Updated and removed using the pi username

README.md

@@ -50,10 +50,9 @@ This will allow you to charge 9 controllers at once through the pi
 Installation
 ---------------------------
 
-0. [Download](https://www.raspberrypi.org/downloads/raspbian/) and [Install](https://www.raspberrypi.org/documentation/installation/installing-images/README.md) Raspbian on the micro SD card, this build was tested on the latest version of the raspberry pi OS, 32 or 64 bit. (when installing please create user with username pi)
+0. [Download](https://www.raspberrypi.org/downloads/raspbian/) and [Install](https://www.raspberrypi.org/documentation/installation/installing-images/README.md) Raspbian on the micro SD card, this build was tested on the latest version of the raspberry pi OS, 32 or 64 bit.
 0. Connect the bluetooth adapters and speaker
 0. Turn on the pi, open a Terminal and run these commands, the pi will reboot on a successful install
-0. If prompted about restarting services select yes
 0. If something goes wrong during instillation, try running setup.sh again.
 
 ```