still OK since | core mm already relinq lock for FAULT_RETRY | ... | | < Now falls through for bug case above > | | up_read() <-- lock relinquished Cc: [email protected] Signed-off-by: Vineet Gupta <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Feb 22, 2019
Eric Biggers reported: > The following commit, which went into v4.20, introduced undefined behavior when > sys_rt_sigqueueinfo() is called with sig=0: > > commit 4ce5f9c > Author: Eric W. Biederman <[email protected]> > Date: Tue Sep 25 12:59:31 2018 +0200 > > signal: Use a smaller struct siginfo in the kernel > > In sig_specific_sicodes(), used from known_siginfo_layout(), the expression > '1ULL << ((sig)-1)' is undefined as it evaluates to 1ULL << 4294967295. > > Reproducer: > > #include <signal.h> > #include <sys/syscall.h> > #include <unistd.h> > > int main(void) > { > siginfo_t si = { .si_code = 1 }; > syscall(__NR_rt_sigqueueinfo, 0, 0, &si); > } > > UBSAN report for v5.0-rc1: > > UBSAN: Undefined behaviour in kernel/signal.c:2946:7 > shift exponent 4294967295 is too large for 64-bit type 'long unsigned int' > CPU: 2 PID: 346 Comm: syz_signal Not tainted 5.0.0-rc1 MIPS#25 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 > Call Trace: > __dump_stack lib/dump_stack.c:77 [inline] > dump_stack+0x70/0xa5 lib/dump_stack.c:113 > ubsan_epilogue+0xd/0x40 lib/ubsan.c:159 > __ubsan_handle_shift_out_of_bounds+0x12c/0x170 lib/ubsan.c:425 > known_siginfo_layout+0xae/0xe0 kernel/signal.c:2946 > post_copy_siginfo_from_user kernel/signal.c:3009 [inline] > __copy_siginfo_from_user+0x35/0x60 kernel/signal.c:3035 > __do_sys_rt_sigqueueinfo kernel/signal.c:3553 [inline] > __se_sys_rt_sigqueueinfo kernel/signal.c:3549 [inline] > __x64_sys_rt_sigqueueinfo+0x31/0x70 kernel/signal.c:3549 > do_syscall_64+0x4c/0x1b0 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > RIP: 0033:0x433639 > Code: c4 18 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b 27 00 00 c3 66 2e 0f 1f 84 00 00 00 00 > RSP: 002b:00007fffcb289fc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000081 > RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000433639 > RDX: 00007fffcb289fd0 RSI: 0000000000000000 RDI: 0000000000000000 > RBP: 00000000006b2018 R08: 000000000000004d R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401560 > R13: 00000000004015f0 R14: 0000000000000000 R15: 0000000000000000 I have looked at the other callers of siginmask and they all appear to in locations where sig can not be zero. I have looked at the code generation of adding an extra test against zero and gcc was able with a simple decrement instruction to combine the two tests together. So the at most adding this test cost a single cpu cycle. In practice that decrement instruction was already present as part of the mask comparison, so the only change was when the instruction was executed. So given that it is cheap, and obviously correct to update siginmask to verify the signal is not zero. Fix this issue there to avoid any future problems. Reported-by: Eric Biggers <[email protected]> Fixes: 4ce5f9c ("signal: Use a smaller struct siginfo in the kernel") Signed-off-by: "Eric W. Biederman" <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Jan 7, 2020
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:
ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e MIPS#25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!
This happens in:
static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here
Namely:
__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!
Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.
Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.
This approach was adopted from the commit 72139df ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09 ("chardev: add
helper function to register char devs with a struct device").
