mobilealerts for Home Assistant

integrates home assistant to the mobilealerts sensor reading service

Version history

see Version History

Installation

To install this integration you will need to add this as a custom repository in HACS. Open HACS page, then click integrations Click the three dots top right, select Custom repositories

1. URL enter https://github.com/cestlagalere/mobilealerts
2. Category select Integration
3. click Add

Once installed you will then be able to install this integration from the HACS integrations page.

Restart your Home Assistant to complete the installation.

Configuration

add elements to yaml sensor section:

sensor:
  - platform: mobile_alerts
    phone_id: 123456789012
    devices:
      - device_id: 012345678901
        name: Outside Temp
        type: t1
      - device_id: 012345678901
        name: Outside Humidity
        type: h

type:

see https://mobile-alerts.eu/info/public_server_api_documentation.pdf

type	description
t1	The measured temperature in celsius.
t2	The measured temperature in celsius of the external sensor / sensor 2.
t3	The measured temperature in celsius of temperature sensor 3.
t4	The measured temperature in celsius of temperature sensor 4.
h	The measured humidity.
h1	The measured humidity of humidity sensor 1.
h2	The measured humidity of humidity sensor 2.
h3	The measured humidity of humidity sensor 3.
h4	The measured humidity of humidity sensor 4.
r	The rain value in mm. 0.258 mm of rain are equal to one flip.
rf	The flip count of the rain sensor. A flip equals 0.258 mm of rain.
ws	The measured windspeed in m/s.
wg	The measured gust in m/s.
wd	The wind direction. 0: N, 1: NNE, 2: NE, 3: ENE, 4: E, 5: ESE, 6: SE, 7: SSE, 8: S, 9: SSW, 10: SW, 11: WSW, 12: W, 13: WNW, 14: NW, 15: NNW. Direction degrees = wd * 22.5
w	If the window is opened or closed.
h3havg	Average humidity of the last 3 hours.
h24havg	Average humidity of the last 24 hours.
h7davg	Average humidity of the last 7 days.
h30davg	Average humidity of the last 30 days.
kp1t	The key press type.
kp1c	The running counter of key presses.
kp2t	The key press type.
kp2c	The running counter of key presses.
kp3t	The key press type.
kp3c	The running counter of key presses.
kp4t	The key press type.
kp4c	The running counter of key presses.
sc	If the measurement occured because of a status
ap	The measured air pressure in hPa.
water	water presence sensor (t2 of MA10350)

development

based on the DataUpdateCoordinator and CoordinatorEntity classes

see https://developers.home-assistant.io/docs/integration_fetching_data/

raw data can be viewed using

curl -d "{'deviceids': 'XXXXXXXXXXXX'}" -H "Content-Type: application/json" https://www.data199.com/api/pv1/device/lastmeasurement