macOS12.3.1，M1，Downloading后自动结束了 #25
Comments
marcan
pushed a commit
that referenced
this issue
Jun 21, 2022
This commit adds python script to parse CoreSight tracing event and
print out source line and disassembly, it generates readable program
execution flow for easier humans inspecting.
The script receives CoreSight tracing packet with below format:
+------------+------------+------------+
packet(n): | addr | ip | cpu |
+------------+------------+------------+
packet(n+1): | addr | ip | cpu |
+------------+------------+------------+
packet::addr presents the start address of the coming branch sample, and
packet::ip is the last address of the branch smple. Therefore, a code
section between branches starts from packet(n)::addr and it stops at
packet(n+1)::ip. As results we combines the two continuous packets to
generate the address range for instructions:
[ sample(n)::addr .. sample(n+1)::ip ]
The script supports both objdump or llvm-objdump for disassembly with
specifying option '-d'. If doesn't specify option '-d', the script
simply outputs source lines and symbols.
Below shows usages with llvm-objdump or objdump to output disassembly.
# perf script -s scripts/python/arm-cs-trace-disasm.py -- -d llvm-objdump-11 -k ./vmlinux
ARM CoreSight Trace Data Assembler Dump
ffff800008eb3198 <etm4_enable_hw>:
ffff800008eb3310: c0 38 00 35 cbnz w0, 0xffff800008eb3a28 <etm4_enable_hw+0x890>
ffff800008eb3314: 9f 3f 03 d5 dsb sy
ffff800008eb3318: df 3f 03 d5 isb
ffff800008eb331c: f5 5b 42 a9 ldp x21, x22, [sp, #32]
ffff800008eb3320: fb 73 45 a9 ldp x27, x28, [sp, #80]
ffff800008eb3324: e0 82 40 39 ldrb w0, [x23, #32]
ffff800008eb3328: 60 00 00 34 cbz w0, 0xffff800008eb3334 <etm4_enable_hw+0x19c>
ffff800008eb332c: e0 03 19 aa mov x0, x25
ffff800008eb3330: 8c fe ff 97 bl 0xffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>
main 6728/6728 [0004] 0.000000000 etm4_enable_hw+0x198 [kernel.kallsyms]
ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>:
ffff800008eb2d60: 1f 20 03 d5 nop
ffff800008eb2d64: 1f 20 03 d5 nop
ffff800008eb2d68: 3f 23 03 d5 hint #25
ffff800008eb2d6c: 00 00 40 f9 ldr x0, [x0]
ffff800008eb2d70: 9f 3f 03 d5 dsb sy
ffff800008eb2d74: 00 c0 3e 91 add x0, x0, #4016
ffff800008eb2d78: 1f 00 00 b9 str wzr, [x0]
ffff800008eb2d7c: bf 23 03 d5 hint #29
ffff800008eb2d80: c0 03 5f d6 ret
main 6728/6728 [0004] 0.000000000 etm4_cs_lock.isra.0.part.0+0x20
# perf script -s scripts/python/arm-cs-trace-disasm.py -- -d objdump -k ./vmlinux
ARM CoreSight Trace Data Assembler Dump
ffff800008eb3310 <etm4_enable_hw+0x178>:
ffff800008eb3310: 350038c0 cbnz w0, ffff800008eb3a28 <etm4_enable_hw+0x890>
ffff800008eb3314: d5033f9f dsb sy
ffff800008eb3318: d5033fdf isb
ffff800008eb331c: a9425bf5 ldp x21, x22, [sp, #32]
ffff800008eb3320: a94573fb ldp x27, x28, [sp, #80]
ffff800008eb3324: 394082e0 ldrb w0, [x23, #32]
ffff800008eb3328: 34000060 cbz w0, ffff800008eb3334 <etm4_enable_hw+0x19c>
ffff800008eb332c: aa1903e0 mov x0, x25
ffff800008eb3330: 97fffe8c bl ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>
main 6728/6728 [0004] 0.000000000 etm4_enable_hw+0x198 [kernel.kallsyms]
ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>:
ffff800008eb2d60: d503201f nop
ffff800008eb2d64: d503201f nop
ffff800008eb2d68: d503233f paciasp
ffff800008eb2d6c: f9400000 ldr x0, [x0]
ffff800008eb2d70: d5033f9f dsb sy
ffff800008eb2d74: 913ec000 add x0, x0, #0xfb0
ffff800008eb2d78: b900001f str wzr, [x0]
ffff800008eb2d7c: d50323bf autiasp
ffff800008eb2d80: d65f03c0 ret
main 6728/6728 [0004] 0.000000000 etm4_cs_lock.isra.0.part.0+0x20
Signed-off-by: Leo Yan <[email protected]>
Co-authored-by: Al Grant <[email protected]>
Co-authored-by: Mathieu Poirier <[email protected]>
Co-authored-by: Tor Jeremiassen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Eelco Chaudron <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Tanmay Jagdale <[email protected]>
Cc: [email protected]
Cc: zengshun . wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
marcan
pushed a commit
that referenced
this issue
Oct 24, 2022
