Dev ip build sep #676
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
name: CI Checks | |
on: | |
push: | |
branches: ["**"] | |
pull_request: | |
branches: ["**"] | |
workflow_dispatch: | |
env: | |
bashPass: \033[32;1mPASSED - | |
bashInfo: \033[33;1mWINFO - | |
bashFail: \033[31;1mFAILED - | |
bashEnd: \033[0m | |
jobs: | |
unittest: | |
runs-on: ubuntu-latest | |
steps: | |
- name: Clone This Repo | |
uses: actions/checkout@v4 | |
with: | |
submodules: recursive | |
- env: | |
stepName: Install Dependencies | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
git submodule update --checkout --init --recursive | |
sudo apt-get update -y | |
sudo apt-get install -y lcov | |
sudo apt-get install -y unifdef | |
sudo apt-get install -y ninja-build | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
# Separate builds for sanitizers and coverage: | |
# These can currently not be combined without branch coverage dilution. | |
- env: | |
stepName: Build Unit Tests (aubsan build) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake --fresh -G Ninja -S test/unit-test -B test/unit-test/build/ -DSANITIZE=address,undefined | |
ninja -C test/unit-test/build/ | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Run Unit Tests (aubsan build) | |
name: ${{ env.stepName }} | |
shell: bash | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
env ASAN_OPTIONS=detect_odr_violation=0 ctest --test-dir test/unit-test/build/ -E system --output-on-failure | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build Unit Tests (coverage build) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake --fresh -G Ninja -S test/unit-test -B test/unit-test/build/ -DSANITIZE= | |
ninja -C test/unit-test/build/ | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Run Unit Tests (coverage build) | |
name: ${{ env.stepName }} | |
shell: bash | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
find test/unit-test/build/ -name '*.gcda' -delete | |
ctest --test-dir test/unit-test/build/ -E system --output-on-failure | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Test Line and Branch Coverage | |
name: ${{ env.stepName }} | |
shell: bash | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake --build test/unit-test/build/ --target coverage | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} Built Coverage Tests ${{ env.bashEnd }}" | |
lcov --list --rc lcov_branch_coverage=1 test/unit-test/build/coverage.info | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- name: Check Coverage | |
uses: FreeRTOS/CI-CD-Github-Actions/coverage-cop@main | |
with: | |
coverage-file: ./test/unit-test/build/coverage.info | |
branch-coverage-min: 100 | |
line-coverage-min: 100 | |
spell-check: | |
runs-on: ubuntu-latest | |
steps: | |
- name: Clone This Repo | |
uses: actions/checkout@v4 | |
- name: Run spellings check | |
uses: FreeRTOS/CI-CD-Github-Actions/spellings@main | |
with: | |
path: ./ | |
exclude-dirs: source/portable/NetworkInterface/STM32 | |
formatting: | |
runs-on: ubuntu-20.04 | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Check formatting | |
uses: FreeRTOS/CI-CD-Github-Actions/formatting@main | |
with: | |
path: ./ | |
exclude-dirs: source/portable/NetworkInterface/STM32 | |
doxygen: | |
runs-on: ubuntu-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Run doxygen build | |
uses: FreeRTOS/CI-CD-Github-Actions/doxygen@main | |
with: | |
path: ./ | |
verify-manifest: | |
runs-on: ubuntu-latest | |
steps: | |
- uses: actions/checkout@v4 | |
with: | |
submodules: true | |
fetch-depth: 0 | |
# At time of writing the gitmodules are set not to pull | |
# Even when using fetch submodules. Need to run this command | |
# To force it to grab them. | |
- name: Perform Recursive Clone | |
shell: bash | |
run: git submodule update --checkout --init --recursive | |
- name: Run manifest verifier | |
uses: FreeRTOS/CI-CD-GitHub-Actions/manifest-verifier@main | |
with: | |
path: ./ | |
fail-on-incorrect-version: true | |
link-verifier: | |
runs-on: ubuntu-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Check Links | |
env: | |
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
uses: FreeRTOS/CI-CD-Github-Actions/link-verifier@main | |
build-checks: | |
runs-on: ubuntu-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- env: | |
stepName: Build Install Dependencies | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
sudo apt-get update -y | |
sudo apt-get install -y libpcap-dev | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Enable all functionalities) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Enable all functionalities IPv4) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV4 | |
