Update 5.4-2.1.x-imx up to v5.4.115 #320
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit cd29fa7 upstream. The current code returns the syscall number which an invalid syscall number is supplied and tracing is enabled. This makes the strace testsuite fail. Signed-off-by: Sven Schnelle <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1895132 [krzysztof: adjusted the backport around missing ifdef CONFIG_SECCOMP, add Link and Fixes; apparently this should go with the referenced commit] Fixes: 00332c1 ("s390/ptrace: pass invalid syscall numbers to tracing") Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit ddd8d94 ] As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a58 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen <[email protected]> Cc: Adam Ford <[email protected]> Cc: Andreas Kemnade <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Peter Ujfalusi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Acked-by: Grygorii Strashko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 196d941 ] When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly. Fixes: e66ff71 ("pinctrl: lewisburg: Update pin list according to v1.1v6") Signed-off-by: Yuanyuan Zhong <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4d09ccc ] Commit 941432d ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module, along the way with the Pine64-LTS, which share the same base .dtsi. This was based on the observation that the Pine64-LTS has as "push-push" SD card socket, and that the schematic mentions the card detect GPIO. After having received two reports about failing SD card access with that patch, some more research and polls on that subject revealed that there are at least two different versions of the Pine64-LTS out there: - On some boards (including mine) the card detect pin is "stuck" at high, regardless of an microSD card being inserted or not. - On other boards the card-detect is working, but is active-high, by virtue of an explicit inverter circuit, as shown in the schematic. To cover all versions of the board out there, and don't take any chances, let's revert the introduction of the active-low CD GPIO, but let's use the broken-cd property for the Pine64-LTS this time. That should avoid regressions and should work for everyone, even allowing SD card changes now. The SOPine card detect has proven to be working, so let's keep that GPIO in place. Fixes: 941432d ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") Reported-by: Michael Weiser <[email protected]> Reported-by: Daniel Kulesz <[email protected]> Suggested-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Andre Przywara <[email protected]> Tested-by: Michael Weiser <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 84a24bf ] While this code is executed with the wait_lock held, a reader can acquire the lock without holding wait_lock. The writer side loops checking the value with the atomic_cond_read_acquire(), but only truly acquires the lock when the compare-and-exchange is completed successfully which isn’t ordered. This exposes the window between the acquire and the cmpxchg to an A-B-A problem which allows reads following the lock acquisition to observe values speculatively before the write lock is truly acquired. We've seen a problem in epoll where the reader does a xchg while holding the read lock, but the writer can see a value change out from under it. Writer | Reader -------------------------------------------------------------------------------- ep_scan_ready_list() | |- write_lock_irq() | |- queued_write_lock_slowpath() | |- atomic_cond_read_acquire() | | read_lock_irqsave(&ep->lock, flags); --> (observes value before unlock) | chain_epi_lockless() | | epi->next = xchg(&ep->ovflist, epi); | | read_unlock_irqrestore(&ep->lock, flags); | | | atomic_cmpxchg_relaxed() | |-- READ_ONCE(ep->ovflist); | A core can order the read of the ovflist ahead of the atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire semantics addresses this issue at which point the atomic_cond_read can be switched to use relaxed semantics. Fixes: b519b56 ("locking/qrwlock: Use atomic_cond_read_acquire() when spinning in qrwlock") Signed-off-by: Ali Saidi <[email protected]> [peterz: use try_cmpxchg()] Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Steve Capper <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Waiman Long <[email protected]> Tested-by: Steve Capper <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9d48015 ] There may be a kernel panic on the Haswell server and the Broadwell server, if the snbep_pci2phy_map_init() return error. The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to detect the existence of the SBOX, which is a MSR type of PMON unit. The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the snbep_pci2phy_map_init() returns error, perf doesn't initialize the PCI type of the PMON units, so the uncore_extra_pci_dev will not be allocated. But perf may continue initializing the MSR type of PMON units. A null dereference kernel panic will be triggered. The sockets in a Haswell server or a Broadwell server are identical. Only need to detect the existence of the SBOX once. Current perf probes all available PCU devices and stores them into the uncore_extra_pci_dev. It's unnecessary. Use the pci_get_device() to replace the uncore_extra_pci_dev. Only detect the existence of the SBOX on the first available PCU device once. Factor out hswep_has_limit_sbox(), since the Haswell server and the Broadwell server uses the same way to detect the existence of the SBOX. Add some macros to replace the magic number. Fixes: 5306c31 ("perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes") Reported-by: