updating to torvalds/linux master #8
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
A custom allocator without __GFP_COMP that copies to userspace has been found in vmw_execbuf_process[1], so this disables the page-span checker by placing it behind a CONFIG for future work where such things can be tracked down later. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1373326 Reported-by: Vinson Lee <[email protected]> Fixes: f5509cc ("mm: Hardened usercopy") Signed-off-by: Kees Cook <[email protected]>
…/git/kdave/linux into for-linus-4.8
…inux/kernel/git/kees/linux Pull more hardened usercopyfixes from Kees Cook: - force check_object_size() to be inline too - move page-spanning check behind a CONFIG since it's triggering false positives [ Changed the page-spanning config option to depend on EXPERT in the merge. That way it still gets build testing, and you can enable it if you want to, but is never enabled for "normal" configurations ] * tag 'usercopy-v4.8-rc6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: remove page-spanning test for now usercopy: force check_object_size() inline
This reverts commit 7d4defe. The commit was pointless, manically trembling in the dark for a solution. The real fixes are: commit 048c28c ("gpio: make any OF dependent driver depend on OF_GPIO") commit 2527ecc ("gpio: Fix OF build problem on UM") Reported-by: Chris Wilson <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein <[email protected]> Cc: Phil Reid <[email protected]> Reported-by: kbuild test robot <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d4 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d4 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
In pnv_ioda_free_pe(), the PE object (including the associated PE number) is cleared before resetting the corresponding bit in the PE allocation bitmap. It means PE#0 is always released to the bitmap wrongly. This fixes above issue by caching the PE number before the PE object is cleared. Fixes: 1e91677 ("powerpc/powernv: Use PE instead of number during setup and release" Cc: [email protected] # v4.7+ Signed-off-by: Gavin Shan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Commit 7aef413 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and len is lower than cacheline size. In that case the resulting csum value doesn't have to be rotated one byte because the cache-aligned copy part is skipped so no alignment is performed. Fixes: 7aef413 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Cc: [email protected] # v4.6+ Reported-by: Alessio Igor Bogani <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Tested-by: Alessio Igor Bogani <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
In commit c60ac56 ("powerpc: Update kernel VSID range", 2013-03-13) we lost a check on the region number (the top four bits of the effective address) for addresses below PAGE_OFFSET. That commit replaced a check that the top 18 bits were all zero with a check that bits 46 - 59 were zero (performed for all addresses, not just user addresses). This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx and we will insert a valid SLB entry for it. The VSID used will be the same as if the top 4 bits were 0, but the page size will be some random value obtained by indexing beyond the end of the mm_ctx_high_slices_psize array in the paca. If that page size is the same as would be used for region 0, then userspace just has an alias of the region 0 space. If the page size is different, then no HPTE will be found for the access, and the process will get a SIGSEGV (since hash_page_mm() will refuse to create a HPTE for the bogus address). The access beyond the end of the mm_ctx_high_slices_psize can be at most 5.5MB past the array, and so will be in RAM somewhere. Since the access is a load performed in real mode, it won't fault or crash the kernel. At most this bug could perhaps leak a little bit of information about blocks of 32 bytes of memory located at offsets of i * 512kB past the paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11. Fixes: c60ac56 ("powerpc: Update kernel VSID range") Cc: [email protected] # v3.9+ Signed-off-by: Paul Mackerras <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
This reverts commit b5c86b7. This is no longer needed due to other changes going into 4.8 to rename the unit addresses on a large number of device nodes. So it was picked up for v4.8-rc1 in error. Reported-by: Ralf Ramsauer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
…nel/git/shawnguo/linux into fixes i.MX fixes for 4.8, 2nd round: - Fix misspelled "ti,x-plate-ohms" property name of touchscreen controller for imx7d-sdb DTS. - Add missing BM_CLPCR_BYPASS_PMIC_READY setting for i.MX6SX to get suspend/resume work properly. - Fix SPDIF regression on imx6qdl which caused by a clock update on spdif device node. * tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name Signed-off-by: Olof Johansson <[email protected]>
For one of the CCI events exposed under sysfs, "snoop" was typo'd as "snopp". Correct this such that users see the expected event name when enumerating events via sysfs. Cc: [email protected] Acked-by: Mark Rutland <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
…ux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.8 A single patch fixing a typo in the temperature trip points in the A13 DTSI. * tag 'sunxi-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sun5i: Fix typo in trip point temperature Signed-off-by: Olof Johansson <[email protected]>
…t/rzhang/linux Pull thermal fix from Zhang Rui: "Only one patch this time, which fixes a crash in rcar_thermal driver. From Dirk Behme" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar_thermal: Fix priv->zone error handling
Running lguest without arguments or with a wrong argument name borks the terminal, because the cleanup handler is set up too late in the initialization process. Signed-off-by: Daniel Baluta <[email protected]> Signed-off-by: Rusty Russell <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
