Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Update --debug to state if it's using stdin or the file system #2524

Closed
JohnC32 opened this issue Jun 1, 2023 · 0 comments
Closed

Update --debug to state if it's using stdin or the file system #2524

JohnC32 opened this issue Jun 1, 2023 · 0 comments
Labels
enhancement An enhancement to the functionality of the software. rollup A PR that has been merged with many others in a rollup.

Comments

@JohnC32
Copy link

JohnC32 commented Jun 1, 2023

Please update --debug switch to indicate if ripgrep is searching stdin or a file system directory (and print which one).

Rationale:

I used ripgrep from within a Makefile and in a terminal, it worked fine. However, when I used it from within Emacs via M-x compile RET make RET ripgrep returned no results. Reading the help, led me to add --debug, but it didn't say why ripgrep wasn't working as I expected.

After a bit of debugging I found that ripgrep reads stdin (emacs sets this up) which caused ripgrep to behave differently when running GNU make from within Emacs. I later saw in the doc that this is intended behavior, so no issue with that. Having --debug explain what is going on would have saved me a bit of debugging.

Thanks
@BurntSushi BurntSushi added enhancement An enhancement to the functionality of the software. rollup A PR that has been merged with many others in a rollup. labels Nov 22, 2023
BurntSushi added a commit that referenced this issue Nov 22, 2023
@BurntSushi
logging: show heuristic information and decision
576667c 
When one does not provide any paths to ripgrep to search, it has to
guess between searching stdin and the current working directory. It is
possible for this guess to be wrong, and having the heuristics and the
choice in the debug logs is useful for diagnosing this.

The failure mode here is still pretty bad because you need to know to
reach for the `--debug` flag in the first place. Namely, the typical
failure mode is that ripgrep tries to search stdin while the intent is
for it to search the current working directory, and thus likely blocking
forever waiting for data on stdin.

(Arguably this is a problem with the process architecture that invokes
ripgrep. It shouldn't give ripgrep an open stdin handle that isn't
closed.)

Closes #2524
@sankalp-khare sankalp-khare mentioned this issue Nov 26, 2023
Merged
netbsd-srcmastr pushed a commit to NetBSD/pkgsrc that referenced this issue Nov 28, 2023
@0323pin
textproc/ripgrep: update to 14.0.2
3d89a00 
14.0.2 (2023-11-27)
===================
This is a patch release with a few small bug fixes.

Bug fixes:

* [BUG #2654](BurntSushi/ripgrep#2654):
  Fix `deb` release sha256 sum file.
* [BUG #2658](BurntSushi/ripgrep#2658):
  Fix partial regression in the behavior of `--null-data --line-regexp`.
* [BUG #2659](BurntSushi/ripgrep#2659):
  Fix Fish shell completions.
* [BUG #2662](BurntSushi/ripgrep#2662):
  Fix typo in documentation for `-i/--ignore-case`.


14.0.1 (2023-11-26)
===================
This a patch release meant to fix `cargo install ripgrep` on Windows.

Bug fixes:

* [BUG #2653](BurntSushi/ripgrep#2653):
  Include `pkg/windows/Manifest.xml` in crate package.


14.0.0 (2023-11-26)
===================
ripgrep 14 is a new major version release of ripgrep that has some new
features, performance improvements and a lot of bug fixes.

The headlining feature in this release is hyperlink support. In this release,
they are an opt-in feature but may change to an opt-out feature in the future.
To enable them, try passing `--hyperlink-format default`. If you use [VS Code],
then try passing `--hyperlink-format vscode`. Please [report your experience
with hyperlinks][report-hyperlinks], positive or negative.

[VS Code]: https://code.visualstudio.com/
[report-hyperlinks]: BurntSushi/ripgrep#2611

Another headlining development in this release is that it contains a rewrite
of its regex engine. You generally shouldn't notice any changes, except for
some searches may get faster. You can read more about the [regex engine rewrite
on my blog][regex-internals]. Please [report your performance improvements or
regressions that you notice][report-perf].

