controller.reapAllVats() could reset reapCountdown #8665
Assignees
Labels
Comments
|
It might also be useful to change In my ghost-replay testing, I'm doing a cleanup pass before submitting the new operation (so I can tell what DB changes are a result of my injected action, versus GC consequences that were just waiting around for a BOYD), and I've found that I need to make two Making |
|
We might even want this to also trigger a heap snapshot for all vats (which, really, would mean removing the enqueue-BOYD step and just follow the "time to make a heap snapshot" path, since that path also does a BOYD). While testing large GC operations, I'm noticing a significant amount of time being spent replaying a vat which just completed a large BOYD. The unfortunate LRU-thrashing property of
This results in duplicate work, some of which is super-expensive (millions of syscalls, 10 minutes of wallclock). Of course, this would also be handled elegantly by @mhofman 's suggestion to schedule heap snapshots based on computrons, rather than simply counting deliveries. The large BOYD would trigger a snapshot. #6786 We should also change the snapshot trigger to look at (or remember) the last delivery, and refrain from a new BOYD if that was the last thing we did in that vat. |
This makes a lot of sense to me. I don't think we need to rename the operation, we just note that reaping vats that haven't had any activity in them since the last time goes really fast. |
We'd have this weird situation where BOYD triggers a snapshot and snapshot triggers a BOYD, so it seems like it might mainly be a question of which goes first. Perhaps the alternate route is to reframe The other thing that might be worth considering is having the BOYD-them-all logic to somehow be in cahoots with the cache, perhaps by using knowledge of what's currently swapped out vs. what's swapped in to tweak the order of sweeps so they don't interact with the cache so pathologically. I have memories of Alan Karp talking about big numerical calculations at IBM where MRU instead of LRU gave optimal cache benefit. |
Yup I suggested something similar in #8626 (comment), and on slack but using the
As I mention in that issue, I think we should only run BOYD and snapshotting together, triggered by the computrons of previous deliveries. As such the schedule would not count the cost of BOYD and snapshotting towards the interval, but I think that's fine. If anything, a costly BOYD should increase the interval at which you perform it (which could be captured as adding the computron cost of the last BYOD to the "next reap meter" instead of decreasing from it)
I don't understand. If BOYD and snapshotting is an atomic operation, how can that happen?
That doesn't seem right. Snapshotting is conceptually an internal detail of some types of workers, where BOYD is a concept applying to all vats. If anything snapshots should be an implicit effect of BOYD for those workers, and never explicitly performed by the controller. |
warner
added a commit
that referenced
this issue
Mar 29, 2024
`dispatch.bringOutYourDead()`, aka "reap", triggers garbage collection inside a vat, and gives it a chance to drop imported c-list vrefs that are no longer referenced by anything inside the vat. Previously, each vat has a configurable parameter named `reapInterval`, which defaults to a kernel-wide `defaultReapInterval` (but can be set separately for each vat). This defaults to 1, mainly for unit testing, but real applications set it to something like 200. This caused BOYD to happen once every 200 deliveries, plus an extra BOYD just before we save an XS heap-state snapshot. This commit switches to a "dirt"-based BOYD scheduler, wherein we consider the vat to get more and more dirty as it does work, and eventually it reaches a `reapDirtThreshold` that triggers the BOYD (which resets the dirt counter). We continue to track `dirt.deliveries` as before, with the same defaults. But we add a new `dirt.gcKrefs` counter, which is incremented by the krefs we submit to the vat in GC deliveries. For example, calling `dispatch.dropImports([kref1, kref2])` would increase `dirt.gcKrefs` by two. The `reapDirtThreshold.gcKrefs` limit defaults to 20. For normal use patterns, this will trigger a BOYD after ten krefs have been dropped and retired. We choose this value to allow the #8928 slow vat termination process to trigger BOYD frequently enough to keep the BOYD cranks small: since these will be happening constantly (in the "background"), we don't want them to take more than 500ms or so. Given the current size of the large vats that #8928 seeks to terminate, 10 krefs seems like a reasonable limit. And of course we don't want to perform too many BOYDs, so `gcKrefs: 20` is about the smallest threshold we'd want to use. External APIs continue to accept `reapInterval`, and now also accept `reapGCKrefs`. * kernel config record * takes `config.defaultReapInterval` and `defaultReapGCKrefs` * takes `vat.NAME.creationOptions.reapInterval` and `.reapGCKrefs` * `controller.changeKernelOptions()` still takes `defaultReapInterval` but now also accepts `defaultReapGCKrefs` The APIs available to userspace code (through `vatAdminSvc`) are unchanged (partially due to upgrade/backwards-compatibility limitations), and continue to only support setting `reapInterval`. Internally, this just modifies `reapDirtThreshold.deliveries`. * `E(vatAdminSvc).createVat(bcap, { reapInterval })` * `E(adminNode).upgrade(bcap, { reapInterval })` * `E(adminNode).changeOptions({ reapInterval })` Internally, the kernel-wide state records `defaultReapDirtThreshold` instead of `defaultReapInterval`, and each vat records `.reapDirtThreshold` in their `vNN.options` key instead of `vNN.reapInterval`. The current dirt level is recorded in `vNN.reapDirt`. The kernel will automatically upgrade both the kernel-wide and the per-vat state upon the first reboot with the new kernel code. The old `reapCountdown` value is used to initialize the vat's `reapDirt.deliveries` counter, so the upgrade shouldn't disrupt the existing schedule. Vats which used `reapInterval = 'never'` (eg comms) will get a `reapDirtThreshold` of all 'never' values, so they continue to inhibit BOYD. Otherwise, all vats get a `threshold.gcKrefs` of 20. We do not track dirt when the corresponding threshold is 'never', to avoid incrementing the comms dirt counters forever. This design leaves room for adding `.computrons` to the dirt record, as well as tracking a separate `snapshotDirt` counter (to trigger XS heap snapshots, ala #6786). We add `reapDirtThreshold.computrons`, but do not yet expose an API to set it. Future work includes: * upgrade vat-vat-admin to let userspace set `reapDirtThreshold` New tests were added to exercise the upgrade process, and other tests were updated to match the new internal initialization pattern. We now reset the dirt counter upon any BOYD, so this also happens to help with #8665 (doing a `reapAllVats()` resets the delivery counters, so future BOYDs will be delayed, which is what we want). But we should still change `controller.reapAllVats()` to avoid BOYDs on vats which haven't received any deliveries. closes #8980
warner
added a commit
that referenced
this issue
Apr 9, 2024
`dispatch.bringOutYourDead()`, aka "reap", triggers garbage collection inside a vat, and gives it a chance to drop imported c-list vrefs that are no longer referenced by anything inside the vat. Previously, each vat has a configurable parameter named `reapInterval`, which defaults to a kernel-wide `defaultReapInterval` (but can be set separately for each vat). This defaults to 1, mainly for unit testing, but real applications set it to something like 200. This caused BOYD to happen once every 200 deliveries, plus an extra BOYD just before we save an XS heap-state snapshot. This commit switches to a "dirt"-based BOYD scheduler, wherein we consider the vat to get more and more dirty as it does work, and eventually it reaches a `reapDirtThreshold` that triggers the BOYD (which resets the dirt counter). We continue to track `dirt.deliveries` as before, with the same defaults. But we add a new `dirt.gcKrefs` counter, which is incremented by the krefs we submit to the vat in GC deliveries. For example, calling `dispatch.dropImports([kref1, kref2])` would increase `dirt.gcKrefs` by two. The `reapDirtThreshold.gcKrefs` limit defaults to 20. For normal use patterns, this will trigger a BOYD after ten krefs have been dropped and retired. We choose this value to allow the #8928 slow vat termination process to trigger BOYD frequently enough to keep the BOYD cranks small: since these will be happening constantly (in the "background"), we don't want them to take more than 500ms or so. Given the current size of the large vats that #8928 seeks to terminate, 10 krefs seems like a reasonable limit. And of course we don't want to perform too many BOYDs, so `gcKrefs: 20` is about the smallest threshold we'd want to use. External APIs continue to accept `reapInterval`, and now also accept `reapGCKrefs`. * kernel config record * takes `config.defaultReapInterval` and `defaultReapGCKrefs` * takes `vat.NAME.creationOptions.reapInterval` and `.reapGCKrefs` * `controller.changeKernelOptions()` still takes `defaultReapInterval` but now also accepts `defaultReapGCKrefs` The APIs available to userspace code (through `vatAdminSvc`) are unchanged (partially due to upgrade/backwards-compatibility limitations), and continue to only support setting `reapInterval`. Internally, this just modifies `reapDirtThreshold.deliveries`. * `E(vatAdminSvc).createVat(bcap, { reapInterval })` * `E(adminNode).upgrade(bcap, { reapInterval })` * `E(adminNode).changeOptions({ reapInterval })` Internally, the kernel-wide state records `defaultReapDirtThreshold` instead of `defaultReapInterval`, and each vat records `.reapDirtThreshold` in their `vNN.options` key instead of `vNN.reapInterval`. The current dirt level is recorded in `vNN.reapDirt`. The kernel will automatically upgrade both the kernel-wide and the per-vat state upon the first reboot with the new kernel code. The old `reapCountdown` value is used to initialize the vat's `reapDirt.deliveries` counter, so the upgrade shouldn't disrupt the existing schedule. Vats which used `reapInterval = 'never'` (eg comms) will get a `reapDirtThreshold` of all 'never' values, so they continue to inhibit BOYD. Otherwise, all vats get a `threshold.gcKrefs` of 20. We do not track dirt when the corresponding threshold is 'never', to avoid incrementing the comms dirt counters forever. This design leaves room for adding `.computrons` to the dirt record, as well as tracking a separate `snapshotDirt` counter (to trigger XS heap snapshots, ala #6786). We add `reapDirtThreshold.computrons`, but do not yet expose an API to set it. Future work includes: * upgrade vat-vat-admin to let userspace set `reapDirtThreshold` New tests were added to exercise the upgrade process, and other tests were updated to match the new internal initialization pattern. We now reset the dirt counter upon any BOYD, so this also happens to help with #8665 (doing a `reapAllVats()` resets the delivery counters, so future BOYDs will be delayed, which is what we want). But we should still change `controller.reapAllVats()` to avoid BOYDs on vats which haven't received any deliveries. closes #8980
warner
added a commit
that referenced
this issue
Aug 12, 2024
NOTE: deployed kernels require a new `upgradeSwingset()` call upon (at least) first boot after upgrading to this version of the kernel code. See below for details. `dispatch.bringOutYourDead()`, aka "reap", triggers garbage collection inside a vat, and gives it a chance to drop imported c-list vrefs that are no longer referenced by anything inside the vat. Previously, each vat has a configurable parameter named `reapInterval`, which defaults to a kernel-wide `defaultReapInterval` (but can be set separately for each vat). This defaults to 1, mainly for unit testing, but real applications set it to something like 1000. This caused BOYD to happen once every 1000 deliveries, plus an extra BOYD just before we save an XS heap-state snapshot. This commit switches to a "dirt"-based BOYD scheduler, wherein we consider the vat to get more and more dirty as it does work, and eventually it reaches a `reapDirtThreshold` that triggers the BOYD (which resets the dirt counter). We continue to track `dirt.deliveries` as before, with the same defaults. But we add a new `dirt.gcKrefs` counter, which is incremented by the krefs we submit to the vat in GC deliveries. For example, calling `dispatch.dropImports([kref1, kref2])` would increase `dirt.gcKrefs` by two. The `reapDirtThreshold.gcKrefs` limit defaults to 20. For normal use patterns, this will trigger a BOYD after ten krefs have been dropped and retired. We choose this value to allow the #8928 slow vat termination process to trigger BOYD frequently enough to keep the BOYD cranks small: since these will be happening constantly (in the "background"), we don't want them to take more than 500ms or so. Given the current size of the large vats that #8928 seeks to terminate, 10 krefs seems like a reasonable limit. And of course we don't want to perform too many BOYDs, so `gcKrefs: 20` is about the smallest threshold we'd want to use. External APIs continue to accept `reapInterval`, and now also accept `reapGCKrefs`, and `neverReap` (a boolean which inhibits all BOYD, even new forms of dirt added in the future). * kernel config record * takes `config.defaultReapInterval` and `defaultReapGCKrefs` * takes `vat.NAME.creationOptions.reapInterval` and `.reapGCKrefs` and `.neverReap` * `controller.changeKernelOptions()` still takes `defaultReapInterval` but now also accepts `defaultReapGCKrefs` The APIs available to userspace code (through `vatAdminSvc`) are unchanged (partially due to upgrade/backwards-compatibility limitations), and continue to only support setting `reapInterval`. Internally, this just modifies `reapDirtThreshold.deliveries`. * `E(vatAdminSvc).createVat(bcap, { reapInterval })` * `E(adminNode).upgrade(bcap, { reapInterval })` * `E(adminNode).changeOptions({ reapInterval })` Internally, the kernel-wide state records `defaultReapDirtThreshold` instead of `defaultReapInterval`, and each vat records `.reapDirtThreshold` in their `vNN.options` key