Adding new schemas

master-local/all.json

@@ -1587,6 +1587,9 @@
     {
       "$ref": "_definitions.json#/definitions/io.k8s.apiextensions-apiserver.pkg.apis.apiextensions.v1.ServiceReference"
     },
+    {
+      "$ref": "_definitions.json#/definitions/io.k8s.apiextensions-apiserver.pkg.apis.apiextensions.v1.ValidationRule"
+    },
     {
       "$ref": "_definitions.json#/definitions/io.k8s.apiextensions-apiserver.pkg.apis.apiextensions.v1.WebhookClientConfig"
     },

master-local/certificatesigningrequestcondition-certificates-v1.json

@@ -31,7 +31,12 @@
       ]
     },
     "type": {
-      "description": "type of the condition. Known conditions are \"Approved\", \"Denied\", and \"Failed\".\n\nAn \"Approved\" condition is added via the /approval subresource, indicating the request was approved and should be issued by the signer.\n\nA \"Denied\" condition is added via the /approval subresource, indicating the request was denied and should not be issued by the signer.\n\nA \"Failed\" condition is added via the /status subresource, indicating the signer failed to issue the certificate.\n\nApproved and Denied conditions are mutually exclusive. Approved, Denied, and Failed conditions cannot be removed once added.\n\nOnly one condition of a given type is allowed.",
+      "description": "type of the condition. Known conditions are \"Approved\", \"Denied\", and \"Failed\".\n\nAn \"Approved\" condition is added via the /approval subresource, indicating the request was approved and should be issued by the signer.\n\nA \"Denied\" condition is added via the /approval subresource, indicating the request was denied and should not be issued by the signer.\n\nA \"Failed\" condition is added via the /status subresource, indicating the signer failed to issue the certificate.\n\nApproved and Denied conditions are mutually exclusive. Approved, Denied, and Failed conditions cannot be removed once added.\n\nOnly one condition of a given type is allowed.\n\nPossible enum values:\n - `\"Approved\"` Approved indicates the request was approved and should be issued by the signer.\n - `\"Denied\"` Denied indicates the request was denied and should not be issued by the signer.\n - `\"Failed\"` Failed indicates the signer failed to issue the certificate.",
+      "enum": [
+        "Approved",
+        "Denied",
+        "Failed"
+      ],
       "type": [
         "string",
         "null"

master-local/certificatesigningrequestcondition.json

@@ -31,7 +31,12 @@
       ]
     },
     "type": {
-      "description": "type of the condition. Known conditions are \"Approved\", \"Denied\", and \"Failed\".\n\nAn \"Approved\" condition is added via the /approval subresource, indicating the request was approved and should be issued by the signer.\n\nA \"Denied\" condition is added via the /approval subresource, indicating the request was denied and should not be issued by the signer.\n\nA \"Failed\" condition is added via the /status subresource, indicating the signer failed to issue the certificate.\n\nApproved and Denied conditions are mutually exclusive. Approved, Denied, and Failed conditions cannot be removed once added.\n\nOnly one condition of a given type is allowed.",
+      "description": "type of the condition. Known conditions are \"Approved\", \"Denied\", and \"Failed\".\n\nAn \"Approved\" condition is added via the /approval subresource, indicating the request was approved and should be issued by the signer.\n\nA \"Denied\" condition is added via the /approval subresource, indicating the request was denied and should not be issued by the signer.\n\nA \"Failed\" condition is added via the /status subresource, indicating the signer failed to issue the certificate.\n\nApproved and Denied conditions are mutually exclusive. Approved, Denied, and Failed conditions cannot be removed once added.\n\nOnly one condition of a given type is allowed.\n\nPossible enum values:\n - `\"Approved\"` Approved indicates the request was approved and should be issued by the signer.\n - `\"Denied\"` Denied indicates the request was denied and should not be issued by the signer.\n - `\"Failed\"` Failed indicates the signer failed to issue the certificate.",
+      "enum": [
+        "Approved",
+        "Denied",
+        "Failed"
+      ],
       "type": [
         "string",
         "null"

master-local/container-v1.json

@@ -57,7 +57,12 @@
       ]
     },
     "imagePullPolicy": {
-      "description": "Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images",
+      "description": "Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images\n\nPossible enum values:\n - `\"Always\"` means that kubelet always attempts to pull the latest image. Container will fail If the pull fails.\n - `\"IfNotPresent\"` means that kubelet pulls if the image isn't present on disk. Container will fail if the image isn't present and the pull fails.\n - `\"Never\"` means that kubelet never pulls an image, but only uses a local image. Container will fail if the image isn't present",
+      "enum": [
+        "Always",
+        "IfNotPresent",
+        "Never"
+      ],
       "type": [
         "string",
         "null"
@@ -133,7 +138,11 @@
       ]
     },
     "terminationMessagePolicy": {
-      "description": "Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.",
+      "description": "Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.\n\nPossible enum values:\n - `\"FallbackToLogsOnError\"` will read the most recent contents of the container logs for the container status message when the container exits with an error and the terminationMessagePath has no contents.\n - `\"File\"` is the default behavior and will set the container status message to the contents of the container's terminationMessagePath when the container exits.",
+      "enum": [
+        "FallbackToLogsOnError",
+        "File"
+      ],
       "type": [
         "string",
         "null"

