Moved to Klipper

I moved over to Klipper so no further updates here.

Marlin 3D Printer Firmware

My configuration of Marlin 2.0.x for the Geeetech A10 with support for TMC2209 and BLTouch.
Check out my other repository about it.

Features

• BLTouch
• TMC2209 UART mode
• Chamber Temperature
• Exhaust Fan

My Cura Start-G-Code:

M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature
M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature
M104 S160; start warming extruder to 160
G28 ; Home all axes
G29 ; Auto bed-level (BL-Touch)
G92 E0 ; Reset Extruder
M104 S{material_print_temperature_layer_0} ; Set Extruder temperature
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
M109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
; End of custom start GCode

My Cura Stop-G-Code:

G91 ;Switch to relative positioning
G1 E-1 ;Retract filament to lower pressure
G0 X0 Y200 ;Move hotend to left and bed forward
M104 S0 ;Cooldown hotend
G90 ;Switch to absolute mode
G92 E0 ;Set extruder to zero
M140 S0 ;Cooldown bed
M84 ; Disable steppers