Lua scripts for the RaceCapturePro
This script transmits data from the RaceCapture Pro to the AiM SmartyCam
https://wiki.autosportlabs.com/AIM_SmartyCam_CAN
--add your virtual channels here
tpsId = addChannel("TPS", 10, 0, 0, 100, "%")
tempId = addChannel("EngineTemp", 1, 0, 0, 120, 'C')
oilTempId = addChannel("OilTemp", 1, 0, 0, 170, 'C')
rpmId = addChannel("RPM", 10, 0, 0, 10000, 'RPM')
oilPresId = addChannel("OilPress", 10, 2, 0, 10, 'Bar')
fuellevelId = addChannel("FuelLevel", 1, 0, 0, 120, "L")
temp1Id = addChannel ("HeadTemp" , 1, 0, 0, 170, 'C')
temp2Id = addChannel ("EGT" , 10, 0, 0, 1000, 'C')
ch1Id = addChannel ("BrakePos", 10, 0, 0, 100, "%")
ch2Id = addChannel ("ClutchPos", 10, 0, 0, 100, "%")
ch3Id = addChannel ("Brake", 1, 0, 0, 150, "Bar")
ch4Id = addChannel ("Steering", 1, 0, -300, 300, "Deg")
ch5Id = addChannel ("Lambda", 10, 2, -1, 1, "C")
fuelPresId = addChannel ("FuelPress", 10, 2, 0, 10, "Bar")
gearId = addChannel ("Gear", 10, 0, 0, 7, "#")
--format is: [CAN Id] = function(data) map_chan(<channel id>, data, <CAN offset>, <CAN length>, <multiplier>, <adder>)
CAN_map = {
[1056] = function(data) map_chan(rpmId, data, 0, 2, 1, 0) map_chan(gearId, data, 4, 2, 1, 0) map_chan_le(tempId, data, 6, 2, 0.1, 0) end,
[1057] = function(data) map_chan(temp1Id, data, 0, 2, 0.1, 0) map_chan(temp2Id, data, 2, 2, 0.1, 0) map_chan(oilTempId, data, 4, 2, 0.1, 0) map_chan_le(oilPresId, data, 6, 2, 0.01, 0) end,
[1058] = function(data) map_chan(ch3Id, data, 0, 2, 0.01, 0) map_chan(tpsId, data, 2, 2, 1, 0) map_chan(ch1Id, data, 4, 2, 1, 0) map_chan(ch2Id, data, 6, 2, 1, 0) end
,
[1059] = function(data) map_chan(ch4Id, data, 0, 2, 1, 0) map_chan(ch5Id, data, 2, 2, 0.01, 0) end,
[1060] = function(data) map_chan(fuellevelId, data, 0, 2, 1, 0) map_chan(fuelPresId, data, 2, 2, 0.1, 0) end
}https://wiki.autosportlabs.com/CAN_Bus_database
| Channel | Units | CAN Id | Offset (bytes) | Length (bytes) | Multiplier | Adder | Notes |
|---|---|---|---|---|---|---|---|
| RPM | RPM | 1056 | 0 | 2 | 1 | 0 | |
| EngineTemp | C | 1056 | 6 | 2 | 0.1 | 0 | |
| OilTemp | C | 1057 | 4 | 2 | 0.1 | 0 | |
| OilPress | Bar | 1057 | 6 | 2 | 0.01 | 0 | |
| TPS | % | 1058 | 2 | 1 | 1 | 0 | |
| Fuel | L | 1070 | 0 | 1 | 1 | 0 |
https://forum.autosportlabs.com/viewtopic.php?p=25261
Is this because it's looking for CAN ID 1056? Are the CAN addresses sequential from 1056 through 1074, set in order for the smartycam?