master-local/container.json

@@ -57,7 +57,12 @@
       ]
     },
     "imagePullPolicy": {
-      "description": "Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images",
+      "description": "Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images\n\nPossible enum values:\n - `\"Always\"` means that kubelet always attempts to pull the latest image. Container will fail If the pull fails.\n - `\"IfNotPresent\"` means that kubelet pulls if the image isn't present on disk. Container will fail if the image isn't present and the pull fails.\n - `\"Never\"` means that kubelet never pulls an image, but only uses a local image. Container will fail if the image isn't present",
+      "enum": [
+        "Always",
+        "IfNotPresent",
+        "Never"
+      ],
       "type": [
         "string",
         "null"
@@ -133,7 +138,11 @@
       ]
     },
     "terminationMessagePolicy": {
-      "description": "Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.",
+      "description": "Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.\n\nPossible enum values:\n - `\"FallbackToLogsOnError\"` will read the most recent contents of the container logs for the container status message when the container exits with an error and the terminationMessagePath has no contents.\n - `\"File\"` is the default behavior and will set the container status message to the contents of the container's terminationMessagePath when the container exits.",
+      "enum": [
+        "FallbackToLogsOnError",
+        "File"
+      ],
       "type": [
         "string",
         "null"

master-local/containerport-v1.json

@@ -32,7 +32,12 @@
       ]
     },
     "protocol": {
-      "description": "Protocol for port. Must be UDP, TCP, or SCTP. Defaults to \"TCP\".",
+      "description": "Protocol for port. Must be UDP, TCP, or SCTP. Defaults to \"TCP\".\n\nPossible enum values:\n - `\"SCTP\"` is the SCTP protocol.\n - `\"TCP\"` is the TCP protocol.\n - `\"UDP\"` is the UDP protocol.",
+      "enum": [
+        "SCTP",
+        "TCP",
+        "UDP"
+      ],
       "type": [
         "string",
         "null"

master-local/containerport.json

@@ -32,7 +32,12 @@
       ]
     },
     "protocol": {
-      "description": "Protocol for port. Must be UDP, TCP, or SCTP. Defaults to \"TCP\".",
+      "description": "Protocol for port. Must be UDP, TCP, or SCTP. Defaults to \"TCP\".\n\nPossible enum values:\n - `\"SCTP\"` is the SCTP protocol.\n - `\"TCP\"` is the TCP protocol.\n - `\"UDP\"` is the UDP protocol.",
+      "enum": [
+        "SCTP",
+        "TCP",
+        "UDP"
+      ],
       "type": [
         "string",
         "null"

master-local/cronjobspec-batch-v1.json

@@ -2,7 +2,12 @@
   "description": "CronJobSpec describes how the job execution will look like and when it will actually run.",
   "properties": {
     "concurrencyPolicy": {
-      "description": "Specifies how to treat concurrent executions of a Job. Valid values are: - \"Allow\" (default): allows CronJobs to run concurrently; - \"Forbid\": forbids concurrent runs, skipping next run if previous run hasn't finished yet; - \"Replace\": cancels currently running job and replaces it with a new one",
+      "description": "Specifies how to treat concurrent executions of a Job. Valid values are: - \"Allow\" (default): allows CronJobs to run concurrently; - \"Forbid\": forbids concurrent runs, skipping next run if previous run hasn't finished yet; - \"Replace\": cancels currently running job and replaces it with a new one\n\nPossible enum values:\n - `\"Allow\"` allows CronJobs to run concurrently.\n - `\"Forbid\"` forbids concurrent runs, skipping next run if previous hasn't finished yet.\n - `\"Replace\"` cancels currently running job and replaces it with a new one.",
+      "enum": [
+        "Allow",
+        "Forbid",
+        "Replace"
+      ],
       "type": [
         "string",
         "null"

master-local/daemonsetupdatestrategy-apps-v1.json

@@ -6,7 +6,11 @@
       "description": "Rolling update config params. Present only if type = \"RollingUpdate\"."
     },
     "type": {
-      "description": "Type of daemon set update. Can be \"RollingUpdate\" or \"OnDelete\". Default is RollingUpdate.",
+      "description": "Type of daemon set update. Can be \"RollingUpdate\" or \"OnDelete\". Default is RollingUpdate.\n\nPossible enum values:\n - `\"OnDelete\"` Replace the old daemons only when it's killed\n - `\"RollingUpdate\"` Replace the old daemons by new ones using rolling update i.e replace them on each node one after the other.",
+      "enum": [
+        "OnDelete",
+        "RollingUpdate"
+      ],
       "type": [
         "string",
         "null"

master-local/daemonsetupdatestrategy.json

@@ -6,7 +6,11 @@
       "description": "Rolling update config params. Present only if type = \"RollingUpdate\"."
     },
     "type": {
-      "description": "Type of daemon set update. Can be \"RollingUpdate\" or \"OnDelete\". Default is RollingUpdate.",
+      "description": "Type of daemon set update. Can be \"RollingUpdate\" or \"OnDelete\". Default is RollingUpdate.\n\nPossible enum values:\n - `\"OnDelete\"` Replace the old daemons only when it's killed\n - `\"RollingUpdate\"` Replace the old daemons by new ones using rolling update i.e replace them on each node one after the other.",
+      "enum": [
+        "OnDelete",
+        "RollingUpdate"
+      ],
       "type": [
         "string",
         "null"

master-local/deploymentstrategy-apps-v1.json

@@ -6,7 +6,11 @@
       "description": "Rolling update config params. Present only if DeploymentStrategyType = RollingUpdate."
     },
     "type": {
-      "description": "Type of deployment. Can be \"Recreate\" or \"RollingUpdate\". Default is RollingUpdate.",
+      "description": "Type of deployment. Can be \"Recreate\" or \"RollingUpdate\". Default is RollingUpdate.\n\nPossible enum values:\n - `\"Recreate\"` Kill all existing pods before creating new ones.\n - `\"RollingUpdate\"` Replace the old ReplicaSets by new one using rolling update i.e gradually scale down the old ReplicaSets and scale up the new one.",
+      "enum": [
+        "Recreate",
+        "RollingUpdate"
+      ],
       "type": [
         "string",
         "null"

master-local/deploymentstrategy.json

@@ -6,7 +6,11 @@
       "description": "Rolling update config params. Present only if DeploymentStrategyType = RollingUpdate."
     },
     "type": {
-      "description": "Type of deployment. Can be \"Recreate\" or \"RollingUpdate\". Default is RollingUpdate.",
+      "description": "Type of deployment. Can be \"Recreate\" or \"RollingUpdate\". Default is RollingUpdate.\n\nPossible enum values:\n - `\"Recreate\"` Kill all existing pods before creating new ones.\n - `\"RollingUpdate\"` Replace the old ReplicaSets by new one using rolling update i.e gradually scale down the old ReplicaSets and scale up the new one.",
+      "enum": [
+        "Recreate",
+        "RollingUpdate"
+      ],
       "type": [
         "string",
         "null"

master-local/endpointport-v1.json

@@ -24,7 +24,12 @@
       ]
     },
     "protocol": {
-      "description": "The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.",
+      "description": "The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.\n\nPossible enum values:\n - `\"SCTP\"` is the SCTP protocol.\n - `\"TCP\"` is the TCP protocol.\n - `\"UDP\"` is the UDP protocol.",
+      "enum": [
+        "SCTP",
+        "TCP",
+        "UDP"
+      ],
       "type": [
         "string",
         "null"

master-local/endpointslice-discovery-v1.json

@@ -2,7 +2,12 @@
   "description": "EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.",
   "properties": {
     "addressType": {
-      "description": "addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.",
+      "description": "addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.\n\nPossible enum values:\n - `\"FQDN\"` represents a FQDN.\n - `\"IPv4\"` represents an IPv4 Address.\n - `\"IPv6\"` represents an IPv6 Address.",
+      "enum": [
+        "FQDN",
+        "IPv4",
+        "IPv6"
+      ],
       "type": [
         "string",
         "null"

master-local/ephemeralcontainer-v1.json

@@ -57,7 +57,12 @@
       ]
     },
     "imagePullPolicy": {
-      "description": "Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images",
+      "description": "Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images\n\nPossible enum values:\n - `\"Always\"` means that kubelet always attempts to pull the latest image. Container will fail If the pull fails.\n - `\"IfNotPresent\"` means that kubelet pulls if the image isn't present on disk. Container will fail if the image isn't present and the pull fails.\n - `\"Never\"` means that kubelet never pulls an image, but only uses a local image. Container will fail if the image isn't present",
+      "enum": [
+        "Always",
+        "IfNotPresent",
+        "Never"
+      ],
       "type": [
         "string",
         "null"
@@ -140,7 +145,11 @@
       ]
     },
     "terminationMessagePolicy": {
-      "description": "Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.",
+      "description": "Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.\n\nPossible enum values:\n - `\"FallbackToLogsOnError\"` will read the most recent contents of the container logs for the container status message when the container exits with an error and the terminationMessagePath has no contents.\n - `\"File\"` is the default behavior and will set the container status message to the contents of the container's terminationMessagePath when the container exits.",
+      "enum": [
+        "FallbackToLogsOnError",
+        "File"
+      ],
       "type": [
         "string",
         "null"