UBSAN complains about array-index-out-of-bounds: [ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41 [ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]' [ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu [ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010 [ 1.980718] kernel: Call Trace: [ 1.980721] kernel: <TASK> [ 1.980723] kernel: show_stack+0x52/0x58 [ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f [ 1.980734] kernel: dump_stack+0x10/0x12 [ 1.980736] kernel: ubsan_epilogue+0x9/0x45 [ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci] [ 1.980748] kernel: ata_qc_issue+0x135/0x240 [ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580 [ 1.980754] kernel: ? vprintk_default+0x1d/0x20 [ 1.980759] kernel: ata_exec_internal+0x67/0xa0 [ 1.980762] kernel: sata_pmp_read+0x8d/0xc0 [ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90 [ 1.980768] kernel: sata_pmp_attach+0x8b/0x310 [ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0 [ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30 [ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci] [ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci] [ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci] [ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0 [ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560 [ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40 [ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci] [ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600 [ 1.980810] kernel: ata_scsi_error+0x9c/0xd0 [ 1.980813] kernel: scsi_error_handler+0xa1/0x180 [ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0 [ 1.980820] kernel: kthread+0x12a/0x150 [ 1.980823] kernel: ? set_kthread_struct+0x50/0x50 [ 1.980826] kernel: ret_from_fork+0x22/0x30 [ 1.980831] kernel: </TASK> This happens because sata_pmp_init_links() initialize link->pmp up to SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array. I can't find the maximum Enclosure Management ports specified in AHCI spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier Information" can utilize 4 bits, which implies it can support up to 16 ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the issue. BugLink: https://bugs.launchpad.net/bugs/1970074 Cc: [email protected] Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
marcan
pushed a commit
that referenced
this issue
Nov 1, 2022
…der memory pressure When destroying a queue, when calling sock_release, the network stack might need to allocate an skb to send a FIN/RST. When that happens during memory pressure, there is a need to reclaim memory, which in turn may ask the nvme-tcp device to write out dirty pages, however this is not possible due to a ctrl teardown that is going on. Set PF_MEMALLOC to the task that releases the socket to grant access to PF_MEMALLOC reserves. In addition, do the same for the nvme-tcp thread as this may also originate from the swap itself and should be more resilient to memory pressure situations. This fixes the following lockdep complaint: -- ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc2+ #25 Tainted: G W ------------------------------------------------------ kswapd0/92 is trying to acquire lock: ffff888114003240 (sk_lock-AF_INET-NVME){+.+.}-{0:0}, at: tcp_sendpage+0x23/0xa0 but task is already holding lock: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x11e/0x160 kmem_cache_alloc_node+0x44/0x530 __alloc_skb+0x158/0x230 tcp_send_active_reset+0x7e/0x730 tcp_disconnect+0x1272/0x1ae0 __tcp_close+0x707/0xd90 tcp_close+0x26/0x80 inet_release+0xfa/0x220 sock_release+0x85/0x1a0 nvme_tcp_free_queue+0x1fd/0x470 [nvme_tcp] nvme_do_delete_ctrl+0x130/0x13d [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x356/0x530 vfs_write+0x4e8/0xce0 ksys_write+0xfd/0x1d0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_INET-NVME){+.+.}-{0:0}: __lock_acquire+0x2a0c/0x5690 lock_acquire+0x18e/0x4f0 lock_sock_nested+0x37/0xc0 tcp_sendpage+0x23/0xa0 inet_sendpage+0xad/0x120 kernel_sendpage+0x156/0x440 nvme_tcp_try_send+0x48a/0x2630 [nvme_tcp] nvme_tcp_queue_rq+0xefb/0x17e0 [nvme_tcp] __blk_mq_try_issue_directly+0x452/0x660 blk_mq_plug_issue_direct.constprop.0+0x207/0x700 blk_mq_flush_plug_list+0x6f5/0xc70 __blk_flush_plug+0x264/0x410 blk_finish_plug+0x4b/0xa0 shrink_lruvec+0x1263/0x1ea0 shrink_node+0x736/0x1a80 balance_pgdat+0x740/0x10d0 kswapd+0x5f2/0xaf0 kthread+0x256/0x2f0 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); *** DEADLOCK *** 3 locks held by kswapd0/92: #0: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 #1: ffff88811f21b0b0 (q->srcu){....}-{0:0}, at: blk_mq_flush_plug_list+0x6b3/0xc70 #2: ffff888170b11470 (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0xeb9/0x17e0 [nvme_tcp] Fixes: 3f2304f ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Tested-by: Daniel Wagner <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
marcan
pushed a commit
that referenced
this issue
Nov 1, 2022
`hostname` needs to be set as null-pointer after free in
`cifs_put_tcp_session` function, or when `cifsd` thread attempts
to resolve hostname and reconnect the host, the thread would deref
the invalid pointer.