If the topology package map check of the APIC ID and the CPU is a failure, we don't generate the processor info for that APIC ID yet we increase disabled_cpus by one - which is buggy. Only increase num_processors once we are sure we don't fail. Signed-off-by: Dou Liyang <[email protected]> Acked-by: David Rientjes <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <[email protected]>
The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
dmi_dev is freed in error exit code but, according to the document of device_register, it should never directly free device structure after calling this function, even if it returned an error! Use put_device() instead. Signed-off-by: Allen Hung <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
When a user timer instance is continued without the explicit start beforehand, the system gets eventually zero-division error like: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88003c9b2280 task.stack: ffff880027280000 RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195 RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62 Call Trace: <IRQ> [< inline >] __run_hrtimer kernel/time/hrtimer.c:1238 [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302 [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336 [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933 [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957 [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487 <EOI> ..... Although a similar issue was spotted and a fix patch was merged in commit [6b760bb: ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of iceberg. In this patch, we fix the issue a bit more drastically. Basically the continue of an uninitialized timer is supposed to be a fresh start, so we do it for user timers. For the direct snd_timer_continue() call, there is no way to pass the initial tick value, so we kick out for the uninitialized case. Reported-by: Dmitry Vyukov <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
When a seq-virmidi driver is initialized, it registers a rawmidi instance with its callback to create an associated seq kernel client. Currently it's done throughly in rawmidi's register_mutex context. Recently it was found that this may lead to a deadlock another rawmidi device that is being attached with the sequencer is accessed, as both open with the same register_mutex. This was actually triggered by syzkaller, as Dmitry Vyukov reported: ====================================================== [ INFO: possible circular locking dependency detected ] 4.8.0-rc1+ #11 Not tainted ------------------------------------------------------- syz-executor/7154 is trying to acquire lock: (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 but task is already holding lock: (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&grp->list_mutex){++++.+}: [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22 [< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681 [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822 [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418 [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101 [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297 [< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383 [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450 [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645 [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164 [< inline >] __snd_device_register sound/core/device.c:162 [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212 [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749 [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123 [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564 ...... -> #0 (register_mutex#5){+.+.+.}: [< inline >] check_prev_add kernel/locking/lockdep.c:1829 [< inline >] check_prevs_add kernel/locking/lockdep.c:1939 [< inline >] validate_chain kernel/locking/lockdep.c:2266 [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335 [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [< inline >] __mutex_lock_common kernel/locking/mutex.c:521 [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621 [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188 [< inline >] subscribe_port sound/core/seq/seq_ports.c:427 [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510 [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579 [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480 [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225 [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440 [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375 [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281 [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274 [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138 [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639 ...... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&grp->list_mutex); lock(register_mutex#5); lock(&grp->list_mutex); lock(register_mutex#5); *** DEADLOCK *** ====================================================== The fix is to simply move the registration parts in snd_rawmidi_dev_register() to the outside of the register_mutex lock. The lock is needed only to manage the linked list, and it's not necessarily to cover the whole initialization process. Reported-by: Dmitry Vyukov <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs. If this clock isn't handled correctly by ST's EHCI/OHCI
drivers, their hub won't be found, the following error be shown and the
result will be non-working USB:
[ 97.221963] hub 2-1:1.0: hub_ext_port_status failed (err = -110)
Cc: [email protected]
Tested-by: Peter Griffin <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Acked-by: Patrice Chotard <[email protected]>
…in ST SDHCI
The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs. If these clocks aren't handled correctly by ST's SDHCI
driver MMC will break and the following output can be observed:
[ 13.916949] mmc0: Timeout waiting for hardware interrupt.
[ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)===========
[ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002
[ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001
[ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013
[ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011
[ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07
[ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000
[ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000
[ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000
[ 13.992252] sdhci: Host ctl2: 0x00000000
[ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200
[ 14.001990] sdhci: ===========================================
[ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress.
Cc: [email protected]
Tested-by: Peter Griffin <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Acked-by: Patrice Chotard <[email protected]>
When booting a kvm guest on AMD with the latest kernel the following messages are displayed in the boot log: tsc: Unable to calibrate against PIT tsc: HPET/PMTIMER calibration failed aa29729 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") introduced a change to account for a difference in cpu and tsc frequencies for Intel SKL processors. Before this change the native tsc set x86_platform.calibrate_tsc to native_calibrate_tsc() which is a hardware calibration of the tsc, and in tsc_init() executed tsc_khz = x86_platform.calibrate_tsc(); cpu_khz = tsc_khz; The kvm code changed x86_platform.calibrate_tsc to kvm_get_tsc_khz() and executed the same tsc_init() function. This meant that KVM guests did not execute the native hardware calibration function. After aa29729, there are separate native calibrations for cpu_khz and tsc_khz. The code sets x86_platform.calibrate_tsc to native_calibrate_tsc() which is now an Intel specific calibration function, and x86_platform.calibrate_cpu to native_calibrate_cpu() which is the "old" native_calibrate_tsc() function (ie, the native hardware calibration function). tsc_init() now does cpu_khz = x86_platform.calibrate_cpu(); tsc_khz = x86_platform.calibrate_tsc(); if (tsc_khz == 0) tsc_khz = cpu_khz; else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz) cpu_khz = tsc_khz; The kvm code should not call the hardware initialization in native_calibrate_cpu(), as it isn't applicable for kvm and it didn't do that prior to aa29729. This patch resolves this issue by setting x86_platform.calibrate_cpu to kvm_get_tsc_khz(). v2: I had originally set x86_platform.calibrate_cpu to cpu_khz_from_cpuid(), however, pbonzini pointed out that the CPUID leaf in that function is not available in KVM. I have changed the function pointer to kvm_get_tsc_khz(). Fixes: aa29729 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") Signed-off-by: Prarit Bhargava <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Cc: Len Brown <[email protected]> Cc: "Peter Zijlstra (Intel)" <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: "Christopher S. Hall" <[email protected]> Cc: David Woodhouse <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by: Wolfram Sang <[email protected]> Fixes: 50a5ba8 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Wolfram Sang <[email protected]>
Make it clear that adding slave support shall not disable master functionality. We can have both, so we should. Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wenbo Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
The md-cluster is compiled as module by default, if it is compiled by built-in way, then we can't make md-cluster works. [64782.630008] md/raid1:md127: active with 2 out of 2 mirrors [64782.630528] md-cluster module not found. [64782.630530] md127: Could not setup cluster service (-2) Fixes: edb39c9 ("Introduce md_cluster_operations to handle cluster functions") Cc: [email protected] (v4.1+) Reported-by: Marc Smith <[email protected]> Reviewed-by: NeilBrown <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
…/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"This is a slightly larger batch of fixes that we've been sitting on a
few -rcs. Most of them are simple oneliners, but there are two sets
that are slightly larger and worth pointing out:
- A set of patches to OMAP to deal with hwmod for RTC on am33xx
(beaglebone SoC, among others). It's the only clock that ever has
a valid offset of 0, so a new flag needed introduction once this
problem was discovered.
