Update 5.4-2.1.x-imx to v5.4.93 #233
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit bc1c204 upstream. In order to not to start returning errors when new I2C_M flags are added, change behavior to just ignore all flags that we don't know about. This includes the I2C_M_DMA_SAFE flag that already exists but causes -EINVAL to be returned for valid transactions. Cc: [email protected] # v4.19+ Signed-off-by: Mikko Perttunen <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
… INT3515 ACPI nodes commit 9bba962 upstream. There are several reports about the tps6598x causing interrupt flood on boards with the INT3515 ACPI node, which then causes instability. There appears to be several problems with the interrupt. One problem is that the I2CSerialBus resources do not always map to the Interrupt resource with the same index, but that is not the only problem. We have not been able to come up with a solution for all the issues, and because of that disabling the device for now. The PD controller on these platforms is autonomous, and the purpose for the driver is primarily to supply status to the userspace, so this will not affect any functionality. Reported-by: Moody Salem <[email protected]> Fixes: a3dd034 ("ACPI / scan: Create platform device for INT3515 ACPI nodes") Cc: [email protected] BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883511 Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f419e59 upstream. Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not use EC to switch touchpad. Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked unexpectedly. Writing VPCCMD_W_TOUCHPAD may cause a spurious key press. Add has_touchpad_switch to workaround these machines. Signed-off-by: Jiaxun Yang <[email protected]> Cc: [email protected] # 5.4+ -- v2: Specify touchpad to ELAN0634 v3: Stupid missing ! in v2 v4: Correct acpi_dev_present usage (Hans) Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 217bfbb upstream. snd_seq_oss_synth_make_info() didn't check the error code from snd_seq_oss_midi_make_info(), and this leads to the call of strlcpy() with the uninitialized string as the source, which may lead to the access over the limit. Add the proper error check for avoiding the failure. Reported-by: [email protected] Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 67ea698 upstream. It turned out that VIA codecs also mute the sound in the lowest mixer level. Turn on the dac_min_mute flag to indicate the mute-as-minimum in TLV like already done in Conexant and IDT codecs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210559 Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 78a18fe upstream. Set the acpi_device pointer which acpi_bus_get_device() returns-by- reference to NULL on errors. We've recently had 2 cases where callers of acpi_bus_get_device() did not properly error check the return value, so set the returned- by-reference acpi_device pointer to NULL, because at least some callers of acpi_bus_get_device() expect that to be done on errors. [ rjw: This issue was exposed by commit 71da201 ("ACPI: scan: Defer enumeration of devices with _DEP lists") which caused it to be much more likely to occur on some systems, but the real defect had been introduced by an earlier commit. ] Fixes: 40e7fcb ("ACPI: Add _DEP support to fix battery issue on Asus T100TA") Fixes: bcfcd40 ("usb: split code locating ACPI companion into port and device") Reported-by: Pierre-Louis Bossart <[email protected]> Tested-by: Pierre-Louis Bossart <[email protected]> Diagnosed-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Cc: All applicable <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 18d3bff upstream. This was partially fixed by f3e3d9c ("btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree"), however it missed a spot when we restart a trans handle because we need to end the transaction. The fix is the same, simply use btrfs_join_transaction() instead of btrfs_start_transaction() when deleting reloc roots. Fixes: f3e3d9c ("btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree") CC: [email protected] # 5.4+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit fb28610 upstream. While testing the error paths of relocation I hit the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc6+ Freescale#217 Not tainted ------------------------------------------------------ mount/779 is trying to acquire lock: ffffa0e676945418 (&fs_info->balance_mutex){+.+.}-{3:3}, at: btrfs_recover_balance+0x2f0/0x340 but task is already holding lock: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> Freescale#2 (btrfs-root-00){++++}-{3:3}: down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x27/0x100 btrfs_read_lock_root_node+0x31/0x40 btrfs_search_slot+0x462/0x8f0 btrfs_update_root+0x55/0x2b0 btrfs_drop_snapshot+0x398/0x750 clean_dirty_subvols+0xdf/0x120 btrfs_recover_relocation+0x534/0x5a0 btrfs_start_pre_rw_mount+0xcb/0x170 open_ctree+0x151f/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> Freescale#1 (sb_internal#2){.+.+}-{0:0}: start_transaction+0x444/0x700 insert_balance_item.isra.0+0x37/0x320 btrfs_balance+0x354/0xf40 btrfs_ioctl_balance+0x2cf/0x380 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->balance_mutex){+.+.