unlshd-049

New changes

• Warning! After installing, Desktop settings (Favoutite apps, PIN Code, AutoLock time..) will be resetted to default due to OFW changes, Please set your PIN code, Favourite apps again in Settings->Desktop
• New way of changing device name -> Now can be changed in Settings->Desktop (by @xMasterX and @Willy-JL)
• Plugins: BadBT plugin (BT version of BadKB) (by Willy-JL, ClaraCrazy, XFW contributors)
• Plugins: WiFi Marauder -> Added sniff pmkid on selected aps from 0.10.4 update (by @clipboard1)
• Plugins: SubGHz Bruteforcer -> Increase delay just a little bit to fix some cases when receiver will not get codes and decrease manual transmit delay
• Plugins: UART Terminal -> Fix crashes on plugin load with RX connected
• NFC: Mifare mini with SAK 0x89 support
• SubGHz: CAME Atomo - Add manually support and custom buttons support
• SubGHz: Fix crashes when deleting signals using right arrow button in Read mode
• SubGHz: Restore Rx indication after deletion after Memory is FULL (by @wosk | PR #464)
• SubGHz: App refactoring (OFW code ported + our code was refactored/cleaned up too) (by @gid9798 and @xMasterX | PR #461)
• SubGHz: Using scene manager functions in DecodeRAW (by @gid9798 | PR #462)
• SubGHz: Protocols and custom buttons refactoring (by @gid9798 | PR #465)
• SubGHz: Move counter increase setting out of debug, change max value
• GUI: Submenu locked elements (by @Willy-JL and @giacomoferretti)
• GUI: Text Input improvements, added cursor and ability to set minimal length (by @Willy-JL)
• BT API: Functions that allow to change bt mac address and device broadcasted name (by @Willy-JL and XFW contributors)
• Infrared: External output move out of debug and add power option for external modules
• Infrared: Updated universal remote assets (by @amec0e | PR #474)
• Extra pack: Some app fixes
• FBT: Fix vscode example config for debug builds - please run ./fbt vscode_dist again if you had issues with debug builds size
• OFW PR 2316: NFC V support (by @g3gg0 & @nvx)
• OFW PR 2669: nfc: Fix MFUL tearing flags read (by @GMMan)
• OFW PR 2666: BadUSB: Add fr-FR-mac key layout (by @FelixLgr)
• OFW: api: added lib/nfc/protocols/nfc_util.h
• OFW: fix PIN retry count reset on reboot
• OFW: fbt: allow strings for fap_version field in app manifests
• OFW: Rpc: add desktop service. Desktop: refactor locking routine. Now PIN lock is actually cannot be bypassed by reboot! / Desktop settings will be reset, please set your PIN and favourite apps again!
• OFW: Part 2 of hooking C2 IPC
• OFW: ble: attempt to handle hardfaulted c2
• OFW: Add Mfkey32 application
• OFW: Added DigitalSequence and PulseReader
• OFW: Debug: revert cortex debug to lxml and drop DWT (reapply your VSCode launch.json from example folder)
• OFW: furi_crash: added C2 status; added fw-version gdb command
• OFW: Removed STM32CubeWB module
• OFW: API version in UI
• OFW: ufbt: deploying sample ufbt automation for new apps; added source "ufbt -s env" for toolchain access
• OFW: Fix storage.py exist_dir logic

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-049(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-049.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-048

New changes

• If you have copied any apps manually into apps folder - remove apps folder or that specific apps you copied on your microSD before installing this release to avoid issues!
• Plugins: RFID and iButton Fuzzer remove excessive free()'s (thanks @Willy-JL)
• Plugins: Use COUNT_OF in mouse jiggler
• Plugins: Added Numpad keyboard to HID app (by @clipboard1 | PR #452)
• About: Don't show 00 on about screens
• SubGHz: Combine FuriString allocs and other small changes
• Infrared: Updated universal remote assets (by @amec0e | PR #454)
• Update slideshow: Replace QR code with good old link
• OFW: Various Furi/FuriHal bug fixes and improvements -> Breaking API change, api was changed from 24.x to 26.x
• OFW: Loader refactoring, part 1 -> Breaking API change, api was changed from 23.x to 24.x (this will make your manually copied plugins not work, update them in same way you installed them, or delete apps folder and then install firmware, if you using extra pack builds (with e in version) all apps in _Extra will be updated automatically)
• OFW: Dolphin builder in ufbt; minor ufbt/fbt improvements
• OFW: Added API version to device info
• OFW: Gui: relax some asserts in view
• OFW: Move gauge calibration to separate header, add f18 calibration
• OFW: Fix TERMINFO on Linux systems

