Update Arduino core and BLE/WiFiManager libs.

.github/workflows/build.yml

@@ -4,28 +4,95 @@ on: [push, pull_request]
 
 jobs:
   build:
+    strategy:
+      fail-fast: false
+      matrix:
+        environments:
+          - "rfbridge"
+          - "sonoff-rfbridge-direct"
+          - "esp32dev-all-test"
+          - "esp32dev-rf"
+          - "esp32dev-pilight-cc1101"
+          - "esp32dev-somfy-cc1101"
+          - "esp32dev-pilight-somfy-cc1101"
+          - "esp32dev-weatherstation"
+          - "esp32dev-gf-sun-inverter"
+          - "esp32dev-ir"
+          - "esp32dev-ble"
+          - "esp32dev-ble-openhab"
+          - "esp32dev-ble-mqtt-undecoded"
+          - "esp32dev-ble-aws"
+          - "esp32dev-ble-cont"
+          - "esp32feather-ble"
+          - "esp32-lolin32lite-ble"
+          - "esp32-olimex-gtw-ble-eth"
+          - "esp32-olimex-gtw-ble-poe"
+          - "esp32-olimex-gtw-ble-poe-iso"
+          - "esp32-wt32-eth01-ble-eth"
+          - "esp32-olimex-gtw-ble-wifi"
+          - "esp32-m5stick-ble"
+          - "esp32-m5stack-ble"
+          - "esp32-m5tough-ble"
+          - "esp32-m5stick-c-ble"
+          - "esp32-m5stick-cp-ble"
+          - "esp32-m5atom"
+          - "esp32dev-rtl_433"
+          - "heltec-rtl_433"
+          - "esp32dev-multi_receiver"
+          - "tinypico-ble"
+          - "ttgo-lora32-v1-868"
+          - "ttgo-lora32-v1-915"
+          - "ttgo-t-beam"
+          - "heltec-wifi-lora-32-868"
+          - "heltec-wifi-lora-32-915"
+          - "esp32dev-mqtt-fw-test"
+          - "nodemcuv2-all-test"
+          - "nodemcuv2-fastled-test"
+          - "nodemcuv2-2g"
+          - "nodemcuv2-ir"
+          - "nodemcuv2-rs232"
+          - "avatto-bakeey-ir"
+          - "nodemcuv2-rf"
+          - "nodemcuv2-rf-cc1101"
+          - "nodemcuv2-somfy-cc1101"
+          - "manual-wifi-test"
+          - "openhab-test"
+          - "nodemcuv2-mqtt-fw-test"
+          - "rf-wifi-gateway"
+          - "nodemcuv2-rf2"
+          - "nodemcuv2-rf2-cc1101"
+          - "nodemcuv2-pilight"
+          - "nodemcuv2-weatherstation"
+          - "sonoff-basic"
+          - "sonoff-basic-rfr3"
+          - "atmega-all-test"
+          - "uno-rf"
+          - "uno-fastled"
+          - "esp32dev-ble-datatest"
+          - "esp32s3-dev-c1-ble"
+          - "esp32c3-dev-m1-ble"
     runs-on: ubuntu-latest
     name: Build with PlatformIO
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Set up Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
-          python-version: "3.7"
+          python-version: "3.x"
       - name: Install platformio
         run: |
           python -m pip install --upgrade pip
           pip install platformio
       - name: Run PlatformIO
-        run: platformio run
+        run: platformio run -e ${{ matrix.environments }}
 
   documentation:
     runs-on: ubuntu-latest
     name: Create the documentation
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Set up Node.js
-        uses: actions/setup-node@v1
+        uses: actions/setup-node@v3
         with:
           node-version: "14.x"
       - name: Install build dependencies

.github/workflows/release.yml

@@ -9,9 +9,9 @@ jobs:
     runs-on: ubuntu-latest
     name: Build and upload Assets to Release
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Set up Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: "3.7"
       - name: Install platformio
@@ -44,13 +44,13 @@ jobs:
     runs-on: ubuntu-latest
     name: Create the documentation and deploy it to GitHub Pages
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Set up Node.js
-        uses: actions/setup-node@v1
+        uses: actions/setup-node@v3
         with:
           node-version: "14.x"
       - name: Set up Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: "3.7"
       - name: Install build dependencies

main/ZgatewayBT.ino

@@ -32,7 +32,6 @@ Thanks to wolass https://github.com/wolass for suggesting me HM 10 and dinosd ht
 
 #ifdef ZgatewayBT
 
-#  include "FreeRTOS.h"
 SemaphoreHandle_t semaphoreCreateOrUpdateDevice;
 SemaphoreHandle_t semaphoreBLEOperation;
 QueueHandle_t BLEQueue;
@@ -46,8 +45,8 @@ QueueHandle_t BLEQueue;
 #  include <esp_bt.h>
 #  include <esp_bt_main.h>
 #  include <esp_wifi.h>
-#  include <stdatomic.h>
 
+#  include <atomic>
 #  include <vector>
 
 #  include "ZgatewayBLEConnect.h"

main/ZgatewayRTL_433.ino

@@ -1,18 +1,18 @@
-/*  
-  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+/*
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation
 
-   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker
    Send and receiving command by MQTT
- 
+
   This gateway enables to:
  - receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data
  - publish MQTT data to a different topic related to received 433Mhz signal
  - leverage the rtl_433 device decoders on a ESP32 device
 
     Copyright: (c)Florian ROBERT
-  
+
     This file is part of OpenMQTTGateway.
-    
+
     OpenMQTTGateway is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, either version 3 of the License, or
@@ -44,7 +44,7 @@ void rtl_433_Callback(char* message) {
     return;
   }
 
