changed version to 0.5.6

- fixed typo
Chr157i4n · Dec 19, 2024 · badb658 · badb658
1 parent 5e57e2c
commit badb658
Show file tree

Hide file tree

Showing 3 changed files with 9 additions and 2 deletions.
diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -1,5 +1,12 @@
 # Changelog
 
+## version 0.5.6
+
+- fixed return status instead of hardcoded True in test_uart
+- refactored test_dir_step_en function
+- fixed links in readme
+- switched to python 3.13 in unittests
+
 ## version 0.5.5
 
 - changed Nvidia Jetson detection

diff --git a/README.md b/README.md
@@ -17,7 +17,7 @@ So if you move the motor with high speed using this library the motor will lose
 Tested on a [Bigtreetech TMC2209 V1.2](https://github.com/bigtreetech/BIGTREETECH-Stepper-Motor-Driver/tree/master/TMC2209/V1.2) and [Bigtreetech TMC2209 V1.3](https://github.com/bigtreetech/BIGTREETECH-Stepper-Motor-Driver/tree/master/TMC2209/V1.3).
 
 It has a rSense of 110 mOhm and it uses one Pin (PDN_UART) for UART RX and TX.
-So the PD_UART-Pin needs to be connected to the Raspberrry Pis RX-Pin directly and to the TX-Pin with an 1kOhm resistor.
+So the PDN_UART-Pin needs to be connected to the Raspberrry Pis RX-Pin directly and to the TX-Pin with an 1kOhm resistor.
 You can read more about this in the datasheet from Trinamic.
 
 Because the TMC2209 uses one shared pin for transmit and receive in the UART communication line, the Raspberry Pi also receives what it sends.

diff --git a/setup.cfg b/setup.cfg
@@ -1,6 +1,6 @@
 [metadata]
 name = TMC_2209_Raspberry_Pi
-version = 0.5.5
+version = 0.5.6
 author = Christian Köhlke
 author_email = [email protected]
 description = this is a Python libary to drive a stepper motor with a Trinamic TMC2209 stepper driver and a Raspberry Pi