upstream camss for sc7180/sm7125 #5
Comments
|
ok seemed nobody willing to, so here is the try: |
99degree
added a commit
that referenced
this issue
Jun 22, 2024
SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone. This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces. Since SM7125 is a low-speed variant of SC7180, SC7180 testers please take a look and have a test as well. sc7180 provides - 2 x VFE - 1 x VFE Lite - 2 x CSID - 1 x CSID Lite - 4 x CSI PHY The sc7180-camss binding should be comaptible with sdm845 yaml. I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and put new maintainer information. If this is not desirable then i can add binding to existing sdm845 yaml instead. In addition, a bootable tree of sm7125/joyeuse is availble at: https://github.com/99degree/linux/tree/camss To: Robert Foss <[email protected]> To: Todor Tomov <[email protected]> To: Bryan O'Donoghue <[email protected]> To: Mauro Carvalho Chehab <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: [email protected] To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: George Chan <[email protected]> --- Changes in v2: - Revised dt-binding as stated by krzk - Added dt-binding item power-domain-name as stated by Bryan - Combine patch #2 and #3 as stated by krzk and Bryan - Split eror-print log for clk name from patch #5 as suggested by Konrad - Reformat dt-node of camss as stated by krzk - Corrected phy init sequence for v1.2.2 as spot by Bryan - Link to v1: https://lore.kernel.org/r/[email protected] --- b4-submit-tracking --- # This section is used internally by b4 prep for tracking purposes. { "series": { "revision": 2, "change-id": "20240621-b4-sc7180-camss-cddc6b60a9b4", "prefixes": [], "history": { "v1": [ "[email protected]" ] } } }
99degree
added a commit
that referenced
this issue
Jun 22, 2024
SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone. This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces. Since SM7125 is a low-speed variant of SC7180, SC7180 testers please take a look and have a test as well. sc7180 provides - 2 x VFE - 1 x VFE Lite - 2 x CSID - 1 x CSID Lite - 4 x CSI PHY The sc7180-camss binding should be comaptible with sdm845 yaml. I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and put new maintainer information. If this is not desirable then i can add binding to existing sdm845 yaml instead. In addition, a bootable tree of sm7125/joyeuse is availble at: https://github.com/99degree/linux/tree/camss To: Robert Foss <[email protected]> To: Todor Tomov <[email protected]> To: Bryan O'Donoghue <[email protected]> To: Mauro Carvalho Chehab <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: [email protected] To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: George Chan <[email protected]> --- Changes in v2: - Revised dt-binding as stated by krzk - Added dt-binding item power-domain-name as stated by Bryan - Combine patch #2 and #3 as stated by krzk and Bryan - Split eror-print log for clk name from patch #5 as suggested by Konrad - Reformat dt-node of camss as stated by krzk - Corrected phy init sequence for v1.2.2 as spot by Bryan - Added 3 more debug info for missing clk and low clk-rate issue. - Adding port info to ports sub-node - Adding required-opps node to dt - Link to v1: https://lore.kernel.org/r/[email protected] --- b4-submit-tracking --- # This section is used internally by b4 prep for tracking purposes. { "series": { "revision": 2, "change-id": "20240621-b4-sc7180-camss-cddc6b60a9b4", "prefixes": [], "history": { "v1": [ "[email protected]" ] } } }
99degree
pushed a commit
that referenced
this issue
Jun 23, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
|
v2 is based on linux-next v3 is based on linux-next + https://patchwork.kernel.org/project/linux-arm-msm/list/?series=855082 |
99degree
added a commit
that referenced
this issue
Jun 24, 2024
SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone. This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces. Since SM7125 is a low-speed variant of SC7180, SC7180 testers please take a look and have a test as well. sc7180 provides - 2 x VFE - 1 x VFE Lite - 2 x CSID - 1 x CSID Lite - 4 x CSI PHY The sc7180-camss binding should be comaptible with sdm845 yaml. I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and put new maintainer information. If this is not desirable then i can add binding to existing sdm845 yaml instead. In addition, a bootable tree of sm7125/joyeuse is availble at: https://github.com/99degree/linux/tree/camss To: Robert Foss <[email protected]> To: Todor Tomov <[email protected]> To: Bryan O'Donoghue <[email protected]> To: Mauro Carvalho Chehab <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: [email protected] To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: George Chan <[email protected]> --- Changes in v4: - EDITME: describe what is new in this series revision. - EDITME: use bulletpoints and terse descriptions. - Link to v3: https://lore.kernel.org/r/[email protected] Changes in v3: - Rebased on [email protected] - Bryan - Align email title to sc8280xp series - krzk - Line-up dt-binding example ordering to same as qcom,sm8250-camss.yaml - krzk - Drop non-related patches #5 #6 torvalds#7, I will send follow-up patches later - Add RFT tag to all patches, since no tested-by at all. - Drop required-opps node from dt - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Revised dt-binding title - krzk - Revised dt-binding maintainers - krzk - Drop all dt-binding minItems - krzk - Drops "|" symbol postfixed to description - krzk - Accending order of dt-binding required list - krzk - Added dt-binding item power-domain-name - Bryan - Reformat dt-binding example - krzk - Move reg as 2nd property - krzk - Move reg-names as 3nd property - krzk - Reduce iommus maxItems to 3 - rob's bot - Reduce clocks maxItems to 24 - rob's bot - Combine patch #2 and #3 - krzk and Bryan - Split eror-print log for clk name from #5 - Konrad - Reformat dt-node - krzk - Corrected phy init sequence for v1.2.2 - Bryan - Added 3 more debug info for missing clk and low clk-rate issue. - Adding port info to ports sub-node - Adding required-opps node to dt - Link to v1: https://lore.kernel.org/r/[email protected] --- b4-submit-tracking --- # This section is used internally by b4 prep for tracking purposes. { "series": { "revision": 4, "change-id": "20240621-b4-sc7180-camss-cddc6b60a9b4", "prefixes": [ "RFT" ], "history": { "v1": [ "[email protected]" ], "v2": [ "[email protected]" ], "v3": [ "[email protected]" ] } } }
99degree
pushed a commit
that referenced
this issue
