Enable custom RetryOptions to be specified per API call

sdk/azcore/headers.go

@@ -22,6 +22,7 @@ const (
 	HeaderIfUnmodifiedSince  = "If-Unmodified-Since"
 	HeaderMetadata           = "Metadata"
 	HeaderRange              = "Range"
+	HeaderRetryAfter         = "Retry-After"
 	HeaderURLEncoded         = "application/x-www-form-urlencoded"
 	HeaderUserAgent          = "User-Agent"
 	HeaderXmsDate            = "x-ms-date"

sdk/azcore/policy_logging_test.go

@@ -25,8 +25,10 @@ func TestPolicyLoggingSuccess(t *testing.T) {
 	srv.SetResponse()
 	pl := NewPipeline(srv, NewRequestLogPolicy(RequestLogOptions{}))
 	req := NewRequest(http.MethodGet, srv.URL())
-	req.SetQueryParam("one", "fish")
-	req.SetQueryParam("sig", "redact")
+	qp := req.URL.Query()
+	qp.Set("one", "fish")
+	qp.Set("sig", "redact")
+	req.URL.RawQuery = qp.Encode()
 	resp, err := pl.Do(context.Background(), req)
 	if err != nil {
 		t.Fatalf("unexpected error: %v", err)

sdk/azcore/policy_retry.go

@@ -15,30 +15,26 @@ import (
 )
 
 const (
-	defaultMaxTries = 4
+	defaultMaxRetries = 3
 )
 
 // RetryOptions configures the retry policy's behavior.
 type RetryOptions struct {
-	// MaxTries specifies the maximum number of attempts an operation will be tried before producing an error (0=default).
-	// A value of zero means that you accept our default policy. A value of 1 means 1 try and no retries.
-	MaxTries int32
+	// MaxRetries specifies the maximum number of attempts a failed operation will be retried
+	// before producing an error.  A value of zero means one try and no retries.
+	MaxRetries int32
 
 	// TryTimeout indicates the maximum time allowed for any single try of an HTTP request.
-	// A value of zero means that you accept our default timeout. NOTE: When transferring large amounts
-	// of data, the default TryTimeout will probably not be sufficient. You should override this value
-	// based on the bandwidth available to the host machine and proximity to the service. A good
-	// starting point may be something like (60 seconds per MB of anticipated-payload-size).
 	TryTimeout time.Duration
 
-	// RetryDelay specifies the amount of delay to use before retrying an operation (0=default).
+	// RetryDelay specifies the amount of delay to use before retrying an operation.
 	// The delay increases exponentially with each retry up to a maximum specified by MaxRetryDelay.
 	// If you specify 0, then you must also specify 0 for MaxRetryDelay.
 	// If you specify RetryDelay, then you must also specify MaxRetryDelay, and MaxRetryDelay should be
 	// equal to or greater than RetryDelay.
 	RetryDelay time.Duration
 
-	// MaxRetryDelay specifies the maximum delay allowed before retrying an operation (0=default).
+	// MaxRetryDelay specifies the maximum delay allowed before retrying an operation.
 	// If you specify 0, then you must also specify 0 for RetryDelay.
 	MaxRetryDelay time.Duration
 
@@ -49,9 +45,9 @@ type RetryOptions struct {
 
 var (
 	// StatusCodesForRetry is the default set of HTTP status code for which the policy will retry.
-	StatusCodesForRetry = [6]int{
+	// Changing its value will affect future created clients that use the default values.
+	StatusCodesForRetry = []int{
 		http.StatusRequestTimeout,      // 408
-		http.StatusTooManyRequests,     // 429
 		http.StatusInternalServerError, // 500
 		http.StatusBadGateway,          // 502
 		http.StatusServiceUnavailable,  // 503
@@ -62,14 +58,23 @@ var (
 // DefaultRetryOptions returns an instance of RetryOptions initialized with default values.
 func DefaultRetryOptions() RetryOptions {
 	return RetryOptions{
-		StatusCodes:   StatusCodesForRetry[:],
-		MaxTries:      defaultMaxTries,
+		StatusCodes:   StatusCodesForRetry,
+		MaxRetries:    defaultMaxRetries,
 		TryTimeout:    1 * time.Minute,
 		RetryDelay:    4 * time.Second,
 		MaxRetryDelay: 120 * time.Second,
 	}
 }
 
+// used as a context key for adding/retrieving RetryOptions
+type ctxWithRetryOptionsKey struct{}
+
+// WithRetryOptions adds the specified RetryOptions to the parent context.
+// Use this to specify custom RetryOptions at the API-call level.
+func WithRetryOptions(parent context.Context, options RetryOptions) context.Context {
+	return context.WithValue(parent, ctxWithRetryOptionsKey{}, options)
+}
+
 func (o RetryOptions) calcDelay(try int32) time.Duration { // try is >=1; never 0
 	pow := func(number int64, exponent int32) int64 { // pow is nested helper function
 		var result int64 = 1
@@ -105,6 +110,11 @@ type retryPolicy struct {
 }
 
 func (p *retryPolicy) Do(ctx context.Context, req *Request) (resp *Response, err error) {
+	options := p.options
+	// check if the retry options have been overridden for this call
+	if override := ctx.Value(ctxWithRetryOptionsKey{}); override != nil {
+		options = override.(RetryOptions)
+	}
 	// Exponential retry algorithm: ((2 ^ attempt) - 1) * delay * random(0.8, 1.2)
 	// When to retry: connection failure or temporary/timeout.
 	if req.Body != nil {
@@ -134,14 +144,14 @@ func (p *retryPolicy) Do(ctx context.Context, req *Request) (resp *Response, err
 		}
 
 		// Set the time for this particular retry operation and then Do the operation.
-		tryCtx, tryCancel := context.WithTimeout(ctx, p.options.TryTimeout)
+		tryCtx, tryCancel := context.WithTimeout(ctx, options.TryTimeout)
 		resp, err = req.Next(tryCtx) // Make the request
 		tryCancel()
 		if shouldLog {
 			Log().Write(LogRetryPolicy, fmt.Sprintf("Err=%v, response=%v\n", err, resp))
 		}
 
-		if err == nil && !resp.HasStatusCode(p.options.StatusCodes...) {
+		if err == nil && !resp.HasStatusCode(options.StatusCodes...) {
 			// if there is no error and the response code isn't in the list of retry codes then we're done.
 			return
 		} else if ctx.Err() != nil {
@@ -155,15 +165,15 @@ func (p *retryPolicy) Do(ctx context.Context, req *Request) (resp *Response, err
 		// drain before retrying so nothing is leaked
 		resp.Drain()
 
-		if try == p.options.MaxTries {
+		if try == options.MaxRetries+1 {
 			// max number of tries has been reached, don't sleep again
 			return
 		}
 
 		// use the delay from retry-after if available
 		delay, ok := resp.RetryAfter()
 		if !ok {
-			delay = p.options.calcDelay(try)
+			delay = options.calcDelay(try)
 		}
 		if shouldLog {
 			Log().Write(LogRetryPolicy, fmt.Sprintf("Try=%d, Delay=%v\n", try, delay))

sdk/azcore/policy_retry_test.go

@@ -61,10 +61,10 @@ func TestRetryPolicyFailOnStatusCode(t *testing.T) {
 	if resp.StatusCode != http.StatusInternalServerError {
 		t.Fatalf("unexpected status code: %d", resp.StatusCode)
 	}
-	if r := srv.Requests(); r != defaultMaxTries {
-		t.Fatalf("wrong retry count, got %d expected %d", r, defaultMaxTries)
+	if r := srv.Requests(); r != defaultMaxRetries+1 {
+		t.Fatalf("wrong request count, got %d expected %d", r, defaultMaxRetries+1)
 	}
-	if body.rcount != defaultMaxTries-1 {
+	if body.rcount != defaultMaxRetries {
 		t.Fatalf("unexpected rewind count: %d", body.rcount)
 	}
 	if !body.closed {
@@ -116,10 +116,10 @@ func TestRetryPolicyFailOnError(t *testing.T) {
 	if resp != nil {
 		t.Fatal("unexpected response")
 	}
-	if r := srv.Requests(); r != defaultMaxTries {
-		t.Fatalf("wrong retry count, got %d expected %d", r, defaultMaxTries)
+	if r := srv.Requests(); r != defaultMaxRetries+1 {
+		t.Fatalf("wrong request count, got %d expected %d", r, defaultMaxRetries+1)
 	}
-	if body.rcount != defaultMaxTries-1 {
+	if body.rcount != defaultMaxRetries {
 		t.Fatalf("unexpected rewind count: %d", body.rcount)
 	}
 	if !body.closed {
@@ -145,10 +145,10 @@ func TestRetryPolicySuccessWithRetryComplex(t *testing.T) {
 	if resp.StatusCode != http.StatusAccepted {
 		t.Fatalf("unexpected status code: %d", resp.StatusCode)
 	}
-	if r := srv.Requests(); r != defaultMaxTries {
-		t.Fatalf("wrong retry count, got %d expected %d", r, 3)
+	if r := srv.Requests(); r != defaultMaxRetries+1 {
+		t.Fatalf("wrong request count, got %d expected %d", r, defaultMaxRetries+1)
 	}
-	if body.rcount != defaultMaxTries-1 {
+	if body.rcount != defaultMaxRetries {
 		t.Fatalf("unexpected rewind count: %d", body.rcount)
 	}
 	if !body.closed {
@@ -212,6 +212,35 @@ func TestRetryPolicyIsNotRetriable(t *testing.T) {
 	}
 }
 