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-048(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-048.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-047

New changes

This updates includes latest DeepSleep(New Power-Saving Mode) (starting from 046 release)

Also make sure to set your settings to this, and do full power off, wait 10sec and power on again

Settings -> System -> Debug = OFF
Settings -> System -> Log level = None
Settings -> System -> Heap trace = None
Settings -> System -> Sleep Method = Default

when debug is on, new sleep mode will not work
debug will make flipper waiting for debug session via swd and it will never go to sleep when debug is on 

• NFC: Temp fix for Detect reader not collecting nonces
• Desktop: Temp fix for old backlight bug when locking by holding up arrow
• IR: Add Sharp and Vizio to Universal TV remote
• BLE Info: Show version instead of branch
• Plugins: Add new game - Bomberduck (by @leo-need-more-coffee | PR #450)
• Plugins: Fix SWD Probe plugin GPIO pins state reset on exit
• Plugins: Bluetooth Remote - new UI (by @krolchonok | PR #447)
• Plugins: Update TOTP (Authenticator) (by akopachov)
• Docs: Update HowToInstall (by @krolchonok | PR #443)
• OFW PR 2627: Add HID mouse auto-clicker (by @rwl4)

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-047(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-047.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-046

New changes

• This updates includes latest DeepSleep(New Power-Saving Mode) changes from OFW,
  Also make sure to set your settings to this, and do full power off, wait 10sec and power on again

Settings -> System -> Debug = OFF
Settings -> System -> Log level = None
Settings -> System -> Heap trace = None
Settings -> System -> Sleep Method = Default

when debug is on, new sleep mode will not work
debug will make flipper waiting for debug session via swd and it will never go to sleep when debug is on 

• Power + BLE: DeepSleep + required ble stack upgrade added back, all known issues was fixed in OFW, no issues was found during our tests
• Desktop: Allow locking without pin using Up menu on desktop (Short click on Lock = Without PIN / Long = With PIN)
• RFID: Add confirmation message before running Clear T5577 Password
• RFID: Add more user friendly RAW emulation via UI (by Dan Caprita)
• SubGHz: Fixed Frequency Analyzer issues, fixed Read mode issues
• SubGHz: Fix NFC crash when using external CC1101 radio module
• SubGHz: Fix multiple external CC1101 radio module issues, (int callbacks, SPI handlers init/reinit)
• SubGHz: Using scene manager function in add manually (by @gid9798 | PR #437)
• Plugins: ESP32: WiFi Marauder - add icon for log files in logs browser
• Plugins: Update ESP32: WiFi Marauder companion plugin (by 0xchocolate) merged PR by @tcpassos
• Plugins: Update TOTP (Authenticator) (by akopachov)
• Plugins: Fix RFID Fuzzer and iButton Fuzzer crashes
• Plugins: iButton Fuzzer default keys update (by @team-orangeBlue)
• Infrared: Updated infrared assets (by @amec0e | PR #441)
• Docs: Update How To Install images (by @krolchonok | PR #436)
• OFW PR 2620: NFC: Fix reading Mifare Classic cards with unusual access conditions and fix emulation of unknown keys (by Astrrra)
• OFW PR 2616: Picopass: remove spaces in CSN (by bettse)
• OFW PR 2604: WS: add protocol "Wendox W6726" (by Skorpionm)
• OFW PR 2607: BadUSB: command parser fix (by nminaylov)
• OFW: Keep HSI16 working in stop mode.
• OFW: FuriHal: use proper divider for core2 when transition to sleep, remove extra stop mode transition checks, cleanup code. Furi: proper assert and check messages.
• OFW: Don't reboot on crash in debug builds
• OFW: cubewb: downgraded to v1.15.0

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-046(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-046.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-045

New changes

• Power + BLE Stack: Reverted OFW BLE stack upgrade, reverted deep sleep -> Temporarily, due to NFC issues, need more research on how deepsleep affects all systems -> If you got any NFC (or orther) crashes / freezes on 044 release please upgrade to this one
• SubGHz: Combining add manual scenes (by @gid9798 | PR #433)
• SubGHz: Fix add manually naming