Here is one of practical backtrace examples as reference:
Task 477
---------------------------
do_mount
path_mount
do_new_mount
vfs_get_tree
smb3_get_tree
smb3_get_tree_common
cifs_smb3_do_mount
cifs_mount
mount_put_conns
cifs_put_tcp_session
--> kfree(server->hostname)
cifsd
---------------------------
kthread
cifs_demultiplex_thread
cifs_reconnect
reconn_set_ipaddr_from_hostname
--> if (!server->hostname)
--> if (server->hostname[0] == '\0') // !! UAF fault here
CIFS: VFS: cifs_mount failed w/return code = -112
mount error(112): Host is down
BUG: KASAN: use-after-free in reconn_set_ipaddr_from_hostname+0x2ba/0x310
Read of size 1 at addr ffff888108f35380 by task cifsd/480
CPU: 2 PID: 480 Comm: cifsd Not tainted 6.1.0-rc2-00106-gf705792f89dd-dirty #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0x85
print_report+0x16c/0x4a3
kasan_report+0x95/0x190
reconn_set_ipaddr_from_hostname+0x2ba/0x310
__cifs_reconnect.part.0+0x241/0x800
cifs_reconnect+0x65f/0xb60
cifs_demultiplex_thread+0x1570/0x2570
kthread+0x2c5/0x380
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7e/0x90
__kmalloc_node_track_caller+0x52/0x1b0
kstrdup+0x3b/0x70
cifs_get_tcp_session+0xbc/0x19b0
mount_get_conns+0xa9/0x10c0
cifs_mount+0xdf/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x10a/0x190
__kmem_cache_free+0xca/0x3f0
cifs_put_tcp_session+0x30c/0x450
cifs_mount+0xf95/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff888108f35380
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 0 bytes inside of
16-byte region [ffff888108f35380, ffff888108f35390)
The buggy address belongs to the physical page:
page:00000000333f8e58 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888108f350e0 pfn:0x108f35
flags: 0x200000000000200(slab|node=0|zone=2)
raw: 0200000000000200 0000000000000000 dead000000000122 ffff8881000423c0
raw: ffff888108f350e0 000000008080007a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888108f35280: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
ffff888108f35300: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
>ffff888108f35380: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
^
ffff888108f35400: fa fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888108f35480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 7be3248 ("cifs: To match file servers, make sure the server hostname matches")
Signed-off-by: Zeng Heng <[email protected]>
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
marcan
pushed a commit
that referenced
this issue
Jul 14, 2023
Sebastian reports that commit 1c913a1 ("KVM: arm64: Iterate arm_pmus list to probe for default PMU") introduced the following splat with CONFIG_DEBUG_PREEMPT enabled: [70506.110187] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-aar/3078242 [70506.119077] caller is debug_smp_processor_id+0x20/0x30 [70506.124229] CPU: 129 PID: 3078242 Comm: qemu-system-aar Tainted: G W 6.4.0-rc5 #25 [70506.133176] Hardware name: GIGABYTE R181-T92-00/MT91-FS4-00, BIOS F34 08/13/2020 [70506.140559] Call trace: [70506.142993] dump_backtrace+0xa4/0x130 [70506.146737] show_stack+0x20/0x38 [70506.150040] dump_stack_lvl+0x48/0x60 [70506.153704] dump_stack+0x18/0x28 [70506.157007] check_preemption_disabled+0xe4/0x108 [70506.161701] debug_smp_processor_id+0x20/0x30 [70506.166046] kvm_arm_pmu_v3_set_attr+0x460/0x628 [70506.170662] kvm_arm_vcpu_arch_set_attr+0x88/0xd8 [70506.175363] kvm_arch_vcpu_ioctl+0x258/0x4a8 [70506.179632] kvm_vcpu_ioctl+0x32c/0x6b8 [70506.183465] __arm64_sys_ioctl+0xb4/0x100 [70506.187467] invoke_syscall+0x78/0x108 [70506.191205] el0_svc_common.constprop.0+0x4c/0x100 [70506.195984] do_el0_svc+0x34/0x50 [70506.199287] el0_svc+0x34/0x108 [70506.202416] el0t_64_sync_handler+0xf4/0x120 [70506.206674] el0t_64_sync+0x194/0x198 Fix the issue by using the raw variant that bypasses the debug assertion. While at it, stick all of the nuance and UAPI baggage into a comment for posterity. Fixes: 1c913a1 ("KVM: arm64: Iterate arm_pmus list to probe for default PMU") Reported-by: Sebastian Ott <[email protected]> Signed-off-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
jannau
pushed a commit
that referenced
this issue
May 22, 2024
[ Upstream commit fc1092f ] KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 Fixes: 99e5aca ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()") Reported-by: syzkaller <[email protected]> Signed-off-by: Shigeru Yoshida <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jannau
pushed a commit
that referenced
this issue