}-{3:3}: __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 __mutex_lock+0x7e/0x7b0 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &fs_info->balance_mutex --> sb_internal#2 --> btrfs-root-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-root-00); lock(sb_internal#2); lock(btrfs-root-00); lock(&fs_info->balance_mutex); *** DEADLOCK *** 2 locks held by mount/779: #0: ffffa0e60dc040e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380 Freescale#1: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 stack backtrace: CPU: 0 PID: 779 Comm: mount Not tainted 5.10.0-rc6+ Freescale#217 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 ? trace_call_bpf+0x139/0x260 __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 ? btrfs_recover_balance+0x2f0/0x340 __mutex_lock+0x7e/0x7b0 ? btrfs_recover_balance+0x2f0/0x340 ? btrfs_recover_balance+0x2f0/0x340 ? rcu_read_lock_sched_held+0x3f/0x80 ? kmem_cache_alloc_trace+0x2c4/0x2f0 ? btrfs_get_64+0x5e/0x100 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea ? rcu_read_lock_sched_held+0x3f/0x80 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? __kmalloc_track_caller+0x2f2/0x320 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 ? capable+0x3a/0x60 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is straightforward to fix, simply release the path before we setup the balance_ctl. CC: [email protected] # 4.4+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 34d1eb0 upstream. If we fail to update a block group item in the loop we'll break, however we'll do btrfs_run_delayed_refs and lose our error value in ret, and thus not clean up properly. Fix this by only running the delayed refs if there was no failure. CC: [email protected] # 4.4+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…file and root commit 518837e upstream. When an incremental send finds an extent that is shared, it checks which file extent items in the range refer to that extent, and for those it emits clone operations, while for others it emits regular write operations to avoid corruption at the destination (as described and fixed by commit d906d49 ("Btrfs: send, fix file corruption due to incorrect cloning operations")). However when the root we are cloning from is the send root, we are cloning from the inode currently being processed and the source file range has several extent items that partially point to the desired extent, with an offset smaller than the offset in the file extent item for the range we want to clone into, it can cause the algorithm to issue a clone operation that starts at the current eof of the file being processed in the receiver side, in which case the receiver will fail, with EINVAL, when attempting to execute the clone operation. Example reproducer: $ cat test-send-clone.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT # Create our test file with a single and large extent (1M) and with # different content for different file ranges that will be reflinked # later. xfs_io -f \ -c "pwrite -S 0xab 0 128K" \ -c "pwrite -S 0xcd 128K 128K" \ -c "pwrite -S 0xef 256K 256K" \ -c "pwrite -S 0x1a 512K 512K" \ $MNT/foobar btrfs subvolume snapshot -r $MNT $MNT/snap1 btrfs send -f /tmp/snap1.send $MNT/snap1 # Now do a series of changes to our file such that we end up with # different parts of the extent reflinked into different file offsets # and we overwrite a large part of the extent too, so no file extent # items refer to that part that was overwritten. This used to confuse # the algorithm used by the kernel to figure out which file ranges to # clone, making it attempt to clone from a source range starting at # the current eof of the file, resulting in the receiver to fail since # it is an invalid clone operation. # xfs_io -c "reflink $MNT/foobar 64K 1M 960K" \ -c "reflink $MNT/foobar 0K 512K 256K" \ -c "reflink $MNT/foobar 512K 128K 256K" \ -c "pwrite -S 0x73 384K 640K" \ $MNT/foobar btrfs subvolume snapshot -r $MNT $MNT/snap2 btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2 echo -e "\nFile digest in the original filesystem:" md5sum $MNT/snap2/foobar # Now unmount the filesystem, create a new one, mount it and try to # apply both send streams to recreate both snapshots. umount $DEV mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT btrfs receive -f /tmp/snap1.send $MNT btrfs receive -f /tmp/snap2.send $MNT # Must match what we got in the original filesystem of course. echo -e "\nFile digest in the new filesystem:" md5sum $MNT/snap2/foobar umount $MNT When running the reproducer, the incremental send operation fails due to an invalid clone operation: $ ./test-send-clone.sh wrote 131072/131072 bytes at offset 0 128 KiB, 32 ops; 0.0015 sec (80.906 MiB/sec and 20711.9741 ops/sec) wrote 131072/131072 bytes at offset 131072 128 KiB, 32 ops; 0.0013 sec (90.514 MiB/sec and 23171.6148 ops/sec) wrote 262144/262144 bytes at offset 262144 256 KiB, 64 ops; 0.0025 sec (98.270 MiB/sec and 25157.2327 ops/sec) wrote 524288/524288 bytes at offset 524288 512 KiB, 128 ops; 0.0052 sec (95.730 MiB/sec and 24506.9883 ops/sec) Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 linked 983040/983040 bytes at offset 1048576 960 KiB, 1 ops; 0.0006 sec (1.419 GiB/sec and 1550.3876 ops/sec) linked 262144/262144 bytes at offset 524288 256 KiB, 1 ops; 0.0020 sec (120.192 MiB/sec and 480.7692 ops/sec) linked 262144/262144 bytes at offset 131072 256 KiB, 1 ops; 0.0018 sec (133.833 MiB/sec and 535.3319 ops/sec) wrote 655360/655360 bytes at offset 393216 640 KiB, 160 ops; 0.0093 sec (66.781 MiB/sec and 17095.8436 ops/sec) Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 File digest in the original filesystem: 9c13c61cb0b9f5abf45344375cb04dfa /mnt/sdi/snap2/foobar At subvol snap1 At snapshot snap2 ERROR: failed to clone extents to foobar: Invalid argument File digest in the new filesystem: 132f0396da8f48d2e667196bff882cfc /mnt/sdi/snap2/foobar The clone operation is invalid because its source range starts at the current eof of the file in the receiver, causing the receiver to get an EINVAL error from the clone operation when attempting it. For the example above, what happens is the following: 1) When processing the extent at file offset 1M, the algorithm checks that the extent is shared and can be (fully or partially) found at file offset 0. At this point the file has a size (and eof) of 1M at the receiver; 2) It finds that our extent item at file offset 1M has a data offset of 64K and, since the file extent item at file offset 0 has a data offset of 0, it issues a clone operation, from the same file and root, that has a source range offset of 64K, destination offset of 1M and a length of 64K, since the extent item at file offset 0 refers only to the first 128K of the shared extent. After this clone operation, the file size (and eof) at the receiver is increased from 1M to 1088K (1M + 64K); 3) Now there's still 896K (960K - 64K) of data left to clone or write, so it checks for the next file extent item, which starts at file offset 128K. This file extent item has a data offset of 0 and a length of 256K, so a clone operation with a source range offset of 256K, a destination offset of 1088K (1M + 64K) and length of 128K is issued. After this operation the file size (and eof) at the receiver increases from 1088K to 1216K (1088K + 128K); 4) Now there's still 768K (896K - 128K) of data left to clone or write, so it checks for the next file extent item, located at file offset 384K. This file extent item points to a different extent, not the one we want to clone, with a length of 640K. So we issue a write operation into the file range 1216K (1088K + 128K, end of the last clone operation), with a length of 640K and with a data matching the one we can find for that range in send root. After this operation, the file size (and eof) at the receiver increases from 1216K to 1856K (1216K + 640K); 5) Now there's still 128K (768K - 640K) of data left to clone or write, so we look into the file extent item, which is for file offset 1M and it points to the extent we want to clone, with a data offset of 64K and a length of 960K. However this matches the file offset we started with, the start of the range to clone into. So we can't for sure find any file extent item from here onwards with the rest of the data we want to clone, yet we proceed and since the file extent item points to the shared extent, with a data offset of 64K, we issue a clone operation with a source range starting at file offset 1856K, which matches the file extent item's offset, 1M, plus the amount of data cloned and written so far, which is 64K (step 2) + 128K (step 3) + 640K (step 4). This clone operation is invalid since the source range offset matches the current eof of the file in the receiver. We should have stopped looking for extents to clone at this point and instead fallback to write, which would simply the contain the data in the file range from 1856K to 1856K + 128K. So fix this by stopping the loop that looks for file ranges to clone at clone_range() when we reach the current eof of the file being processed, if we are cloning from the same file and using the send root as the clone root. This ensures any data not yet cloned will be sent to the receiver through a write operation. A test case for fstests will follow soon. Reported-by: Massimo B. <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 11f2069 ("Btrfs: send, allow clone operations within the same file") CC: [email protected] # 5.5+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b503087 upstream. If extended CSD was not available, the eMMC driver would incorrectly set the block size to 0, as the data_sector_size field of ext_csd was never initialized. This issue was exposed by commit 817046e ("block: Align max_hw_sectors to logical blocksize") which caused max_sectors and max_hw_sectors to be set to 0 after setting the block size to 0, resulting in a kernel panic in bio_split when attempting to read from the device. Fix it by only reading the block size from ext_csd if it is available. Fixes: a5075eb ("mmc: block: Allow disabling 512B sector size emulation") Signed-off-by: Peter Collingbourne <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Link: https://linux-review.googlesource.com/id/If244d178da4d86b52034459438fec295b02d6e60 Acked-by: Adrian Hunter <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1a3ed0d upstream. Automatic Clock Gating is a feature used for the power consumption optimisation. It turned out that during early init phase it may prevent the stable voltage switch to 1.8V - due to that on some platforms an endless printout in dmesg can be observed: "mmc1: 1.8V regulator output did not became stable" Fix the problem by disabling the ACG at very beginning of the sdhci_init and let that be enabled later. Fixes: 3a3748d ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") Signed-off-by: Alex Leibovich <[email protected]> Signed-off-by: Marcin Wojtas <[email protected]> Cc: [email protected] Acked-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 809b1e4 upstream. This reverts commit 644bda6 ("dm table: fall back to getting device using name_to_dev_t()") dm_get_dev_t() is