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-045(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-045.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-044

New changes

• Note: Due to latest official changes this release was delayed - release was tested by group of users, and some of them reported getting one crash on "furi_check failed", but this can not be reproduced in any way we tried, so, please if you found any issues with BLE (+ Mobile app) that results in crash, create issue with all details how you got it and how many times, and detailed steps on repeating such issue, if you got one crash and can't get it again, collect information how it happened and create issue with as much details as possible -> Thanks!
• SubGHz: New option to use timestamps + protocol name when you saving file, instead of random name - Enable in Radio Settings -> Time in names = ON
• SubGHz: Read mode UI improvements (scrolling text, + shows time when signal was received) (by @wosk | PR #429)
• SubGHz: New options to ignore Magellan, Cars(ScherKhan, Kia)(no you can't send that signals)
• SubGHz: Fix keeloq custom buttons bugs
• SubGhz: Nero Radio 57bit experimental support + encoder improvements and decoder changes
• SubGhz: Fix RAW recording and reading, (bug where raw file plays endlessly) (Fixes issue #431)
• SubGHz Remote: Add Alutech AT4N Support, fix some issues
• Power GUI: Changing battery style doesnt require reboot (Added API to trigger UI change from different place) (Inspired by @ESurge work)
• Plugins: BLE Remote -> Keynote with vertical layout (by @Kami-no | PR #428)
• Plugins: Improve wifi marauder keyboard (added extra symbols!) (Port uart terminal keyboard into wifi marauder)
• Infrared: Update universal remote assets (by @amec0e | PR #421)
• Docs: Update build docs (by @PhoenixSheppy | PR #425)
• OFW: cubewb: updated to v1.16.0 -> Part 2 of "Various stop mode fixes"
• OFW: github: testing SDK with ufbt action
• OFW: Raw RFID documentation
• OFW: Introduce stealth mode and auto-selective lock
• OFW: Active RPC session icon -> Breaking API change, api was changed from 22.x to 23.x
• OFW: Various stop mode fixes -> Should fix known issues with BLE (Random freezes, menu freeze, BT Remote plugin freeze) and other similar issues
• OFW: Picopass: Correctly aborts when correct key is found -> Fixes Bug (Picopass app not reading elite keyed cards anymore. #413)

Pre-release changes

• If you have copied apps into apps folder - remove apps folder on your microSD before installing this release to avoid issues!
• SubGHz: (Bug that I decided to keep as a feature) You can change default button (Ok) for remote by holding custom button and pressing back at same time (same can be used to restore your button if you changed it accidentally) - Be careful, it might be unstable, I will make proper option to change button in next releases
• SubGHz: Fixes for custom button bugs in SubGHz Remote app
• SubGHz: Add alutech table to enviroment alloc and free
• Docs: Fix and update docs - thanks to @lesterrry
• Plugins: Bluetooth Remote - implemented YouTube Shorts Remote (may be unstable)
• Plugins: Bluetooth Remote - improvements and fixes for TikTok remote (by @krolchonok | PR #420 and #432)
• Plugins: Implement an array for baudrates on GPS UART app (+ add 19200 baud) (by @p0ns | PR #416)
• Plugins: Remove UART Echo from releases since it is locked on 115200 baud, and we have UART Terminal with ability to set baudrate
• Plugins: Update TOTP (Authenticator) (by akopachov)
• Plugins: Update UART Terminal (by cool4uma)
• OFW: Deep Sleep Idle - Improves battery usage!!! -> Breaking API change, api was changed from 21.x to 22.x
• OFW: FuriHal: pwr pulls for some pins
• OFW: Bugfix: ISP Programmer and SubGhz
• OFW: AVR_ISP: fix NULL pointer dereference
• OFW: Fix gpio state isp programmer
• OFW: ufbt: project & debugging updates
• OFW: FuriHal: fix gpio naming and add explicit pulls for vibro, speaker and ir_tx -> Breaking API change, api was changed from 20.x to 21.x
  (this will make your manually copied plugins not work, update them in same way you installed them, or delete apps folder and then install firmware, if you using extra pack builds (with e in version) all apps in _Extra will be updated automatically)

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-044(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-044.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-042

New changes

• SubGHz: Keyboard lock fixed

Previous changes

• SubGHz: AN-Motors AT4 - Add manually fixes
• SubGHz: StarLine ignore option (in Read -> Config) (by @gid9798 | PR #410)
• Plugins: Fix Repeat: 200 bug in SubGHz Remote and Bruteforcer
• Plugins: Update TOTP (Authenticator) (by akopachov) (Steam guard support)
• Plugins: Update UART Terminal (by cool4uma) (AT commands support)
• Plugins: Add IR Scope app. (by @kallanreed | PR #407)
• OFW: scripts: sconsdist: added stub file artifact for older ufbt
• OFW: Graphics cleanup and icon rotation
• OFW: Moved ufbt to fbt codebase
• OFW: SD Driver: do not cache sd status.
• OFW: Furi: more gpio checks in HAL
• OFW: WeatherStation: fix protocol TX141TH-BV2

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-042(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-042.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-041

New changes

• SubGHz: AN-Motors AT4 - Add manually fixes
• SubGHz: StarLine ignore option (in Read -> Config) (by @gid9798 | PR #410)
• Plugins: Fix Repeat: 200 bug in SubGHz Remote and Bruteforcer
• Plugins: Update TOTP (Authenticator) (by akopachov) (Steam guard support)
• Plugins: Update UART Terminal (by cool4uma) (AT commands support)
• Plugins: Add IR Scope app. (by @kallanreed | PR #407)
• OFW: scripts: sconsdist: added stub file artifact for older ufbt
• OFW: Graphics cleanup and icon rotation
• OFW: Moved ufbt to fbt codebase
• OFW: SD Driver: do not cache sd status.
• OFW: Furi: more gpio checks in HAL
• OFW: WeatherStation: fix protocol TX141TH-BV2

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-041(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-041.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-040

New changes

• SubGHz: Support for Allmatic(reads as Beninca), also fix Beninca protocol
• SubGHz: Allmatic -> Add Manually
• Plugins: Show External CC1101 module status in Weather Station and in POCSAG Pager plugins
• Plugins: Update TOTP (Authenticator) (by akopachov) (Fixes BT issues)
• SubGHz: Fix false detections of StarLine 72bit, flipper can decode only 64bit
• SubGHz: ScherKhan, more informative messages instead of "Unknown", may be not correct, because we guessing type by bits
• SubGHz: Clear code in "Add Manually" scene (by @gid9798 | PR #403)
• SubGHz: Unification of custom buttons (by @gid9798 | PR #405)
• Infrared: Universal remote assets updated (by @amec0e | PR #404)
• Plugins: GPS NMEA (UART) modifications

- Ability to change baudrate using Up button, hold button to switch between baudrates (9600, 57600, 115200) (i set 57600 as default)
- Ok button will set backlight to always on mode, to disable press ok button again (it will restore default settings after app exit too)
- Long press Right button to change speed from knots to kilometers per hour
- Exit from app using long press on back button instead of short press, may be useful in case you want to turn backlight on and accidentally click back

• OFW PR 2536: Fixing parsing troika card number (by @achistyakov)
• OFW PR 2548: Picopass Add more detail to saved info screen (by @bettse)
• OFW PR 2544: added WAIT_FOR_BUTTON_PRESS functionality to badusb (by @p4p1)
• OFW PR 2475: AVR ISP Programmer FAP (by @Skorpionm) (+ AVR ISP enable 5v power on start fix) (beta test, report found issues in our repo)
• OFW: FatFS: use rtc for timestamping
• OFW: RPC: increase max message size
• OFW: Picopass: Elite progress
• OFW: Improved thread lifecycle
• OFW: View Model: recursive mutex

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-040(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-040.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-039

New changes

• SubGHz: AN-Motors AT4 + Alutech AT4N - Add Manually support
• SubGHz: Aprimatic keeloq emulation support + Add Manually
• NFC: MF Classic User Dict -> Fix deleting of the key in extra actions menu
• Plugins: Update WiFi Marauder (by 0xchocolate)
• Plugins: Fix POCSAG pager RIC: text repetition and overlap (by @Willy-JL | PR #398)
• OFW: NFC: MF Classic - Additional checks before invalidating the key (Fixes issues with not using MF keys from user dict)
• OFW: Fix crash when emulating a DSGeneric key

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-039(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-039.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater