mm patches #1
Closed
mm patches #1
Commits on Sep 19, 2023
-
mm: Disable watermark boosting by default
What watermark boosting does is preemptively fire up kswapd to free memory when there hasn't been an allocation failure. It does this by increasing kswapd's high watermark goal and then firing up kswapd. The reason why this causes freezes is because, with the increased high watermark goal, kswapd will steal memory from processes that need it in order to make forward progress. These processes will, in turn, try to allocate memory again, which will cause kswapd to steal necessary pages from those processes again, in a positive feedback loop known as page thrashing. When page thrashing occurs, your system is essentially livelocked until the necessary forward progress can be made to stop processes from trying to continuously allocate memory and trigger kswapd to steal it back. This problem already occurs with kswapd *without* watermark boosting, but it's usually only encountered on machines with a small amount of memory and/or a slow CPU. Watermark boosting just makes the existing problem worse enough to notice on higher spec'd machines. Disable watermark boosting by default since it's a total dumpster fire. I can't imagine why anyone would want to explicitly enable it, but the option is there in case someone does. Signed-off-by: Sultan Alsawaf <[email protected]>
-
mm: Stop kswapd early when nothing's waiting for it to free pages
Keeping kswapd running when all the failed allocations that invoked it are satisfied incurs a high overhead due to unnecessary page eviction and writeback, as well as spurious VM pressure events to various registered shrinkers. When kswapd doesn't need to work to make an allocation succeed anymore, stop it prematurely to save resources. Signed-off-by: Sultan Alsawaf <[email protected]>
-
mm: Don't stop kswapd on a per-node basis when there are no waiters
The page allocator wakes all kswapds in an allocation context's allowed nodemask in the slow path, so it doesn't make sense to have the kswapd- waiter count per each NUMA node. Instead, it should be a global counter to stop all kswapds when there are no failed allocation requests. Signed-off-by: Sultan Alsawaf <[email protected]>
-
mm: Increment kswapd_waiters for throttled direct reclaimers
Throttled direct reclaimers will wake up kswapd and wait for kswapd to satisfy their page allocation request, even when the failed allocation lacks the __GFP_KSWAPD_RECLAIM flag in its gfp mask. As a result, kswapd may think that there are no waiters and thus exit prematurely, causing throttled direct reclaimers lacking __GFP_KSWAPD_RECLAIM to stall on waiting for kswapd to wake them up. Incrementing the kswapd_waiters counter when such direct reclaimers become throttled fixes the problem. Signed-off-by: Sultan Alsawaf <[email protected]>
-
mm: Disable proactive compaction by default
On-demand compaction works fine assuming that you don't have a need to spam the page allocator nonstop for large order page allocations. Signed-off-by: Sultan Alsawaf <[email protected]>
-
mm: Don't hog the CPU and zone lock in rmqueue_bulk()
There is noticeable scheduling latency and heavy zone lock contention stemming from rmqueue_bulk's single hold of the zone lock while doing its work, as seen with the preemptoff tracer. There's no actual need for rmqueue_bulk() to hold the zone lock the entire time; it only does so for supposed efficiency. As such, we can relax the zone lock and even reschedule when IRQs are enabled in order to keep the scheduling delays and zone lock contention at bay. Forward progress is still guaranteed, as the zone lock can only be relaxed after page removal. With this change, rmqueue_bulk() no longer appears as a serious offender in the preemptoff tracer, and system latency is noticeably improved. Signed-off-by: Sultan Alsawaf <[email protected]>
-
scatterlist: Don't allocate sg lists using __get_free_page
Allocating pages with __get_free_page is slower than going through the slab allocator to grab free pages out from a pool. These are the results from running the code at the bottom of this message: [ 1.278602] speedtest: __get_free_page: 9 us [ 1.278606] speedtest: kmalloc: 4 us [ 1.278609] speedtest: kmem_cache_alloc: 4 us [ 1.278611] speedtest: vmalloc: 13 us kmalloc and kmem_cache_alloc (which is what kmalloc uses for common sizes behind the scenes) are the fastest choices. Use kmalloc to speed up sg list allocation. This is the code used to produce the above measurements: static int speedtest(void *data) { static const struct sched_param sched_max_rt_prio = { .sched_priority = MAX_RT_PRIO - 1 }; volatile s64 ctotal = 0, gtotal = 0, ktotal = 0, vtotal = 0; struct kmem_cache *page_pool; int i, j, trials = 1000; volatile ktime_t start; void *ptr[100]; sched_setscheduler_nocheck(current, SCHED_FIFO, &sched_max_rt_prio); page_pool = kmem_cache_create("pages", PAGE_SIZE, PAGE_SIZE, SLAB_PANIC, NULL); for (i = 0; i < trials; i++) { start = ktime_get(); for (j = 0; j < ARRAY_SIZE(ptr); j++) while (!(ptr[j] = kmem_cache_alloc(page_pool, GFP_KERNEL))); ctotal += ktime_us_delta(ktime_get(), start); for (j = 0; j < ARRAY_SIZE(ptr); j++) kmem_cache_free(page_pool, ptr[j]); start = ktime_get(); for (j = 0; j < ARRAY_SIZE(ptr); j++) while (!(ptr[j] = (void *)__get_free_page(GFP_KERNEL))); gtotal += ktime_us_delta(ktime_get(), start); for (j = 0; j < ARRAY_SIZE(ptr); j++) free_page((unsigned long)ptr[j]); start = ktime_get(); for (j = 0; j < ARRAY_SIZE(ptr); j++) while (!(ptr[j] = __kmalloc(PAGE_SIZE, GFP_KERNEL))); ktotal += ktime_us_delta(ktime_get(), start); for (j = 0; j < ARRAY_SIZE(ptr); j++) kfree(ptr[j]); start = ktime_get(); *ptr = vmalloc(ARRAY_SIZE(ptr) * PAGE_SIZE); vtotal += ktime_us_delta(ktime_get(), start); vfree(*ptr); } kmem_cache_destroy(page_pool); printk("%s: __get_free_page: %lld us\n", __func__, gtotal / trials); printk("%s: __kmalloc: %lld us\n", __func__, ktotal / trials); printk("%s: kmem_cache_alloc: %lld us\n", __func__, ctotal / trials); printk("%s: vmalloc: %lld us\n", __func__, vtotal / trials); complete(data); return 0; } static int __init start_test(void) { DECLARE_COMPLETION_ONSTACK(done); BUG_ON(IS_ERR(kthread_run(speedtest, &done, "malloc_test"))); wait_for_completion(&done); return 0; } late_initcall(start_test); Signed-off-by: Sultan Alsawaf <[email protected]> -
mm: Omit RCU read lock in list_lru_count_one() when RCU isn't needed
The RCU read lock isn't necessary in list_lru_count_one() when the condition that requires RCU (CONFIG_MEMCG && !CONFIG_SLOB) isn't met. The highly-frequent RCU lock and unlock adds measurable overhead to the shrink_slab() path when it isn't needed. As such, we can simply omit the RCU read lock in this case to improve performance. Signed-off-by: Sultan Alsawaf <[email protected]> Signed-off-by: Kazuki Hashimoto <[email protected]>
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.