Jun 27, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] torvalds#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] torvalds#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] torvalds#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] torvalds#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] torvalds#11 dio_complete at ffffffff8c2b9fa7 torvalds#12 do_blockdev_direct_IO at ffffffff8c2bc09f torvalds#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] torvalds#14 generic_file_direct_write at ffffffff8c1dcf14 torvalds#15 __generic_file_write_iter at ffffffff8c1dd07b torvalds#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] torvalds#17 aio_write at ffffffff8c2cc72e torvalds#18 kmem_cache_alloc at ffffffff8c248dde torvalds#19 do_io_submit at ffffffff8c2ccada torvalds#20 do_syscall_64 at ffffffff8c004984 torvalds#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
99degree
pushed a commit
that referenced
this issue
Aug 14, 2024
When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/[email protected]/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ torvalds#34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 torvalds#7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 torvalds#8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 torvalds#9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ torvalds#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: [email protected] CC: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: Tom Parkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
99degree
added a commit
that referenced
this issue
Aug 17, 2024
SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone. This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces. Since SM7125 is a low-speed variant of SC7180, SC7180 testers please take a look and have a test as well. sc7180 provides - 2 x VFE - 1 x VFE Lite - 2 x CSID - 1 x CSID Lite - 4 x CSI PHY The sc7180-camss binding should be comaptible with sdm845 yaml. I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and put new maintainer information. If this is not desirable then i can add binding to existing sdm845 yaml instead. In addition, a bootable tree of sm7125/joyeuse is availble at: https://github.com/99degree/linux/tree/camss To: Robert Foss <[email protected]> To: Todor Tomov <[email protected]> To: Bryan O'Donoghue <[email protected]> To: Mauro Carvalho Chehab <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: [email protected] To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: George Chan <[email protected]> --- Changes in v3: - Align email title to sc8280xp series - krzk - Line-up dt-binding example ordering to same as qcom,sm8250-camss.yaml - krzk - Drop non-related patches #5 #6 torvalds#7 - Add RFT tag to all patches, since no tested-by at all. - Drop required-opps node from dt - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Revised dt-binding title - krzk - Revised dt-binding maintainers - krzk - Drop all dt-binding minItems - krzk - Drops "|" symbol postfixed to description - krzk - Accending order of dt-binding required list - krzk - Added dt-binding item power-domain-name - Bryan - Reformat dt-binding example - krzk - Move reg as 2nd property - krzk - Move reg-names as 3nd property - krzk - Reduce iommus maxItems to 3 - rob's bot - Reduce clocks maxItems to 24 - rob's bot - Combine patch #2 and #3 - krzk and Bryan - Split eror-print log for clk name from #5 - Konrad - Reformat dt-node - krzk - Corrected phy init sequence for v1.2.2 - Bryan - Added 3 more debug info for missing clk and low clk-rate issue. - Adding port info to ports sub-node - Adding required-opps node to dt - Link to v1: https://lore.kernel.org/r/[email protected] --- b4-submit-tracking --- # This section is used internally by b4 prep for tracking purposes. { "series": { "revision": 3, "change-id": "20240621-b4-sc7180-camss-cddc6b60a9b4", "prefixes": [ "RFT" ], "history": { "v1": [ "[email protected]" ], "v2": [ "[email protected]" ] } } }
99degree
added a commit
that referenced
this issue
Aug 17, 2024
SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone. This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces. Since SM7125 is a low-speed variant of SC7180, SC7180 testers please take a look and have a test as well. sc7180 provides - 2 x VFE - 1 x VFE Lite - 2 x CSID - 1 x CSID Lite - 4 x CSI PHY The sc7180-camss binding should be comaptible with sdm845 yaml. I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and put new maintainer information. If this is not desirable then i can add binding to existing sdm845 yaml instead. In addition, a bootable tree of sm7125/joyeuse is availble at: https://github.com/99degree/linux/tree/camss To: Robert Foss <[email protected]> To: Todor Tomov <[email protected]> To: Bryan O'Donoghue <[email protected]> To: Mauro Carvalho Chehab <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: [email protected] To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: George Chan <[email protected]> --- Changes in v3: - Set proper email title manually again to all patches - krzk - Line-up dt-binding example ordering to same as qcom,sm8250-camss.yaml - krzk - Drop non-related patches #5 #6 torvalds#7 - Add RFT tag to all patches, since no tested-by at all. - Drop required-opps node from dt - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Revised dt-binding title - krzk - Revised dt-binding maintainers - krzk - Drop all dt-binding minItems - krzk - Drops "|" symbol postfixed to description - krzk - Accending order of dt-binding required list - krzk - Added dt-binding item power-domain-name - Bryan - Reformat dt-binding example - krzk - Move reg as 2nd property - krzk - Move reg-names as 3nd property - krzk - Reduce iommus maxItems to 3 - rob's bot - Reduce clocks maxItems to 24 - rob's bot - Combine patch #2 and #3 - krzk and Bryan - Split eror-print log for clk name from #5 - Konrad - Reformat dt-node - krzk - Corrected phy init sequence for v1.2.2 - Bryan - Added 3 more debug info for missing clk and low clk-rate issue. - Adding port info to ports sub-node - Adding required-opps node to dt - Link to v1: https://lore.kernel.org/r/[email protected] --- b4-submit-tracking --- # This section is used internally by b4 prep for tracking purposes. { "series": { "revision": 3, "change-id": "20240621-b4-sc7180-camss-cddc6b60a9b4", "prefixes": [ "RFT" ], "history": { "v1": [ "[email protected]" ], "v2": [ "[email protected]" ] } } }
99degree
added a commit
that referenced
this issue
Aug 17, 2024