just used to convert an arbitrary 'path' string into a dev_t. It doesn't presume that the device is present; that check will be done later, as the only caller is dm_get_device(), which does a dm_get_table_device() later on, which will properly open the device. So if the path string already _is_ in major:minor representation we can convert it directly, avoiding a recursion into the filesystem to lookup the block device. This avoids a hang in multipath_message() when the filesystem is inaccessible. Fixes: 644bda6 ("dm table: fall back to getting device using name_to_dev_t()") Cc: [email protected] Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin Wilck <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2d06dfe upstream. Recalculate can only be specified with internal_hash. Cc: [email protected] # v4.19+ Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 43b6730 upstream. Put the state before returning error code. Fixes: 44596b8 ("drm/atomic: Unify conflicting encoder handling.") Signed-off-by: Pan Bian <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a37eef6 upstream. While reviewing Christian's annotation patch I noticed that we have a user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj reference before we've completed the waiting. Of course usually there's nothing bad happening here since userspace keeps the reference, but we can't rely on userspace to play nice here! Signed-off-by: Daniel Vetter <[email protected]> Fixes: bc9c80f ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4") Reviewed-by: Christian König <[email protected]> Cc: Christian König <[email protected]> Cc: Lionel Landwerlin <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.2+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 488751a upstream. On error we unpin and free the wa_ctx.vma, but do not clear any of the derived flags. During lrc_init, we look at the flags and attempt to dereference the wa_ctx.vma if they are set. To protect the error path where we try to limp along without the wa_ctx, make sure we clear those flags! Reported-by: Matt Roper <[email protected]> Fixes: 604a8f6 ("drm/i915/lrc: Only enable per-context and per-bb buffers if set") Signed-off-by: Chris Wilson <[email protected]> Cc: Matt Roper <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: <[email protected]> # v4.15+ Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry-picked from 5b4dc95) Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit bb224c3 ] haswell machine board is missing pm_ops what prevents it from undergoing suspend-resume procedure successfully. Assign default snd_soc_pm_ops so this is no longer the case. Signed-off-by: Cezary Rojewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
… device [ Upstream commit c3d6eb6 ] Pointstick and its left/right buttons on HP EliteBook 850 G7 need multi-input quirk to work correctly. Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f7b347a ] The integrity target relies on skcipher for encryption/decryption, but certain kernel configurations may not enable CRYPTO_SKCIPHER, leading to compilation errors due to unresolved symbols. Explicitly select CRYPTO_SKCIPHER for DM_INTEGRITY, since it is unconditionally dependent on it. Signed-off-by: Anthony Iliopoulos <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 35fc4cd ] Users can initiate resets to specific SCSI device/target/host through IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host _reset_handler() callbacks is initialized with a request whose tag is -1. In this case it is not right for eh_device_reset_handler() callback to count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI device associated with the SCSI cmd. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Avri Altman <[email protected]> Reviewed-by: Stanley Chu <[email protected]> Signed-off-by: Can Guo <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d50c798 ] The CHAP secret displayed garbage characters causing iSCSI login authentication failure. Correct the CHAP password max length. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Lee Duncan <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e5cc900 ] The block layer code will split a large zeroout request into multiple bios and if WRITE SAME is disabled because the storage device reports that it does not support it (or support the length used), we can get an error message from the block layer despite the setting of RQF_QUIET on the first request. This is because more than one request may have already been submitted. Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the request early, we don't need to log a message because we did not actually submit the command to the device, and the block layer code will handle the error by submitting individual write bios. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 11f4c2e ] If of_clk_init() is not called in time_init(), clock providers defined in the system device tree are not initialized, resulting in failures for other devices to initialize due to missing clocks. Similarly to other architectures and to the default kernel time_init() implementation, call of_clk_init() before executing timer_probe() in time_init(). Signed-off-by: Damien Le Moal <[email protected]> Acked-by: Stephen Boyd <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1f1496a ] Setup the port uartclk in sifive_serial_probe() so that the base baud rate is correctly printed during device probe instead of always showing "0". I.e. the probe message is changed from 38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1, base_baud = 0) is a SiFive UART v0 to the correct: 38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1, base_baud = 115200) is a SiFive UART v0 Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Acked-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e400071 ] Tested. The device gets correctly exported to userspace and I can see mouse and keyboard events. Signed-off-by: Filipe Laíns <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7c38e76 ] Battery status is being reported for the Elan touchscreen on ASUS UX550 laptops despite not having a batter. It always shows either 0 or 1%. Signed-off-by: Seth Miller <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f4eccc7 ] Current implementation defaults the hda clocks to clk_m. This causes hda to run too slow to operate correctly. Fix this by defaulting to pll_p and setting the frequency to the correct rate. This matches upstream t124 and downstream t30. Acked-by: Jon Hunter <[email protected]> Tested-by: Ion Agorria <[email protected]> Acked-by: Sameer Pujar <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Peter Geis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c35a824 ] With UBSAN enabled and building with clang, there are occasionally warnings like WARNING: modpost: vmlinux.o(.text+0xc533ec): Section mismatch in reference from the function arch_atomic64_or() to the variable .init.data:numa_nodes_parsed The function arch_atomic64_or() references the variable __initdata numa_nodes_parsed. This is often because arch_atomic64_or lacks a __initdata annotation or the annotation of numa_nodes_parsed is wrong. for functions that end up not being inlined as intended but operating on __initdata variables. Mark these as __always_inline, along with the corresponding asm-generic wrappers. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3499ba8 ] For a while, event channel notification via the PCI platform device has been broken, because we attempt to communicate with xenstore before we even have notifications working, with the xs_reset_watches() call in xs_init(). We tend to get away with this on Xen versions below 4.0 because we avoid calling xs_reset_watches() anyway, because xenstore might not cope with reading a non-existent key. And newer Xen *does* have the vector callback support, so we rarely fall back to INTX/GSI delivery. To fix it, clean up a bit of the mess of xs_init() and xenbus_probe() startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM case, deferring it to be called from xenbus_probe() in the XS_HVM case instead. Then fix up the invocation of xenbus_probe() to happen either from its device_initcall if the callback is available early enough, or when the callback is finally set up. This means that the hack of calling xenbus_probe() from a workqueue after the first interrupt, or directly from the PCI platform device setup, is no longer needed. Signed-off-by: David Woodhouse <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 643a4df upstream. The system that use Synopsys USB host controllers goes to suspend when using USB audio player. This causes the USB host controller continuous send interrupt signal to system, When the number of interrupts exceeds 100000, the system will forcibly close the interrupts and output a calltrace error. When the system goes to suspend, the last interrupt is reported to the driver. At this time, the system has set the state to suspend. This causes the last interrupt to not be processed by the system and not clear the interrupt flag. This uncleared interrupt flag constantly triggers new interrupt event. This causing the driver to receive more than 100,000 interrupts, which causes the system to forcibly close the interrupt report and report the calltrace error. so, when the driver goes to sleep and changes the system state to suspend, the interrupt flag needs to be cleared. Signed-off-by: Longfang Liu <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4e0dcf6 upstream. The vhub engine has two dma mode, one is descriptor list, another is single stage DMA. Each mode has different stop register setting. Descriptor list operation (bit2) : 0 disable reset, 1: enable reset Single mode operation (bit0) : 0 : disable, 1: enable Fixes: 7ecca2a ("usb/gadget: Add driver for Aspeed SoC virtual hub") Cc: stable <[email protected]> Acked-by: Felipe Balbi <[email protected]> Acked-by: Joel Stanley <[email protected]> Signed-off-by: Ryan Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c28095b upstream. Use lock to guard against concurrent access for soft-connect/disconnect operations when writing to soft_connect sysfs. Fixes: 2ccea03 ("usb: gadget: introduce UDC Class") Cc: [email protected] Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/338ea01fbd69b1985ef58f0f59af02c805ddf189.1610611437.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ef02684 upstream. The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper <[email protected]> Cc: <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 576667b upstream. Once the command ring doorbell is rung the xHC controller will parse all command TRBs on the command ring that have the cycle bit set properly. If the driver just started writing the next command TRB to the ring when hardware finished the previous TRB, then HW might fetch an incomplete TRB as long as its cycle bit set correctly. A command TRB is 16 bytes (128 bits) long. Driver writes the command TRB in four 32 bit chunks, with the chunk containing the cycle bit last. This does however not guarantee that chunks actually get written in that order. This was detected in stress testing when canceling URBs with several connected USB devices. Two consecutive "Set TR Dequeue pointer" commands got queued right after each other, and the second one was only partially written when the controller parsed it, causing the dequeue pointer to be set to bogus values. This was seen as error messages: "Mismatch between completed Set TR Deq Ptr command & xHCI internal state" Solution is to add a write memory barrier before writing the cycle bit. Cc: <[email protected]> Tested-by: Ross Zwisler <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit da7e0c3 upstream. Occasionally, we are seeing some SuperSpeed devices resumes right after being directed to U3. This commits add 500us delay to ensure LFPS detector is disabled before sending ACK to firmware. [ 16.099363] tegra-xusb 70090000.usb: entering ELPG [ 16.104343] tegra-xusb 70090000.usb: 2-1 isn't suspended: 0x0c001203 [ 16.114576] tegra-xusb 70090000.usb: not all ports suspended: -16 [ 16.120789] tegra-xusb 70090000.usb: entering ELPG failed The register write passes through a few flop stages of 32KHz clock domain. NVIDIA ASIC designer reviewed RTL and suggests 500us delay. Cc: [email protected] Signed-off-by: JC Kuo <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3d1cf43 upstream. If the device passed as the target (second argument) to device_is_dependent() is not completely registered (that is, it has been initialized, but not added yet), but the parent pointer of it is set, it may be missing from the list of the parent's children and device_for_each_child() called by device_is_dependent() cannot be relied on to catch that dependency. For this reason, modify device_is_dependent() to check the ancestors of the target device by following its parent pointer in addition to the device_for_each_child() walk. Fixes: 9ed9895 ("driver core: Functional dependencies tracking support") Reported-by: Stephan Gerhold <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Reviewed-by: Saravana Kannan <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9a85c09 upstream. - JZ4760 and JZ4760B have a similar register layout as the JZ4740, and don't use the new register layout, which was introduced with the JZ4770 SoC and not the JZ4760 or JZ4760B SoCs. - The JZ4740 code path only expected two function modes to be configurable for each pin, and wouldn't work with more than two. Fix it for the JZ4760, which has four configurable function modes. Fixes: 0257595 ("pinctrl: Ingenic: Add pinctrl driver for JZ4760 and JZ4760B.") Cc: <[email protected]> # 5.3 Signed-off-by: Paul Cercueil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 76e2fc6 upstream. Set the maximum DIE per package variable on AMD using the NodesPerProcessor topology value. This will be used by RAPL, among others, to determine the maximum number of DIEs on the system in order to do per-DIE manipulations. [ bp: Productize into a proper patch. ] Fixes: 028c221 ("x86/CPU/AMD: Save AMD NodeId as cpu_die_id") Reported-by: Johnathan Smithinovic <[email protected]> Reported-by: Rafael Kitover <[email protected]> Signed-off-by: Yazen Ghannam <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Johnathan Smithinovic <[email protected]> Tested-by: Rafael Kitover <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=210939 Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2e5a626 upstream. RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt() treats Not-ECT or ECT(1) packets in a different way than those with ECT(0) or CE. Reproducer: Create two netns, connected with a veth: $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11/32 dev veth10 Add a route to ns1 in ns0: $ ip -netns ns0 route add 192.0.2.11/32 dev veth01 In ns1, only packets with TOS 4 can be routed to ns0: $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS is 4: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 0% packet loss ... Now use iptable's rpfilter module in ns1: $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP Not-ECT and ECT(1) packets still pass: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... But ECT(0) and ECN packets are dropped: $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 100% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 100% packet loss ... After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore. Fixes: 8f97339 ("netfilter: add ipv4 reverse path filter match") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f477a53 upstream. When G2_DMA is enabled and SH_DMA is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for SH_DMA_API Depends on [n]: SH_DMA [=n] Selected by [y]: - G2_DMA [=y] && SH_DREAMCAST [=y] The reason is that G2_DMA selects SH_DMA_API without depending on or selecting SH_DMA while SH_DMA_API depends on SH_DMA. When G2_DMA was first introduced with commit 40f49e7 ("sh: dma: Make G2 DMA configurable."), this wasn't an issue since SH_DMA_API didn't have such dependency, and this way was the only way to enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was made visible and dependent on SH_DMA with commit d8902ad ("dmaengine: sh: Add Support SuperH DMA Engine driver"). Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues. Fixes: d8902ad ("dmaengine: sh: Add Support SuperH DMA Engine driver") Signed-off-by: Necip Fazil Yildiran <[email protected]> Signed-off-by: Rich Felker <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 87fe043 upstream. mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 9230706 (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Tobias Waldekranz <[email protected]> Tested-by: Tobias Waldekranz <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f6a2e94 upstream. sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9778448 upstream. The allocated page is not released if error occurs in nvm_submit_io_sync_raw(). __free_page() is moved ealier to avoid possible memory leak issue. Fixes: aff3fb1 ("lightnvm: move bad block and chunk state logic to core") Signed-off-by: Pan Bian <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 66c5560 upstream. Commit 3226b15 ("net: avoid 32 x truesize under-estimation for tiny skbs") ensured that skbs with data size lower than 1025 bytes will be kmalloc'ed to avoid excessive page cache fragmentation and memory consumption. However, the fix adressed only __napi_alloc_skb() (primarily for virtio_net and napi_get_frags()), but the issue can still be achieved through __netdev_alloc_skb(), which is still used by several drivers. Drivers often allocate a tiny skb for headers and place the rest of the frame to frags (so-called copybreak). Mirror the condition to __netdev_alloc_skb() to handle this case too. Since v1 [0]: - fix "Fixes:" tag; - refine commit message (mention copybreak usecase). [0] https://lore.kernel.org/netdev/[email protected] Fixes: a1c7fff ("net: netdev_alloc_skb() use build_skb()") Signed-off-by: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a11a496 upstream. During testing kasan_populate_early_shadow and kasan_remove_zero_shadow, if the shadow start and end address in kasan_remove_zero_shadow() is not aligned to PMD_SIZE, the remain unaligned PTE won't be removed. In the test case for kasan_remove_zero_shadow(): shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000 3-level page table: PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K 0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE. In the correct condition, this should fallback to the next level kasan_remove_pmd_table() but the condition flow always continue to skip the unaligned part. Fix by correcting the condition when next and addr are neither aligned. Link: https://lkml.kernel.org/r/[email protected] Fixes: 0207df4 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN") Signed-off-by: Lecopzer Chen <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: YJ Chiang <[email protected]> Cc: Andrey Konovalov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 5dabd17 upstream. kasan_remove_zero_shadow() shall use original virtual address, start and size, instead of shadow address. Link: https://lkml.kernel.org/r/[email protected] Fixes: 0207df4 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN") Signed-off-by: Lecopzer Chen <[email protected]> Reviewed-by: Andrey Konovalov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Alexander Potapenko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8d2b51b upstream. udp_v4_early_demux() is the only function that calls ip_mc_validate_source() with a TOS that hasn't been masked with IPTOS_RT_MASK. This results in different behaviours for incoming multicast UDPv4 packets, depending on if ip_mc_validate_source() is called from the early-demux path (udp_v4_early_demux) or from the regular input path (ip_route_input_noref). ECN would normally not be used with UDP multicast packets, so the practical consequences should be limited on that side. However, IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align with the non-early-demux path behaviour. Reproducer: Setup two netns, connected with veth: $ ip netns add ns0 $ ip netns add ns1 $ ip -netns ns0 link set dev lo up $ ip -netns ns1 link set dev lo up $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10 In ns0, add route to multicast address 224.0.2.0/24 using source address 198.51.100.10: $ ip -netns ns0 address add 198.51.100.10/32 dev lo $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10 In ns1, define route to 198.51.100.10, only for packets with TOS 4: $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10 Also activate rp_filter in ns1, so that incoming packets not matching the above route get dropped: $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1 Now try to receive packets on 224.0.2.11: $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof - In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is, tos 6 for socat): $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test0" message is properly received by socat in ns1, because early-demux has no cached dst to use, so source address validation is done by ip_route_input_mc(), which receives a TOS that has the ECN bits masked. Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0): $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test1" message isn't received by socat in ns1, because, now, early-demux has a cached dst to use and calls ip_mc_validate_source() immediately, without masking the ECN bits. Fixes: bc044e8 ("udp: perform source validation for mcast early demux") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a826b04 upstream. The ff00::/8 multicast route is created without specifying the fc_protocol field, so the default RTPROT_BOOT value is used: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium As the documentation says, this value identifies routes installed during boot, but the route is created when interface is set up. Change the value to RTPROT_KERNEL which is a better value. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit bcd0cf1 upstream. tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT attribute is not silly. UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29 shift exponent 255 is too large for 32-bit type 'int' CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 valid_perfect_hash net/sched/cls_tcindex.c:260 [inline] tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425 tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546 tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127 rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2336 ___sys_sendmsg+0xf3/0x170 net/socket.c:2390 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2423 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e4bedf4 upstream. iproute2 probably never goes beyond 8 for the cell exponent, but stick to the max shift exponent for signed 32bit. UBSAN reported: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22 shift exponent 130 is too large for 32-bit type 'int' CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x183/0x22e lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395 __detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389 qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435 cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180 qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246 tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662 rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2345 ___sys_sendmsg net/socket.c:2399 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2432 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Cong Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ceed903 upstream. The multicast route ff00::/8 is created with type RTN_UNICAST: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium Set the type to RTN_MULTICAST which is more appropriate. Fixes: e8478e8 ("net/ipv6: Save route type in rt6_info") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 79267ae upstream. The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e5 ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a3eb4e9 upstream. With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be logically done when RXCSUM offload is off. Fixes: 1413656 ("net: Add TLS RX offload feature") Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Boris Pismenny <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8e4052c upstream. The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b160c28 upstream. Heiner Kallweit reported that some skbs were sent with the following invalid GSO properties : - gso_size > 0 - gso_type == 0 This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2. Juerg Haefliger was able to reproduce a similar issue using a lan78xx NIC and a workload mixing TCP incoming traffic and forwarded packets. The problem is that tcp_add_backlog() is writing over gso_segs and gso_size even if the incoming packet will not be coalesced to the backlog tail packet. While skb_try_coalesce() would bail out if tail packet is cloned, this overwriting would lead to corruptions of other packets cooked by lan78xx, sharing a common super-packet. The strategy used by lan78xx is to use a big skb, and split it into all received packets using skb_clone() to avoid copies. The drawback of this strategy is that all the small skb share a common struct skb_shared_info. This patch rewrites TCP gso_size/gso_segs handling to only happen on the tail skb, since skb_try_coalesce() made sure it was not cloned. Fixes: 4f693b5 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <[email protected]> Bisected-by: Juerg Haefliger <[email protected]> Tested-by: Juerg Haefliger <[email protected]> Reported-by: Heiner Kallweit <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9d9b1ee upstream. The TCP session does not terminate with TCP_USER_TIMEOUT when data remain untransmitted due to zero window. The number of unanswered zero-window probes (tcp_probes_out) is reset to zero with incoming acks irrespective of the window size, as described in tcp_probe_timer(): RFC 1122 4.2.2.17 requires the sender to stay open indefinitely as long as the receiver continues to respond probes. We support this by default and reset icsk_probes_out with incoming ACKs. This counter, however, is the wrong one to be used in calculating the duration that the window remains closed and data remain untransmitted. Thanks to Jonathan Maxwell <[email protected]> for diagnosing the actual issue. In this patch a new timestamp is introduced for the socket in order to track the elapsed time for the zero-window probes that have not been answered with any non-zero window ack. Fixes: 9721e70 ("tcp: simplify window probe aborting on USER_TIMEOUT") Reported-by: William McCall <[email protected]> Co-developed-by: Neal Cardwell <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Enke Chen <[email protected]> Reviewed-by: Yuchung Cheng <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Tested-by: Jon Hunter <[email protected]> Tested-by: Guenter Roeck <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
This is the 5.4.93 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
imx_v8_defconfig) and arm32 (imx_v7_defconfig).-- andrey