Jun 28, 2024
[ Upstream commit 431315a ] When the rcutorture tests start to exit, the rcu_torture_cleanup() is invoked to stop kthreads and release resources, if the stall-task kthreads exist, cpu-stall has started and the rcutorture.stall_cpu is set to a larger value, the rcu_torture_cleanup() will be blocked for a long time and the hung-task may occur, this commit therefore add kthread_should_stop() to the loop of cpu-stall operation, when rcutorture tests ends, no need to wait for cpu-stall to end, exit directly. Use the following command to test: insmod rcutorture.ko torture_type=srcu fwd_progress=0 stat_interval=4 stall_cpu_block=1 stall_cpu=200 stall_cpu_holdoff=10 read_exit_burst=0 object_debug=1 rmmod rcutorture [15361.918610] INFO: task rmmod:878 blocked for more than 122 seconds. [15361.918613] Tainted: G W 6.8.0-rc2-yoctodev-standard+ #25 [15361.918615] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [15361.918616] task:rmmod state:D stack:0 pid:878 tgid:878 ppid:773 flags:0x00004002 [15361.918621] Call Trace: [15361.918623] <TASK> [15361.918626] __schedule+0xc0d/0x28f0 [15361.918631] ? __pfx___schedule+0x10/0x10 [15361.918635] ? rcu_is_watching+0x19/0xb0 [15361.918638] ? schedule+0x1f6/0x290 [15361.918642] ? __pfx_lock_release+0x10/0x10 [15361.918645] ? schedule+0xc9/0x290 [15361.918648] ? schedule+0xc9/0x290 [15361.918653] ? trace_preempt_off+0x54/0x100 [15361.918657] ? schedule+0xc9/0x290 [15361.918661] schedule+0xd0/0x290 [15361.918665] schedule_timeout+0x56d/0x7d0 [15361.918669] ? debug_smp_processor_id+0x1b/0x30 [15361.918672] ? rcu_is_watching+0x19/0xb0 [15361.918676] ? __pfx_schedule_timeout+0x10/0x10 [15361.918679] ? debug_smp_processor_id+0x1b/0x30 [15361.918683] ? rcu_is_watching+0x19/0xb0 [15361.918686] ? wait_for_completion+0x179/0x4c0 [15361.918690] ? __pfx_lock_release+0x10/0x10 [15361.918693] ? __kasan_check_write+0x18/0x20 [15361.918696] ? wait_for_completion+0x9d/0x4c0 [15361.918700] ? _raw_spin_unlock_irq+0x36/0x50 [15361.918703] ? wait_for_completion+0x179/0x4c0 [15361.918707] ? _raw_spin_unlock_irq+0x36/0x50 [15361.918710] ? wait_for_completion+0x179/0x4c0 [15361.918714] ? trace_preempt_on+0x54/0x100 [15361.918718] ? wait_for_completion+0x179/0x4c0 [15361.918723] wait_for_completion+0x181/0x4c0 [15361.918728] ? __pfx_wait_for_completion+0x10/0x10 [15361.918738] kthread_stop+0x152/0x470 [15361.918742] _torture_stop_kthread+0x44/0xc0 [torture 7af7f9cbba28271a10503b653f9e05d518fbc8c3] [15361.918752] rcu_torture_cleanup+0x2ac/0xe90 [rcutorture f2cb1f556ee7956270927183c4c2c7749a336529] [15361.918766] ? __pfx_rcu_torture_cleanup+0x10/0x10 [rcutorture f2cb1f556ee7956270927183c4c2c7749a336529] [15361.918777] ? __kasan_check_write+0x18/0x20 [15361.918781] ? __mutex_unlock_slowpath+0x17c/0x670 [15361.918789] ? __might_fault+0xcd/0x180 [15361.918793] ? find_module_all+0x104/0x1d0 [15361.918799] __x64_sys_delete_module+0x2a4/0x3f0 [15361.918803] ? __pfx___x64_sys_delete_module+0x10/0x10 [15361.918807] ? syscall_exit_to_user_mode+0x149/0x280 Signed-off-by: Zqiang <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Uladzislau Rezki (Sony) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jannau
pushed a commit
that referenced
this issue
Jul 6, 2024
[ Upstream commit e3f02f3 ] Currently, the ionic_run_xdp() doesn't handle multi-buffer packets properly for XDP_TX and XDP_REDIRECT. When a jumbo frame is received, the ionic_run_xdp() first makes xdp frame with all necessary pages in the rx descriptor. And if the action is either XDP_TX or XDP_REDIRECT, it should unmap dma-mapping and reset page pointer to NULL for all pages, not only the first page. But it doesn't for SG pages. So, SG pages unexpectedly will be reused. It eventually causes kernel panic. Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25 RIP: 0010:xdp_return_frame+0x42/0x90 Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0 RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202 RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001 RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49 RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000 R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010 R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0 FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x251/0x2f0 ? asm_exc_general_protection+0x22/0x30 ? xdp_return_frame+0x42/0x90 ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] __napi_poll.constprop.0+0x29/0x1b0 net_rx_action+0x2c4/0x350 handle_softirqs+0xf4/0x320 irq_exit_rcu+0x78/0xa0 common_interrupt+0x77/0x90 Fixes: 5377805 ("ionic: implement xdp frags support") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jannau