[report-perf]: BurntSushi/ripgrep#2652

Finally, ripgrep switched the library it uses for argument parsing. Users
should not notice a difference in most cases (error messages have changed
somewhat), but flag overrides should generally be more consistent. For example,
things like `--no-ignore --ignore-vcs` work as one would expect (disables all
filtering related to ignore rules except for rules found in version control
systems such as `git`).

[regex-internals]: https://blog.burntsushi.net/regex-internals/

**BREAKING CHANGES**:

* `rg -C1 -A2` used to be equivalent to `rg -A2`, but now it is equivalent to
  `rg -B1 -A2`. That is, `-A` and `-B` no longer completely override `-C`.
  Instead, they only partially override `-C`.

Build process changes:

* ripgrep's shell completions and man page are now created by running ripgrep
with a new `--generate` flag. For example, `rg --generate man` will write a
man page in `roff` format on stdout. The release archives have not changed.
* The optional build dependency on `asciidoc` or `asciidoctor` has been
dropped. Previously, it was used to produce ripgrep's man page. ripgrep now
owns this process itself by writing `roff` directly.

Performance improvements:

* [PERF #1746](BurntSushi/ripgrep#1746):
  Make some cases with inner literals faster.
* [PERF #1760](BurntSushi/ripgrep#1760):
  Make most searches with `\b` look-arounds (among others) much faster.
* [PERF #2591](BurntSushi/ripgrep#2591):
  Parallel directory traversal now uses work stealing for faster searches.
* [PERF #2642](BurntSushi/ripgrep#2642):
  Parallel directory traversal has some contention reduced.

Feature enhancements:

* Added or improved file type filtering for Ada, DITA, Elixir, Fuchsia, Gentoo,
  Gradle, GraphQL, Markdown, Prolog, Raku, TypeScript, USD, V
* [FEATURE #665](BurntSushi/ripgrep#665):
  Add a new `--hyperlink-format` flag that turns file paths into hyperlinks.
* [FEATURE #1709](BurntSushi/ripgrep#1709):
  Improve documentation of ripgrep's behavior when stdout is a tty.
* [FEATURE #1737](BurntSushi/ripgrep#1737):
  Provide binaries for Apple silicon.
* [FEATURE #1790](BurntSushi/ripgrep#1790):
  Add new `--stop-on-nonmatch` flag.
* [FEATURE #1814](BurntSushi/ripgrep#1814):
  Flags are now categorized in `-h/--help` output and ripgrep's man page.
* [FEATURE #1838](BurntSushi/ripgrep#1838):
  An error is shown when searching for NUL bytes with binary detection enabled.
* [FEATURE #2195](BurntSushi/ripgrep#2195):
  When `extra-verbose` mode is enabled in zsh, show extra file type info.
* [FEATURE #2298](BurntSushi/ripgrep#2298):
  Add instructions for installing ripgrep using `cargo binstall`.
* [FEATURE #2409](BurntSushi/ripgrep#2409):
  Added installation instructions for `winget`.
* [FEATURE #2425](BurntSushi/ripgrep#2425):
  Shell completions (and man page) can be created via `rg --generate`.
* [FEATURE #2524](BurntSushi/ripgrep#2524):
  The `--debug` flag now indicates whether stdin or `./` is being searched.
* [FEATURE #2643](BurntSushi/ripgrep#2643):
  Make `-d` a short flag for `--max-depth`.
* [FEATURE #2645](BurntSushi/ripgrep#2645):
  The `--version` output will now also contain PCRE2 availability information.

Bug fixes:

* [BUG #884](BurntSushi/ripgrep#884):
  Don't error when `-v/--invert-match` is used multiple times.
* [BUG #1275](BurntSushi/ripgrep#1275):
  Fix bug with `\b` assertion in the regex engine.
* [BUG #1376](BurntSushi/ripgrep#1376):
  Using `--no-ignore --ignore-vcs` now works as one would expect.
* [BUG #1622](BurntSushi/ripgrep#1622):
  Add note about error messages to `-z/--search-zip` documentation.
* [BUG #1648](BurntSushi/ripgrep#1648):
  Fix bug where sometimes short flags with values, e.g., `-M 900`, would fail.
* [BUG #1701](BurntSushi/ripgrep#1701):
  Fix bug where some flags could not be repeated.
* [BUG #1757](BurntSushi/ripgrep#1757):
  Fix bug when searching a sub-directory didn't have ignores applied correctly.
* [BUG #1891](BurntSushi/ripgrep#1891):
  Fix bug when using `-w` with a regex that can match the empty string.
* [BUG #1911](BurntSushi/ripgrep#1911):
  Disable mmap searching in all non-64-bit environments.
* [BUG #1966](BurntSushi/ripgrep#1966):
  Fix bug where ripgrep can panic when printing to stderr.
* [BUG #2046](BurntSushi/ripgrep#2046):
  Clarify that `--pre` can accept any kind of path in the documentation.
* [BUG #2108](BurntSushi/ripgrep#2108):
  Improve docs for `-r/--replace` syntax.
* [BUG #2198](BurntSushi/ripgrep#2198):
  Fix bug where `--no-ignore-dot` would not ignore `.rgignore`.
* [BUG #2201](BurntSushi/ripgrep#2201):
  Improve docs for `-r/--replace` flag.
* [BUG #2288](BurntSushi/ripgrep#2288):
  `-A` and `-B` now only each partially override `-C`.
* [BUG #2236](BurntSushi/ripgrep#2236):
  Fix gitignore parsing bug where a trailing `\/` resulted in an error.
* [BUG #2243](BurntSushi/ripgrep#2243):
  Fix `--sort` flag for values other than `path`.
* [BUG #2246](BurntSushi/ripgrep#2246):
  Add note in `--debug` logs when binary files are ignored.
* [BUG #2337](BurntSushi/ripgrep#2337):
  Improve docs to mention that `--stats` is always implied by `--json`.
* [BUG #2381](BurntSushi/ripgrep#2381):
  Make `-p/--pretty` override flags like `--no-line-number`.
* [BUG #2392](BurntSushi/ripgrep#2392):
  Improve global git config parsing of the `excludesFile` field.
* [BUG #2418](BurntSushi/ripgrep#2418):
  Clarify sorting semantics of `--sort=path`.
* [BUG #2458](BurntSushi/ripgrep#2458):
  Make `--trim` run before `-M/--max-columns` takes effect.
* [BUG #2479](BurntSushi/ripgrep#2479):
  Add documentation about `.ignore`/`.rgignore` files in parent directories.
* [BUG #2480](BurntSushi/ripgrep#2480):
  Fix bug when using inline regex flags with `-e/--regexp`.
* [BUG #2505](BurntSushi/ripgrep#2505):
  Improve docs for `--vimgrep` by mentioning footguns and some work-arounds.
* [BUG #2519](BurntSushi/ripgrep#2519):
  Fix incorrect default value in documentation for `--field-match-separator`.
* [BUG #2523](BurntSushi/ripgrep#2523):
  Make executable searching take `.com` into account on Windows.
* [BUG #2574](BurntSushi/ripgrep#2574):
  Fix bug in `-w/--word-regexp` that would result in incorrect match offsets.
* [BUG #2623](BurntSushi/ripgrep#2623):
  Fix a number of bugs with the `-w/--word-regexp` flag.
* [BUG #2636](BurntSushi/ripgrep#2636):
  Strip release binaries for macOS.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
enhancement An enhancement to the functionality of the software. rollup A PR that has been merged with many others in a rollup.
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@BurntSushi @JohnC32