2M & 4M undulators

apstools/devices/__init__.py

@@ -18,6 +18,10 @@
 from .aps_machine import ApsMachineParametersDevice
 
 from .aps_undulator import PlanarUndulator
+from .aps_undulator import Revolver_Undulator
+from .aps_undulator import STI_Undulator
+from .aps_undulator import Undulator2M
+from .aps_undulator import Undulator4M
 
 from .area_detector_support import AD_EpicsFileNameMixin
 from .area_detector_support import AD_FrameType_schemes

apstools/devices/aps_undulator.py

@@ -7,6 +7,11 @@
    ~PlanarUndulator
    ~Revolver_Undulator
    ~STI_Undulator
+   ~Undulator2M
+   ~Undulator4M
+
+.. note:: The ``ApsUndulator`` and ``ApsUndulatorDual`` device support
+    classes have been removed.  These devices are not used in the APS-U era.
 """
 
 import logging
@@ -166,7 +171,7 @@ class Revolver_Undulator(ID_Spectrum_Mixin, ID_Controls_Mixin, ID_Misc_Mixin, De
 class STI_Undulator(PlanarUndulator):
     """APS Planar Undulator built by STI Optronics.
 
-    .. index:: 
+    .. index::
         Ophyd Device; PlanarUndulator
         Ophyd Device; STI_Undulator
 
@@ -178,6 +183,54 @@ class STI_Undulator(PlanarUndulator):
     """
 
 
+class Undulator2M(ID_Spectrum_Mixin, ID_Controls_Mixin, ID_Misc_Mixin, Device):
+    """APS 2M Undulator.
+
+    .. index::
+        Ophyd Device; PlanarUndulator
+        Ophyd Device; Undulator2M
+
+    APS Use: 1ID, downstream.
+
+    EXAMPLE::
+
+        undulator = Undulator2M("S01ID:DSID:", name="undulator")
+    """
+
+    # PVs not found
+    busy = None
+    magnet = None
+    version_plc = None
+    version_hpmu = None
+
+    done = Component(EpicsSignalRO, "BusyM.VAL", kind="omitted")
+    done_value = 0
+
+
+class Undulator4M(ID_Spectrum_Mixin, ID_Controls_Mixin, ID_Misc_Mixin, Device):
+    """APS 4M Undulator.
+
+    .. index::
+        Ophyd Device; PlanarUndulator
+        Ophyd Device; Undulator4M
+
+    APS Use: 11ID, downstream & upstream.
+
+    EXAMPLE::
+
+        undulator = Undulator4M("S11ID:DSID:", name="undulator")
+    """
+
+    # PVs not found
+    busy = None
+    magnet = None
+    version_plc = None
+    version_hpmu = None
+
+    done = Component(EpicsSignalRO, "BusyM.VAL", kind="omitted")
+    done_value = 0
+
+
 # -----------------------------------------------------------------------------
 # :author:    Pete R. Jemian
 # :email:     [email protected]

apstools/devices/tests/test_aps_undulator.py

@@ -2,22 +2,36 @@
 from ophyd.sim import instantiate_fake_device
 
 from ..aps_undulator import PlanarUndulator
+from ..aps_undulator import Revolver_Undulator
+from ..aps_undulator import STI_Undulator
+from ..aps_undulator import Undulator2M
+from ..aps_undulator import Undulator4M
 
 
-@pytest.fixture()
-def undulator():
-    undulator = instantiate_fake_device(PlanarUndulator, prefix="PSS:255ID:", name="undulator")
-    return undulator
+TEST_PV_PREFIX = "TEST:PREFIX:"
+TEST_CASES = [
+    [PlanarUndulator, TEST_PV_PREFIX],
+    [Revolver_Undulator, TEST_PV_PREFIX],
+    [STI_Undulator, TEST_PV_PREFIX],
+    [Undulator2M, TEST_PV_PREFIX],
+    [Undulator4M, TEST_PV_PREFIX],
+]
 
 
-def test_set_energy(undulator):
+@pytest.mark.parametrize("klass, prefix", TEST_CASES)
+def test_set_energy(klass, prefix):
+    undulator = instantiate_fake_device(klass, prefix=prefix, name="undulator")
+
     assert undulator.start_button.get() == 0
     undulator.energy.set(5)
     assert undulator.energy.setpoint.get() == 5
     assert undulator.start_button.get() == 1
 
 
-def test_stop_energy(undulator):
+@pytest.mark.parametrize("klass, prefix", TEST_CASES)
+def test_stop_energy(klass, prefix):
+    undulator = instantiate_fake_device(klass, prefix=prefix, name="undulator")
+
     assert undulator.stop_button.get() == 0
     undulator.stop()
     assert undulator.stop_button.get() == 1

apstools/tests/__init__.py

@@ -9,7 +9,7 @@
 IOC_GP = "gp:"  # general purpose IOC: motors, scalers, slits, ...
 IOC_AD = "ad:"  # ADSimDetector IOC
 
-MASTER_TIMEOUT = 3
+MASTER_TIMEOUT = 10
 MAX_TESTING_RETRIES = 3
 SHORT_DELAY_FOR_EPICS_IOC_DATABASE_PROCESSING = 2.0 / 60  # two 60Hz clock cycles
 

docs/source/api/_devices.rst

@@ -18,6 +18,7 @@ See these categories:
 * :ref:`devices.aps_support`
 * :ref:`devices.area_detector`
 * :ref:`devices.flyers`
+* :ref:`devices.insertion_devices`
 * :ref:`devices.motors`
 * :ref:`devices.scalers`
 * :ref:`devices.shutters`
@@ -104,6 +105,22 @@ Fly Scan Support
 
 ``ScalerMotorFlyer()`` support withdrawn pending issue #763.
 
+.. _devices.insertion_devices:
+
+Insertion Devices
++++++++++++++++++
+
+.. autosummary::
+
+    ~apstools.devices.aps_undulator.PlanarUndulator
+    ~apstools.devices.aps_undulator.Revolver_Undulator
+    ~apstools.devices.aps_undulator.STI_Undulator
+    ~apstools.devices.aps_undulator.Undulator2M
+    ~apstools.devices.aps_undulator.Undulator4M
+
+.. note:: The ``ApsUndulator`` and ``ApsUndulatorDual`` device support
+    classes have been removed.  These devices are not used in the APS-U era.
+
 .. _devices.motors:
 
 Motors, Positioners, Axes, ...