Update URL documentation links to support site (#4781)

CITATION.cff

@@ -9,4 +9,4 @@ authors:
     website: 'https://www.hdfgroup.org'
 repository-code: 'https://github.com/HDFGroup/hdf5'
 url: 'https://www.hdfgroup.org/HDF5/'
-repository-artifact: 'https://www.hdfgroup.org/downloads/hdf5/'
+repository-artifact: 'https://support.hdfgroup.org/downloads/HDF5'

HDF5Examples/README.md

@@ -48,17 +48,17 @@ HDF5 SNAPSHOTS, PREVIOUS RELEASES AND SOURCE CODE
 --------------------------------------------
 Full Documentation and Programming Resources for this HDF5 can be found at
 
-   https://portal.hdfgroup.org/documentation/index.html
+   https://support.hdfgroup.org/documentation/HDF5/index.html
 
 Periodically development code snapshots are provided at the following URL:
-    
-   https://gamma.hdfgroup.org/ftp/pub/outgoing/hdf5/snapshots/
+
+   https://github.com/HDFGroup/hdf5/releases
 
 Source packages for current and previous releases are located at:
-    
-   https://portal.hdfgroup.org/downloads/
+
+   https://support.hdfgroup.org/releases/hdf5/downloads/
 
 Development code is available at our Github location:
-    
+
    https://github.com/HDFGroup/hdf5.git
 

README.md

@@ -108,7 +108,7 @@ Periodically development code snapshots are provided at the following URL:
 
 Source packages for current and previous releases are located at:
 
-   https://portal.hdfgroup.org/Downloads
+   https://support.hdfgroup.org/downloads/HDF5
 
 Development code is available at our Github location:
 

config/cmake/README.md.cmake.in

@@ -75,6 +75,6 @@ For more information see USING_CMake_Examples.txt in the install folder.
 ===========================================================================
 
 Documentation for this release can be found at the following URL:
-    https://portal.hdfgroup.org/documentation/index.html#hdf5
+    https://support.hdfgroup.org/hdf5/@HDF5_PACKAGE_NAME@-@HDF5_PACKAGE_VERSION@/documentation/doxygen/index.html
 
 Bugs should be reported to [email protected].

doc/parallel-compression.md

@@ -64,9 +64,9 @@ H5Dwrite(..., dxpl_id, ...);
 The following are two simple examples of using the parallel
 compression feature:
 
-[ph5_filtered_writes.c](https://github.com/HDFGroup/hdf5/blob/develop/HDF5Examples/C/H5PAR/ph5_filtered_writes.c)
+[ph5_filtered_writes.c][u1]
 
-[ph5_filtered_writes_no_sel.c](https://github.com/HDFGroup/hdf5/blob/develop/HDF5Examples/C/H5PAR/ph5_filtered_writes_no_sel.c)
+[ph5_filtered_writes_no_sel.c][u2]
 
 The former contains simple examples of using the parallel
 compression feature to write to compressed datasets, while the
@@ -79,7 +79,7 @@ participate in the collective write call.
 ## Multi-dataset I/O support
 
 The parallel compression feature is supported when using the
-multi-dataset I/O API routines ([H5Dwrite_multi](https://hdfgroup.github.io/hdf5/develop/group___h5_d.html#gaf6213bf3a876c1741810037ff2bb85d8)/[H5Dread_multi](https://hdfgroup.github.io/hdf5/develop/group___h5_d.html#ga8eb1c838aff79a17de385d0707709915)), but the
+multi-dataset I/O API routines ([H5Dwrite_multi][u3]/[H5Dread_multi][u4]), but the
 following should be kept in mind:
 
  - Parallel writes to filtered datasets **must** still be collective,
@@ -99,7 +99,7 @@ following should be kept in mind:
 