- A collection of CCI fixes for performance counters discovered once
people started using it on X-Gene CPUs"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
arm-cci: pmu: Fix typo in event name
Revert "ARM: tegra: fix erroneous address in dts"
ARM: dts: imx6qdl: Fix SPDIF regression
ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
ARM: dts: kirkwood: Fix PCIe label on OpenRD
ARM: kirkwood: ib62x0: fix size of u-boot environment partition
bus: arm-ccn: make event groups reliable
bus: arm-ccn: fix hrtimer registration
bus: arm-ccn: fix PMU interrupt flags
ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
MAINTAINERS: add tree entry for ARM/UniPhier architecture
ARM: sun5i: Fix typo in trip point temperature
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: imx6ul: populates platform device at .init_machine
bus: arm-ccn: Add missing event attribute exclusions for host/guest
bus: arm-ccn: Correct required arguments for XP PMU events
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
...
…rnel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi-id: don't free dev structure after calling device_register
When sending QP1 MAD packets which use a GRH, the source GID (which consists of the 64-bit subnet prefix, and the 64 bit port GUID) must be included in the packet GRH. For SR-IOV, a GID cache is used, since the source GID needs to be the slave's source GID, and not the Hypervisor's GID. This cache also included a subnet_prefix. Unfortunately, the subnet_prefix field in the cache was never initialized (to the default subnet prefix 0xfe80::0). As a result, this field remained all zeroes. Therefore, when SR-IOV was active, all QP1 packets which included a GRH had a source GID subnet prefix of all-zeroes. However, the subnet-prefix should initially be 0xfe80::0 (the default subnet prefix). In addition, if OpenSM modifies a port's subnet prefix, the new subnet prefix must be used in the GRH when sending QP1 packets. To fix this we now initialize the subnet prefix in the SR-IOV GID cache to the default subnet prefix. We update the cached value if/when OpenSM modifies the port's subnet prefix. We take this cached value when sending QP1 packets when SR-IOV is active. Note that the value is stored as an atomic64. This eliminates any need for locking when the subnet prefix is being updated. Note also that we depend on the FW generating the "port management change" event for tracking subnet-prefix changes performed by OpenSM. If running early FW (before 2.9.4630), subnet prefix changes will not be tracked (but the default subnet prefix still will be stored in the cache; therefore users who do not modify the subnet prefix will not have a problem). IF there is a need for such tracking also for early FW, we will add that capability in a subsequent patch. Fixes: 1ffeb2e ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Modify the mlx4_ib_diag_counters() to avoid the following error in the hypervisor when the slave tries to query the hardware counters in SR-IOV mode. mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1 Fixes: 3f85f2a ("IB/mlx4: Add diagnostic hardware counters") Signed-off-by: Kamal Heib <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
MAD_IFC command is supported only for physical functions (PF) and when physical port is IB. The proposed fix enforces it. Fixes: d603c80 ("IB/mlx5: Fix decision on using MAD_IFC") Reported-by: David Chang <[email protected]> Signed-off-by: Noa Osherovich <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Set the source mac address in the FTE when L2 specification is provided. Fixes: 038d2ef ('IB/mlx5: Add flow steering support') Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Disable creation of a UDP socket for ipv6 when CONFIG_IPV6 is not enabeld. Since udp_sock_create6() returns 0 when CONFIG_IPV6 is not set [ 46.888632] IP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f [ 46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 [ 46.893918] Oops: 0002 [#1] PREEMPT [ 46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e #1 [ 46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000 [ 46.907854] EIP: 0060:[<c220705a>] EFLAGS: 00210246 CPU: 0 [ 46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f [ 46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0 [ 46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0 [ 46.919836] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0 [ 46.924550] Stack: [ 46.926014] cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008 [ 46.931274] 00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000 [ 46.936122] cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74 [ 46.942350] Call Trace: [ 46.944403] [<c1fd4657>] rxe_setup_udp_tunnel+0x8f/0x99 [ 46.947689] [<c1fd48de>] ? net_to_rxe+0x4e/0x4e [ 46.950567] [<c1fd4bdf>] rxe_net_init+0xe/0xa4 [ 46.953147] [<c2c4507b>] rxe_module_init+0x20/0x4c [ 46.955448] [<c2bf1c74>] do_one_initcall+0x89/0x113 [ 46.957797] [<c2bf15eb>] ? set_debug_rodata+0xf/0xf [ 46.959966] [<c2bf1dbc>] ? kernel_init_freeable+0xbe/0x15b [ 46.962262] [<c2bf1ddc>] kernel_init_freeable+0xde/0x15b [ 46.964418] [<c232eb54>] kernel_init+0x8/0xd0 [ 46.966618] [<c2333122>] ret_from_kernel_thread+0xe/0x24 [ 46.969592] [<c232eb4c>] ? rest_init+0x6f/0x6f Fixes: 8700e3e ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
When handling ack for atomic opcodes like "fetch&add" or "cmp&swp", the method send_atomic_ack() saves the ack before sending it, in case it gets lost and never reach the requester. In which case the method duplicate_request() will need to find it using the duplicated request.psn. But send_atomic_ack() used a wrong psn value and thus the above ack was never found. This fix uses the ack.psn to locate the ack in case its needed. This fix also copies the ack packet to the skb's control buffer since duplicate_request() will need it when calling rxe_xmit_packet() Fixes: 8700e3e ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
rxe_requester() is sending a pkt with rxe_xmit_packet() and then calls rxe_update() to update the wqe and qp's psn values. But sometimes the response is received before the requester had time to update the wqe in which case the completer acts on errornous wqe values. This fix updates the wqe and qp before actually sending the request and rolls back when xmit fails. Fixes: 8700e3e ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Decrement qp reference when handling error path in completer to prevent kmem_cache leak. Fixes: 8700e3e ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
The userspace memory region 'mr' is allocated with kzalloc in __rvt_alloc_mr however it is incorrectly being freed with vfree in __rvt_free_mr. Fix this by using kfree to free it. Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Pull ARM fixes from Russell King:
"Most of this update are fixes primarily discovered from testing on the
older StrongARM 1110 and PXA systems, as a result of recent interest
from several people in these platforms:
- Locomo interrupt handling incorrectly stores the handler data in
the chip's private data slot: when Locomo is combined with an
interrupt controller who's chip uses the chip private data, this
leads to an oops.
- SA1111 was missing a call to clk_disable() to clean up after a
failed probe.
- SA1111 and PCMCIA suspend/resume was broken:
The PCMCIA "ds" layer was using the legacy bus suspend/resume
methods, which the core PM code is no longer calling as a result of
device_pm_check_callbacks() introduced in commit aa8e54b
("PM / sleep: Go direct_complete if driver has no callbacks").
SA1111 was broken due to changes to PCMCIA which makes PCMCIA
suspend itself later than the SA1111 code expects, and resume
before the SA1111 code has initialised access to the pcmcia
sub-device.
- the default SA1111 interrupt mask polarity got messed up when it
was converted to use a dynamic interrupt base number for its
interrupts.
- fix platform_get_irq() error code propagation, which was causing
problems on platforms where the interrupt may not be available at
probe time in DT setups.
- fix the lack of clock to PCMCIA code on PXA platforms, which was
omitted in conversions of PXA to CCF.
- fix an oops in the PXA PCMCIA code caused by a previous commit not
realising that Lubbock is different from the rest of the PXA PCMCIA
drivers.
- ensure that SA1111 low-level PCMCIA drivers propagate their error
codes to the main probe function, rather than the driver silently
accepting a failure.
- fix the sa11xx debugfs reporting of timing information, which
always indicated zero due to the clock being a factor of 1000 out.
- fix the polarity of the status change signal reported from the
sockets.
