Revert Portable/Renesas formatting

portable/Renesas/RX100/portmacro.h

@@ -50,103 +50,103 @@
  */
 
 /* Type definitions - these are a bit legacy and not really used now, other
- * than portSTACK_TYPE and portBASE_TYPE. */
-#define portCHAR          char
-#define portFLOAT         float
-#define portDOUBLE        double
-#define portLONG          long
-#define portSHORT         short
-#define portSTACK_TYPE    uint32_t
-#define portBASE_TYPE     long
-
-typedef portSTACK_TYPE   StackType_t;
-typedef long             BaseType_t;
-typedef unsigned long    UBaseType_t;
-
-#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
-    typedef uint16_t     TickType_t;
-    #define portMAX_DELAY              ( TickType_t ) 0xffff
+than portSTACK_TYPE and portBASE_TYPE. */
+#define portCHAR        char
+#define portFLOAT       float
+#define portDOUBLE      double
+#define portLONG        long
+#define portSHORT       short
+#define portSTACK_TYPE  uint32_t
+#define portBASE_TYPE   long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
+    typedef uint16_t TickType_t;
+    #define portMAX_DELAY ( TickType_t ) 0xffff
 #elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
-    typedef uint32_t     TickType_t;
-    #define portMAX_DELAY              ( TickType_t ) 0xffffffffUL
+    typedef uint32_t TickType_t;
+    #define portMAX_DELAY ( TickType_t ) 0xffffffffUL
 
-/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
- * not need to be guarded with a critical section. */
-    #define portTICK_TYPE_IS_ATOMIC    1
+    /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+    not need to be guarded with a critical section. */
+    #define portTICK_TYPE_IS_ATOMIC 1
 #else
     #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
 #endif
 /*-----------------------------------------------------------*/
 
 /* Hardware specifics. */
-#define portBYTE_ALIGNMENT    8             /* Could make four, according to manual. */
-#define portSTACK_GROWTH      -1
-#define portTICK_PERIOD_MS    ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
-#define portNOP()    nop()
+#define portBYTE_ALIGNMENT              8   /* Could make four, according to manual. */
+#define portSTACK_GROWTH                -1
+#define portTICK_PERIOD_MS              ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portNOP()                       nop()
 
 #pragma inline_asm vPortYield
 static void vPortYield( void )
 {
     /* Save clobbered register - may not actually be necessary if inline asm
-     * functions are considered to use the same rules as function calls by the
-     * compiler. */
+    functions are considered to use the same rules as function calls by the
+    compiler. */
     PUSH.L R5
     /* Set ITU SWINTR. */
-    MOV.L # 872E0H, R5
-        MOV.B # 1, [ R5 ]
+    MOV.L #872E0H, R5
+    MOV.B #1, [R5]
     /* Read back to ensure the value is taken before proceeding. */
-    MOV.L[ R5 ], R5
+    MOV.L [R5], R5
     /* Restore clobbered register to its previous value. */
     POP R5
 }
-#define portYIELD()                                       vPortYield()
-#define portYIELD_FROM_ISR( x )                           do { if( x != pdFALSE ) { portYIELD(); } } while( 0 )
+#define portYIELD() vPortYield()
+#define portYIELD_FROM_ISR( x ) do { if( x != pdFALSE ) { portYIELD(); } } while( 0 )
 
 /* These macros should not be called directly, but through the
- * taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros.  An extra check is
- * performed if configASSERT() is defined to ensure an assertion handler does not
- * inadvertently attempt to lower the IPL when the call to assert was triggered
- * because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
- * when an ISR safe FreeRTOS API function was executed.  ISR safe FreeRTOS API
- * functions are those that end in FromISR.  FreeRTOS maintains a separate
- * interrupt API to ensure API function and interrupt entry is as fast and as
- * simple as possible. */
-#define portENABLE_INTERRUPTS()                           set_ipl( ( long ) 0 )
+taskENTER_CRITICAL() and taskEXIT_CRITICAL() macros.  An extra check is
+performed if configASSERT() is defined to ensure an assertion handler does not
+inadvertently attempt to lower the IPL when the call to assert was triggered
+because the IPL value was found to be above configMAX_SYSCALL_INTERRUPT_PRIORITY
+when an ISR safe FreeRTOS API function was executed.  ISR safe FreeRTOS API
+functions are those that end in FromISR.  FreeRTOS maintains a separate
+interrupt API to ensure API function and interrupt entry is as fast and as
+simple as possible. */
+#define portENABLE_INTERRUPTS()     set_ipl( ( long ) 0 )
 #ifdef configASSERT
-    #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID()    configASSERT( ( get_ipl() <= configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
-    #define portDISABLE_INTERRUPTS()                      if( get_ipl() < configMAX_SYSCALL_INTERRUPT_PRIORITY ) set_ipl( ( long ) configMAX_SYSCALL_INTERRUPT_PRIORITY )
+    #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() configASSERT( ( get_ipl() <= configMAX_SYSCALL_INTERRUPT_PRIORITY ) )
+    #define portDISABLE_INTERRUPTS()    if( get_ipl() < configMAX_SYSCALL_INTERRUPT_PRIORITY ) set_ipl( ( long ) configMAX_SYSCALL_INTERRUPT_PRIORITY )
 #else
-    #define portDISABLE_INTERRUPTS()                      set_ipl( ( long ) configMAX_SYSCALL_INTERRUPT_PRIORITY )
+    #define portDISABLE_INTERRUPTS()    set_ipl( ( long ) configMAX_SYSCALL_INTERRUPT_PRIORITY )
 #endif
 
 /* Critical nesting counts are stored in the TCB. */
-#define portCRITICAL_NESTING_IN_TCB    ( 1 )
+#define portCRITICAL_NESTING_IN_TCB ( 1 )
 
 /* The critical nesting functions defined within tasks.c. */
 extern void vTaskEnterCritical( void );
 extern void vTaskExitCritical( void );
-#define portENTER_CRITICAL()                                           vTaskEnterCritical()
-#define portEXIT_CRITICAL()                                            vTaskExitCritical()
+#define portENTER_CRITICAL()    vTaskEnterCritical()
+#define portEXIT_CRITICAL()     vTaskExitCritical()
 
 /* As this port allows interrupt nesting... */
-#define portSET_INTERRUPT_MASK_FROM_ISR()                              ( UBaseType_t ) get_ipl(); set_ipl( ( signed long ) configMAX_SYSCALL_INTERRUPT_PRIORITY )
-#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus )    set_ipl( ( signed long ) uxSavedInterruptStatus )
+#define portSET_INTERRUPT_MASK_FROM_ISR() ( UBaseType_t ) get_ipl(); set_ipl( ( signed long ) configMAX_SYSCALL_INTERRUPT_PRIORITY )
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus ) set_ipl( ( signed long ) uxSavedInterruptStatus )
 
 /*-----------------------------------------------------------*/
 
 /* Tickless idle/low power functionality. */
 #if configUSE_TICKLESS_IDLE == 1
     #ifndef portSUPPRESS_TICKS_AND_SLEEP
         extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
-        #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime )    vPortSuppressTicksAndSleep( xExpectedIdleTime )
+        #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
     #endif
 #endif
 
 /*-----------------------------------------------------------*/
 
 /* Task function macros as described on the FreeRTOS.org WEB site. */
-#define portTASK_FUNCTION_PROTO( vFunction, pvParameters )    void vFunction( void * pvParameters )
-#define portTASK_FUNCTION( vFunction, pvParameters )          void vFunction( void * pvParameters )
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
 
 /* *INDENT-OFF* */
 #ifdef __cplusplus