 ## Incremental file space allocation support
 
-HDF5's [file space allocation time](https://hdfgroup.github.io/hdf5/develop/group___d_c_p_l.html#ga85faefca58387bba409b65c470d7d851)
+HDF5's [file space allocation time][u5]
 is a dataset creation property that can have significant effects
 on application performance, especially if the application uses
 parallel HDF5. In a serial HDF5 application, the default file space
@@ -118,20 +118,20 @@ While this strategy has worked in the past, it has some noticeable
 drawbacks. For one, the larger the chunked dataset being created,
 the more noticeable overhead there will be during dataset creation
 as all of the data chunks are being allocated in the HDF5 file.
-Further, these data chunks will, by default, be [filled](https://hdfgroup.github.io/hdf5/develop/group___d_c_p_l.html#ga4335bb45b35386daa837b4ff1b9cd4a4)
+Further, these data chunks will, by default, be [filled][u6]
 with HDF5's default fill data value, leading to extraordinary
 dataset creation overhead and resulting in pre-filling large
 portions of a dataset that the application might have been planning
 to overwrite anyway. Even worse, there will be more initial overhead
 from compressing that fill data before writing it out, only to have
 it read back in, unfiltered and modified the first time a chunk is
 written to. In the past, it was typically suggested that parallel
-HDF5 applications should use [H5Pset_fill_time](https://hdfgroup.github.io/hdf5/develop/group___d_c_p_l.html#ga6bd822266b31f86551a9a1d79601b6a2)
+HDF5 applications should use [H5Pset_fill_time][u7]
 with a value of `H5D_FILL_TIME_NEVER` in order to disable writing of
 the fill value to dataset chunks, but this isn't ideal if the
 application actually wishes to make use of fill values. 
 
-With [improvements made](https://www.hdfgroup.org/2022/03/parallel-compression-improvements-in-hdf5-1-13-1/)
+With [improvements made][u8]
 to the parallel compression feature for the HDF5 1.13.1 release,
 "incremental" file space allocation is now the default for datasets
 created in parallel *only if they have filters applied to them*.
@@ -154,7 +154,7 @@ optimal performance out of the parallel compression feature.
 
 ### Begin with a good chunking strategy
 
-[Starting with a good chunking strategy](https://portal.hdfgroup.org/documentation/hdf5-docs/chunking_in_hdf5.html)
+[Starting with a good chunking strategy][u9]
 will generally have the largest impact on overall application
 performance. The different chunking parameters can be difficult
 to fine-tune, but it is essential to start with a well-performing
@@ -166,7 +166,7 @@ chosen chunk size becomes a very important factor when compression
 is involved, as data chunks have to be completely read and
 re-written to perform partial writes to the chunk.
 
-[Improving I/O performance with HDF5 compressed datasets](https://docs.hdfgroup.org/archive/support/HDF5/doc/TechNotes/TechNote-HDF5-ImprovingIOPerformanceCompressedDatasets.pdf)
+[Improving I/O performance with HDF5 compressed datasets][u10]
 is a useful reference for more information on getting good
 performance when using a chunked dataset layout.
 
@@ -220,14 +220,14 @@ chunks to end up at addresses in the file that do not align
 well with the underlying file system, possibly leading to
 poor performance. As an example, Lustre performance is generally
 good when writes are aligned with the chosen stripe size.
-The HDF5 application can use [H5Pset_alignment](https://hdfgroup.github.io/hdf5/develop/group___f_a_p_l.html#gab99d5af749aeb3896fd9e3ceb273677a)
+The HDF5 application can use [H5Pset_alignment][u11]
 to have a bit more control over where objects in the HDF5
 file end up. However, do note that setting the alignment
 of objects generally wastes space in the file and has the
 potential to dramatically increase its resulting size, so
 caution should be used when choosing the alignment parameters.
 
-[H5Pset_alignment](https://hdfgroup.github.io/hdf5/develop/group___f_a_p_l.html#gab99d5af749aeb3896fd9e3ceb273677a)
+[H5Pset_alignment][u11]
 has two parameters that control the alignment of objects in
 the HDF5 file, the "threshold" value and the alignment
 value. The threshold value specifies that any object greater
@@ -264,19 +264,19 @@ in a file, this can create significant amounts of free space
 in the file over its lifetime and eventually cause performance
 issues.
 
