Tantillus

Introducing Tantillus. The portable self replicating mini printer.

Please visit www.Tantillus.org for more information

** Please note these files may change without notice **

If you find mistakes or convert it to metric please file a bug report here on GitHub or even better a pull request.

- Derived parts: -
	4   -   Triffidhunter's Printable LM8uu v3 bushings http://www.thingiverse.com/thing:16813

- One piece case (200mm x 200mm x 300mm) -
	1   -   Tantillus.0.2.0.stl

NOTE: See image folder for exploded view of printed case.

- Printed Case files: -

	- Printed case source: -
	Tantillus.0.1.1.blend
	Tantillus.0.1.1_ABS.blend

       1   -   Case top 1
       1   -   Case top 2
       1   -   Case top 3
       1   -   Case top 4
       1   -   Case middle 1
       1   -   Case middle 2
       1   -   Case middle 3
       1   -   Case middle 4
       1   -   Case bottom 1
       1   -   Case bottom 2
       1   -   Case bottom 3
       1   -   Case bottom 4

- Printed case connectors: -

       1   -   Top front connector
       2   -   Top side connectors
       1   -   Rear lower connector
       1   -   Rear upper connector
       3   -   Middle connectors
       3   -   Base connectors
       1   -   Motor mount reinforcement
       4   -   Upper stiffeners

NOTE: Assembled and exploded view stl files are for reference only.


- Axis Parts: -

	1  -  Bowden clamp.stl
	1  -  Carriage bottom.stl
	1  -  Carriage top.stl
	1  -  Endstop_holder.stl
	4  -  Printable-lm8uu-v3.stl
	2  -  XY_end_left.stl
	2  -  XY_end_right.stl
	1  -  Z_arm_1.stl
	1  -  Z_arm_2.stl
	2  -  Z-coupler.stl
	1  -  Z_lift.stl
	1  -  Z_lower_bracket.stl
	1  -  Z_motor_bracket.stl
	1  -  Z_upper_bracket.stl


- Extruder: -

	1  -  Extruder.stl
	1  -  Extruder_idler.stl
	1  -  Extruder_motor_mount_v2.stl 


- Gears: - 

NOTE: 4mm and 5mm denote motor shaft size (use only one size)
NOTE: Or use optional pulleys in Pulley folder

	2  -  Upper gear.stl
	2  -  Motor_gear_(4mm).stl
	or
	2  -  Motor_gear_(5mm).stl
	
- Optional Pulleys -
NOTE: Only use if you are NOT planning on using the above gears
NOTE: Uses 267-3GT-06 belts.
NOTE: #4 is for imperial nuts and grub screws, M4 is for Metric nuts and grub screws
	
	2 - Upper_50T_pulley_(8mm)(nn).stl
	
	and
	
	2 - Motor_40T_pulley_(4mm)(nn).stl
	or
	2 - Motor_40T_pulley_(5mm)(nn).stl
	
- Experimental pulleys -
NOTE: There is a folder with 50 tooth motor pulleys that can be used in place of the 40T ones above.
 But be warned there is no access to the motor bolts and you will be required to use hex bolts or
  figure out some other way of tensioning them.

- Extruder gears -

	1  -  Extruder_large.stl 	(normal gears 2.7:1)
	1  -  Extruder_small_(4mm).stl	(normal gears 2.7:1)
	or
	1  -  Extruder_small_(5mm).stl	(normal gears 2.7:1)

- Laser cut case files: - 

NOTE: STL's are used to produce the DXF's and SVG's and are not for printing.

	All_panels.dxf
	All_panels.stl
	All_panels.svg
	
	Back.dxf
	Back.stl
	Back.svg

	Carriage_middle.dxf
	Carriage_middle.stl
	Carriage_middle.svg

	Front.dxf
	Front.stl
	Front.svg

	Left.dxf
	Left.stl
	Left.svg

	Right.dxf
	Right.stl
	Right.svg

NOTE: Cutting test to confirm fit of tabs and bearings

	Test.dxf
	Test.svg
	test.stl

NOTE: Scad file used to make DXF's from STL's (Inkscape used to convert DXF's to SVG's)

	V3_svg.scad

- Laser cut case corners -
NOTE: You may require scaling these by %1 or %2

	4  -  Corner_bottom.stl
	1  -  Corner_top_front_left.stl
	1  -  Corner_top_front_right.stl
	1  -  Corner_top_rear_left.stl
	1  -  Corner_top_rear_right.stl

- Extras -

NOTE: Not all of these are used for each machine choose wisely
(LC) = Laser cut

	40mm_fanmount_(LC).stl
	50mm_fanmount_(LC).stl
	40mm_Fan_mount_(printed case).stl
	Encoder_knob.stl
	40mm_Fan_duct.stl
	Plug_adapter.stl
	Repraper_spool_a.stl
	Repraper_spool_b.stl
	Spool_holder.stl 	(Esun style spool)
	Spool_holder_long.stl 	(Makerbot spool)
	Spool_holder_mount.stl	(Fits both Esun and Makerbot spool holder)

- Source files -

	Tantillus.0.3.4.blend (laser cut case and all axis parts)

	40mm_Fan_duct.blend
	All_Fanmounts.blend
	Extruder_gears_v2.blend
	Plug_adapter.blend
	Spool_holders.blend
	Tantillus_extruder.blend
	Tantillus_gears.blend
	Cable-Z_and_Printed-case-extensions.blend