SM7125 is the SoC found in the Xiaomi Redmi Note 9 Pro(joyeuse) cellphone. This series adds support to bring up the CSIPHY, CSID, VFE/RDI interfaces. Since SM7125 is a low-speed variant of SC7180, SC7180 testers please take a look and have a test as well. sc7180 provides - 2 x VFE - 1 x VFE Lite - 2 x CSID - 1 x CSID Lite - 4 x CSI PHY The sc7180-camss binding should be comaptible with sdm845 yaml. I've copied a new yaml from sdm845-camss.yaml, strip all _src clk and put new maintainer information. If this is not desirable then i can add binding to existing sdm845 yaml instead. In addition, a bootable tree of sm7125/joyeuse is availble at: https://github.com/99degree/linux/tree/camss To: Robert Foss <[email protected]> To: Todor Tomov <[email protected]> To: Bryan O'Donoghue <[email protected]> To: Mauro Carvalho Chehab <[email protected]> To: Rob Herring <[email protected]> To: Krzysztof Kozlowski <[email protected]> To: Conor Dooley <[email protected]> To: [email protected] To: Bjorn Andersson <[email protected]> To: Konrad Dybcio <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: George Chan <[email protected]> --- Changes in v3: - Rebased on [email protected] - Bryan - Align email title to sc8280xp series - krzk - Line-up dt-binding example ordering to same as qcom,sm8250-camss.yaml - krzk - Drop non-related patches #5 #6 torvalds#7 - Add RFT tag to all patches, since no tested-by at all. - Drop required-opps node from dt - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Revised dt-binding title - krzk - Revised dt-binding maintainers - krzk - Drop all dt-binding minItems - krzk - Drops "|" symbol postfixed to description - krzk - Accending order of dt-binding required list - krzk - Added dt-binding item power-domain-name - Bryan - Reformat dt-binding example - krzk - Move reg as 2nd property - krzk - Move reg-names as 3nd property - krzk - Reduce iommus maxItems to 3 - rob's bot - Reduce clocks maxItems to 24 - rob's bot - Combine patch #2 and #3 - krzk and Bryan - Split eror-print log for clk name from #5 - Konrad - Reformat dt-node - krzk - Corrected phy init sequence for v1.2.2 - Bryan - Added 3 more debug info for missing clk and low clk-rate issue. - Adding port info to ports sub-node - Adding required-opps node to dt - Link to v1: https://lore.kernel.org/r/[email protected] --- b4-submit-tracking --- # This section is used internally by b4 prep for tracking purposes. { "series": { "revision": 3, "change-id": "20240621-b4-sc7180-camss-cddc6b60a9b4", "prefixes": [ "RFT" ], "history": { "v1": [ "[email protected]" ], "v2": [ "[email protected]" ] } } }
99degree
pushed a commit
that referenced
this issue
Oct 13, 2024
On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] torvalds#7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] torvalds#8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] torvalds#9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
99degree
pushed a commit
that referenced
this issue
Oct 18, 2024
Syzkaller reported a lockdep splat:
============================================
WARNING: possible recursive locking detected
6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted
--------------------------------------------
syz-executor364/5113 is trying to acquire lock:
ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
but task is already holding lock:
ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(k-slock-AF_INET);
lock(k-slock-AF_INET);
*** DEADLOCK ***
May be due to missing lock nesting notation
7 locks held by syz-executor364/5113:
#0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline]
#0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806
#1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline]
#1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727
#2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline]
#2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470
#3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline]
#3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228
#4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline]
#4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104
#5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline]
#5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232
#6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
#6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
stack backtrace:
CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
check_deadlock kernel/locking/lockdep.c:3061 [inline]
validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855
__lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279
subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874
tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853
tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267
ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6108
__napi_poll+0xcb/0x490 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6963
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
do_softirq+0x11b/0x1e0 kernel/softirq.c:455
</IRQ>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline]
__dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450
dev_queue_xmit include/linux/netdevice.h:3105 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535
__tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466
tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline]
tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729
tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934
sk_backlog_rcv include/net/sock.h:1111 [inline]
__release_sock+0x214/0x350 net/core/sock.c:3004
release_sock+0x61/0x1f0 net/core/sock.c:3558
mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733
mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2597
___sys_sendmsg net/socket.c:2651 [inline]
__sys_sendmmsg+0x3b2/0x740 net/socket.c:2737
__do_sys_sendmmsg net/socket.c:2766 [inline]
__se_sys_sendmmsg net/socket.c:2763 [inline]
__x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f04fb13a6b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9
RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004
RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240
R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300
</TASK>
As noted by Cong Wang, the splat is false positive, but the code
path leading to the report is an unexpected one: a client is
attempting an MPC handshake towards the in-kernel listener created
by the in-kernel PM for a port based signal endpoint.
Such connection will be never accepted; many of them can make the
listener queue full and preventing the creation of MPJ subflow via
such listener - its intended role.
Explicitly detect this scenario at initial-syn time and drop the
incoming MPC request.