-An HDF5 application can use [H5Pset_file_space_strategy](https://hdfgroup.github.io/hdf5/develop/group___f_c_p_l.html#ga167ff65f392ca3b7f1933b1cee1b9f70)
+An HDF5 application can use [H5Pset_file_space_strategy][u12]
 with a value of `H5F_FSPACE_STRATEGY_PAGE` to enable the paged
 aggregation feature, which can accumulate metadata and raw
 data for dataset data chunks into well-aligned, configurably
 sized "pages" for better performance. However, note that using
 the paged aggregation feature will cause any setting from
-[H5Pset_alignment](https://hdfgroup.github.io/hdf5/develop/group___f_a_p_l.html#gab99d5af749aeb3896fd9e3ceb273677a)
+[H5Pset_alignment][u11]
 to be ignored. While an application should be able to get
-comparable performance effects by [setting the size of these pages](https://hdfgroup.github.io/hdf5/develop/group___f_c_p_l.html#gad012d7f3c2f1e1999eb1770aae3a4963) to be equal to the value that
-would have been set for [H5Pset_alignment](https://hdfgroup.github.io/hdf5/develop/group___f_a_p_l.html#gab99d5af749aeb3896fd9e3ceb273677a),
+comparable performance effects by [setting the size of these pages][u13]
+to be equal to the value that would have been set for [H5Pset_alignment][u11],
 this may not necessarily be the case and should be studied.
 
-Note that [H5Pset_file_space_strategy](https://hdfgroup.github.io/hdf5/develop/group___f_c_p_l.html#ga167ff65f392ca3b7f1933b1cee1b9f70)
+Note that [H5Pset_file_space_strategy][u12]
 has a `persist` parameter. This determines whether or not the
 file free space manager should include extra metadata in the
 HDF5 file about free space sections in the file. If this
@@ -300,12 +300,12 @@ hid_t file_id = H5Fcreate("file.h5", H5F_ACC_TRUNC, fcpl_id, fapl_id);
 
 While the parallel compression feature requires that the HDF5
 application set and maintain collective I/O at the application
-interface level (via [H5Pset_dxpl_mpio](https://hdfgroup.github.io/hdf5/develop/group___d_x_p_l.html#ga001a22b64f60b815abf5de8b4776f09e)),
+interface level (via [H5Pset_dxpl_mpio][u14]),
 it does not require that the actual MPI I/O that occurs at
 the lowest layers of HDF5 be collective; independent I/O may
 perform better depending on the application I/O patterns and
 parallel file system performance, among other factors. The
-application may use [H5Pset_dxpl_mpio_collective_opt](https://hdfgroup.github.io/hdf5/develop/group___d_x_p_l.html#gacb30d14d1791ec7ff9ee73aa148a51a3)
+application may use [H5Pset_dxpl_mpio_collective_opt][u15]
 to control this setting and see which I/O method provides the
 best performance.
 
@@ -318,7 +318,7 @@ H5Dwrite(..., dxpl_id, ...);
 