Lastly, one ARM specific commit from Stefan Agner fixing the LPAE
cache attributes"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: pxa/lubbock: add pcmcia clock
ARM: locomo: fix locomo irq handling
ARM: 8612/1: LPAE: initialize cache policy correctly
ARM: sa1111: fix missing clk_disable()
ARM: sa1111: fix pcmcia suspend/resume
ARM: sa1111: fix pcmcia interrupt mask polarity
ARM: sa1111: fix error code propagation in sa1111_probe()
pcmcia: lubbock: fix sockets configuration
pcmcia: sa1111: fix propagation of lowlevel board init return code
pcmcia: soc_common: fix SS_STSCHG polarity
pcmcia: sa11xx_base: add units to the timing information
pcmcia: sa11xx_base: fix reporting of timing information
pcmcia: ds: fix suspend/resume
…nel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple of bugfixes for v4.8-rc.
Most of them have actually been around for a while this time but for
some reason didn't get applied early on. The shmobile regulator fix
is the only one that isn't completely obvious.
Device tree changes:
- archtimer interrupts must be level triggered (multiple platforms)
- fix for USB and MMC clocks on STiH410
- fix split DT repository in case of raspberry-pi 3
- a new use of skeleton.dtsi on arm64 has crept in after that was
removed.
defconfig updates:
- xilinx vdma has a new Kconfig symbol name
- keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1
Code fixes:
- fix regulator quirk on shmobile
- suspend-to-ram regression on EXYNOS
Maintainer updates:
- Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: keystone: defconfig: Fix USB configuration
arm64: dts: Fix broken architected timer interrupt trigger
ARM: multi_v7_defconfig: update XILINX_VDMA
ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
ARM: shmobile: fix regulator quirk for Gen2
ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
MAINTAINERS: Add myself as reviewer for Samsung Exynos support
…t/dledford/rdma Pull rdma fixes from Doug Ledford: "Round three of 4.8 rc fixes. This is likely the last rdma pull request this cycle. The new rxe driver had a few issues (you probably saw the boot bot bug report) and they should be addressed now. There are a couple other fixes here, mainly mlx4. There are still two outstanding issues that need resolved but I don't think their fix will make this kernel cycle. Summary: - Various fixes to rdmavt, ipoib, mlx5, mlx4, rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/rdmavt: Don't vfree a kzalloc'ed memory region IB/rxe: Fix kmem_cache leak IB/rxe: Fix race condition between requester and completer IB/rxe: Fix duplicate atomic request handling IB/rxe: Fix kernel panic in udp_setup_tunnel IB/mlx5: Set source mac address in FTE IB/mlx5: Enable MAD_IFC commands for IB ports only IB/mlx4: Diagnostic HW counters are not supported in slave mode IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV IB/mlx4: Fix code indentation in QP1 MAD flow IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV IB/ipoib: Don't allow MC joins during light MC flush IB/rxe: fix GFP_KERNEL in spinlock context
…rg/drm-intel into drm-fixes i915 fixes from Jani. * tag 'drm-intel-fixes-2016-09-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message
… into drm-fixes This pull request brings in a fix for crashes in X on VC4. * tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux: drm/vc4: mark vc4_bo_cache_purge() static drm/vc4: Allow some more signals to be packed with uniform resets.