pushed a commit
that referenced
this issue
Jul 29, 2024
Currently, the ionic_run_xdp() doesn't handle multi-buffer packets properly for XDP_TX and XDP_REDIRECT. When a jumbo frame is received, the ionic_run_xdp() first makes xdp frame with all necessary pages in the rx descriptor. And if the action is either XDP_TX or XDP_REDIRECT, it should unmap dma-mapping and reset page pointer to NULL for all pages, not only the first page. But it doesn't for SG pages. So, SG pages unexpectedly will be reused. It eventually causes kernel panic. Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25 RIP: 0010:xdp_return_frame+0x42/0x90 Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0 RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202 RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001 RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49 RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000 R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010 R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0 FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x251/0x2f0 ? asm_exc_general_protection+0x22/0x30 ? xdp_return_frame+0x42/0x90 ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] __napi_poll.constprop.0+0x29/0x1b0 net_rx_action+0x2c4/0x350 handle_softirqs+0xf4/0x320 irq_exit_rcu+0x78/0xa0 common_interrupt+0x77/0x90 Fixes: 5377805 ("ionic: implement xdp frags support") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
jannau
pushed a commit
that referenced
this issue
Aug 4, 2024
[ Upstream commit 54fcc61 ] When there is a misconfiguration of input state slow path KASAN report error. Fix this error. west login: [ 52.987278] eth1: renamed from veth11 [ 53.078814] eth1: renamed from veth21 [ 53.181355] eth1: renamed from veth31 [ 54.921702] ================================================================== [ 54.922602] BUG: KASAN: wild-memory-access in xfrmi_rcv_cb+0x2d/0x295 [ 54.923393] Read of size 8 at addr 6b6b6b6b00000000 by task ping/512 [ 54.924169] [ 54.924386] CPU: 0 PID: 512 Comm: ping Not tainted 6.9.0-08574-gcd29a4313a1b #25 [ 54.925290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 54.926401] Call Trace: [ 54.926731] <IRQ> [ 54.927009] dump_stack_lvl+0x2a/0x3b [ 54.927478] kasan_report+0x84/0xa6 [ 54.927930] ? xfrmi_rcv_cb+0x2d/0x295 [ 54.928410] xfrmi_rcv_cb+0x2d/0x295 [ 54.928872] ? xfrm4_rcv_cb+0x3d/0x5e [ 54.929354] xfrm4_rcv_cb+0x46/0x5e [ 54.929804] xfrm_rcv_cb+0x7e/0xa1 [ 54.930240] xfrm_input+0x1b3a/0x1b96 [ 54.930715] ? xfrm_offload+0x41/0x41 [ 54.931182] ? raw_rcv+0x292/0x292 [ 54.931617] ? nf_conntrack_confirm+0xa2/0xa2 [ 54.932158] ? skb_sec_path+0xd/0x3f [ 54.932610] ? xfrmi_input+0x90/0xce [ 54.933066] xfrm4_esp_rcv+0x33/0x54 [ 54.933521] ip_protocol_deliver_rcu+0xd7/0x1b2 [ 54.934089] ip_local_deliver_finish+0x110/0x120 [ 54.934659] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.935248] NF_HOOK.constprop.0+0xf8/0x138 [ 54.935767] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.936317] ? secure_tcpv6_ts_off+0x23/0x168 [ 54.936859] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.937454] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.938135] NF_HOOK.constprop.0+0xf8/0x138 [ 54.938663] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.939220] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.939904] ? ip_local_deliver_finish+0x120/0x120 [ 54.940497] __netif_receive_skb_one_core+0xc9/0x107 [ 54.941121] ? __netif_receive_skb_list_core+0x1c2/0x1c2 [ 54.941771] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9 [ 54.942413] ? blk_mq_start_stopped_hw_queue+0x38/0x38 [ 54.943044] ? virtqueue_get_buf_ctx+0x295/0x46b [ 54.943618] process_backlog+0xb3/0x187 [ 54.944102] __napi_poll.constprop.0+0x57/0x1a7 [ 54.944669] net_rx_action+0x1cb/0x380 [ 54.945150] ? __napi_poll.constprop.0+0x1a7/0x1a7 [ 54.945744] ? vring_new_virtqueue+0x17a/0x17a [ 54.946300] ? note_interrupt+0x2cd/0x367 [ 54.946805] handle_softirqs+0x13c/0x2c9 [ 54.947300] do_softirq+0x5f/0x7d [ 54.947727] </IRQ> [ 54.948014] <TASK> [ 54.948300] __local_bh_enable_ip+0x48/0x62 [ 54.948832] __neigh_event_send+0x3fd/0x4ca [ 54.949361] neigh_resolve_output+0x1e/0x210 [ 54.949896] ip_finish_output2+0x4bf/0x4f0 [ 54.950410] ? __ip_finish_output+0x171/0x1b8 [ 54.950956] ip_send_skb+0x25/0x57 [ 54.951390] raw_sendmsg+0xf95/0x10c0 [ 54.951850] ? check_new_pages+0x45/0x71 [ 54.952343] ? raw_hash_sk+0x21b/0x21b [ 54.952815] ? kernel_init_pages+0x42/0x51 [ 54.953337] ? prep_new_page+0x44/0x51 [ 54.953811] ? get_page_from_freelist+0x72b/0x915 [ 54.954390] ? signal_pending_state+0x77/0x77 [ 54.954936] ? preempt_count_sub+0x14/0xb3 [ 54.955450] ? __might_resched+0x8a/0x240 [ 54.955951] ? __might_sleep+0x25/0xa0 [ 54.956424] ? first_zones_zonelist+0x2c/0x43 [ 54.956977] ? __rcu_read_lock+0x2d/0x3a [ 54.957476] ? __pte_offset_map+0x32/0xa4 [ 54.957980] ? __might_resched+0x8a/0x240 [ 54.958483] ? __might_sleep+0x25/0xa0 [ 54.958963] ? inet_send_prepare+0x54/0x54 [ 54.959478] ? sock_sendmsg_nosec+0x42/0x6c [ 54.960000] sock_sendmsg_nosec+0x42/0x6c [ 54.960502] __sys_sendto+0x15d/0x1cc [ 54.960966] ? __x64_sys_getpeername+0x44/0x44 [ 54.961522] ? __handle_mm_fault+0x679/0xae4 [ 54.962068] ? find_vma+0x6b/0x8b [ 54.962497] ? find_vma_intersection+0x8a/0x8a [ 54.963052] ? handle_mm_fault+0x38/0x154 [ 54.963556] ? handle_mm_fault+0xeb/0x154 [ 54.964059] ? preempt_latency_start+0x29/0x34 [ 54.964613] ? preempt_count_sub+0x14/0xb3 [ 54.965141] ? up_read+0x4b/0x5c [ 54.965557] __x64_sys_sendto+0x76/0x82 [ 54.966041] do_syscall_64+0x69/0xd5 [ 54.966497] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 54.967119] RIP: 0033:0x7f2d2fec9a73 [ 54.967572] Code: 8b 15 a9 83 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 80 3d 71 0b 0d 00 00 41 89 ca 74 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 55 48 83 ec 30 44 89 4c 24 [ 54.969747] RSP: 002b:00007ffe85756418 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 54.970655] RAX: ffffffffffffffda RBX: 0000558bebad1340 RCX: 00007f2d2fec9a73 [ 54.971511] RDX: 0000000000000040 RSI: 0000558bebad73c0 RDI: 0000000000000003 [ 54.972366] RBP: 0000558bebad73c0 R08: 0000558bebad35c0 R09: 0000000000000010 [ 54.973234] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000040 [ 54.974091] R13: 00007ffe85757b00 R14: 0000001d00000001 R15: 0000558bebad4680 [ 54.974951] </TASK> [ 54.975244] ================================================================== [ 54.976133] Disabling lock debugging due to kernel taint [ 54.976784] Oops: stack segment: 0000 [#1] PREEMPT DEBUG_PAGEALLOC KASAN [ 54.977603] CPU: 0 PID: 512 Comm: ping Tainted: G B 6.9.0-08574-gcd29a4313a1b #25 [ 54.978654] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 54.979750] RIP: 0010:xfrmi_rcv_cb+0x2d/0x295 [ 54.980293] Code: 00 00 41 57 41 56 41 89 f6 41 55 41 54 55 53 48 89 fb 51 85 f6 75 31 48 89 df e8 d7 e8 ff ff 48 89 c5 48 89 c7 e8 8b a4 4f ff <48> 8b 7d 00 48 89 ee e8 eb f3 ff ff 49 89 c5 b8 01 00 00 00 4d 85 [ 54.982462] RSP: 0018:ffffc90000007990 EFLAGS: 00010282 [ 54.983099] RAX: 0000000000000001 RBX: ffff8881126e9900 RCX: fffffbfff07b77cd [ 54.983948] RDX: fffffbfff07b77cd RSI: fffffbfff07b77cd RDI: ffffffff83dbbe60 [ 54.984794] RBP: 6b6b6b6b00000000 R08: 0000000000000008 R09: 0000000000000001 [ 54.985647] R10: ffffffff83dbbe67 R11: fffffbfff07b77cc R12: 00000000ffffffff [ 54.986512] R13: 00000000ffffffff R14: 00000000ffffffff R15: 0000000000000002 [ 54.987365] FS: 00007f2d2fc0dc40(0000) GS:ffffffff82eb2000(0000) knlGS:0000000000000000 [ 54.988329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.989026] CR2: 00007ffe85755ff8 CR3: 0000000109941000 CR4: 0000000000350ef0 [ 54.989897] Call Trace: [ 54.990223] <IRQ> [ 54.990500] ? __die_body+0x1a/0x56 [ 54.990950] ? die+0x30/0x49 [ 54.991326] ? do_trap+0x9b/0x132 [ 54.991751] ? do_error_trap+0x7d/0xaf [ 54.992223] ? exc_stack_segment+0x35/0x45 [ 54.992734] ? asm_exc_stack_segment+0x22/0x30 [ 54.993294] ? xfrmi_rcv_cb+0x2d/0x295 [ 54.993764] ? xfrm4_rcv_cb+0x3d/0x5e [ 54.994228] xfrm4_rcv_cb+0x46/0x5e [ 54.994670] xfrm_rcv_cb+0x7e/0xa1 [ 54.995106] xfrm_input+0x1b3a/0x1b96 [ 54.995572] ? xfrm_offload+0x41/0x41 [ 54.996038] ? raw_rcv+0x292/0x292 [ 54.996472] ? nf_conntrack_confirm+0xa2/0xa2 [ 54.997011] ? skb_sec_path+0xd/0x3f [ 54.997466] ? xfrmi_input+0x90/0xce [ 54.997925] xfrm4_esp_rcv+0x33/0x54 [ 54.998378] ip_protocol_deliver_rcu+0xd7/0x1b2 [ 54.998944] ip_local_deliver_finish+0x110/0x120 [ 54.999520] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 55.000111] NF_HOOK.constprop.0+0xf8/0x138 [ 55.000630] ? ip_sublist_rcv_finish+0x68/0x68 [ 55.001195] ? secure_tcpv6_ts_off+0x23/0x168 [ 55.001743] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 55.002331] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 55.003008] NF_HOOK.constprop.0+0xf8/0x138 [ 