-  unsigned long MQTTvalue = (int)RFrtl_433_ESPdata["id"] + round(RFrtl_433_ESPdata["temperature_C"]);
+  unsigned long MQTTvalue = (int)RFrtl_433_ESPdata["id"] + round((float)RFrtl_433_ESPdata["temperature_C"]);
   String topic = String(subjectRTL_433toMQTT);
 #  if valueAsATopic
   String model = RFrtl_433_ESPdata["model"];

main/main.ino

@@ -1160,8 +1160,8 @@ void setup_wifimanager(bool reset_settings) {
   WiFiManagerParameter custom_mqtt_user("user", "mqtt user", mqtt_user, parameters_size);
   WiFiManagerParameter custom_mqtt_pass("pass", "mqtt pass", mqtt_pass, parameters_size);
   WiFiManagerParameter custom_mqtt_topic("topic", "mqtt base topic", mqtt_topic, mqtt_topic_max_size);
-  WiFiManagerParameter custom_mqtt_secure("secure", "mqtt secure", "1", 1, mqtt_secure ? "type=\"checkbox\" checked" : "type=\"checkbox\"");
-  WiFiManagerParameter custom_mqtt_cert("cert", "mqtt broker cert", mqtt_cert.c_str(), 2048);
+  WiFiManagerParameter custom_mqtt_secure("secure", "mqtt secure", "1", 2, mqtt_secure ? "type=\"checkbox\" checked" : "type=\"checkbox\"");
+  WiFiManagerParameter custom_mqtt_cert("cert", "<br/>mqtt broker cert", mqtt_cert.c_str(), 2048);
   WiFiManagerParameter custom_gateway_name("name", "gateway name", gateway_name, parameters_size);
 #  endif
   //WiFiManager

platformio.ini

@@ -100,7 +100,7 @@ arduinolog = https://github.com/1technophile/Arduino-Log.git#d13cd80
 pubsubclient = [email protected]
 rc-switch = https://github.com/1technophile/rc-switch.git#98537e9
 newremoteswitch = https://github.com/1technophile/NewRemoteSwitch.git#8eb980e
-ble = https://github.com/h2zero/NimBLE-Arduino.git#1.3.8
+ble = https://github.com/h2zero/NimBLE-Arduino.git#1.4.1
 irremoteesp = [email protected]
 irremote = https://github.com/z3t0/Arduino-IRremote.git#1c08a37
 lora = https://github.com/sandeepmistry/arduino-LoRa.git#f4a1d27
@@ -118,7 +118,7 @@ htu21 = SparkFun HTU21D Humidity and Temperature Sensor [email protected]
 ahtx0 = Adafruit AHTX0
 ina226 = https://github.com/jarzebski/Arduino-INA226.git#968a684
 a6lib = https://github.com/h2zero/A6lib
-wifimanager32 = https://github.com/tzapu/WiFiManager.git#c3ff582
+wifimanager32 = https://github.com/tzapu/WiFiManager.git#9f5981e
 wifimanager8266 = https://github.com/tzapu/WiFiManager.git#2.0.5-beta
 ethernet = Ethernet
 esp8266_mdns = esp8266_mdns
@@ -154,7 +154,8 @@ monitor_speed = 115200
 
 [com]
 esp8266_platform = [email protected]
-esp32_platform = [email protected]
+esp32_platform = [email protected]
+esp32_c3_s3_platform = [email protected]
 atmelavr_platform = [email protected]
 
 [com-esp]
@@ -919,7 +920,7 @@ lib_deps =
   ${com-esp.lib_deps}
   ${libraries.wifimanager32}
   ${libraries.lora}
-  ${libraries.ssd1306} 
+  ${libraries.ssd1306}
 build_flags =
   ${com-esp.build_flags}
     ; *** OpenMQTTGateway Modules ***
@@ -940,7 +941,7 @@ lib_deps =
   ${com-esp.lib_deps}
   ${libraries.wifimanager32}
   ${libraries.lora}
-  ${libraries.ssd1306} 
+  ${libraries.ssd1306}
 build_flags =
   ${com-esp.build_flags}
   ; *** OpenMQTTGateway Modules ***
@@ -1388,3 +1389,38 @@ build_flags =
   '-DpubKnownBLEServiceData=true'
   '-DpubBLEServiceUUID=true'
   '-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'
+
+[env:esp32s3-dev-c1-ble]
+platform = ${com.esp32_c3_s3_platform}
+board = esp32-s3-devkitc-1
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.wifimanager32}
+  ${libraries.ble}
+  ${libraries.decoder}
+build_flags =
+  ${com-esp.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DLED_SEND_RECEIVE=12'
+  '-DLED_SEND_RECEIVE_ON=0'
+  '-DLED_INFO=13'
+  '-DLED_ERROR=14'
+  '-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'
+
+[env:esp32c3-dev-m1-ble]
+platform = ${com.esp32_c3_s3_platform}
+board = esp32-c3-devkitm-1
+board_build.partitions = min_spiffs.csv
+lib_deps =
+  ${com-esp.lib_deps}
+  ${libraries.wifimanager32}
+  ${libraries.ble}
+  ${libraries.decoder}
+build_flags =
+  ${com-esp.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DLED_SEND_RECEIVE=2'
+  '-DLED_SEND_RECEIVE_ON=0'
+  '-DLED_INFO=6'
+  '-DLED_ERROR=7'
+  '-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'