Link: https://lore.kernel.org/linux-fsdevel/[email protected]/T/#u
Analyzed-by: Stephen Johnston <[email protected]>
Analyzed-by: Vern Lovejoy <[email protected]>
Signed-off-by: Vladis Dronov <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Sep 28, 2020
Patch series "mm: fix memory to node bad links in sysfs", v3. Sometimes, firmware may expose interleaved memory layout like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] In that case, we can see memory blocks assigned to multiple nodes in sysfs: $ ls -l /sys/devices/system/memory/memory21 total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 -rw-r--r-- 1 root root 65536 Aug 24 05:27 online -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index drwxr-xr-x 2 root root 0 Aug 24 05:27 power -r--r--r-- 1 root root 65536 Aug 24 05:27 removable -rw-r--r-- 1 root root 65536 Aug 24 05:27 state lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones The same applies in the node's directory with a memory21 link in both the node1 and node2's directory. This is wrong but doesn't prevent the system to run. However when later, one of these memory blocks is hot-unplugged and then hot-plugged, the system is detecting an inconsistency in the sysfs layout and a BUG_ON() is raised: kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ MIPS#25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This has been seen on PowerPC LPAR. The root cause of this issue is that when node's memory is registered, the range used can overlap another node's range, thus the memory block is registered to multiple nodes in sysfs. There are two issues here: (a) The sysfs memory and node's layouts are broken due to these multiple links (b) The link errors in link_mem_sections() should not lead to a system panic. To address (a) register_mem_sect_under_node should not rely on the system state to detect whether the link operation is triggered by a hot plug operation or not. This is addressed by the patches 1 and 2 of this series. Issue (b) will be addressed separately. This patch (of 2): The memmap_context enum is used to detect whether a memory operation is due to a hot-add operation or happening at boot time. Make it general to the hotplug operation and rename it as meminit_context. There is no functional change introduced by this patch Suggested-by: David Hildenbrand <[email protected]> Signed-off-by: Laurent Dufour <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: "Rafael J . Wysocki" <[email protected]> Cc: Nathan Lynch <[email protected]> Cc: Scott Cheloha <[email protected]> Cc: Tony Luck <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Sep 28, 2020
In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ MIPS#25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce63 ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by: Laurent Dufour <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Nathan Lynch <[email protected]> Cc: Scott Cheloha <[email protected]> Cc: Tony Luck <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Nov 28, 2020
This fix is for a failure that occurred in the DWARF unwind perf test.
Stack unwinders may probe memory when looking for frames.
Memory sanitizer will poison and track uninitialized memory on the
stack, and on the heap if the value is copied to the heap.
This can lead to false memory sanitizer failures for the use of an
uninitialized value.
Avoid this problem by removing the poison on the copied stack.
The full msan failure with track origins looks like:
==2168==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22
#1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13
#2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
MIPS#16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#24 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10
#1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13
#2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18
#3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
MIPS#16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
MIPS#17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#25 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2
#2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9
#3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6
#4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#17 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events'
#0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445
SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: [email protected]
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandeep Dasgupta <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Feb 5, 2021
We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ MIPS#25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <[email protected]> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9 ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: Pavel Machek <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Mar 22, 2021
After commit 997acaf (lockdep: report broken irq restoration), the guest splatting below during boot: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30 Modules linked in: hid_generic usbhid hid CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ MIPS#25 RIP: 0010:warn_bogus_irq_restore+0x26/0x30 Call Trace: kvm_wait+0x76/0x90 __pv_queued_spin_lock_slowpath+0x285/0x2e0 do_raw_spin_lock+0xc9/0xd0 _raw_spin_lock+0x59/0x70 lockref_get_not_dead+0xf/0x50 __legitimize_path+0x31/0x60 legitimize_root+0x37/0x50 try_to_unlazy_next+0x7f/0x1d0 lookup_fast+0xb0/0x170 path_openat+0x165/0x9b0 do_filp_open+0x99/0x110 do_sys_openat2+0x1f1/0x2e0 do_sys_open+0x5c/0x80 __x64_sys_open+0x21/0x30 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae The new consistency checking, expects local_irq_save() and local_irq_restore() to be paired and sanely nested, and therefore expects local_irq_restore() to be called with irqs disabled. The irqflags handling in kvm_wait() which ends up doing: local_irq_save(flags); safe_halt(); local_irq_restore(flags); instead triggers it. This patch fixes it by using local_irq_disable()/enable() directly. Cc: Thomas Gleixner <[email protected]> Reported-by: Dmitry Vyukov <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Oct 25, 2022