 ### Runtime HDF5 Library version
 
-An HDF5 application can use the [H5Pset_libver_bounds](https://hdfgroup.github.io/hdf5/develop/group___f_a_p_l.html#gacbe1724e7f70cd17ed687417a1d2a910)
+An HDF5 application can use the [H5Pset_libver_bounds][u16]
 routine to set the upper and lower bounds on library versions
 to use when creating HDF5 objects. For parallel compression
 specifically, setting the library version to the latest available
@@ -332,3 +332,20 @@ H5Pset_libver_bounds(fapl_id, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST);
 hid_t file_id = H5Fcreate("file.h5", H5F_ACC_TRUNC, H5P_DEFAULT, fapl_id);
 ...
 ```
+
+[u1]: https://github.com/HDFGroup/hdf5/blob/develop/HDF5Examples/C/H5PAR/ph5_filtered_writes.c
+[u2]: https://github.com/HDFGroup/hdf5/blob/develop/HDF5Examples/C/H5PAR/ph5_filtered_writes_no_sel.c
+[u3]: https://hdfgroup.github.io/hdf5/develop/group___h5_d.html#gaf6213bf3a876c1741810037ff2bb85d8
+[u4]: https://hdfgroup.github.io/hdf5/develop/group___h5_d.html#ga8eb1c838aff79a17de385d0707709915
+[u5]: https://hdfgroup.github.io/hdf5/develop/group___d_c_p_l.html#ga85faefca58387bba409b65c470d7d851
+[u6]: https://hdfgroup.github.io/hdf5/develop/group___d_c_p_l.html#ga4335bb45b35386daa837b4ff1b9cd4a4
+[u7]: https://hdfgroup.github.io/hdf5/develop/group___d_c_p_l.html#ga6bd822266b31f86551a9a1d79601b6a2
+[u8]: https://support.hdfgroup.org/documentation/HDF5/parallel-compression-improvements-in-hdf5-1-13-1
+[u9]: https://support.hdfgroup.org/documentation/HDF5/chunking_in_hdf5.html
+[u10]: https://support.hdfgroup.org/documentation/HDF5/technotes/TechNote-HDF5-ImprovingIOPerformanceCompressedDatasets.pdf
+[u11]: https://hdfgroup.github.io/hdf5/develop/group___f_a_p_l.html#gab99d5af749aeb3896fd9e3ceb273677a
+[u12]: https://hdfgroup.github.io/hdf5/develop/group___f_c_p_l.html#ga167ff65f392ca3b7f1933b1cee1b9f70
+[u13]: https://hdfgroup.github.io/hdf5/develop/group___f_c_p_l.html#gad012d7f3c2f1e1999eb1770aae3a4963
+[u14]: https://hdfgroup.github.io/hdf5/develop/group___d_x_p_l.html#ga001a22b64f60b815abf5de8b4776f09e
+[u15]: https://hdfgroup.github.io/hdf5/develop/group___d_x_p_l.html#gacb30d14d1791ec7ff9ee73aa148a51a3
+[u16]: https://hdfgroup.github.io/hdf5/develop/group___f_a_p_l.html#gacbe1724e7f70cd17ed687417a1d2a910

doxygen/aliases

@@ -4,17 +4,16 @@ ALIASES += THG="The HDF Group"
 # Default URLs             (Note that md files do not use any aliases)
 ################################################################################
 # Default URL for HDF Group Files
-ALIASES += HDFURL="docs.hdfgroup.org/hdf5"
+ALIASES += HDFURL="support.hdfgroup.org"
 # URL for archived files
-ALIASES += ARCURL="docs.hdfgroup.org/archive/support/HDF5/doc"
+ALIASES += ARCURL="\HDFURL/archive/support/HDF5/doc"
 # URL for RFCs
-ALIASES += RFCURL="docs.hdfgroup.org/hdf5/rfc"
+ALIASES += RFCURL="\HDFURL/hdf5/rfc"
 # URL for documentation
-ALIASES += DSPURL="portal.hdfgroup.org/display/HDF5"
-ALIASES += DOCURL="portal.hdfgroup.org/documentation/hdf5-docs"
+ALIASES += DOCURL="\HDFURL/releases/hdf5/documentation"
 # URL for downloads
-ALIASES += DWNURL="portal.hdfgroup.org/downloads"
-ALIASES += AEXURL="support.hdfgroup.org/ftp/HDF5/examples"
+ALIASES += DWNURL="\HDFURL/releases/hdf5/downloads"
+ALIASES += AEXURL="\HDFURL/archive/support/ftp/HDF5/examples"
 # doxygen subdir (develop, v1_14)
 ALIASES += DOXURL="hdfgroup.github.io/hdf5/develop"
 #branch name (develop, hdf5_1_14)
@@ -259,13 +258,13 @@ ALIASES += sa_metadata_ops="\sa \li H5Pget_all_coll_metadata_ops() \li H5Pget_co
 
 ALIASES += ref_cons_semantics="<a href=\"https://\RFCURL/RFC%20PHDF5%20Consistency%20Semantics%20MC%20120328.docx.pdf\">Enabling a Strict Consistency Semantics Model in Parallel HDF5</a>"
 ALIASES += ref_file_image_ops="<a href=\"https://\RFCURL/HDF5FileImageOperations.pdf\">HDF5 File Image Operations</a>"
-ALIASES += ref_filter_pipe="<a href=\"https://\DSPURL/HDF5+Data+Flow+Pipeline+for+H5Dread\">Data Flow Pipeline for H5Dread()</a>"
+ALIASES += ref_filter_pipe="<a href=\"https://\DOCURL/HDF5+Data+Flow+Pipeline+for+H5Dread\">Data Flow Pipeline for H5Dread()</a>"
 ALIASES += ref_group_impls="<a href=\"https://\DOXURL/group___h5_g.html\">Group implementations in HDF5</a>"
 ALIASES += ref_h5lib_relver="<a href=\"https://\ARCURL/TechNotes/Version.html\">HDF5 Library Release Version Numbers</a>"
-ALIASES += ref_mdc_in_hdf5="<a href=\"https://\DSPURL/Metadata+Caching+in+HDF5\">Metadata Caching in HDF5</a>"
-ALIASES += ref_mdc_logging="<a href=\"https://\DSPURL/H5F_START_MDC_LOGGING\">Metadata Cache Logging</a>"
+ALIASES += ref_mdc_in_hdf5="<a href=\"https://\DOCURL/Metadata+Caching+in+HDF5\">Metadata Caching in HDF5</a>"
+ALIASES += ref_mdc_logging="<a href=\"https://\DOCURL/H5F_START_MDC_LOGGING\">Metadata Cache Logging</a>"
 ALIASES += ref_news_112="<a href=\"https://\DOCURL/release_specifics/new_features_1_12.html\">New Features in HDF5 Release 1.12</a>"
-ALIASES += ref_h5ocopy="<a href=\"https://\DSPURL/Copying+Committed+Datatypes+with+H5Ocopy\">Copying Committed Datatypes with H5Ocopy()</a>"
+ALIASES += ref_h5ocopy="<a href=\"https://\DOCURL/Copying+Committed+Datatypes+with+H5Ocopy\">Copying Committed Datatypes with H5Ocopy()</a>"
 ALIASES += ref_sencode_fmt_change="<a href=\"https://\RFCURL/H5Sencode_format.docx.pdf\">RFC H5Sencode() / H5Sdecode() Format Change</a>"
 ALIASES += ref_vlen_strings="\Emph{Creating variable-length string datatypes}"
 ALIASES += ref_vol_doc="VOL documentation"

doxygen/dox/About.dox

@@ -83,7 +83,7 @@ as a general reference.
 
 All custom commands for this project are located in the
 <a href="https://\SRCURL/doxygen/aliases"><tt>aliases</tt></a>
-file in the <a href="https://github.com/HDFGroup/hdf5/tree/develop/doxygen"><tt>doxygen</tt></a>
+file in the <a href="https://\SRCURL/doxygen"><tt>doxygen</tt></a>
 subdirectory of the <a href="https://github.com/HDFGroup/hdf5">main HDF5 repo</a>.
 
 The custom commands are grouped in sections. Find a suitable section for your command or

doxygen/dox/DDLBNF110.dox

@@ -1,7 +1,5 @@
 /** \page DDLBNF110 DDL in BNF through HDF5 1.10
 
-\todo Revise this & break it up!
-
 \section intro110 Introduction
 
 This document contains the data description language (DDL) for an HDF5 file. The

doxygen/dox/DDLBNF112.dox

@@ -1,7 +1,5 @@
 /** \page DDLBNF112 DDL in BNF for HDF5 1.12 through HDF5 1.14.3
 
-\todo Revise this & break it up!
-
 \section intro112 Introduction
 
 This document contains the data description language (DDL) for an HDF5 file. The

doxygen/dox/DDLBNF114.dox

@@ -1,7 +1,5 @@
 /** \page DDLBNF114 DDL in BNF for HDF5 1.14.4 and above
 
-\todo Revise this & break it up!
-
 \section intro114 Introduction
 
 This document contains the data description language (DDL) for an HDF5 file. The