Steve Wahl <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Steve Wahl <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4b2f1e5 ] The only stepping of Broadwell Xeon parts is stepping 1. Fix the relevant isolation_ucodes[] entry, which previously enumerated stepping 2. Although the original commit was characterized as an optimization, it is also a workaround for a correctness issue. If a PMI arrives between kvm's call to perf_guest_get_msrs() and the subsequent VM-entry, a stale value for the IA32_PEBS_ENABLE MSR may be restored at the next VM-exit. This is because, unbeknownst to kvm, PMI throttling may clear bits in the IA32_PEBS_ENABLE MSR. CPUs with "PEBS isolation" don't suffer from this issue, because perf_guest_get_msrs() doesn't report the IA32_PEBS_ENABLE value. Fixes: 9b545c0 ("perf/x86/kvm: Avoid unnecessary work in guest filtering") Signed-off-by: Jim Mattson <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Peter Shier <[email protected]> Acked-by: Andi Kleen <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b14585d ] In the function auxtrace_parse_snapshot_options(), the callback pointer "itr->parse_snapshot_options" can be NULL if it has not been set during the AUX record initialization. This can cause tool crashing if the callback pointer "itr->parse_snapshot_options" is dereferenced without performing NULL check. Add a NULL check for the pointer "itr->parse_snapshot_options" before invoke the callback. Fixes: d20031b ("perf tools: Add AUX area tracing Snapshot Mode") Signed-off-by: Leo Yan <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Tiezhu Yang <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 36b87cf ] Add 1 additional hammer-like device. Signed-off-by: Shou-Chieh Hsu <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fa8ba6e ] When input_register_device() fails, no error return code is assigned. To fix this bug, ret is assigned with -ENOENT as error return code. Reported-by: TOTE Robot <[email protected]> Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e29c62f ] Fix the following coccicheck warnings: ./drivers/hid/wacom_wac.c:2536:2-6: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Zhong <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a1ebdb3 ] Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped around with commit 21b2cec ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4"). Let's fix the issue with aliases as discussed on the mailing lists. While the mmc aliases should be board specific, let's first fix the issue with minimal changes. Cc: Aaro Koskinen <[email protected]> Cc: Peter Ujfalusi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 6628ddf ] Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure is large enough to include IPv4 or IPv6 header, and reject if not. The geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Signed-off-by: Phillip Potter <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a994edd ] Currently psw_idle does not allocate a stack frame and does not save its r14 and r15 into the save area. Even though this is valid from call ABI point of view, because psw_idle does not make any calls explicitly, in reality psw_idle is an entry point for controlled transition into serving interrupts. So, in practice, psw_idle stack frame is analyzed during stack unwinding. Depending on build options that r14 slot in the save area of psw_idle might either contain a value saved by previous sibling call or complete garbage. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs ([task 0000038000003dd8] 0x0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 So, to make a stacktrace nicer and actually point for the real caller of psw_idle in this frequently occurring case, make psw_idle save its r14. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs ([task 0000038000003dd8] arch_cpu_idle+0x3c/0xd0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 Reviewed-by: Sven Schnelle <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2afeec0 ] The logic in connect() is currently written with the assumption that xenbus_watch_pathfmt() will return an error for a node that does not exist. This assumption is incorrect: xenstore does allow a watch to be registered for a nonexistent node (and will send notifications should the node be subsequently created). As of commit 1f25657 ("xen-netback: remove 'hotplug-status' once it has served its purpose"), this leads to a failure when a domU transitions into XenbusStateConnected more than once. On the first domU transition into Connected state, the "hotplug-status" node will be deleted by the hotplug_status_changed() callback in dom0. On the second or subsequent domU transition into Connected state, the hotplug_status_changed() callback will therefore never be invoked, and so the backend will remain stuck in InitWait. This failure prevents scenarios such as reloading the xen-netfront module within a domU, or booting a domU via iPXE. There is unfortunately no way for the domU to work around this dom0 bug. Fix by explicitly checking for existence of the "hotplug-status" node, thereby creating the behaviour that was previously assumed to exist. Signed-off-by: Michael Brown <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 416dcc5 ] Fix the following coccicheck warning: ./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28: duplicated argument to & or | The CN6XXX_INTR_M1UPB0_ERR here is duplicate. Here should be CN6XXX_INTR_M1UNB0_ERR. Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d199161 ] e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in arch/csky/Kconfig. The symbol in e1000 has been around longer, so change arch/csky/ to use DRAM_BASE instead of RAM_BASE to remove the conflict. (although e1000 is also a 2-line change) Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Acked-by: Guo Ren <[email protected]> Cc: Jesse Brandeburg <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e2af9da ] Fix IA64 discontig.c Section mismatch warnings. When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions computer_pernodesize() and scatter_node_data() should not be marked as __meminit because they are needed after init, on any memory hotplug event. Also, early_nr_cpus_node() is called by compute_pernodesize(), so early_nr_cpus_node() cannot be __meminit either. WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize() The function arch_alloc_nodedata() references the function __meminit compute_pernodesize(). This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data() The function arch_refresh_nodedata() references the function __meminit scatter_node_data(). This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node() The function compute_pernodesize() references the function __meminit early_nr_cpus_node(). This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Randy Dunlap <[email protected]> Cc: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f4bf09d ] The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf failing to build: CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o In file included from /usr/src/linux/tools/include/asm/barrier.h:24, from /usr/src/linux/tools/include/linux/ring_buffer.h:4, from libbpf.c:37: /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror] 43 | #define ia64_mf() asm volatile ("mf" ::: "memory") | In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20, from /usr/include/ia64-linux-gnu/asm/swab.h:11, from /usr/include/linux/swab.h:8, from /usr/include/linux/byteorder/little_endian.h:13, from /usr/include/ia64-linux-gnu/asm/byteorder.h:5, from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20, from libbpf.c:36: /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition 382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory") | cc1: all warnings being treated as errors Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h. Signed-off-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 5849cdf upstream. Commit in Fixes: added support for kexec-ing a kernel on panic using a new system call. As part of it, it does prepare a memory map for the new kernel. However, while doing so, it wrongly accesses memory it has not allocated: it accesses the first element of the cmem->ranges[] array in memmap_exclude_ranges() but it has not allocated the memory for it in crash_setup_memmap_entries(). As KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0 Write of size 8 at addr ffffc90000426008 by task kexec/1187 (gdb) list *crash_setup_memmap_entries+0x17e 0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322). 317 unsigned long long mend) 318 { 319 unsigned long start, end; 320 321 cmem->ranges[0].start = mstart; 322 cmem->ranges[0].end = mend; 323 cmem->nr_ranges = 1; 324 325 /* Exclude elf header region */ 326 start = image->arch.elf_load_addr; (gdb) Make sure the ranges array becomes a single element allocated. [ bp: Write a proper commit message. ] Fixes: dd5f726 ("kexec: support for kexec on panic using new system call") Signed-off-by: Mike Galbraith <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Dave Young <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2ad5692 upstream. Commit 8a12f88 ("net: hso: fix null-ptr-deref during tty device unregistration") fixed the racy minor allocation reported by syzbot, but introduced an unconditional NULL-pointer dereference on every disconnect instead. Specifically, the serial device table must no longer be accessed after the minor has been released by hso_serial_tty_unregister(). Fixes: 8a12f88 ("net: hso: fix null-ptr-deref during tty device unregistration") Cc: [email protected] Cc: Anirudh Rayabharam <[email protected]> Reported-by: Leonardo Antoniazzi <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Anirudh Rayabharam <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a8b3b51 upstream. suspend() does its poisoning conditionally, resume() does it unconditionally. On a device with combined interfaces this will balance, on a device with two interfaces the counter will go negative and resubmission will fail. Both actions need to be done conditionally. Fixes: 6069e3e ("USB: cdc-acm: untangle a circular dependency between callback and softint") Signed-off-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Tested-by: Jon Hunter <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Guenter Roeck <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Tested-by: Jason Self <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Hulk Robot <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
This is the 5.4.115 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jul 20, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 Freescale#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 Freescale#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Freescale#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 Freescale#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jul 20, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 Freescale#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 Freescale#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Freescale#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 Freescale#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
imx_v8_defconfig) and arm32 (imx_v7_defconfig).-- andrey