Fibaro FGS221 - not reporting state of first channel only

[rohrsh]

Checklist

• I have read and followed the above instructions

• I have checked the troubleshooting section and my problem is not described there.

• I have read the changelog and my problem was not mentioned there or the fix did not work.

Describe the issue

What is happening?
I have a number of FGS221 (Fibaro Double Relay Switch 2x1.5kW) units. When I press the two physical buttons, only the state of the second channel is updated in ZWaveJS UI, not the first.

What did you expect to happen instead?
Status reports for first channel to be received and handled by ZWaveJS.

Steps to reproduce the behaviour: Mash the buttons.

Anything else we should know?

I presume this is related to the mapRootReportsToEndpoint flag and perhaps can be corrected with a change to the device json. These Fibaro nodes are somewhat old Zwave protocol 3.5 devices, running Fibaro firmware 2.2.

I tried creating association groups to tie the switches back to the controller, but it did not solve the problem.

Software versions

Driver (node-zwave-js): zwave-js: 14.3.2

Z-Wave JS UI: 9.27.2.b0ade31

Z-Wave Controller (Stick/Dongle/...)

Silicon Labs reference 700 series USB controller - 7..21.5

Note same results on Zooz 700 FW: v7.19.2 (latest available firmware for AU)

Device information

Manufacturer: Fibaro
Model name: Double Relay Switch 2x1.5kW | FGS221 FW v2.2
Node ID: 006 (Playroom AC and Fan PUCK)

Manual https://manuals.fibaro.com/content/manuals/en/FGS-221/FGS-221-EN-A-v1.01.pdf

Checklist

• I made sure to provide a driver log on level debug.

• The log includes a re-interview of the problematic device (if applicable).

• The log includes the problematic interaction with the device (if applicable).

• I provided the node ID of the problematic device (if applicable).

Upload Logfile

In this log file I press button 2 [Endpoint 2] a few times (updates ok), and then button 1 [Endpoint 0] many times (no updates)

first_channel_silent.log

node_6.json
node_6_dump.json

[zwave-js-bot]

👋 Hey @rohrsh!

It looks like you attached a logfile, but its filename doesn't look like it a driver log that came from Z-Wave JS.

Please double-check that you uploaded the correct logfile. If you did, disregard this comment.

As a reminder, here's how to create one:

• Z-Wave JS UI
• Home Assistant Z-Wave Integration
• ioBroker.zwave2 Adapter

[AlCalzone]

Hmm the logfile shows value changes on both endpoint 0 and 2. It looks like the mapping of the root values to endpoint 1 is broken.

[AlCalzone]

This is now tracked as an issue: #7424