55.003527] ? ip_sublist_rcv_finish+0x68/0x68 [ 55.004078] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 55.004755] ? ip_local_deliver_finish+0x120/0x120 [ 55.005351] __netif_receive_skb_one_core+0xc9/0x107 [ 55.005972] ? __netif_receive_skb_list_core+0x1c2/0x1c2 [ 55.006626] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9 [ 55.007266] ? blk_mq_start_stopped_hw_queue+0x38/0x38 [ 55.007899] ? virtqueue_get_buf_ctx+0x295/0x46b [ 55.008476] process_backlog+0xb3/0x187 [ 55.008961] __napi_poll.constprop.0+0x57/0x1a7 [ 55.009540] net_rx_action+0x1cb/0x380 [ 55.010020] ? __napi_poll.constprop.0+0x1a7/0x1a7 [ 55.010610] ? vring_new_virtqueue+0x17a/0x17a [ 55.011173] ? note_interrupt+0x2cd/0x367 [ 55.011675] handle_softirqs+0x13c/0x2c9 [ 55.012169] do_softirq+0x5f/0x7d [ 55.012597] </IRQ> [ 55.012882] <TASK> [ 55.013179] __local_bh_enable_ip+0x48/0x62 [ 55.013704] __neigh_event_send+0x3fd/0x4ca [ 55.014227] neigh_resolve_output+0x1e/0x210 [ 55.014761] ip_finish_output2+0x4bf/0x4f0 [ 55.015278] ? __ip_finish_output+0x171/0x1b8 [ 55.015823] ip_send_skb+0x25/0x57 [ 55.016261] raw_sendmsg+0xf95/0x10c0 [ 55.016729] ? check_new_pages+0x45/0x71 [ 55.017229] ? raw_hash_sk+0x21b/0x21b [ 55.017708] ? kernel_init_pages+0x42/0x51 [ 55.018225] ? prep_new_page+0x44/0x51 [ 55.018704] ? get_page_from_freelist+0x72b/0x915 [ 55.019292] ? signal_pending_state+0x77/0x77 [ 55.019840] ? preempt_count_sub+0x14/0xb3 [ 55.020357] ? __might_resched+0x8a/0x240 [ 55.020860] ? __might_sleep+0x25/0xa0 [ 55.021345] ? first_zones_zonelist+0x2c/0x43 [ 55.021896] ? __rcu_read_lock+0x2d/0x3a [ 55.022396] ? __pte_offset_map+0x32/0xa4 [ 55.022901] ? __might_resched+0x8a/0x240 [ 55.023404] ? __might_sleep+0x25/0xa0 [ 55.023879] ? inet_send_prepare+0x54/0x54 [ 55.024391] ? sock_sendmsg_nosec+0x42/0x6c [ 55.024918] sock_sendmsg_nosec+0x42/0x6c [ 55.025428] __sys_sendto+0x15d/0x1cc [ 55.025892] ? __x64_sys_getpeername+0x44/0x44 [ 55.026441] ? __handle_mm_fault+0x679/0xae4 [ 55.026988] ? find_vma+0x6b/0x8b [ 55.027414] ? find_vma_intersection+0x8a/0x8a [ 55.027966] ? handle_mm_fault+0x38/0x154 [ 55.028470] ? handle_mm_fault+0xeb/0x154 [ 55.028972] ? preempt_latency_start+0x29/0x34 [ 55.029532] ? preempt_count_sub+0x14/0xb3 [ 55.030047] ? up_read+0x4b/0x5c [ 55.030463] __x64_sys_sendto+0x76/0x82 [ 55.030949] do_syscall_64+0x69/0xd5 [ 55.031406] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 55.032028] RIP: 0033:0x7f2d2fec9a73 [ 55.032481] Code: 8b 15 a9 83 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 80 3d 71 0b 0d 00 00 41 89 ca 74 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 55 48 83 ec 30 44 89 4c 24 [ 55.034660] RSP: 002b:00007ffe85756418 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 55.035567] RAX: ffffffffffffffda RBX: 0000558bebad1340 RCX: 00007f2d2fec9a73 [ 55.036424] RDX: 0000000000000040 RSI: 0000558bebad73c0 RDI: 0000000000000003 [ 55.037293] RBP: 0000558bebad73c0 R08: 0000558bebad35c0 R09: 0000000000000010 [ 55.038153] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000040 [ 55.039012] R13: 00007ffe85757b00 R14: 0000001d00000001 R15: 0000558bebad4680 [ 55.039871] </TASK> [ 55.040167] Modules linked in: [ 55.040585] ---[ end trace 0000000000000000 ]--- [ 55.041164] RIP: 0010:xfrmi_rcv_cb+0x2d/0x295 [ 55.041714] Code: 00 00 41 57 41 56 41 89 f6 41 55 41 54 55 53 48 89 fb 51 85 f6 75 31 48 89 df e8 d7 e8 ff ff 48 89 c5 48 89 c7 e8 8b a4 4f ff <48> 8b 7d 00 48 89 ee e8 eb f3 ff ff 49 89 c5 b8 01 00 00 00 4d 85 [ 55.043889] RSP: 0018:ffffc90000007990 EFLAGS: 00010282 [ 55.044528] RAX: 0000000000000001 RBX: ffff8881126e9900 RCX: fffffbfff07b77cd [ 55.045386] RDX: fffffbfff07b77cd RSI: fffffbfff07b77cd RDI: ffffffff83dbbe60 [ 55.046250] RBP: 6b6b6b6b00000000 R08: 0000000000000008 R09: 0000000000000001 [ 55.047104] R10: ffffffff83dbbe67 R11: fffffbfff07b77cc R12: 00000000ffffffff [ 55.047960] R13: 00000000ffffffff R14: 00000000ffffffff R15: 0000000000000002 [ 55.048820] FS: 00007f2d2fc0dc40(0000) GS:ffffffff82eb2000(0000) knlGS:0000000000000000 [ 55.049805] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 55.050507] CR2: 00007ffe85755ff8 CR3: 0000000109941000 CR4: 0000000000350ef0 [ 55.051366] Kernel panic - not syncing: Fatal exception in interrupt [ 55.052136] Kernel Offset: disabled [ 55.052577] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 304b44f ("xfrm: Add dir validation to "in" data path lookup") Signed-off-by: Antony Antony <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
WhatAmISupposedToPutHere
pushed a commit
to WhatAmISupposedToPutHere/linux
that referenced
this issue
Oct 30, 2024
commit da6ef2d upstream. A dentry leak may be caused when a lookup cookie and a cull are concurrent: P1 | P2 ----------------------------------------------------------- cachefiles_lookup_cookie cachefiles_look_up_object lookup_one_positive_unlocked // get dentry cachefiles_cull inode->i_flags |= S_KERNEL_FILE; cachefiles_open_file cachefiles_mark_inode_in_use __cachefiles_mark_inode_in_use can_use = false if (!(inode->i_flags & S_KERNEL_FILE)) can_use = true return false return false // Returns an error but doesn't put dentry After that the following WARNING will be triggered when the backend folder is umounted: ================================================================== BUG: Dentry 000000008ad87947{i=7a,n=Dx_1_1.img} still in use (1) [unmount of ext4 sda] WARNING: CPU: 4 PID: 359261 at fs/dcache.c:1767 umount_check+0x5d/0x70 CPU: 4 PID: 359261 Comm: umount Not tainted 6.6.0-dirty AsahiLinux#25 RIP: 0010:umount_check+0x5d/0x70 Call Trace: <TASK> d_walk+0xda/0x2b0 do_one_tree+0x20/0x40 shrink_dcache_for_umount+0x2c/0x90 generic_shutdown_super+0x20/0x160 kill_block_super+0x1a/0x40 ext4_kill_sb+0x22/0x40 deactivate_locked_super+0x35/0x80 cleanup_mnt+0x104/0x160 ================================================================== Whether cachefiles_open_file() returns true or false, the reference count obtained by lookup_positive_unlocked() in cachefiles_look_up_object() should be released. Therefore release that reference count in cachefiles_look_up_object() to fix the above issue and simplify the code. Fixes: 1f08c92 ("cachefiles: Implement backing file wrangling") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: David Howells <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
chadmed
pushed a commit
to chadmed/linux
that referenced
this issue
Jan 5, 2025
commit 5954821 upstream. Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop AsahiLinux#25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 9000000006307564 9000000005e666e0 90000001752359b8 [ 56.697936] 9000000008cbe400 900000000804d000 9000000005e666e0 0000000000000000 [ 56.697941] ... [ 56.697944] Call Trace: [ 56.697945] [<90000000066e35c8>] strstr+0x28/0x120 [ 56.697950] [<ffff800004f98a80>] wacom_update_name+0xe0/0x300 [wacom] [ 56.698000] [<ffff800004f9ce58>] wacom_parse_and_register+0x338/0x900 [wacom] [ 56.698050] [<ffff800004f9d74c>] wacom_probe+0x32c/0x420 [wacom] [ 56.698099] [<9000000006307564>] hid_device_probe+0x144/0x260 [ 56.698103] [<9000000005e65d68>] really_probe+0x208/0x540 [ 56.698109] [<9000000005e661dc>] __driver_probe_device+0x13c/0x1e0 [ 56.698112] [<9000000005e66620>] driver_probe_device+0x40/0x100 [ 56.698116] [<9000000005e6680c>] __device_attach_driver+0x12c/0x180 [ 56.698119] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160 [ 56.698123] [<9000000005e66468>] __device_attach+0x108/0x260 [ 56.698126] [<9000000005e63918>] device_reprobe+0x78/0x100 [ 56.698129] [<9000000005e62a68>] bus_for_each_dev+0x88/0x160 [ 56.698132] [<9000000006304e54>] __hid_bus_driver_added+0x34/0x80 [ 56.698134] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160 [ 56.698137] [<9000000006304df0>] __hid_register_driver+0x70/0xa0 [ 56.698142] [<9000000004e10fe4>] do_one_initcall+0x104/0x320 [ 56.698146] [<9000000004f38150>] do_init_module+0x90/0x2c0 [ 56.698151] [<9000000004f3a3d8>] init_module_from_file+0xb8/0x120 [ 56.698155] [<9000000004f3a590>] idempotent_init_module+0x150/0x3a0 [ 56.698159] [<9000000004f3a890>] sys_finit_module+0xb0/0x140 [ 56.698163] [<900000000671e4e8>] do_syscall+0x88/0xc0 [ 56.698166] [<9000000004e12404>] handle_syscall+0xc4/0x160 [ 56.698171] Code: 0011958f 00150224 5800cd85 <2a00022c> 00150004 4000c180 0015022c 03400000 03400000 [ 56.698192] ---[ end trace 0000000000000000 ]--- Fixes: 09dc28a ("HID: wacom: Improve generic name generation") Reported-by: Zhenxing Chen <[email protected]> Co-developed-by: Xu Rao <[email protected]> Signed-off-by: Xu Rao <[email protected]> Signed-off-by: WangYuli <[email protected]> Link: https://patch.msgid.link/[email protected] Cc: [email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
xiaotaiyang@bogon ~ % curl https://alx.sh | sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1049 100 1049 0 0 969 0 0:00:01 0:00:01 --:--:-- 974
Bootstrapping installer:
Checking version...
Version: v0.3.26
Downloading...
xiaotaiyang@bogon ~ %
The text was updated successfully, but these errors were encountered: