It did not work on my camera.

[Barbar16]

Hello, I applied what you said, but I was not successful. It did not work on my camera.

Firmware HwV380E31_WF3_IPC60_ETH_20201218

my camera

[Arkady23]

It looks like the situation that the sd card is not formatted like fat32 or exfat. Try to reformat the card into a long one or replace it.

[Barbar16]

I have repeatedly formatted my SD card in both FAT32 and exFAT, but I got the same result each time.

===== quick check result dump =====
devID: 68.............
====== sensor ====>
======version ====>
[app_version]
name=AppV380E31_V1.1.7.2
date=20220728
[kernal_version]
name=KerV380E31_IPC60_ETH_V3.1.1
date=20201218
[hardware_version]
name=HwV380E31_WF3_IPC60_ETH
date=20201218
[base_version]
name=AppV380E31_V1.1.7.2
date=20220728
======cParams ====>
[CONST_PARAM]
ircut_flip=1
color_flip=0
firmware_type=67
network_reset_mode=4
uart2_usage=0
lens_type=2
starlight_mode=0
light_ctrl=0
night_with_color=1
reversal_value=0
ptz_opposite_run=0
ptz_dc_opposite_run=0
irfeed_source=1
resolution=1
force_res_level=0
vframe_encode_type=2
model_id= MVR33305
pano_auto_lens_type=0
oss_factoryid=11000100
standard_mode=1
panoY=540
panoRad=490
pano_crop_X=420
pano_Rad_res=697
pano_Y_res=768
pano_X_res=763
panoX=536
date_production=1684542239
time_zone=800
factory_id=1909170003
pcba_check_enable=0

[FRAME_QUANT_REC]
main_qp_max=43
main_qp_intra=39
main_qp_min=38
sub_qp_max=43
sub_qp_intra=39
sub_qp_min=38

[FRAME_QUANT_MOBILE]
main_qp_max=43
main_qp_intra=39
main_qp_min=38
sub_qp_max=43
sub_qp_intra=39
sub_qp_min=38

[FRAME_QUANT_ONVIF]
main_qp_max=43
main_qp_intra=39
main_qp_min=38
sub_qp_max=43
sub_qp_intra=39
sub_qp_min=38

======usb ====>
Bus 001 Device 002: ID 007a:8888
Bus 001 Device 001: ID 1d6b:0002
======network ====>
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

domain tendawifi.com
nameserver 192.168.1.1
nameserver 8.8.8.8
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface

Thank you for your prompt reply.

[Barbar16]

My SD card is 32GB I apologize, I have no knowledge of coding, and I am trying to learn by reading and experimenting. My IP camera is not useful in its current state without ONVIF support. I cannot use it without ONVIF support.

[Barbar16]

I think I should get myself a new camera. :(

[Arkady23]

I have a thought to double check the paths as described by dotvav here #58 (comment) and I'll try to understand.... maybe there really is something in this.

[Barbar16]

Thank you so much

[Arkady23]

As far as I understand dotvav, the dirname command does not work on his camera except for the tar command. I will remove dirname in the next fix (tomorrow).

[Barbar16]

I'm sorry, I don't know coding, but I wanted to add the error in the picture, hoping it might mean something to you.

Could there be an issue related to the language?
Thank you very much for your interest and attention.

[Arkady23]

Please download yesterday's version::
https://github.com/Arkady23/V380-Web/releases/tag/Initial-installer

[Barbar16]

I tried, but the problem I have is still ongoing. I think I am doing something wrong.

[Arkady23]

This is probably such a camera. We need to deal with her.