Fixes: 1729cf1 ("mptcp: create the listening socket for new port")
Cc: [email protected]
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e
Cc: Cong Wang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
99degree
pushed a commit
that referenced
this issue
Nov 4, 2024
Hou Tao says: ==================== The patch set fixes several issues in bits iterator. Patch #1 fixes the kmemleak problem of bits iterator. Patch #2~#3 fix the overflow problem of nr_bits. Patch #4 fixes the potential stack corruption when bits iterator is used on 32-bit host. Patch #5 adds more test cases for bits iterator. Please see the individual patches for more details. And comments are always welcome. --- v4: * patch #1: add ack from Yafang * patch #3: revert code-churn like changes: (1) compute nr_bytes and nr_bits before the check of nr_words. (2) use nr_bits == 64 to check for single u64, preventing build warning on 32-bit hosts. * patch #4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)" v3: https://lore.kernel.org/bpf/[email protected]/T/#t * split the bits-iterator related patches from "Misc fixes for bpf" patch set * patch #1: use "!nr_bits || bits >= nr_bits" to stop the iteration * patch #2: add a new helper for the overflow problem * patch #3: decrease the limitation from 512 to 511 and check whether nr_bytes is too large for bpf memory allocator explicitly * patch #5: add two more test cases for bit iterator v2: http://lore.kernel.org/bpf/[email protected] ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
99degree
pushed a commit
that referenced
this issue
Nov 4, 2024
Petr Machata says: ==================== mlxsw: Fixes In this patchset: - Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. Patch #1 adds a missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. - Commit b5b60bb ("mlxsw: pci: Use page pool for Rx buffers allocation") converted mlxsw to use page pool for Rx buffers allocation. Sync for CPU and for device should be done for Rx pages. In patches #2 and #3, add the missing calls to sync pages for, respectively, CPU and the device. - Patch #4 then fixes a bug to IPv6 GRE forwarding offload. Patch #5 adds a generic forwarding test that fails with mlxsw ports prior to the fix. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
99degree
pushed a commit
that referenced
this issue
Dec 17, 2024
Its used from trace__run(), for the 'perf trace' live mode, i.e. its
strace-like, non-perf.data file processing mode, the most common one.
The trace__run() function will set trace->host using machine__new_host()
that is supposed to give a machine instance representing the running
machine, and since we'll use perf_env__arch_strerrno() to get the right
errno -> string table, we need to use machine->env, so initialize it in
machine__new_host().
Before the patch:
(gdb) run trace --errno-summary -a sleep 1
<SNIP>
Summary of events:
gvfs-afc-volume (3187), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
pselect6 1 0 0.000 0.000 0.000 0.000 0.00%
GUsbEventThread (3519), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 1 0 0.000 0.000 0.000 0.000 0.00%
<SNIP>
Program received signal SIGSEGV, Segmentation fault.
0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
478 if (env->arch_strerrno == NULL)
(gdb) bt
#0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
#1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673
#2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708
#3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747
#4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456
#5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487
#6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351
torvalds#7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404
torvalds#8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448
torvalds#9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560
(gdb)
After:
root@number:~# perf trace -a --errno-summary sleep 1
<SNIP>
pw-data-loop (2685), 1410 events, 16.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68%
ioctl 94 0 0.811 0.004 0.009 0.016 2.82%
read 188 0 0.322 0.001 0.002 0.006 5.15%
write 141 0 0.280 0.001 0.002 0.018 8.39%
timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47%
gnome-control-c (179406), 1848 events, 20.9%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 222 0 959.577 0.000 4.322 21.414 11.40%
recvmsg 150 0 0.539 0.001 0.004 0.013 5.12%
write 300 0 0.442 0.001 0.001 0.007 3.29%
read 150 0 0.183 0.001 0.001 0.009 5.53%
getpid 102 0 0.101 0.000 0.001 0.008 7.82%
root@number:~#
Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()")
Reported-by: Veronika Molnarova <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Veronika Molnarova <[email protected]>
Acked-by: Michael Petlan <[email protected]>
Tested-by: Michael Petlan <[email protected]>
Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1
Signed-off-by: Namhyung Kim <[email protected]>
99degree
pushed a commit
that referenced
this issue
Dec 17, 2024
Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced torvalds#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b torvalds#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 torvalds#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <[email protected]> Signed-off-by: Chunguang.xu <[email protected]> Signed-off-by: Yue.zhao <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Keith Busch <[email protected]>
99degree
pushed a commit
that referenced
this issue
Dec 17, 2024
Hou Tao says: ==================== This patch set fixes several issues for LPM trie. These issues were found during adding new test cases or were reported by syzbot. The patch set is structured as follows: Patch #1~#2 are clean-ups for lpm_trie_update_elem(). Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie. Patch #4 fixes the accounting of n_entries when doing in-place update. Patch #5 fixes the exact match condition in trie_get_next_key() and it may skip keys when the passed key is not found in the map. Patch #6~torvalds#7 switch from kmalloc() to bpf memory allocator for LPM trie to fix several lock order warnings reported by syzbot. It also enables raw_spinlock_t for LPM trie again. After these changes, the LPM trie will be closer to being usable in any context (though the reentrance check of trie->lock is still missing, but it is on my todo list). Patch torvalds#8: move test_lpm_map to map_tests to make it run regularly. Patch torvalds#9: add test cases for the issues fixed by patch #3~#5. Please see individual patches for more details. Comments are always welcome. Change Log: v3: * patch #2: remove the unnecessary NULL-init for im_node * patch #6: alloc the leaf node before disabling IRQ to low the possibility of -ENOMEM when leaf_size is large; Free these nodes outside the trie lock (Suggested by Alexei) * collect review and ack tags (Thanks for Toke & Daniel) v2: https://lore.kernel.org/bpf/[email protected]/ * collect review tags (Thanks for Toke) * drop "Add bpf_mem_cache_is_mergeable() helper" patch * patch #3~#4: add fix tag * patch #4: rename the helper to trie_check_add_elem() and increase n_entries in it. * patch #6: use one bpf mem allocator and update commit message to clarify that using bpf mem allocator is more appropriate. * patch torvalds#7: update commit message to add the possible max running time for update operation. * patch torvalds#9: update commit message to specify the purpose of these test cases. v1: https://lore.kernel.org/bpf/[email protected]/ ==================== Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Alexei Starovoitov <[email protected]>
99degree
pushed a commit
that referenced
this issue
Dec 17, 2024
…s_lock For storing a value to a queue attribute, the queue_attr_store function first freezes the queue (->q_usage_counter(io)) and then acquire ->sysfs_lock. This seems not correct as the usual ordering should be to acquire ->sysfs_lock before freezing the queue. This incorrect ordering causes the following lockdep splat which we are able to reproduce always simply by accessing /sys/kernel/debug file using ls command: [ 57.597146] WARNING: possible circular locking dependency detected [ 57.597154] 6.12.0-10553-gb86545e02e8c torvalds#20 Tainted: G W [ 57.597162] ------------------------------------------------------ [ 57.597168] ls/4605 is trying to acquire lock: [ 57.597176] c00000003eb56710 (&mm->mmap_lock){++++}-{4:4}, at: __might_fault+0x58/0xc0 [ 57.597200] but task is already holding lock: [ 57.597207] c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4 [ 57.597226] which lock already depends on the new lock. [ 57.597233] the existing dependency chain (in reverse order) is: [ 57.597241] -> #5 (&sb->s_type->i_mutex_key#3){++++}-{4:4}: [ 57.597255] down_write+0x6c/0x18c [ 57.597264] start_creating+0xb4/0x24c [ 57.597274] debugfs_create_dir+0x2c/0x1e8 [ 57.597283] blk_register_queue+0xec/0x294 [ 57.597292] add_disk_fwnode+0x2e4/0x548 [ 57.597302] brd_alloc+0x2c8/0x338 [ 57.597309] brd_init+0x100/0x178 [ 57.597317] do_one_initcall+0x88/0x3e4 [ 57.597326] kernel_init_freeable+0x3cc/0x6e0 [ 57.597334] kernel_init+0x34/0x1cc [ 57.597342] ret_from_kernel_user_thread+0x14/0x1c [ 57.597350] -> #4 (&q->debugfs_mutex){+.+.}-{4:4}: [ 57.597362] __mutex_lock+0xfc/0x12a0 [ 57.597370] blk_register_queue+0xd4/0x294 [ 57.597379] add_disk_fwnode+0x2e4/0x548 [ 57.597388] brd_alloc+0x2c8/0x338 [ 57.597395] brd_init+0x100/0x178 [ 57.597402] do_one_initcall+0x88/0x3e4 [ 57.597410] kernel_init_freeable+0x3cc/0x6e0 [ 57.597418] kernel_init+0x34/0x1cc [ 57.597426] ret_from_kernel_user_thread+0x14/0x1c [ 57.597434] -> #3 (&q->sysfs_lock){+.+.}-{4:4}: [ 57.597446] __mutex_lock+0xfc/0x12a0 [ 57.597454] queue_attr_store+0x9c/0x110 [ 57.597462] sysfs_kf_write+0x70/0xb0 [ 57.597471] kernfs_fop_write_iter+0x1b0/0x2ac [ 57.597480] vfs_write+0x3dc/0x6e8 [ 57.597488] ksys_write+0x84/0x140 [ 57.597495] system_call_exception+0x130/0x360 [ 57.597504] system_call_common+0x160/0x2c4 [ 57.597516] -> #2 (&q->q_usage_counter(io)torvalds#21){++++}-{0:0}: [ 57.597530] __submit_bio+0x5ec/0x828 [ 57.597538] submit_bio_noacct_nocheck+0x1e4/0x4f0 [ 57.597547] iomap_readahead+0x2a0/0x448 [ 57.597556] xfs_vm_readahead+0x28/0x3c [ 57.597564] read_pages+0x88/0x41c [ 57.597571] page_cache_ra_unbounded+0x1ac/0x2d8 [ 57.597580] filemap_get_pages+0x188/0x984 [ 57.597588] filemap_read+0x13c/0x4bc [ 57.597596] xfs_file_buffered_read+0x88/0x17c [ 57.597605] xfs_file_read_iter+0xac/0x158 [ 57.597614] vfs_read+0x2d4/0x3b4 [ 57.597622] ksys_read+0x84/0x144 [ 57.597629] system_call_exception+0x130/0x360 [ 57.597637] system_call_common+0x160/0x2c4 [ 57.597647] -> #1 (mapping.invalidate_lock#2){++++}-{4:4}: [ 57.597661] down_read+0x6c/0x220 [ 57.597669] filemap_fault+0x870/0x100c [ 57.597677] xfs_filemap_fault+0xc4/0x18c [ 57.597684] __do_fault+0x64/0x164 [ 57.597693] __handle_mm_fault+0x1274/0x1dac [ 57.597702] handle_mm_fault+0x248/0x484 [ 57.597711] ___do_page_fault+0x428/0xc0c [ 57.597719] hash__do_page_fault+0x30/0x68 [ 57.597727] do_hash_fault+0x90/0x35c [ 57.597736] data_access_common_virt+0x210/0x220 [ 57.597745] _copy_from_user+0xf8/0x19c [ 57.597754] sel_write_load+0x178/0xd54 [ 57.597762] vfs_write+0x108/0x6e8 [ 57.597769] ksys_write+0x84/0x140 [ 57.597777] system_call_exception+0x130/0x360 [ 57.597785] system_call_common+0x160/0x2c4 [ 57.597794] -> #0 (&mm->mmap_lock){++++}-{4:4}: [ 57.597806] __lock_acquire+0x17cc/0x2330 [ 57.597814] lock_acquire+0x138/0x400 [ 57.597822] __might_fault+0x7c/0xc0 [ 57.597830] filldir64+0xe8/0x390 [ 57.597839] dcache_readdir+0x80/0x2d4 [ 57.597846] iterate_dir+0xd8/0x1d4 [ 57.597855] sys_getdents64+0x88/0x2d4 [ 57.597864] system_call_exception+0x130/0x360 [ 57.597872] system_call_common+0x160/0x2c4 [ 57.597881] other info that might help us debug this: [ 57.597888] Chain exists of: &mm->mmap_lock --> &q->debugfs_mutex --> &sb->s_type->i_mutex_key#3 [ 57.597905] Possible unsafe locking scenario: [ 57.597911] CPU0 CPU1 [ 57.597917] ---- ---- [ 57.597922] rlock(&sb->s_type->i_mutex_key#3); [ 57.597932] lock(&q->debugfs_mutex); [ 57.597940] lock(&sb->s_type->i_mutex_key#3); [ 57.597950] rlock(&mm->mmap_lock); [ 57.597958] *** DEADLOCK *** [ 57.597965] 2 locks held by ls/4605: [ 57.597971] #0: c0000000137c12f8 (&f->f_pos_lock){+.+.}-{4:4}, at: fdget_pos+0xcc/0x154 [ 57.597989] #1: c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4 Prevent the above lockdep warning by acquiring ->sysfs_lock before freezing the queue while storing a queue attribute in queue_attr_store function. Later, we also found[1] another function __blk_mq_update_nr_ hw_queues where we first freeze queue and then acquire the ->sysfs_lock. So we've also updated lock ordering in __blk_mq_update_nr_hw_queues function and ensured that in all code paths we follow the correct lock ordering i.e. acquire ->sysfs_lock before freezing the queue. [1] https://lore.kernel.org/all/CAFj5m9Ke8+EHKQBs_Nk6hqd=LGXtk4mUxZUN5==ZcCjnZSBwHw@mail.gmail.com/ Reported-by: [email protected] Fixes: af28141 ("block: freeze the queue in queue_attr_store") Tested-by: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Nilay Shroff <[email protected]> Reviewed-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
99degree
pushed a commit
that referenced
this issue
Jan 10, 2025
syzbot reports that a recent fix causes nesting issues between the (now) raw timeoutlock and the eventfd locking: ============================= [ BUG: Invalid wait context ] 6.13.0-rc4-00080-g9828a4c0901f torvalds#29 Not tainted ----------------------------- kworker/u32:0/68094 is trying to lock: ffff000014d7a520 (&ctx->wqh#2){..-.}-{3:3}, at: eventfd_signal_mask+0x64/0x180 other info that might help us debug this: context-{5:5} 6 locks held by kworker/u32:0/68094: #0: ffff0000c1d98148 ((wq_completion)iou_exit){+.+.}-{0:0}, at: process_one_work+0x4e8/0xfc0 #1: ffff80008d927c78 ((work_completion)(&ctx->exit_work)){+.+.}-{0:0}, at: process_one_work+0x53c/0xfc0 #2: ffff0000c59bc3d8 (&ctx->completion_lock){+.+.}-{3:3}, at: io_kill_timeouts+0x40/0x180 #3: ffff0000c59bc358 (&ctx->timeout_lock){-.-.}-{2:2}, at: io_kill_timeouts+0x48/0x180 #4: ffff800085127aa0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x8/0x38 #5: ffff800085127aa0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x8/0x38 stack backtrace: CPU: 7 UID: 0 PID: 68094 Comm: kworker/u32:0 Not tainted 6.13.0-rc4-00080-g9828a4c0901f torvalds#29 Hardware name: linux,dummy-virt (DT) Workqueue: iou_exit io_ring_exit_work Call trace: show_stack+0x1c/0x30 (C) __dump_stack+0x24/0x30 dump_stack_lvl+0x60/0x80 dump_stack+0x14/0x20 __lock_acquire+0x19f8/0x60c8 lock_acquire+0x1a4/0x540 _raw_spin_lock_irqsave+0x90/0xd0 eventfd_signal_mask+0x64/0x180 io_eventfd_signal+0x64/0x108 io_req_local_work_add+0x294/0x430 __io_req_task_work_add+0x1c0/0x270 io_kill_timeout+0x1f0/0x288 io_kill_timeouts+0xd4/0x180 io_uring_try_cancel_requests+0x2e8/0x388 io_ring_exit_work+0x150/0x550 process_one_work+0x5e8/0xfc0 worker_thread+0x7ec/0xc80 kthread+0x24c/0x300 ret_from_fork+0x10/0x20 because after the preempt-rt fix for the timeout lock nesting inside the io-wq lock, we now have the eventfd spinlock nesting inside the raw timeout spinlock. Rather than play whack-a-mole with other nesting on the timeout lock, split the deletion and killing of timeouts so queueing the task_work for the timeout cancelations can get done outside of the timeout lock. Reported-by: [email protected] Fixes: 020b40f ("io_uring: make ctx->timeout_lock a raw spinlock") Signed-off-by: Jens Axboe <[email protected]>
99degree
pushed a commit
that referenced
this issue
Jan 10, 2025
…le_direct_reclaim() The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 torvalds#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 torvalds#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 torvalds#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
99degree
pushed a commit
that referenced
this issue
Jan 10, 2025
…nt message
Address a bug in the kernel that triggers a "sleeping function called from
invalid context" warning when /sys/kernel/debug/kmemleak is printed under
specific conditions:
- CONFIG_PREEMPT_RT=y
- Set SELinux as the LSM for the system
- Set kptr_restrict to 1
- kmemleak buffer contains at least one item
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
6 locks held by cat/136:
#0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30
#1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128
#3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0
#4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0
#5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0
irq event stamp: 136660
hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8
hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0
softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8
softirqs last disabled at (0): [<0000000000000000>] 0x0
Preemption disabled at:
[<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0
CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ torvalds#34
Tainted: [E]=UNSIGNED_MODULE
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xa0/0x128
show_stack+0x1c/0x30
dump_stack_lvl+0xe8/0x198
dump_stack+0x18/0x20
rt_spin_lock+0x8c/0x1a8
avc_perm_nonode+0xa0/0x150
cred_has_capability.isra.0+0x118/0x218
selinux_capable+0x50/0x80
security_capable+0x7c/0xd0
has_ns_capability_noaudit+0x94/0x1b0
has_capability_noaudit+0x20/0x30
restricted_pointer+0x21c/0x4b0
pointer+0x298/0x760
vsnprintf+0x330/0xf70
seq_printf+0x178/0x218
print_unreferenced+0x1a4/0x2d0
kmemleak_seq_show+0xd0/0x1e0
seq_read_iter+0x354/0xe30
seq_read+0x250/0x378
full_proxy_read+0xd8/0x148
vfs_read+0x190/0x918
ksys_read+0xf0/0x1e0
__arm64_sys_read+0x70/0xa8
invoke_syscall.constprop.0+0xd4/0x1d8
el0_svc+0x50/0x158
el0t_64_sync+0x17c/0x180
%pS and %pK, in the same back trace line, are redundant, and %pS can void
%pK service in certain contexts.
%pS alone already provides the necessary information, and if it cannot
resolve the symbol, it falls back to printing the raw address voiding
the original intent behind the %pK.
Additionally, %pK requires a privilege check CAP_SYSLOG enforced through
the LSM, which can trigger a "sleeping function called from invalid
context" warning under RT_PREEMPT kernels when the check occurs in an
atomic context. This issue may also affect other LSMs.
This change avoids the unnecessary privilege check and resolves the
sleeping function warning without any loss of information.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 3a6f33d ("mm/kmemleak: use %pK to display kernel pointers in backtrace")
Signed-off-by: Alessandro Carminati <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Clément Léger <[email protected]>
Cc: Alessandro Carminati <[email protected]>
Cc: Eric Chanudet <[email protected]>
Cc: Gabriele Paoloni <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Weißschuh <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
99degree
pushed a commit
that referenced
this issue
Jan 26, 2025
Daniel Machon says:
====================
net: lan969x: add FDMA support
== Description:
This series is the last of a multi-part series, that prepares and adds
support for the new lan969x switch driver.
The upstreaming efforts has been split into multiple series:
1) Prepare the Sparx5 driver for lan969x (merged)
2) Add support for lan969x (same basic features as Sparx5
provides excl. FDMA and VCAP, merged).
3) Add lan969x VCAP functionality (merged).
4) Add RGMII support (merged).
--> 5) Add FDMA support.
== FDMA support:
The lan969x switch device uses the same FDMA engine as the Sparx5 switch
device, with the same number of channels etc. This means we can utilize
the newly added FDMA library, that is already in use by the lan966x and
sparx5 drivers.
As previous lan969x series, the FDMA implementation will hook into the
Sparx5 implementation where possible, however both RX and TX handling
will be done differently on lan969x and therefore requires a separate
implementation of the RX and TX path.
Details are in the commit description of the individual patches
== Patch breakdown:
Patch #1: Enable FDMA support on lan969x
Patch #2: Split start()/stop() functions
Patch #3: Activate TX FDMA in start()
Patch #4: Ops out a few functions that differ on the two platforms
Patch #5: Add FDMA implementation for lan969x
v1: https://lore.kernel.org/20250109-sparx5-lan969x-switch-driver-5-v1-0-13d6d8451e63@microchip.com
====================
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-0-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <[email protected]>
99degree
pushed a commit
that referenced
this issue
Jan 26, 2025
Petr Machata says: ==================== mlxsw: Move Tx header handling to PCI driver Amit Cohen writes: Tx header should be added to all packets transmitted from the CPU to Spectrum ASICs. Historically, handling this header was added as a driver function, as Tx header is different between Spectrum and Switch-X. From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant code was removed. For now, there is no justification to handle Tx header as part of spectrum.c, we can handle this as part of PCI, in skb_transmit(). This change will also be useful when XDP support will be added to mlxsw, as for XDP_TX and XDP_REDIRECT actions, Tx header should be added before transmitting the packet. Patch set overview: Patches #1-#2 add structure to store Tx header info and initialize it Patch #3 moves definitions of Tx header fields to txheader.h Patch #4 moves Tx header handling to PCI driver Patch #5 removes unnecessary attribute ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
99degree
pushed a commit
that referenced
this issue
Jan 26, 2025
Hou Tao says: ==================== The patch set continues the previous work [1] to move all the freeings of htab elements out of bucket lock. One motivation for the patch set is the locking problem reported by Sebastian [2]: the freeing of bpf_timer under PREEMPT_RT may acquire a spin-lock (namely softirq_expiry_lock). However the freeing procedure for htab element has already held a raw-spin-lock (namely bucket lock), and it will trigger the warning: "BUG: scheduling while atomic" as demonstrated by the selftests patch. Another motivation is to reduce the locked scope of bucket lock. However, the patch set doesn't move all freeing of htab element out of bucket lock, it still keep the free of special fields in pre-allocated hash map under the protect of bucket lock in htab_map_update_elem(). The patch set is structured as follows: * Patch #1 moves the element freeing out of bucket lock for htab_lru_map_delete_node(). However the freeing is still in the locked scope of LRU raw spin lock. * Patch #2~#3 move the element freeing out of bucket lock for __htab_map_lookup_and_delete_elem() * Patch #4 cancels the bpf_timer in two steps to fix the locking problem in htab_map_update_elem() for PREEMPT_PRT. * Patch #5 adds a selftest for the locking problem Please see individual patches for more details. Comments are always welcome. --- v3: * patch #1: update the commit message to state that the freeing of special field is still in the locked scope of LRU raw spin lock * patch #4: cancel the bpf_timer in two steps only for PREEMPT_RT (suggested by Alexei) v2: https://lore.kernel.org/bpf/[email protected] * cancels the bpf timer in two steps instead of breaking the reuse the refill of per-cpu ->extra_elems into two steps v1: https://lore.kernel.org/bpf/[email protected] [1]: https://lore.kernel.org/bpf/[email protected] [2]: https://lore.kernel.org/bpf/[email protected] ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
99degree
pushed a commit
that referenced
this issue
Jan 28, 2025
When testing the atomic write fix patches, the f2fs_bug_on was triggered as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inode.c:935! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 3 UID: 0 PID: 257 Comm: bash Not tainted 6.13.0-rc1-00033-gc283a70d3497 #5 RIP: 0010:f2fs_evict_inode+0x50f/0x520 Call Trace: <TASK> ? __die_body+0x65/0xb0 ? die+0x9f/0xc0 ? do_trap+0xa1/0x170 ? f2fs_evict_inode+0x50f/0x520 ? f2fs_evict_inode+0x50f/0x520 ? handle_invalid_op+0x65/0x80 ? f2fs_evict_inode+0x50f/0x520 ? exc_invalid_op+0x39/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? __pfx_f2fs_get_dquots+0x10/0x10 ? f2fs_evict_inode+0x50f/0x520 ? f2fs_evict_inode+0x2e5/0x520 evict+0x186/0x2f0 prune_icache_sb+0x75/0xb0 super_cache_scan+0x1a8/0x200 do_shrink_slab+0x163/0x320 shrink_slab+0x2fc/0x470 drop_slab+0x82/0xf0 drop_caches_sysctl_handler+0x4e/0xb0 proc_sys_call_handler+0x183/0x280 vfs_write+0x36d/0x450 ksys_write+0x68/0xd0 do_syscall_64+0xc8/0x1a0 ? arch_exit_to_user_mode_prepare+0x11/0x60 ? irqentry_exit_to_user_mode+0x7e/0xa0 The root cause is: f2fs uses FI_ATOMIC_DIRTIED to indicate dirty atomic files during commit. If the inode is dirtied during commit, such as by f2fs_i_pino_write, the vfs inode keeps clean and the f2fs inode is set to FI_DIRTY_INODE. The FI_DIRTY_INODE flag cann't be cleared by write_inode later due to the clean vfs inode. Finally, f2fs_bug_on is triggered due to this inconsistent state when evict. To reproduce this situation: - fd = open("/mnt/test.db", O_WRONLY) - ioctl(fd, F2FS_IOC_START_ATOMIC_WRITE) - mv /mnt/test.db /mnt/test1.db - ioctl(fd, F2FS_IOC_COMMIT_ATOMIC_WRITE) - echo 3 > /proc/sys/vm/drop_caches To fix this problem, clear FI_DIRTY_INODE after commit, then f2fs_mark_inode_dirty_sync will ensure a consistent dirty state. Fixes: fccaa81 ("f2fs: prevent atomic file from being dirtied before commit") Signed-off-by: Yunlei He <[email protected]> Signed-off-by: Jianan Huang <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
99degree
pushed a commit
that referenced
this issue
Feb 1, 2025
libtraceevent parses and returns an array of argument fields, sometimes
larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr",
idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6
elements max, creating an out-of-bounds access. This runtime error is
found by UBsan. The error message:
$ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1
builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]'
#0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966
#1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110
#2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436
#3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897
#4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335
#5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502
#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351
torvalds#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404
torvalds#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448
torvalds#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556
torvalds#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
torvalds#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360
torvalds#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6)
0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1
Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint")
Signed-off-by: Howard Chu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
99degree
pushed a commit
that referenced
this issue
Feb 2, 2025
This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 #6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 torvalds#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 torvalds#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 torvalds#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Yang Shi <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
as stated, if anybody is willing to do submission is appreciated.
camss codes are inside
https://github.com/99degree/linux/tree/camss
camss based on linaro patches:
https://github.com/99degree/linux/tree/camss-working
The demo of working camss by pmos
https://www.youtube.com/watch?v=U_do11pSf1s
TODO:
clean up all _SRC clk
verify mem reg for vfe/csid/cphy
remove sm7150 codes
see if based on linaro pixel format split patch or not.
vendor vfe frequency caused some issue, default lower speed does fine without isp
TESTED:
no vfe/csid/cphy timeout
restart capture is fine.
The text was updated successfully, but these errors were encountered: