Command line control of the Insteon Hub
This utility is used to send PLM commands to a networked Insteon Hub that will send the corresponding Insteon control commands over the dual-mesh network.
It makes use of GNU getopt which must be installed in a more-or-less standard location.
It also uses tinyxml2 (included) under the ZLib license, permitting open source or commercial use.
An example config file is provided in insteon_hub.config
Edit it to suit your needs and copy or move it to ~/.insteon_hub
As of version 0.10.0, device names can be specified in the .insteon_hub file in a section. See the example for details. Device types are as follows:
90 = relay 91 = dimmer 92 = scene/group (untested) 93 = thermostat (untested)