instead of `vNN.reapInterval`. The vat-level records override the kernel-wide values. The current dirt level is recorded in `vNN.reapDirt`. NOTE: deployed kernels require explicit state upgrade, with: ```js import { upgradeSwingset } from '@agoric/swingset-vat'; .. upgradeSwingset(kernelStorage); ``` This must be called after upgrading to the new kernel code/release, and before calling `buildVatController()`. It is safe to call on every reboot (it will only modify the swingstore when the kernel version has changed). If changes are made, the host application is responsible for commiting them, as well as recording any export-data updates (if the host configured the swingstore with an export-data callback). During this upgrade, the old `reapCountdown` value is used to initialize the vat's `reapDirt.deliveries` counter, so the upgrade shouldn't disrupt the existing schedule. Vats which used `reapInterval = 'never'` (eg comms) will get a `reapDirtThreshold.never = true`, so they continue to inhibit BOYD. Any per-vat settings that match the kernel-wide settings are removed, allowing the kernel values to take precedence (as well as changes to the kernel-wide values; i.e. the per-vat settings are not sticky). We do not track dirt when the corresponding threshold is 'never', or if `neverReap` is true, to avoid incrementing the comms dirt counters forever. This design leaves room for adding `.computrons` to the dirt record, as well as tracking a separate `snapshotDirt` counter (to trigger XS heap snapshots, ala #6786). We add `reapDirtThreshold.computrons`, but do not yet expose an API to set it. Future work includes: * upgrade vat-vat-admin to let userspace set `reapDirtThreshold` New tests were added to exercise the upgrade process, and other tests were updated to match the new internal initialization pattern. We now reset the dirt counter upon any BOYD, so this also happens to help with #8665 (doing a `reapAllVats()` resets the delivery counters, so future BOYDs will be delayed, which is what we want). But we should still change `controller.reapAllVats()` to avoid BOYDs on vats which haven't received any deliveries. closes #8980
mergify bot
added a commit
that referenced
this issue
Aug 12, 2024
fix(swingset): use "dirt" to schedule vat reap/bringOutYourDead NOTE: deployed kernels require a new `upgradeSwingset()` call upon (at least) first boot after upgrading to this version of the kernel code. `dispatch.bringOutYourDead()`, aka "reap", triggers garbage collection inside a vat, and gives it a chance to drop imported c-list vrefs that are no longer referenced by anything inside the vat. Previously, each vat has a configurable parameter named `reapInterval`, which defaults to a kernel-wide `defaultReapInterval` (but can be set separately for each vat). This defaults to 1, mainly for unit testing, but real applications set it to something like 1000. This caused BOYD to happen once every 1000 deliveries, plus an extra BOYD just before we save an XS heap-state snapshot. This commit switches to a "dirt"-based BOYD scheduler, wherein we consider the vat to get more and more dirty as it does work, and eventually it reaches a `reapDirtThreshold` that triggers the BOYD (which resets the dirt counter). We continue to track `dirt.deliveries` as before, with the same defaults. But we add a new `dirt.gcKrefs` counter, which is incremented by the krefs we submit to the vat in GC deliveries. For example, calling `dispatch.dropImports([kref1, kref2])` would increase `dirt.gcKrefs` by two. The `reapDirtThreshold.gcKrefs` limit defaults to 20. For normal use patterns, this will trigger a BOYD after ten krefs have been dropped and retired. We choose this value to allow the #8928 slow vat termination process to trigger BOYD frequently enough to keep the BOYD cranks small: since these will be happening constantly (in the "background"), we don't want them to take more than 500ms or so. Given the current size of the large vats that #8928 seeks to terminate, 10 krefs seems like a reasonable limit. And of course we don't want to perform too many BOYDs, so `gcKrefs: 20` is about the smallest threshold we'd want to use. External APIs continue to accept `reapInterval`, and now also accept `reapGCKrefs`, and `neverReap` (a boolean which inhibits all BOYD, even new forms of dirt added in the future). * kernel config record * takes `config.defaultReapInterval` and `defaultReapGCKrefs` * takes `vat.NAME.creationOptions.reapInterval` and `.reapGCKrefs` and `.neverReap` * `controller.changeKernelOptions()` still takes `defaultReapInterval` but now also accepts `defaultReapGCKrefs` The APIs available to userspace code (through `vatAdminSvc`) are unchanged (partially due to upgrade/backwards-compatibility limitations), and continue to only support setting `reapInterval`. Internally, this just modifies `reapDirtThreshold.deliveries`. * `E(vatAdminSvc).createVat(bcap, { reapInterval })` * `E(adminNode).upgrade(bcap, { reapInterval })` * `E(adminNode).changeOptions({ reapInterval })` Internally, the kernel-wide state records `defaultReapDirtThreshold` instead of `defaultReapInterval`, and each vat records `.reapDirtThreshold` in their `vNN.options` key instead of `vNN.reapInterval`. The vat-level records override the kernel-wide values. The current dirt level is recorded in `vNN.reapDirt`. NOTE: deployed kernels require explicit state upgrade, with: ```js import { upgradeSwingset } from '@agoric/swingset-vat'; .. upgradeSwingset(kernelStorage); ``` This must be called after upgrading to the new kernel code/release, and before calling `buildVatController()`. It is safe to call on every reboot (it will only modify the swingstore when the kernel version has changed). If changes are made, the host application is responsible for commiting them, as well as recording any export-data updates (if the host configured the swingstore with an export-data callback). During this upgrade, the old `reapCountdown` value is used to initialize the vat's `reapDirt.deliveries` counter, so the upgrade shouldn't disrupt the existing schedule. Vats which used `reapInterval = 'never'` (eg comms) will get a `reapDirtThreshold.never = true`, so they continue to inhibit BOYD. Any per-vat settings that match the kernel-wide settings are removed, allowing the kernel values to take precedence (as well as changes to the kernel-wide values; i.e. the per-vat settings are not sticky). We do not track dirt when the corresponding threshold is 'never', or if `neverReap` is true, to avoid incrementing the comms dirt counters forever. This design leaves room for adding `.computrons` to the dirt record, as well as tracking a separate `snapshotDirt` counter (to trigger XS heap snapshots, ala #6786). We add `reapDirtThreshold.computrons`, but do not yet expose an API to set it. Future work includes: * upgrade vat-vat-admin to let userspace set `reapDirtThreshold` New tests were added to exercise the upgrade process, and other tests were updated to match the new internal initialization pattern. We now reset the dirt counter upon any BOYD, so this also happens to help with #8665 (doing a `reapAllVats()` resets the delivery counters, so future BOYDs will be delayed, which is what we want). But we should still change `controller.reapAllVats()` to avoid BOYDs on vats which haven't received any deliveries. closes #8980
kriskowal
pushed a commit
that referenced
this issue
Aug 27, 2024
NOTE: deployed kernels require a new `upgradeSwingset()` call upon (at least) first boot after upgrading to this version of the kernel code. See below for details. `dispatch.bringOutYourDead()`, aka "reap", triggers garbage collection inside a vat, and gives it a chance to drop imported c-list vrefs that are no longer referenced by anything inside the vat. Previously, each vat has a configurable parameter named `reapInterval`, which defaults to a kernel-wide `defaultReapInterval` (but can be set separately for each vat). This defaults to 1, mainly for unit testing, but real applications set it to something like 1000. This caused BOYD to happen once every 1000 deliveries, plus an extra BOYD just before we save an XS heap-state snapshot. This commit switches to a "dirt"-based BOYD scheduler, wherein we consider the vat to get more and more dirty as it does work, and eventually it reaches a `reapDirtThreshold` that triggers the BOYD (which resets the dirt counter). We continue to track `dirt.deliveries` as before, with the same defaults. But we add a new `dirt.gcKrefs` counter, which is incremented by the krefs we submit to the vat in GC deliveries. For example, calling `dispatch.dropImports([kref1, kref2])` would increase `dirt.gcKrefs` by two. The `reapDirtThreshold.gcKrefs` limit defaults to 20. For normal use patterns, this will trigger a BOYD after ten krefs have been dropped and retired. We choose this value to allow the #8928 slow vat termination process to trigger BOYD frequently enough to keep the BOYD cranks small: since these will be happening constantly (in the "background"), we don't want them to take more than 500ms or so. Given the current size of the large vats that #8928 seeks to terminate, 10 krefs seems like a reasonable limit. And of course we don't want to perform too many BOYDs, so `gcKrefs: 20` is about the smallest threshold we'd want to use. External APIs continue to accept `reapInterval`, and now also accept `reapGCKrefs`, and `neverReap` (a boolean which inhibits all BOYD, even new forms of dirt added in the future). * kernel config record * takes `config.defaultReapInterval` and `defaultReapGCKrefs` * takes `vat.NAME.creationOptions.reapInterval` and `.reapGCKrefs` and `.neverReap` * `controller.changeKernelOptions()` still takes `defaultReapInterval` but now also accepts `defaultReapGCKrefs` The APIs available to userspace code (through `vatAdminSvc`) are unchanged (partially due to upgrade/backwards-compatibility limitations), and continue to only support setting `reapInterval`. Internally, this just modifies `reapDirtThreshold.deliveries`. * `E(vatAdminSvc).createVat(bcap, { reapInterval })` * `E(adminNode).upgrade(bcap, { reapInterval })` * `E(adminNode).changeOptions({ reapInterval })` Internally, the kernel-wide state records `defaultReapDirtThreshold` instead of `defaultReapInterval`, and each vat records `.reapDirtThreshold` in their `vNN.options` key instead of `vNN.reapInterval`. The vat-level records override the kernel-wide values. The current dirt level is recorded in `vNN.reapDirt`. NOTE: deployed kernels require explicit state upgrade, with: ```js import { upgradeSwingset } from '@agoric/swingset-vat'; .. upgradeSwingset(kernelStorage); ``` This must be called after upgrading to the new kernel code/release, and before calling `buildVatController()`. It is safe to call on every reboot (it will only modify the swingstore when the kernel version has changed). If changes are made, the host application is responsible for commiting them, as well as recording any export-data updates (if the host configured the swingstore with an export-data callback). During this upgrade, the old `reapCountdown` value is used to initialize the vat's `reapDirt.deliveries` counter, so the upgrade shouldn't disrupt the existing schedule. Vats which used `reapInterval = 'never'` (eg comms) will get a `reapDirtThreshold.never = true`, so they continue to inhibit BOYD. Any per-vat settings that match the kernel-wide settings are removed, allowing the kernel values to take precedence (as well as changes to the kernel-wide values; i.e. the per-vat settings are not sticky). We do not track dirt when the corresponding threshold is 'never', or if `neverReap` is true, to avoid incrementing the comms dirt counters forever. This design leaves room for adding `.computrons` to the dirt record, as well as tracking a separate `snapshotDirt` counter (to trigger XS heap snapshots, ala #6786). We add `reapDirtThreshold.computrons`, but do not yet expose an API to set it. Future work includes: * upgrade vat-vat-admin to let userspace set `reapDirtThreshold` New tests were added to exercise the upgrade process, and other tests were updated to match the new internal initialization pattern. We now reset the dirt counter upon any BOYD, so this also happens to help with #8665 (doing a `reapAllVats()` resets the delivery counters, so future BOYDs will be delayed, which is what we want). But we should still change `controller.reapAllVats()` to avoid BOYDs on vats which haven't received any deliveries. closes #8980
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
What is the Problem Being Solved?
Vats are normally GCed (
dispatch.bringOutYourDead()) by a per-vat timer namedreapCountdown. This is initialized toreapInterval(set to 1000 on mainnet), and decremented for each delivery to the vat. When it hits zero, a BOYD is performed, and the counter is reset.We recently landed
controller.reapAllVats(), which schedules an immediate (well, at the start of the nextcontroller.run()BOYD to all vats. However this doesn't change the "organic" BOYD timing:reapCountdownis not affected, so the vat will still do the usual BOYD when it hits zero.For purposes of our benchmarks, we'd like to reduce the variation caused by organically-scheduled BOYDs. We can do a
reapAllVats()just before starting the benchmark, and again just afterwards (so the object counts are accurate), but it would be less noisy if we could reduce the frequency of BOYDs in the middle. We should consider configuring the benchmark environment to usedefaultReapInterval: 'never', however it would also make a certain amount of sense ifreapAllVats()were to reset the counters back toreapInterval.(Now I'm on the fence about whether this is a good idea.. using
defaultReapInterval: 'never'seems best, and if we use that, then it doesn't matter whether we reset the counters. But I'll capture the idea for further discussion).Description of the Design
If implemented, we would:
vatKeeper.resetReapCountdown()kernel.reapAllVats()to call resetReapCountdown just after enqueuing the BOYDSecurity Considerations
none
Scaling Considerations
none
Test Plan
Update the unit test to inspect the kvStore after calling
reapAllVats(), to assert that the counters have all been reset.Upgrade Considerations
none
cc @FUDCo
The text was updated successfully, but these errors were encountered: