Skip to content

Update Notes

Jyers edited this page Oct 24, 2021 · 13 revisions

Release notes and precompiled bins can also be found here: Releases

10/24/2021 v2.0.0 - A New Horizon

  • Repo Now 100% Based on Upstream bugfix-2.0.x
  • Updated to Latest Marlin Source
  • New Keyboard System
  • Added Configurable Host Action Commands
  • Fixed Assisted Tramming Center Point

Important: This release may have some major bugs carried over from upstream, nothing should be game-breaking, but be aware of this before you decide to update. For some it may be better to wait for the next release.

7/29/2021 v1.3.5 - New Additions and Important Fixes

  • Fix for Z Offset Adjustment with No Probe Configs
  • Fixed all Regression from Upstream
  • Tuned Temp Watch Settings to Reduce Errors
  • Improved Floating Point Number Display
  • Fixed Build Version
  • Improved Host Prompt Response Handling
  • Added Probe Assisted Tramming
  • Fixed Issues with Mesh Slot Resetting

6/6/2021 v1.3.4 - Important Fixes and Small Additions

  • Fixed Powerloss Recovery
  • Fixed Pause Print Heater Timeout Issue
  • Fixed Preheat Menu for E Move
  • Improved Preheat Menu Functionality
  • Updated Gotcha Icon Pack

5/23/2021 v1.3.3 - Framework Changes and Minor Additions

  • Big Framework Change (#807)
  • New Preheat Mode Selector
  • Added Coordinate Blink if not Homed
  • Added Dedicated Homing Menu
  • Improved the Beeper Disable Option
  • Added Linear Advance Support to Source
  • Ensured Homing Before Leveling
  • Re-added "Next Point" to Manual Tuning
  • Added multiple Mesh Support for UBL
  • Added "Purge More" Option to Filament Change
  • Improved Menu Error Handling
  • Tuned Thermal Protection Values to Reduce Errors

5/2/2021 v1.3.2 - Universal Leveling Menu and Minor Fixes

  • Dedicated Leveling Menu for all Leveling Configs
  • Guided Leveling for Manual UBL
  • New Probe Menu with M48 Option
  • Updated Thermal Runaway Settings
  • Enabled Print Counter
  • Added Degree Symbol to Temps
  • Beeper Setting Saved to EEPROM
  • UI Color Theme Additions
  • Added Filament Change Confirm to Tune Menu
  • Fixed Percent on SD Print Finish

4/18/2021 v1.3.1 - New Settings and Minor Fixes

  • Added Custom Color Themes
  • Added PID Value Inputs
  • Added XY Home Offset Menu
  • Added Beeper Disable Option
  • Added Live Option to Move Menu
  • Enabled Support for EEPROM Editor Plugin
  • Fixed Manual Leveling for Larger Beds
  • Improved Backlight Off Handling
  • Fixed Percent and Time Remaining on Print Finish
  • Fixed Minimum Bed Temp Setting

4/6/2021 v1.3.0 - New Settings and Major Fixes

  • Added LCD Brightness Control
  • Added PID Autotune Menu
  • Fixed Flowrate Adjustment
  • Added Previous Value Option to Manual Mesh
  • Fixed Probing Margins for BL Touch
  • Enabled Emergency Parser
  • Disabled Leveling in Affected Menus
  • Added Z Pos Setting to Manual Leveling Menu
  • Added ABL Leveling Confirmation
  • Fixed Max X Position in Probe Configs
  • Added UBL Preheat Before Probing

3/17/2021 v1.2.2 - Fixes and Improvements

  • Added Support for Displaying Filename During Host Print
  • Added Meatpack Gcode Compression Support
  • Increased UBL Mesh Inset
  • Increased UBL Move Speed
  • Fixed Preheat Hotend Menu Issues
  • Fixed UBL Microstep Options
  • Fixed Serial Connection Issue
  • Fixed PID Tuning Popups Freezing
  • Require Homing after Disabling Steppers

3/8/2021 v1.2.1 - Important UBL Fixes

  • Fixed Auto Tilt Popup Freezing
  • Fixed Mesh View Back Issue

3/7/2021 v1.2.0 - UBL and Major Additions

  • Added UBL Functionality and Menus
  • Fixed Filament Runout Popup Issue
  • Added UI Checkbox for Toggles
  • Fixed SD Print Filename Issue
  • Disabled Mesh when Manual Leveling
  • New Advanced Menu Options
  • __h__m Time Format Setting
  • New Preheat Manager for E Moves and Filament Change
  • Filament Change Support in Precompiled FW
  • Filament Runout Support in Precompiled FW

2/22/2021 v1.1.1 - Config Additions and Minor Fixes

  • Extruder item in move menu now resets on menu draw and item click
  • Fixed version number format in info menu
  • Enabled M48 probe accuracy test
  • Enabled S-curve acceleration
  • Increased probe xy offset limits
  • Restart cooling fan on print resume
  • Fixed reheating done popup issue
  • Fixed Z pos negative value issue

2/17/2021 v1.1.0 - Major Fixes

  • Fixed M73 print progress bug
  • Info menu on main screen is now functional
  • Power loss recovery is now functional
  • Improved icon labels for main menu and print screen
  • Added improved printer kill and thermal runaway popups
  • Reduced move menu extruder feedrate
  • Added another decimal place to Z pos display

2/15/2021 v1.0.0 - Start of Documentation

  • First documented build