…it/rafael/linux-pm Pull power management fix from Rafael Wysocki: "More annotations of tracepoints in the runtime PM framework to prevent RCU from complaining when that code is invoked from the idle path (Paul McKenney)" * tag 'pm-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Use _rcuidle for runtime suspend tracepoints
…rlied/linux Pull drm fixes from Dave Airlie: "Two sets of i915 fixes, one set of vc4 crasher fixes, and a couple of atmel fixes. Nothing too out there at this stage, though I think some people are holidaying so it's been quiet enough" * tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linux: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message drm/vc4: mark vc4_bo_cache_purge() static drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB drm/i915: disable 48bit full PPGTT when vGPU is active drm/i915: enable vGPU detection for all drm/atmel-hlcdc: Make ->reset() implementation static drm: atmel-hlcdc: Fix vertical scaling drm/vc4: Allow some more signals to be packed with uniform resets. drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
Pull nfsd bugfix from Bruce Fields: "Fix a memory corruption bug that I introduced in 4.7" * tag 'nfsd-4.8-2' of git://linux-nfs.org/~bfields/linux: svcauth_gss: Revert 64c59a3 ("Remove unnecessary allocation")
Pull cifs fixes from Steve French: "Small set of cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: Move check for prefix path to within cifs_get_root() Compare prepaths when comparing superblocks Fix memory leaks in cifs_do_mount()
…l/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for code merged this cycle:
- Fix restore of SPRs upon wake up from hypervisor state loss from
Gautham R Shenoy
- Fix the state of root PE from Gavin Shan
- Detach from PE on releasing PCI device from Gavin Shan
- Fix size of NUM_CPU_FTR_KEYS on 32-bit
- Fix missed TCE invalidations that should fallback to OPAL"
* tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL
powerpc/powernv: Detach from PE on releasing PCI device
powerpc/powernv: Fix the state of root PE
powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit
powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss
Pull MMC fixes from Ulf Hansson: "MMC host: - omap/omap_hsmmc: Initialize dma_slave_config to avoid random data - sdhci-st: Handle interconnect clock" * tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: omap: Initialize dma_slave_config to avoid random data in it's fields mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data mmc: sdhci-st: Handle interconnect clock dt-bindings: mmc: sdhci-st: Mention the discretionary "icn" clock
... by turning it into what used to be multipages counterpart Cc: [email protected] Signed-off-by: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
avr32 builds fail with: arch/avr32/kernel/built-in.o: In function `arch_ptrace': (.text+0x650): undefined reference to `___copy_from_user' arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax': (.text+0x5dd8): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin': sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user' kernel/built-in.o: In function `ptrace_has_cap': ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user' kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to `___copy_from_user' follow Fixes: 8630c32 ("avr32: fix copy_from_user()") Cc: Al Viro <[email protected]> Acked-by: Havard Skinnemoen <[email protected]> Acked-by: Hans-Christian Noren Egtvedt <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
Since commit acb2505 ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <[email protected]> Fixes: acb2505 ("openrisc: fix copy_from_user()") Signed-off-by: Guenter Roeck <[email protected]>
…inux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two patches from Boris which address a potential deadlock in the atmel
irq chip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/atmel-aic: Fix potential deadlock in ->xlate()
genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
…inux/kernel/git/tip/tip Pull SMP build fixlet from Thomas Gleixner: "Add a missing include in cpuhotplug.h" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Include linux/types.h in linux/cpuhotplug.h
…linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A couple of small fixes to x86 perf drivers: - Measure L2 for HW_CACHE* events on AMD - Fix the address filter handling in the intel/pt driver - Handle the BTS disabling at the proper place" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Make HW_CACHE_REFERENCES and HW_CACHE_MISSES measure L2 perf/x86/intel/pt: Do validate the size of a kernel address filter perf/x86/intel/pt: Fix kernel address filter's offset validation perf/x86/intel/pt: Fix an off-by-one in address filter configuration perf/x86/intel: Don't disable "intel_bts" around "intel" event batching
…linux/kernel/git/groeck/linux-staging Pull uaccess fixes from Guenter Roeck: "Two patches fixing problems introduced with copy_from_user changes" * tag 'fixes-for-linus-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: openrisc: fix the fix of copy_from_user() avr32: fix 'undefined reference to `___copy_from_user'
…git/gregkh/usb Pull USB fixes from Greg KH: "Here are two small fixes, and one new device id, for 4.8-rc7 The fixes solve a build error that was reported in your tree for the blackfin arch, and resolve an issue with a number of broken USB devices that reported the wrong interval rate. Included here is also a new device id for the usb-serial driver. All have been in linux-next with no reported issues" * tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: change bInterval default to 10 ms usb: musb: Fix tusb6010 compile error on blackfin USB: serial: simple: add support for another Infineon flashloader
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
updating tree to torvalds/linux master branch for recent latests changes in kernel