UBSAN complains about array-index-out-of-bounds: [ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41 [ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]' [ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic MIPS#25-Ubuntu [ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010 [ 1.980718] kernel: Call Trace: [ 1.980721] kernel: <TASK> [ 1.980723] kernel: show_stack+0x52/0x58 [ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f [ 1.980734] kernel: dump_stack+0x10/0x12 [ 1.980736] kernel: ubsan_epilogue+0x9/0x45 [ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci] [ 1.980748] kernel: ata_qc_issue+0x135/0x240 [ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580 [ 1.980754] kernel: ? vprintk_default+0x1d/0x20 [ 1.980759] kernel: ata_exec_internal+0x67/0xa0 [ 1.980762] kernel: sata_pmp_read+0x8d/0xc0 [ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90 [ 1.980768] kernel: sata_pmp_attach+0x8b/0x310 [ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0 [ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30 [ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci] [ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci] [ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci] [ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0 [ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560 [ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40 [ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci] [ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600 [ 1.980810] kernel: ata_scsi_error+0x9c/0xd0 [ 1.980813] kernel: scsi_error_handler+0xa1/0x180 [ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0 [ 1.980820] kernel: kthread+0x12a/0x150 [ 1.980823] kernel: ? set_kthread_struct+0x50/0x50 [ 1.980826] kernel: ret_from_fork+0x22/0x30 [ 1.980831] kernel: </TASK> This happens because sata_pmp_init_links() initialize link->pmp up to SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array. I can't find the maximum Enclosure Management ports specified in AHCI spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier Information" can utilize 4 bits, which implies it can support up to 16 ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the issue. BugLink: https://bugs.launchpad.net/bugs/1970074 Cc: [email protected] Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Nov 10, 2022
…der memory pressure When destroying a queue, when calling sock_release, the network stack might need to allocate an skb to send a FIN/RST. When that happens during memory pressure, there is a need to reclaim memory, which in turn may ask the nvme-tcp device to write out dirty pages, however this is not possible due to a ctrl teardown that is going on. Set PF_MEMALLOC to the task that releases the socket to grant access to PF_MEMALLOC reserves. In addition, do the same for the nvme-tcp thread as this may also originate from the swap itself and should be more resilient to memory pressure situations. This fixes the following lockdep complaint: -- ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc2+ MIPS#25 Tainted: G W ------------------------------------------------------ kswapd0/92 is trying to acquire lock: ffff888114003240 (sk_lock-AF_INET-NVME){+.+.}-{0:0}, at: tcp_sendpage+0x23/0xa0 but task is already holding lock: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x11e/0x160 kmem_cache_alloc_node+0x44/0x530 __alloc_skb+0x158/0x230 tcp_send_active_reset+0x7e/0x730 tcp_disconnect+0x1272/0x1ae0 __tcp_close+0x707/0xd90 tcp_close+0x26/0x80 inet_release+0xfa/0x220 sock_release+0x85/0x1a0 nvme_tcp_free_queue+0x1fd/0x470 [nvme_tcp] nvme_do_delete_ctrl+0x130/0x13d [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x356/0x530 vfs_write+0x4e8/0xce0 ksys_write+0xfd/0x1d0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_INET-NVME){+.+.}-{0:0}: __lock_acquire+0x2a0c/0x5690 lock_acquire+0x18e/0x4f0 lock_sock_nested+0x37/0xc0 tcp_sendpage+0x23/0xa0 inet_sendpage+0xad/0x120 kernel_sendpage+0x156/0x440 nvme_tcp_try_send+0x48a/0x2630 [nvme_tcp] nvme_tcp_queue_rq+0xefb/0x17e0 [nvme_tcp] __blk_mq_try_issue_directly+0x452/0x660 blk_mq_plug_issue_direct.constprop.0+0x207/0x700 blk_mq_flush_plug_list+0x6f5/0xc70 __blk_flush_plug+0x264/0x410 blk_finish_plug+0x4b/0xa0 shrink_lruvec+0x1263/0x1ea0 shrink_node+0x736/0x1a80 balance_pgdat+0x740/0x10d0 kswapd+0x5f2/0xaf0 kthread+0x256/0x2f0 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); *** DEADLOCK *** 3 locks held by kswapd0/92: #0: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 #1: ffff88811f21b0b0 (q->srcu){....}-{0:0}, at: blk_mq_flush_plug_list+0x6b3/0xc70 #2: ffff888170b11470 (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0xeb9/0x17e0 [nvme_tcp] Fixes: 3f2304f ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Tested-by: Daniel Wagner <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
pcercuei
pushed a commit
to OpenDingux/linux
that referenced
this issue
Nov 10, 2022
`hostname` needs to be set as null-pointer after free in
`cifs_put_tcp_session` function, or when `cifsd` thread attempts
to resolve hostname and reconnect the host, the thread would deref
the invalid pointer.