cmake --build build --target clean | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Enable all functionalities IPv6) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV6 | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Enable all functionalities IPv4 IPv6) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV4_IPV6 | |
cmake --build build --target clean | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Enable all functionalities IPv4 TCP) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV4_TCP | |
cmake --build build --target clean | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Enable all functionalities IPv6 TCP) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=ENABLE_ALL_IPV6_TCP | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Disable all functionalities) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=DISABLE_ALL | |
cmake --build build --target clean | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Default configuration) | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=DEFAULT_CONF | |
cmake --build build --target clean | |
cmake --build build --target freertos_plus_tcp_build_test | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Build checks (Header Self Contain) | |
shell: bash | |
run: | | |
cmake -S . -B build -DFREERTOS_PLUS_TCP_ENABLE_BUILD_CHECKS=ON -DFREERTOS_PLUS_TCP_TEST_CONFIGURATION=HEADER_SELF_CONTAIN | |
cmake --build build --target clean | |
cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_DHCP | |
cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_DNS | |
cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_IP | |
cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_ND | |
cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_Routing | |
cmake --build build --target freertos_plus_tcp_build_test_FreeRTOS_Sockets | |
cmake --build build --target freertos_plus_tcp_build_test_NetworkBufferManagement | |
cmake --build build --target freertos_plus_tcp_build_test_NetworkInterface | |
complexity: | |
runs-on: ubuntu-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- env: | |
stepName: Setup | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
sudo apt-get install complexity | |
sudo apt-get install uncrustify | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Complexity | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
COMPLEXITY_PARAMS="--scores --threshold=10 --horrid-threshold=283" | |
TEMP_DIR=./temp | |
mkdir -p ${TEMP_DIR} | |
for SOURCE_FILE in source/portable/BufferManagement/*.c source/*.c | |
do | |
TARGET_DIR=${TEMP_DIR}/`dirname ${SOURCE_FILE}` | |
TARGET_FILE=${TARGET_DIR}/`basename ${SOURCE_FILE}` | |
mkdir -p ${TARGET_DIR} | |
uncrustify -c tools/uncrustify.complexity.cfg -f ${SOURCE_FILE} > ${TARGET_FILE} | |
done | |
find ${TEMP_DIR} -iname '*.c' | xargs complexity ${COMPLEXITY_PARAMS} | |
RESULT=$? | |
rm -rf ${TEMP_DIR} | |
echo "::endgroup::" | |
if [ "${RESULT}" = "0" ]; then | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
exit 0 | |
else | |
echo -e "${{ env.bashFail }} Sources are too complex, rc = ${RESULT} ${{ env.bashEnd }}" | |
echo -e "${{ env.bashFail }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
exit 1 | |
fi | |
git-secrets: | |
runs-on: ubuntu-latest | |
steps: | |
- uses: actions/checkout@v4 | |
with: | |
submodules: recursive | |
- name: Checkout awslabs/git-secrets | |
uses: actions/checkout@v4 | |
with: | |
repository: awslabs/git-secrets | |
ref: master | |
path: git-secrets | |
- env: | |
stepName: Install git-secrets | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
cd git-secrets && sudo make install && cd .. | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- env: | |
stepName: Run git-secrets | |
name: ${{ env.stepName }} | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
git-secrets --register-aws | |
git-secrets --scan | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
proof_ci: | |
if: ${{ github.event.pull_request }} | |
runs-on: cbmc_ubuntu-latest_16-core | |
steps: | |
- name: Set up CBMC runner | |
uses: FreeRTOS/CI-CD-Github-Actions/set_up_cbmc_runner@main | |
with: | |
cbmc_version: "6.3.1" | |
- env: | |
stepName: Install Dependencies | |
name: ${{ env.stepName }} | |
shell: bash | |
run: | | |
# ${{ env.stepName }} | |
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
git submodule update --init --checkout --recursive | |
sudo apt-get update | |
sudo apt-get install --yes --no-install-recommends gcc-multilib | |
echo "::endgroup::" | |
echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}" | |
- name: Run CBMC | |
uses: FreeRTOS/CI-CD-Github-Actions/run_cbmc@main | |
with: | |
proofs_dir: test/cbmc/proofs |