This repository contains firmware images for the Silead touchscreen controllers in various tablet (and other) devices.
There is also a number of conversion tools here that help with extraction and preparation of firmware images.
The firmware files were extracted from Android and Windows device drivers, as published by device manufacturers. They are intended for people who prefer to replace the shipped operating system with a generic Linux distribution such as Debian or Ubuntu.
The files may be covered by proprietary licenses or copyright. Please consult the manufacturer's website or device documentation for more information.
In contrast, everything in the tools directory is published under the GNU General Public license v2, as laid out in tools/LICENSE.
See below for instructions on how to submit firmware for a new device.
| Manufacturer | Device | Tested | Firmware |
|---|---|---|---|
| Chuwi | hi8 | yes | firmware/chuwi/hi8 |
| Chuwi | vi8 | no | firmware/chuwi/vi8 |
| Chuwi | vi10 | yes | firmware/chuwi/vi10 |
| Chuwi | Hi10 Pro | yes | firmware/chuwi/hi10_pro |
| Chuwi | Hi10 Pro new (z8350, 20161209) | yes | firmware/chuwi/hi10_pro-z8350 |
| Chuwi | Hi10 Plus | yes | firmware/chuwi/hi10_plus |
| Chuwi | HiBook | yes | firmware/chuwi/hibook |
| EastRising | ER-TPC050-1 | yes | firmware/eastrising/er-tpc050-1 |
| Trekstor | SurfTab wintron 7.0 | yes | firmware/trekstor/surftab7old |
| Trekstor | SurfTab wintron 7.0 (ST70416-6) | yes | firmware/trekstor/surftab7new |
| Trekstor | SurfTab twin 10.1 (ST10432-8) | yes | firmware/trekstor/surftab-twin-10.1-ST10432-8 |
| Utok | i800 | yes | firmware/utok/i800 |
| RCA | Cambio W101 V2 10.1" tablet | yes | firmware/rca/w101v2 |
| Onda | V820w 16G | yes | firmware/onda/v820w_16g |
| Onda | V891w | no | firmware/onda/v891w |
| EduGear | XR2N1 | yes | firmware/edugear/xr2n1 |
| Cube | i10 | yes | firmware/cube/i10 |
| jumper | EZpad mini3 | yes | firmware/jumper/EZpad_mini3 |
| 4Good | T803i | no | firmware/4good/t803i |
To request new firmware to be added to the list, please send a pull request with the following structure:
firmware/<manufacturer>/<device>/<unpacked driver>/The original Windows or Android drivers or firmware files (SileadTouch.sys, SileadTouch.fw, gslx68x_ts.ko, ...)firmware/<manufacturer>/<device>/README.mdA readme containing all (known) device information plus download links to the original Windows/Android driver or firmware. See firmware/README.md.template for an example with explanations.firmware/<manufacturer>/<device>/silead.fw(optional) The extracted firmware in legacy format, as created by fw_extractor, untscfg or unscramble (see below)firmware/<manufacturer>/<device>/silead_ts.fw(optional) Firmware created by fwtool (see below) using correct parameters.README.mdA patch to this readme file that adds an entry to the device list.
The "Tested" field should only be "Yes" if you have confirmed that the converted firmware works with silead_ts.ko or gslx680_ts_acpi.ko and the touchscreen responds properly, i.e. the device parameters are good.
Original vendor firmware comes in various formats, depending on the operating system and driver version.
The Android driver can be found under this path (or similar): /system/vendor/modules/gslx680.ko Copy this to a SD card or use a GNU/Linux chroot to scp it over, or use adb pull. On your build machine, on the command line, use the script 'firmware/fw_extractor' to extract the firmware to its own file.
tools/fw_extractor my_android_gslx680.ko
The Android driver may well contain multiple firmwares to support different hardware configurations with the same driver. The extractor will spit those out as seperate files. We currently have no way of knowing which is right for your device. You will have to try each. Sometimes, the file names will give a clue, like panel size, product name, resolution or chip name. Test the matching ones first.
If you have a Windows driver instead, the firmware either comes in the form of a file named GSL_TS_CFG.h (or similar) or SileadTouch.fw. The latter is just a scrambled version of GSL_TS_CFG.h and can be easily restored by XORing every byte with 0x88.
To convert GSL_TS_CFG.h into a binary firmware, use:
tools/untscfg GSL_TS_CFG.h firmware.fw
And for a scrambled SileadTouch.fw:
tools/unscramble SileadTouch.fw firmware.fw
If your vendor only supplied a Windows driver and no separate firmware, you can still extract the firmware blob that is contained inside. This requires some manual work in a hex editor, however.
Search for the hex sequence F0 00 00 00, followed by a 32 bit number of the form xx 00 00 00 (i.e. an 8 bit value in a little endian 32 bit word) and lots of yy 00 00 00 zz zz zz zz word pairs (where yy is counting from 00 to 7C and zz is any hex code). There are normally several blocks of data with the same pattern that follow. Copy all of them into a new file and call it firmware.fw. This should be the firmware image for your device.
See here for an example with some help from grep and dd.
The gslx680-acpi driver requires firmware in a special, more compact format.
Use firmware/fwtool to convert regular firmware into this format. The tool will also set some non-generic device parameters, such as panel width and height, tracking support, etc.
The file format is described in 'firmware/Firmware/Silead.pm'. Use perldoc or a text editor to read.
Example usage:
tools/fwtool -c firmware.fw -m 1680 -w 940 -h 750 -t 10 silead_ts.fw
This will read legacy firmware.fw, convert it into silead_ts.fw in the new format, then set the controller type to GSL1680, the panel width to 940 dots, the height to 750 dots and the maximum number of touch points to 10. The README for each firmware should give you information on the information to put there.
It is also possible to convert the scrambled SileadTouch.fw from a Windows driver directly:
tools/fwtool -c SileadTouch.fw -3 -m 1680 -w 940 -h 750 -t 10 silead_ts.fw
And for an unscrambled GSL_TS_CFG.h, use:
tools/fwtool -c TS_CFG.h -2 -m 1680 -w 940 -h 750 -t 10 silead_ts.fw
You might still need to calibrate the touchscreen later, if the numbers are unknown or not accurate. Note that the maximum width and height are 4095. The driver is currently hardcoded to a touch point limit of 10 fingers, so specifying more than that will not work.
If your touchscreen controller does not support finger tracking (this is crucial for proper mouse emulation) or axes seem to be mirrored or swapped, you can modify the firmware to enable corresponding features in the driver.
For example, this enables software finger tracking and mirrors the horizontal axis:
tools/fwtool -s -f track,xflip silead_ts.fw
The -f option may also be specified directly when converting a firmware image.
The resulting firmware should be named silead_ts.fw and installed into /lib/firmware so the driver can find it.
To convert a firmware image back into legacy format, use:
tools/fwtool -x gslxxxx.fw silead_ts.fw
Note that memory page order is not preserved. This should not pose a problem for the controller, however.