+func TestWithRetryOptions(t *testing.T) {
+	srv, close := mock.NewServer()
+	defer close()
+	srv.RepeatResponse(9, mock.WithStatusCode(http.StatusRequestTimeout))
+	srv.AppendResponse(mock.WithStatusCode(http.StatusOK))
+	defaultOptions := testRetryOptions()
+	pl := NewPipeline(srv, NewRetryPolicy(defaultOptions))
+	customOptions := *defaultOptions
+	customOptions.MaxRetries = 10
+	customOptions.MaxRetryDelay = 200 * time.Millisecond
+	retryCtx := WithRetryOptions(context.Background(), customOptions)
+	req := NewRequest(http.MethodGet, srv.URL())
+	body := newRewindTrackingBody("stuff")
+	req.SetBody(body)
+	resp, err := pl.Do(retryCtx, req)
+	if err != nil {
+		t.Fatalf("unexpected error: %v", err)
+	}
+	if resp.StatusCode != http.StatusOK {
+		t.Fatalf("unexpected status code: %d", resp.StatusCode)
+	}
+	if body.rcount != int(customOptions.MaxRetries-1) {
+		t.Fatalf("unexpected rewind count: %d", body.rcount)
+	}
+	if !body.closed {
+		t.Fatal("request body wasn't closed")
+	}
+}
+
 // TODO: add test for retry failing to read response body
 
 // TODO: add test for per-retry timeout failed but e2e succeeded

sdk/azcore/request.go

@@ -27,7 +27,6 @@ const (
 type Request struct {
 	*http.Request
 	policies []Policy
-	qp       url.Values
 	values   opValues
 }
 
@@ -79,11 +78,6 @@ func (req *Request) Next(ctx context.Context) (*Response, error) {
 	nextPolicy := req.policies[0]
 	nextReq := *req
 	nextReq.policies = nextReq.policies[1:]
-	// encode any pending query params
-	if nextReq.qp != nil {
-		nextReq.Request.URL.RawQuery = nextReq.qp.Encode()
-		nextReq.qp = nil
-	}
 	return nextPolicy.Do(ctx, &nextReq)
 }
 
@@ -125,14 +119,6 @@ func (req *Request) OperationValue(value interface{}) bool {
 	return req.values.get(value)
 }
 
-// SetQueryParam sets the key to value.
-func (req *Request) SetQueryParam(key, value string) {
-	if req.qp == nil {
-		req.qp = req.Request.URL.Query()
-	}
-	req.qp.Set(key, value)
-}
-
 // SetBody sets the specified ReadSeekCloser as the HTTP request body.
 func (req *Request) SetBody(body ReadSeekCloser) error {
 	// Set the body and content length.

sdk/azcore/response.go

@@ -96,13 +96,21 @@ func (r *Response) removeBOM() {
 	}
 }
 
-// RetryAfter returns (non-zero, true) if the response contains a Retry-After header value
+// RetryAfter returns (non-zero, true) if the response contains a Retry-After header value.
 func (r *Response) RetryAfter() (time.Duration, bool) {
 	if r == nil {
 		return 0, false
 	}
-	if retryAfter, _ := strconv.Atoi(r.Header.Get("Retry-After")); retryAfter > 0 {
+	ra := r.Header.Get(HeaderRetryAfter)
+	if ra == "" {
+		return 0, false
+	}
+	// retry-after values are expressed in either number of
+	// seconds or an HTTP-date indicating when to try again
+	if retryAfter, _ := strconv.Atoi(ra); retryAfter > 0 {
 		return time.Duration(retryAfter) * time.Second, true
+	} else if t, err := time.Parse(time.RFC1123, ra); err == nil {
+		return t.Sub(time.Now()), true
 	}
 	return 0, false
 }

sdk/azcore/response_test.go

@@ -9,6 +9,7 @@ import (
 	"context"
 	"net/http"
 	"testing"
+	"time"
 
 	"github.com/Azure/azure-sdk-for-go/sdk/internal/mock"
 )
@@ -103,3 +104,31 @@ func TestResponseUnmarshalXMLNoBody(t *testing.T) {
 		t.Fatalf("unexpected error unmarshalling: %v", err)
 	}
 }
+
+func TestRetryAfter(t *testing.T) {
+	raw := &http.Response{
+		Header: http.Header{},
+	}
+	resp := Response{raw}
+	if d, ok := resp.RetryAfter(); ok {
+		t.Fatalf("unexpected retry-after value %d", d)
+	}
+	raw.Header.Set(HeaderRetryAfter, "300")
+	d, ok := resp.RetryAfter()
+	if !ok {
+		t.Fatal("expected retry-after value from seconds")
+	}
+	if d != 300*time.Second {
+		t.Fatalf("expected 300 seconds, got %d", d/time.Second)
+	}
+	atDate := time.Now().Add(600 * time.Second)
+	raw.Header.Set(HeaderRetryAfter, atDate.Format(time.RFC1123))
+	d, ok = resp.RetryAfter()
+	if !ok {
+		t.Fatal("expected retry-after value from date")
+	}
+	// d will not be exactly 600 seconds but it will be close
+	if d/time.Second != 599 {
+		t.Fatalf("expected ~600 seconds, got %d", d/time.Second)
+	}
+}