Here is one of practical backtrace examples as reference:
Task 477
---------------------------
do_mount
path_mount
do_new_mount
vfs_get_tree
smb3_get_tree
smb3_get_tree_common
cifs_smb3_do_mount
cifs_mount
mount_put_conns
cifs_put_tcp_session
--> kfree(server->hostname)
cifsd
---------------------------
kthread
cifs_demultiplex_thread
cifs_reconnect
reconn_set_ipaddr_from_hostname
--> if (!server->hostname)
--> if (server->hostname[0] == '\0') // !! UAF fault here
CIFS: VFS: cifs_mount failed w/return code = -112
mount error(112): Host is down
BUG: KASAN: use-after-free in reconn_set_ipaddr_from_hostname+0x2ba/0x310
Read of size 1 at addr ffff888108f35380 by task cifsd/480
CPU: 2 PID: 480 Comm: cifsd Not tainted 6.1.0-rc2-00106-gf705792f89dd-dirty MIPS#25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0x85
print_report+0x16c/0x4a3
kasan_report+0x95/0x190
reconn_set_ipaddr_from_hostname+0x2ba/0x310
__cifs_reconnect.part.0+0x241/0x800
cifs_reconnect+0x65f/0xb60
cifs_demultiplex_thread+0x1570/0x2570
kthread+0x2c5/0x380
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7e/0x90
__kmalloc_node_track_caller+0x52/0x1b0
kstrdup+0x3b/0x70
cifs_get_tcp_session+0xbc/0x19b0
mount_get_conns+0xa9/0x10c0
cifs_mount+0xdf/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x10a/0x190
__kmem_cache_free+0xca/0x3f0
cifs_put_tcp_session+0x30c/0x450
cifs_mount+0xf95/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff888108f35380
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 0 bytes inside of
16-byte region [ffff888108f35380, ffff888108f35390)
The buggy address belongs to the physical page:
page:00000000333f8e58 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888108f350e0 pfn:0x108f35
flags: 0x200000000000200(slab|node=0|zone=2)
raw: 0200000000000200 0000000000000000 dead000000000122 ffff8881000423c0
raw: ffff888108f350e0 000000008080007a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888108f35280: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
ffff888108f35300: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
>ffff888108f35380: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
^
ffff888108f35400: fa fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888108f35480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 7be3248 ("cifs: To match file servers, make sure the server hostname matches")
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
When I succeeded in building v3.18.3+ on the ci20 it booted fine but the 2nd CPU sits at 100%
top was reporting rpcbind as 100% (or 50% of total CPU use) when I killed rpcbind the CPU load still did not drop but it was not in any process shown by top...
I was using top with "1" and "I" to show individual CPU stats in the totalled vs non-totalled mode
The text was updated successfully, but these errors were encountered: